0% found this document useful (0 votes)
65 views1 page

Vertical Submittal Report

This document provides information for analyzing the vertical capacity of a pile group supporting a vertical load of 115 kN and a shear load of 227 kN. It includes soil properties, pile properties, and results of the vertical capacity analysis showing the ultimate and allowable vertical capacities are greater than the applied load and the calculated settlement at the applied load is 0.0026m.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
65 views1 page

Vertical Submittal Report

This document provides information for analyzing the vertical capacity of a pile group supporting a vertical load of 115 kN and a shear load of 227 kN. It includes soil properties, pile properties, and results of the vertical capacity analysis showing the ultimate and allowable vertical capacities are greater than the applied load and the calculated settlement at the applied load is 0.0026m.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

VERTICAL ANALYSIS Figure 1

Loads:
Load Factor for Vertical Loads= 1.0
Load Factor for Lateral Loads= 1.0
Loads Supported by Pile Cap= 0 %
Shear Condition: Static

Vertical Load, Q= 115.0 -kN


Shear Load, P= 227.0 -kN
Moment, M= 0.0 -kN-m

Profile:
Pile Length, L= 27.5 -m
Top Height, H= 0 -m
Slope Angle, As= 0
Batter Angle, Ab= 0

Group and Boundary Condition:


Fixed Head
Sx= 200 -cm
Sy= 150 -cm
Nx= 5
Ny= 2
Driving Concrete Pile

Soil Data: Pile Data:


Depth Gamma Phi C K e50 or Dr Nspt Depth Width Area Per. I E Weight
-m -kN/m3 -kN/m2 -MN/m3 % -m -cm -cm2 -cm -cm4 -MP -kN/m
0 14.9 25.0 0.0 1.4 0.00 0 0.0 60 2827.4 188.5 636172.5 20683 6.673
4 19.1 36.7 0.0 30.8 55.31 21 27.5 60 2827.4 188.5 636172.5 20683 6.673
8 19.1 36.6 0.0 30.2 54.76 21
12 18.5 34.2 0.0 17.0 41.10 13
16 20.4 40.0 0.0 74.9 85.29 50
20 20.6 40.3 0.0 78.7 87.32 52
24 21.5 42.1 0.0 96.4 95.94 60
28 21.5 42.1 0.0 96.4 95.94 60
30 21.5 42.1 0.0 96.4 95.94 60

Group Vertical capacity:


Total Ultimate Capacity (Down)= 195742.688-kN Total Ultimate Capacity (Up)= 35902.582-kN
Total Allowable Capacity (Down)= 65247.563-kN Total Allowable Capacity (Up)= 13190.906-kN
OK! Qallow > Q

Group Settlement Calculation:


At Xallow= 2.50-cm Qallow= 64124.09-kN
At Q= 115.00-kN Settlement= 0.00260-cm

Note: If program can't find result or the result exceeds the up limits. The result shows 9999.

CivilTech
Software

You might also like