Form 1.

SELF-ASSESSMENT CHECK

INSTRUCTIONS: This Self-Check Instrument will give the trainer necessary

data or information which is essential in planning training
sessions. Please check the appropriate box of your answer
to the questions below.

BASIC COMPETENCIES
CAN I…? YES NO

Participate in workplace communication

1. Obtain and convey workplace information 
2. Participate in workplace meetings and discussions 
3. Complete relevant work related documents 

Work in team environment

1. Describe team role and scope 
2. Identify own role and responsibility within team 
3. Work as a team member 

Practice carrier professionalism

1. Integrate personal objectives with organizational goals 
2. Set and meet work priorities 
3. Maintain professional growth and development 

Practice occupational health and safety procedures

1. Identify hazards and risks 
2. Evaluate hazards and risks 
3. Control hazards and risks 
4. Maintain OHS awareness 

COMMON COMPETENCIES
CAN I…? YES NO

Use Hand Tools

1. Plan and prepare for tasks to be undertaken 
2. Prepare hand tools 
3. Use appropriate hand tools and test equipment 
4. Maintain hand tools 

Perform Mensuration and Calculation

1. Select measuring instruments 
2. Carry out measurements and calculation 
3. Maintain measuring instruments 
 Form 1.3

Prepare and Interpret Technical Drawing

1. Identify different kinds of technical drawings 
2. Interpret technical drawing 
3. Prepare/ make changes to electrical/ electronic schematics and drawings 
4. Store technical drawings and equipment/ instruments 

Apply Quality Standards

1. Assess quality of received materials or components 
2. Assess own work 
3. Engage in quality improvement 

Terminate and Connect Electrical Wiring and Electronic Circuits

1. Plan and prepare for termination/ connection of electrical wiring/electronics

circuits
2. Terminate/ connect electrical wiring/ electronic circuits 
3. Test termination/ connections of electrical wiring/ electronics circuits 

CORE COMPETENCIES
CAN I…? YES NO

Perform roughing-in activities, wiring and cabling works for single-phase

distribution, power, lighting and auxiliary systems
1. Install electrical metallic /non- metallic (PVC conduit) 
2. Install wire ways and cable tray 
3. Install auxiliary terminal cabinet and distribution panel 
4. Prepare for cable pulling and installation 
5. Perform wiring and cabling lay out 
6. Notify completion of work 

Install electrical protective devices for distribution, power, lighting,

auxiliary, lightning protection and grounding systems
1. Plan and prepare work 
2. Install electrical protective devices 
3. Install lighting fixture and auxiliary outlet. 
4. Notify completion of work. 

Install wiring devices of floor and wall mounted outlets, lighting fixtures/switches,
and auxiliary outlets
1. Select wiring devices 
2. Install wiring devices 
3. Install lighting fixture/ switches 
4. Notify completion of work 
 Form 1.3

Evidences/Proof of Current Competencies

Means of
Current Competencies Proof/Evidence
validating
BASIC COMPETENCY

Participate in workplace communication

1. Obtain and convey workplace
OJT Certificate Interview
information
2. Participate in workplace meetings
OJT Certificate Interview
and discussions
3. Complete relevant work related
OJT Certificate Interview
documents

Work in team environment

1. Describe team role and scope OJT Certificate Interview
2. Identify own role and responsibility
within team OJT Certificate Interview
3. Work as a team member OJT Certificate Interview

Practice carrier professionalism

1. Integrate personal objectives
OJT Certificate Interview
with organizational goals
2. Set and meet work priorities OJT Certificate Interview
3. Maintain professional growth and
Certificate of Training Demonstration
development

Practice occupational health and safety procedures

1. Identify hazards and risks OJT Certificate Interview

2. Evaluate hazards and risks OJT Certificate Interview
3. Control hazards and risks OJT Certificate Interview
4. Maintain OHS awareness OJT Certificate Interview

COMMON COMPETENCY
Use Hand Tools

1. Plan and prepare for tasks to be OJT Certificate Demonstration

undertaken
2. Prepare hand tools OJT Certificate Demonstration
3. Use appropriate hand tools and test
OJT Certificate Demonstration
equipment
 Form 1.3

4. Maintain hand tools OJT Certificate Demonstration

Perform Mensuration and Calculation

1. Select measuring instruments

OJT Certificate Demonstration

2. Carry out measurements and OJT Certificate Demonstration

calculation
3. Maintain measuring instruments OJT Certificate Demonstration

Prepare and Interpret Technical Drawing

1. Identify different kinds of technical
drawings OJT Certificate Demonstration
2. Interpret technical drawing OJT Certificate Demonstration
3. Prepare/ make changes to electrical/
electronic schematics and drawings
OJT Certificate Demonstration
4. Store technical drawings and
equipment/ instruments OJT Certificate Demonstration

Apply Quality Standards

1. Assess quality of received materials OJT Certificate Demonstration
or components

2. Assess own work OJT Certificate Demonstration

3. Engage in quality improvement OJT Certificate Demonstration

Terminate and Connect Electrical Wiring and Electronic Circuits

1. Plan and prepare for termination/

connection of electrical OJT Certificate Demonstration
wiring/electronics circuits
2. Terminate/ connect electrical wiring/
electronic circuits OJT Certificate Demonstration
3. Test termination/ connections of
electrical wiring/ electronics circuits OJT Certificate Demonstration

CORE COMPETENCY
Perform roughing-in activities, wiring and cabling works for single-phase
distribution, power, lighting and auxiliary systems
1. Install electrical metallic /non-
metallic (PVC conduit) OJT Certificate Demonstration
2. Install wire ways and cable tray OJT Certificate Demonstration
 Form 1.3

3. Install auxiliary terminal cabinet and

distribution panel OJT Certificate Demonstration
4. Prepare for cable pulling and
installation OJT Certificate Demonstration
5. Perform wiring and cabling lay out OJT Certificate Demonstration
6. Notify completion of work OJT Certificate Demonstration

Install electrical protective devices for distribution, power, lighting, auxiliary,

lightning protection and grounding systems
1. Plan and prepare work OJT Certificate Demonstration
2. Install electrical protective devices
OJT Certificate Demonstration
3. Install lighting fixture and auxiliary
outlet. OJT Certificate Demonstration
4. Notify completion of work. OJT Certificate Demonstration

Install wiring devices of floor and wall mounted outlets, lighting fixtures/switches, and
auxiliary outlets
1. Select wiring devices OJT Certificate Demonstration
2. Install wiring devices OJT Certificate Demonstration
3. Install lighting fixture/ switches OJT Certificate Demonstration
4. Notify completion of work OJT Certificate Demonstration
 Form 1.3

Summary of Current Competencies versus Required Competencies

Required Units of
Training
Competency/Learning Current Competencies
Gaps/Requirements
Outcomes based on CBC

BASIC COMPETENCY

Participate in workplace Participate in workplace

communication communication
Work in team environment Work in team environment

Practice carrier Practice carrier

professionalism professionalism
Practice occupational health Practice occupational health
and safety procedures and safety procedures

COMMON COMPETENCY

Use Hand Tools Use Hand Tools

Perform Mensuration and Perform Mensuration and

Calculation Calculation
Prepare and Interpret Prepare and Interpret
Technical Drawing Technical Drawing
Apply Quality Standards Apply Quality Standards

Terminate and Connect Terminate and Connect

Electrical Wiring and Electrical Wiring and
Electronic Circuits Electronic Circuits

CORE COMPETENCY

Perform roughing-in Perform roughing-in

activities, wiring and activities, wiring and
cabling works for single- cabling works for single-
phase distribution, power, phase distribution, power,
lighting and auxiliary lighting and auxiliary
systems systems
 Form 1.3

Install electrical protective Install electrical protective

devices for distribution, devices for distribution,
power, lighting, auxiliary, power, lighting, auxiliary,
lightning protection and lightning protection and
grounding systems grounding systems
Install wiring devices of floor Install wiring devices of floor
and wall mounted outlets, and wall mounted outlets,
lighting fixtures/switches, and lighting fixtures/switches, and
auxiliary outlets auxiliary outlets
 Form 1.4

Training Needs

Training Needs Module Title/Module of Instruction

(Learning Outcomes)
1. Select wiring devices

2. Install wiring devices

Installing wiring devices of floor and wall
mounted outlets, lighting fixtures/switches,
3. Install lighting fixture/ switches and auxiliary outlets

4. Notify completion of work