0% found this document useful (0 votes)
35 views

Preliminary Draft

The document outlines the design requirements for a sprinkler system including: 1) The occupancy is classified as both light hazard and ordinary hazard, with ordinary hazard selected for design; 2) The minimum water supply requirements are a residual pressure of 1.4 bar, a flow rate of 5680 L/min, and a duration of 90 minutes; 3) The maximum protection area is 100 square feet for ordinary hazard areas; and 4) The maximum sprinkler spacing is 15 feet.

Uploaded by

rukesh104
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
35 views

Preliminary Draft

The document outlines the design requirements for a sprinkler system including: 1) The occupancy is classified as both light hazard and ordinary hazard, with ordinary hazard selected for design; 2) The minimum water supply requirements are a residual pressure of 1.4 bar, a flow rate of 5680 L/min, and a duration of 90 minutes; 3) The maximum protection area is 100 square feet for ordinary hazard areas; and 4) The maximum sprinkler spacing is 15 feet.

Uploaded by

rukesh104
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sprinkler System Design

1. Occupancy Classification:
a. Light hazard – hotel rooms, banquet hall, restaurant seating areas, offices
b. Ordinary hazard – basement parking, kitchens, stores, housekeeping

2. Minimum water supply requirement:


a. Minimum residual pressure:
i. Light hazard – 1bar
ii. Ordinary hazard – 1.4bar
Hence, select 1.4bar for design.
b. Acceptable flow rate:
i. Light hazard – 2840L/min
ii. Ordinary hazard – 5680L/min
Hence, select 5680L/min for design.
c. Duration:
i. Light hazard – 60min
ii. Ordinary hazard – 90min
Hence, select 90min for design
3. Maximum protection area:
a. Light hazard – 200sq. ft.
b. Ordinary hazard – 100sq. ft.
4. Maximum spacing: 15ft

You might also like