Scribd
Upload
33 views

Astables RC À AOP: Exercice 1

This document discusses RC astable multivibrators using operational amplifiers. It provides examples of calculating timing parameters for different RC astable multivibrator circuit configurations, including the high and low threshold voltages, the high and low pulse durations, the duty cycle, and the total period. Formulas are given for calculating these values based on the circuit components. Exercises are included that walk through example calculations for various RC astable multivibrator circuits.

Uploaded by

Yacin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

Astables RC À AOP: Exercice 1

This document discusses RC astable multivibrators using operational amplifiers. It provides examples of calculating timing parameters for different RC astable multivibrator circuit configurations, including the high and low threshold voltages, the high and low pulse durations, the duty cycle, and the total period. Formulas are given for calculating these values based on the circuit components. Exercises are included that walk through example calculations for various RC astable multivibrator circuits.

Uploaded by

Yacin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

electroussafi.ueuo.

com 1/4

Astables RC à AOP

Exercice 1

1. On a deux seuils de basculement : v+ = ±Vsat

V1 = 11V x10/(10+10) V1 = 5,5V

V2 = -10,5V x10/(10+10) V2 = -5,25V

2.

3.

VH = +Vsat = 11V VB = -Vsat = -10,5V V1 = 5,5V V2 = -5,25V

tH = RCLn

tH = 10.103.10-6 Ln [(11- (-5,25))/(11 - 5,5)] tH = 10,83ms

tB = RCLn

tB = 10.103.10-6 Ln [(-10,5 - 5,5)/(-10,5 – (-5,25))] tB = 11,14ms

T = tH +tB = 10,83ms + 11,14ms T = 21,97 ≈ 22ms

N. ROUSSAFI electroussafi.ueuo.com Astables RC à AOP


electroussafi.ueuo.com 2/4

Exercice 2

1. La diode D1 permet la charge du condensateur à travers la résistance R1 lorsque


Vs = +Vsat.

La diode D2 permet la décharge du condensateur dans la résistance R2 lorsque


Vs = -Vsat.

2. On a deux seuils de basculement : v+ = ±Vsat

V1 = 11V x2,2/(2,2+2,2) V1 = 5,5V

V2 = -10,5V x2,2/(2,2+2,2) V2 = -5,25V

3. VH = +Vsat - VD = 11V – 0,6V = 10,4V


VB = -Vsat + VD = -10,5V + 0,6V = -9,9V
V1 = -5,25V V2 = +5,5V

tH = RCLn

tH = 3,3.103.10-6 Ln [(10,4 – (-5,25))/(10,4 - 5,5)] tH = 3,83ms

tB = RCLn

tB = 4,7.103.10-6 Ln [(-9,9 - 5,5)/(-9,9 – (-5,25))] tB = 5,63ms

T = tH + tB = 3,83ms + 5,63ms T = 9,46ms ≈ 9,5ms

4.  = tH / (tH + tB) = 3,83ms/9,46ms  = 0,4


5. Vs = ±Vsat, qui dépend de l’alimentation de l’AOP. Donc l’amplitude maximale
de Vs dépend de l’alimentation de l’AOP.

N. ROUSSAFI electroussafi.ueuo.com Astables RC à AOP


electroussafi.ueuo.com 3/4

Exercice 3

1. On a deux seuils de basculement :

v+ = ±Vsat et ±Vsat = ±(VZ + VD) = ±(4,7V +0,6V) = ±5,3V

V1 = 5,3Vx1,2/(1,2+2,2) V1 = 1,87V

V2 = -5,3Vx1,2/(1,2+2,2) V2 = -1,87V

2. VH = +Vsat = 5,3V VB = -Vsat = -5,3V


tH = 3,3.103.10-6 Ln [(5,3 – (-1,87))/(5,3 - 1,87)] tH = 2,43ms

tB = 3,3.103.10-6 Ln [(-5,3 - 1,87)/(-5,3 – (-1,87))] tB = 2,43ms

T = tH + tB = 2x2,43ms T = 4,86ms ≈ 5ms

3.  = tH / (tH + tB) = tH / 2tH  = 0,5


4.

N. ROUSSAFI electroussafi.ueuo.com Astables RC à AOP


electroussafi.ueuo.com 4/4

Exercice 4

1. v+ = et Vs = ±Vsat +Vsat = Vcc = 5V -Vsat = 0V

On a deux seuils de basculement :

V1 = = V1 = 3,74V

V2 = = V2 = 0,28V

2. VH = +Vsat = 5V VB = -Vsat = 0V
tH = 3,3.103.10-6 Ln [(5 - 0,28)/(5 - 3,74)] tH = 4,36ms

tB = 3,3.103.10-6 Ln [(0 - 3,74)/(0 - 0,28)] tB = 8,55ms

T = tH + tB = 4,36ms + 8,55ms T = 12,91ms ≈ 13ms

3.  = tH / (tH + tB) = tH / T   0,34


4.

N. ROUSSAFI electroussafi.ueuo.com Astables RC à AOP

You might also like