Scribd
Upload
304 views3 pages

Aetina Carrier AN310 Datasheet v03

The document describes the AN310 carrier board for Nvidia Jetson TX1 and TX2 modules. It has a small form factor of 87x70mm, supports up to 6 cameras via CSI connectors, has interfaces like HDMI, Ethernet, USB 3.0 and more. It is suitable for applications in robotics, drones, medical and deep learning within an operating temperature range of -40°C to 85°C. The document provides specifications, diagrams, ordering information and accessories for the AN310 carrier board.

Uploaded by

soorya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
304 views3 pages

Aetina Carrier AN310 Datasheet v03

The document describes the AN310 carrier board for Nvidia Jetson TX1 and TX2 modules. It has a small form factor of 87x70mm, supports up to 6 cameras via CSI connectors, has interfaces like HDMI, Ethernet, USB 3.0 and more. It is suitable for applications in robotics, drones, medical and deep learning within an operating temperature range of -40°C to 85°C. The document provides specifications, diagrams, ordering information and accessories for the AN310 carrier board.

Uploaded by

soorya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

www.aetina.

com

AN310
Features

• Smallest design for Nvidia TX2/TX1


• Specifically designed for high performance and low-power envelope AI computing
• Connect with CSI adapter can support up to 6 camera (6 x2Lanes or 3x 4Lane)
• Extended temperature range -40°C to 85°C
• Suitable for general robotics, Drone, UAV, industrial inspection, medical imaging and
deep learning

Specifications

Dimension
Carrier 87 x 70mm
Support Module
Nvidia Jetson TX2 Module (87 x 50mm)
Nvidia Jetson TX1 Module (87 x 50mm)

Carrier I/O Interface


1x HDMI Type A
1x RJ-45 for GbE
2x USB3.0 Type A
1x USB2.0 Micro AB
1x mPCIe(Compatible with mSATA)
1x RS-232
5x GPIO
1x I2C
1
2x CAN BUS
1x Front Panel(Power/Reset/Recovery/Sleep)
1x DC-in 9~19V (2 Pin Euroblock)
1x MIPI CSI-II connector( 120pin)

Operating Temperature
-40°C ~ +85°C (Standard temperature)
Operating Humidity
10% ~ 90%
Storage Temperature
-40°C ~ +125°C

1. CAN BUS function only work on TX2. TX1 not support

v03
www.aetina.com

Block Diagram

DP1 USB2.0
HDMI USB2.0 Micro AB OTG

GPIO_1/2/3/4/5 USB_SS0/SS1
GPIO USB3.0 x2 STACK MODE

RS232 UART1 SDMMC Micro SD

Nvidia Jetson module


CARD
Debug UART0
UART GBE_MDI
RJ-45 GbE
FAN_PWMOUT
Header PWRBTN#
Power
CAN1/2 On/Off
CAN BUS
SYS_RESET#
I2C_GP1 Reset
I2C
FORCE_RECOVERY
Recovery
I2C
AT/ATX
CSI CSI Switch
12 Lanes adapter
VDD IN
Europblock
UART

Optional

Mechanical

v03
www.aetina.com

Ordering Information

Product name Description

AN310-STD-AN00 AN310 Carrier, Standard temp -40°C to +85°C

AN310-TX1-FN01 AN310 Carrier with Nvidia Jetson TX1 module, Standard temp -25°C to +80°C

AN310-TX1-FN02 AN310 + TX1 Module + FAN + Cable Kit + Power Adapter and Power Cord -25°C to +80°C

AN310-TX2-FN01 AN310 Carrier with Nvidia Jetson TX2 module, Standard temp -25°C to +80°C

AN310-TX2-FN02 AN310 + TX2 Module + FAN + Cable Kit + Power Adapter and Power Cord -25°C to +80°C

Accessory (Optional)
MCAC-00000000CA100 CA-A01 6x CSI-2 Camera Carrier Board with FPC

7W9000000040 AN310 Cable kit(CAN bus / UART / RS232 / Front panel / GPIO / I2C)

9Z1253232020 TX1/TX2 Active Heat Sink

9Z2XX4141010 TX1/TX2 Passive Heat Sink

7W8000000040 US Power Cord SVT 18AWG Cable 1800mm Black 105 °C

7W8000000050 EU Power Cord H05VV-F 0.75mm2/3G SL-6+SL-3 Cable 1800mm Black

9Z3BC0000020 100-240V 60W 12V 5A Adapter

Passive Heat Sink Active Heat Sink

12V/5A 60W Adapter


Cable Kit 6 x MIPI CSI-II Camera Board

v03

You might also like