SM/wr , 07/28/2019 IDP Fundamentals and Measurements Courses Outlines 431245953.

xls

APPENDIX - 1

Module No. Module Description Course Objectives

At the end of each course, participant will be able to:
 Identify the correct definition of terms used in the oil industry, especially those related to oil and gas production and
C1 processing.
Definition of Terms
Prod/Process

 Identify the differences between single-phase flow and multiphase flow.

 Identify the types of single-phase flow.
C2
 Predict pressure losses for single-phase flow in pipelines.
Prod/Process Basics of Fluid Flow
 Select the proper sizes of piping for different single-phase flow rates.
 Identify the parameters affecting pressure losses for single-phase flow in pipelines.

 Identify the common valve types.

 Identify the classification of valves by function.
C3  Identify the control valve types and principles of selection.
Valves
Prod/Process  Identify the relief valves, safety valves and safety relief valves.
 Identify the types of valve actuators and principles of operation.

 Explain what is the Net Positive Suction Head of a pump.

 Calculate the Horsepower of a pump.
C4  Determine pump performance and how to use pump performance curves.
Pumps
Prod/Process  Explain pump classifications.
 Discuss troubleshooting of centrifugal and reciprocating pumps.

 Identify the main terms and their interrelation in compressor operations.

 Describe the main parts of centrifugal compressors.
C5
Compressors  Describe the main parts of reciprocating compressors.
Prod/Process
 Understand compressor troubleshooting.

 Identify the factors affecting heat transfer.

 Describe heat transfer equipment.
C6
Heat Exchangers  Describe the different types of heat exchanger.
Prod/Process
 Identify the temperature control.

 Identify the types of boilers.

 Identify the uses of steam generated by boilers.
C7  Identify the major parts of a water tube boiler and explain the function of each part.
Boilers
Prod/Process  Explain the function of deaerators and identify their types.
 Describe ADMA's boilers and explain their control systems.

 Identify and explain the function of each major component of the separator.
 Explain how separators work.
C8  Explain when different separators are used.
Oil & Gas Separators
Prod/Process  Describe how liquid levels and gas pressure are maintained in separators.
 Identify the safety devices for separators.

 Identify the types of liquid meters.

C9  Explain correctly the net oil measuring system and its accuracy.
Liquid Measurement
Prod/Process  Explain the crude oil export measuring system with its meter proving.

 Identify the types of gas meters.

 Select the suitable meter type for a specific system.
 Explain the components of orifice meters.
C10
Gas Measurement  Interpret the orifice meter charts.
Prod/Process
 Discuss the parameters of the orifice flow formula.
 Calculate the gas flow rate using the orifice chart and orifice flow formula.

 Identify the types of storage tanks.

 Identify the main components of a storage tank.
 Explain the tank vent systems.
 Discuss the storage losses and how to minimize them.
C11
Storage Tanks  Select the suitable tank type for a specific product.
Prod/Process
 Identify the tank-associated equipment and the function of each piece of equipment.
 Explain the uses of tanks.
 Discuss the safety procedures for different types of work associated with storage tanks.

F12 Propane Refrigeration  Describe the propane refrigeration unit and identify its components.
Production Unit
 Explain the need for dehydration of natural gas and the effects of water in gas.
 Explain the principles of glycol dehydration including absorption, distillation and heat transfer.
 Trace the flow of wet and dry gas, as well as wet and dry glycol, in a typical dehydration system.
 Explain the purpose of each component of the process.
F13  Explain how each component in the system operates.
Gas Dehydration
Production  Monitor the system and make necessary adjustments.
 Discuss the effects of process variables on natural gas dehydration.
 Perform routine operation of the system.
 Troubleshoot common problems affecting proper operation of the system.

 Define the free water and water cut.

 Explain the differences between free water and emulsified water.
 Identify the emulsifying agents.
D14 Crude Oil Dehydration &
 Understand the crude oil dehydration and desalting process.
Process Desalting
 Describe the heater treater and identify its sections and internals.
 Explain the dehydration and desalting parameters and their effect on water-oil emulsions.

 Identify the purposes of crude stripping and stabilization.

 Describe the cold stripping unit and its operation.
D15 Crude Stripping &  Sketch a simplified overview of a cold stripping unit.
Process Stabilization  Identify the main items of equipment involved in the system.
 Explain the control system of a cold stripping unit.
 Explain the safety procedures for cold strippers during start-up, normal operation and emergency shutdown.

 Identify the reasons for gas sweetening.

 Describe the gas sweetening unit.

D16  Explain the functions of different unit components.

Gas Sweetening  Sketch a simplified overview of gas sweetening unit.
Process
 Explain the DEA regeneration process.
 Explain the control system of the unit.
 Schedule
for APPENDIX - 2
IDP Gap Elemination Training Courses

VISITS FIRST VISIT SECOND VISIT

Months JUNE JULY A
RUN - 1 RUN - 2 RUN - 3 RUN - 4
Days of the Month 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1
Days of the Week M T W T F S S M T W T F S S M T M T W T F S S M T W T F S S M T

Modules
C1 Definition of Terms C1 C1 C1 C1

C2 Basics of Fluid C2 C2 C2 C2

C3 Valves C3 C3 C3 C3

C4 Pumps C4 C4 C4 C4

C5 Compressors C5 C5 C5 C5

C6 Heat Exchangers C6 C6 C6 C6

C7 Boilers C7 C7 C7 C7

C8 Oil & Gas Separators C8 C8 C8 C8

C9 Liquid Measurement C9 C9 C9 C9

C10 Gas Measurement C10 C10 C10 C10 C10

C11 Storage Tanks C11 C11 C11 C11

F12 Propane Refrigeration Unit F12 F12 F12 F12

D14 Crude Oil Dehydration & Desalting D14 D14 D14 D14

F13 Gas Dehydration F13 F13 F13 F13

D15 Crude Stripping & Stabilization D15 D15 D15 D15

D16 Gas Sweetening D16 D16 D16 D16

MS/wr/431245953.xls 07/28/2019
 Schedule
for APPENDIX - 2
IDP Gap Elemination Training Courses

REVIEW R R R R

MS/wr/431245953.xls 07/28/2019
 Revised Schedule
for APPENDIX - 2
IDP Gap Elemination Training Courses

VISITS SECOND VISIT

Months JULY A
RUN - 3 RUN - 4
Days of the Month 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1
Days of the Week M T W T F S S M T W T F S S M T

HOURS
Modules
C1 Definition of Terms 3 hrs C1 C1

C2 Basics of Fluid 3 hrs C2 C2

C3 Valves 3 hrs C3 C3

C6 Heat Exchangers 2 hrs C6 C6

C7 Boilers 1 hrs C7 C7

C4 Pumps 3 hrs C4 C4

C5 Compressors 3 hrs C5 C5

C11 Storage Tanks 2 hrs C11 C11

C9 Liquid Measurement 2 hrs C9 C9

C10 Gas Measurement 2 hrs C10 C10 C10

C8 Oil & Gas Separators 4 hrs C8 C8

D16 Gas Sweetening by DEA 2 hrs D16 D16

F12 Propane Refrigeration 1 hrs F12 F12

F13 Gas Dehydration 5 hrs F13 F13

D14 Crude oil Dehydration & Desalting 5 hrs D14 D14

MS/wr/431245953.xls 07/28/2019
 Revised Schedule
for APPENDIX - 2
IDP Gap Elemination Training Courses

D15 Crude Stripping & Stabilization 1 hrs D15 D15

REVIEW R R

MS/wr/431245953.xls 07/28/2019
 IDP Gap Elemination Training Required Material

Modules Copies Copies to Modules Copies Copies to

Total Total
Available Print Available Print

C1 Definition of Terms 10 5 15 C9 Liquid Measurement 8 7 15

C2 Basics of Fluid 13 2 15 C10 Gas Measurement 9 6 15

C3 Valves 8 7 15 C11 Storage Tanks 12 3 15

C4 Pumps 9 6 15 F12 Propane Refrigeration Unit 11 4 15

C5 Compressors 7 8 15 D14 Crude Oil Dehydration & Desalting 16 0 16

C6 Heat Exchangers 10 5 15 F13 Gas Dehydration 13 2 15

C7 Boilers 10 5 15 D15 Crude Stripping & Stabilization 13 2 15

C8 Oil & Gas Separators 9 6 15 D16 Gas Sweetening 13 2 15

MS/wr/431245953.xls 07/28/2019
 NOMINATION FORM
FOR
IDP GAP ELEMINATION TRAINING COURSES

MODULES C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 F12 D14 F13 D15 D16

COURSE DATES AND RUNS (Please refer to the Course Schedule ( Appendix 2) for Run Nos. to inster under these colums)

NAME P/F
 NOMINATION FORM
FOR
IDP GAP ELEMINATION TRAINING COURSES