Scribd
Upload
307 views6 pages

Mesh Analysis - Lab Template 58

1. This document provides instructions for an experiment on mesh and nodal analysis of an electrical circuit. 2. The aim is to perform mesh analysis to find branch currents, nodal analysis to find voltages, and measure currents and voltages in a given circuit. 3. The experiment covers Kirchhoff's laws, mesh analysis, nodal analysis, and instructions for setting up the circuit, making calculations, recording measurements, and analyzing results.

Uploaded by

Abdul Saliq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
307 views6 pages

Mesh Analysis - Lab Template 58

1. This document provides instructions for an experiment on mesh and nodal analysis of an electrical circuit. 2. The aim is to perform mesh analysis to find branch currents, nodal analysis to find voltages, and measure currents and voltages in a given circuit. 3. The experiment covers Kirchhoff's laws, mesh analysis, nodal analysis, and instructions for setting up the circuit, making calculations, recording measurements, and analyzing results.

Uploaded by

Abdul Saliq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

EEE1001 Basic Electrical and Electronics Engineering

Title: Mesh & Nodal analysis of a given circuit

Student Name: :______________________


Student ID:__________________________
Mesh And Nodal Analysis of a given Electrical Circuit

Aim/Objective:
1. Mesh analysis of given electrical circuit.
2. Finding branch currents in a given electrical circuit.
3. Measuring the nodal voltages.

Equipment/Components Required:

S.No Device Type Rating Quantity


1 Power Supply DC, 0 – 30 V, 10A 1
Variable
2 Ammeter Digital 0 – 100 mA 1
3 Voltmeter Digital 0 – 30 V 2
4 Breadboard 1
5 Resistors Carbon 330 Ω , 390 Ω , 5
270 Ω , 220 Ω
& 190 Ω
6 Connecting Gaze wire 8
wires

Precautions:
Avoid loose connections. Meters should be adjusted to null deflection.
Connections must be verified before switching ON power supply.
Power supply should be switched OFF before making/breaking circuit connections.
Readings should be taken without parallax error.

1 Mesh And Nodal Analysis of a given Electrical Circuit | 19BBS0058


Theory:

1. Kirchhoff’s Laws

KCL: The algebraic sum of currents at node is equal to zero in an electrical circuit. OR The
sum of currents entering a node is equal to the sum of currents leaving a node in a
electrical circuit.

KVL : IT is the second of his fundamental laws we can use for circuit analysis. His voltage
law states that for a closed loop series path the algebraic sum of all the voltages around
any closed loop in a circuit is equal to zero. This is because a circuit loop is a closed
conducting path so no energy is lost.

ΣV = 0

2. Mesh analysis (or the mesh current method) is a method that is used to solve planar
circuits for the currents (and indirectly the voltages) at any place in the electrical
circuit. Planar circuits are circuits that can be drawn on a plane surface with no wires
crossing each other.

3. Nodal analysis, node-voltage analysis, or the branch current method is a method of


determining the voltage (potential difference) between "nodes" (points where
elements or branches connect) in an electrical circuit in terms of the branch currents.

2 Mesh And Nodal Analysis of a given Electrical Circuit | 19BBS0058


Circuit Diagram:

Figure No 1 Electric circuit connection diagram


Note: Draw neatly with pencil and include ratings

Calculations:

3 Mesh And Nodal Analysis of a given Electrical Circuit | 19BBS0058


Experimental Results:
Table No 1

CURRENT IN mA I1 I2 I3
MEASURED VALUE
CALCULATED VALUE

Table No 2

VOLTAGE IN mV V1 V2

MEASURED VALUE
CALCULATED VALUE

Analysis of Results & Conclusion:

4 Mesh And Nodal Analysis of a given Electrical Circuit | 19BBS0058


5 Mesh And Nodal Analysis of a given Electrical Circuit | 19BBS0058

You might also like