Scribd
Upload
65 views3 pages

Etrhjm

This document contains information and calculations for pressure drop and dynamic pressure in pipe systems. It includes input sections for defining pipe geometry, fluid properties, and flow parameters. It then shows lookup values, calculations, and results for laminar and turbulent pressure drops, dynamic pressure, and pressure changes along pipe runs between defined locations. The overall pressure change between the start and end of the system is provided.

Uploaded by

osama alabsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
65 views3 pages

Etrhjm

This document contains information and calculations for pressure drop and dynamic pressure in pipe systems. It includes input sections for defining pipe geometry, fluid properties, and flow parameters. It then shows lookup values, calculations, and results for laminar and turbulent pressure drops, dynamic pressure, and pressure changes along pipe runs between defined locations. The overall pressure change between the start and end of the system is provided.

Uploaded by

osama alabsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Viscous Pressure Loss Hacker

I N P U T - C O M P U T E D ANSWER
Geometry Definition Fluid Definition Kinematic Viscosity Friction Factor Pressure Drop VISCOUS
Diameter- Inch Length - Feet Length - Inch Flow Rate - GPM Temperature F Centistokes SpGr ft^2/sec Vel - fps Rn Laminar Turbulent lam psi turb psi PRESSURE DROP

Location Look-Up Calculated


0.5 100 1200 10 -25 1500 0.7 VISC 0.01614 16.34 42.18298 1.5172 0.124152 4582.782 374.9507 4583
0.5 10 120 25 100 100 0.7 VISC 0.001076 40.85 1581.862 0.040459 0.05017 76.3797 94.69921 95
DYNAMIC PRESSURE HACKER

I N P U U T - C A L C ANS
Geometry FlowRate FlowSPGR VELOCITY DYN PRES Dyn Pres Dyn Pres
Diameter- Inch GPM Ft/Sec PSF psi psi
LOCATION
Example 0.5 10 0.7 16.34 181.2339 1.258569 1
0.5 1000 25 ### 100 0.7 DYN 0.001076 40.85 1581.862 0.040459 0.05017 1132.712 7.866057 8
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
COLD STARTE-UP to the Big Cylinder

I N P U T - C O M P U T E D ANSWER
Geometry Definition Fluid Definition Kinematic Viscosity Friction Factor Pressure Drop VISCOUS
Diameter- Length - Fe Length - In Flow Rate TemperaturCentistoke SpGr ft^2/sec Vel - fps Rn Laminar Turbulent lam psi turb psi PRESSURE PRESSURE

Location Look-Up Calculated DROP 3000.00


10-20a 0.75 20 240 10 -25 1500 0.7 VISC 0.01614 7.262222 28.12199 2.275799 0.137396 181.0482 10.92875 181
at 20a 2818.95

I N P U T - C A L C ANS
Geometry FlowRate FlowSPGR DYN VELOCITY DYN PRES Dyn Pres FACTOR Dyn Pres
Diameter- Inch GPM Ft/Sec PSF psi psi
LOCATION 2818.95
20a-20b 0.75 10 0.7 DYN 7.262222 35.7993 0.248606 2 0.5
at 20b 2818.45
21a-21b 0.75 10 0.7 DYN 7.262222 35.7993 0.248606 3 0.7
at 21b 2817.71
22a-22b 0.25 6 0.7 DYN 39.216 ServoValve full open 1043.908 7.249358 3 21.7
at 22b 2795.96
24a-24b 0.5 6 0.7 DYN 9.804 65.24422 0.453085 2 0.9
at 24b 2795.05
24-40 0.5 15 180 6 -25 1500 0.7 VISC 0.01614 9.804 25.30979 2.528666 0.141063 412.4504 23.00542 412
at 40 port 2382.60
Variable load, Now calculate back from Reservoir 100.00
30-1 1 15 180 10 -25 1500 0.7 VISC 0.01614 4.085 21.09149 3.034399 0.147642 42.96358 2.090128 43
at 30b 142.96
30a-30b 1 8 0.7 DYN 3.268 7.249358 0.050343 2 0.1
at 30a 143.06
28a-28b 1 8 0.7 DYN 3.268 7.249358 0.050343 3 0.2
at 28a 143.22
22a-22b 0.25 4 0.7 DYN 26.144 Assm ServoValve full open 463.9589 3.221937 3 9.7
at 22a 152.88
25a-25b 0.75 4 0.7 DYN 2.904889 5.727888 0.039777 2 0.1
at 25a 152.96
41-25a 0.75 18 216 8 -25 1500 0.7 VISC 0.01614 5.809778 22.49759 2.844749 0.145279 130.3547 6.656113 130
at 41 port 283.32

answer DeltaPres Available 2099.29

You might also like