0% found this document useful (0 votes)
128 views1 page

Ejemplo Wps

This document summarizes welding procedure specifications for single V-groove butt joints in ASTM A36 steel using the mechanized FCAW-G process. Key details include: - Welds will be multi-pass stringer beads deposited with an ER70S-6 electrode in the flat position. - Interpass temperature must be maintained between 150-500°F. - Welding parameters are 26-30 volts, 500-600 amps, and a travel speed of 20-25 inches per minute. - The welding procedure is qualified for full penetration groove welds 3/4 to 2.5 inches thick.

Uploaded by

Isaac Gutierrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
128 views1 page

Ejemplo Wps

This document summarizes welding procedure specifications for single V-groove butt joints in ASTM A36 steel using the mechanized FCAW-G process. Key details include: - Welds will be multi-pass stringer beads deposited with an ER70S-6 electrode in the flat position. - Interpass temperature must be maintained between 150-500°F. - Welding parameters are 26-30 volts, 500-600 amps, and a travel speed of 20-25 inches per minute. - The welding procedure is qualified for full penetration groove welds 3/4 to 2.5 inches thick.

Uploaded by

Isaac Gutierrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ANNEX M AWS D1.1/D1.

1M:2015

01/03/2015
Company Name WPS No. Rev. No. Date
01/03/2015 No
Authorized by Date Supporting PQR(s) CVN Report

Type or AWS
Specification Grade Group No. As-Welded With PWHT
Base Material ASTM A36 – II CJP Groove Welds > 3/4–2.5 in –
Welded To ASTM A36 – II CJP Groove w/CVN – –
Backing Material ASTM A36 – – PJP Groove Welds – –
Other Fillet Welds – –
– –

(Sketch)
Groove Type Single V Groove Butt Joint
Groove Angle 20°
Root Opening 5/8 in
Root Face –
None
Method –

Temperature N.A.
Time at Temperature –
Other –

Weld Layer(s) All


Weld Pass(es) All

Type (Semiautomatic, Mechanized, etc.) Mechanized


F
A5.17
AWS Classification EM12K
Electrode Diameter 5/32 in
Electrode/Flux Classification F7A2-EM12K
Manufacturer/Trade Name (Flux XYZ)
Supplemental Filler Metal –
150°F min.
Interpass Temperature 500°F max.
— — — — — — — —
Current Type & Polarity DCEP
Amps 500–600
Volts 26–30
Wire Feed Speed –
Travel Speed 20–25 ipm
Maximum Heat Input –
— — — — — — — —
Stringer or Weave Stringer
Multi or Single Pass (per side) Multipass
Number of Electrodes 1
Longitudinal Spacing of Arcs –
Lateral Spacing of Arcs –
Angle of Parallel Electrodes –
Angle of Electrode (Mech./Auto.) 5° ± 2°
Normal To Direction of Travel 90° ± 2°
Oscillation (Mechanized/Automatic) None
Traverse Length –
Traverse Speed –
Dwell Time –
Peening None
Interpass Cleaning Slag Removed

Form M-2 (See http://go.aws.org/D1forms)

You might also like