Scribd
Upload
55 views

CNC Metal Laser Marking Machine

The document describes a CNC metal laser marking machine. It uses a fiber laser source and high-speed scanning galvanometer system to perform marking. The fiber marking machine has an electro-optical conversion rate over 70% and higher beam quality compared to diode pumped lasers. It requires little maintenance, marks at high speeds, has low power consumption, and can operate in harsh environments using battery power if needed. Accessories include a steel ruler, CD with software and manual, foot switch, power line, USB cable, and software dongle. Figures show aluminum rods and components with laser markings from CAD/CAM datafeed.

Uploaded by

Rishabh Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views

CNC Metal Laser Marking Machine

The document describes a CNC metal laser marking machine. It uses a fiber laser source and high-speed scanning galvanometer system to perform marking. The fiber marking machine has an electro-optical conversion rate over 70% and higher beam quality compared to diode pumped lasers. It requires little maintenance, marks at high speeds, has low power consumption, and can operate in harsh environments using battery power if needed. Accessories include a steel ruler, CD with software and manual, foot switch, power line, USB cable, and software dongle. Figures show aluminum rods and components with laser markings from CAD/CAM datafeed.

Uploaded by

Rishabh Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

CNC METAL LASER MARKING MACHINE

● Machine should be placed in dust-free and no radiation environment, room temperature is


between 15 to 25 degree Celsius

● Adopts fiber laser source (fiber generator ) to output laser, then through high-speed scanning
galvanometer system to fulfill marking function

● The electro-optical conversion rate of fiber marking machine up to more than 70%, compare with
diode pumped laser marking machine, fiber marker owns the higher beam quality.

● Maintenance-free time long

● Marking Speed Faster, with high-speed scanning galvanometer

● No consumables, Low Power Consumption

● Air-cooled completely, don’t need water chiller, energy consumption getting lower

● Not be affected by harsh environment and temperature change, can work with using storage
battery, car cigarette lighter in the condition of blackout

● Products depreciation cost can be got lower heavily, so can fully meet customer volume-produce
and steady production
Tools Crib:

1） Steel Ruler：a tool to measure the focal length

2) CD：includes operation software and user manual

3) Foot Switch：use this switch to control machine to fulfill repeated marking

4） Power Line

5） USB Data Cable：Connect computer and machine to make control machine more easier

6） Software Dog (Dongle)


Fig. Aluminium Rods with Laser markings

Fig. CAD/CAM DataFeed for Laser markings (FOR THIS COMPONENT)


CNC MLS Control Unit Features

Back operation interface consists of double mouth plug, three socket interface, 15 needle port , USB
interface, power master switch, Master power input port, and the radiator.

Doubleheads interface: connect the pedal switch

USB interface: Connect the signal wire, receiving the computer output signal

Power master switch: Connect the whole machine circuit and directly control the galvanometer
system circuit;

Master power input port: Connect the power cord to provide power supply for the host

Radiator: To disperse the heat generated by the host work, to cool the host
CNC Metal Laser Marking Machine CAD/CAM DataFeed Sample

Fig. CAD/CAM DataFeed for Laser Marking

Fig. Output Component Chip with Laser Markings

You might also like