Scribd
Upload
229 views

Pump Data Sheet

This document provides specifications for a pump including: - The pump will handle water at a capacity of 1 m3/h and head of 10 barg. - Materials of construction include a cast iron casing and carbon steel impeller. - Performance test and hydrostatic test are required to verify the pump's rated capacity and ability to withstand maximum pressure.

Uploaded by

A D MOORTHY
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
229 views

Pump Data Sheet

This document provides specifications for a pump including: - The pump will handle water at a capacity of 1 m3/h and head of 10 barg. - Materials of construction include a cast iron casing and carbon steel impeller. - Performance test and hydrostatic test are required to verify the pump's rated capacity and ability to withstand maximum pressure.

Uploaded by

A D MOORTHY
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

PUMP DATA SHEET

Company: Jindal steel and Power Limited Data Sheet No.:


Project: Project No.:
Type of Pump: PID No:
Date: 4/2/09 Area:
Rev:
PROCESS DATA
Equipment name : Number required (incl. spare) : 1
Liquid pumped : Capacity normal: m³/h ; rated :
Solids : 0 %; max. size : mm Suction pressure min. :
Corrosive/Erosive service : Suction pressure max. :
Pumping temperature (p.t.) : °C Head :
Pumping temperature max. : °C Shut-off head :
Density at pumping temperature : kg/m³ NPSH available :
Viscosity at pumping temperature : mPa.s NPSH required :
Vapour pressure at pumping temp. : bara Area classification :
MECHANICAL DATA

Manufacturer (MFR) : Nozzles Nom. diameter Rating Type/Fac.

Standard applicable : Suction

Model : Discharge

Arrangement : Vent/Drain

Rotation facing coupling : * Cooling

Number of stages : Flushing

Self priming : Hydraulic power at rated capacity :

Design pressure : barg Hydraulic efficiency at rated capacity :

Design temperature : °C Power required :

Max. allow. operating pressure : barg Power installed :

Casing split : Pump speed :

Impeller type : Driver speed :

Impeller diameter supplied : mm Pump drive :

Impeller diameter min. : mm ; max : mm Weight pump :

Bearings : axial ; type: Weight driver :

Bearings : radial ; type:

Bearings : intermittent ; type: Test Required Witnessed

Bearing lubrication : Performance

Coupling : ; type : Hydrostatic

Coupling guard : ; type : NPSH


MECHANICAL SEAL

MFR : ;type : Flushing plan standard : :

Flushing liquid : Flushing plan :

Flushing liquid flow rate : m³/h Flushing liquid design pressure : barg
MATERAIL OF CONSTRUCTION

Casing and cover : Neck Ring :

Impeller : Gland :

Shaft : Flange :

Shaft sleeve :
m³/h
barg
barg
m. liq.
m. liq.
m. liq.
m. liq.

Pos.

kW

kW

kW

rpm

rpm

kg

kg

You might also like