Scribd
Upload
87 views

The Tolerance Unless Classified 0.3mm: Outline Dimension & Block Diagram

This document provides the dimensions, pin assignments, and specifications for an LCD module. It includes: - Dimensional drawings showing the overall size of 146.0 x 43.0 mm and viewable area of 123.0 x 23.0 mm. - Pin assignments for the 16 pin connector including power, data, and control signal pins. - Electrical specifications like voltage ratings, current consumption, and operation voltage ranges. - Backlight current draw of 270 mA for an LED array operating at 4.2V. - Notes that the LCD type can be STN, TN, or FSTN and backlight options include LED or EL. Tolerances are 0.3

Uploaded by

henriquegonfer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

The Tolerance Unless Classified 0.3mm: Outline Dimension & Block Diagram

This document provides the dimensions, pin assignments, and specifications for an LCD module. It includes: - Dimensional drawings showing the overall size of 146.0 x 43.0 mm and viewable area of 123.0 x 23.0 mm. - Pin assignments for the 16 pin connector including power, data, and control signal pins. - Electrical specifications like voltage ratings, current consumption, and operation voltage ranges. - Backlight current draw of 270 mA for an LED array operating at 4.2V. - Notes that the LCD type can be STN, TN, or FSTN and backlight options include LED or EL. Tolerances are 0.3

Uploaded by

henriquegonfer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PC 2002-L

OUTLINE DIMENSION & BLOCK DIAGRAM

146.0 + 0.5
3.5 139.0
18.0 P2.54 x 13=33.02 H1

2.5
1.8 14- 1.0 4- 3.5 H2

1 14
1.5 1.5

43.0 0.5
K

36.0
18.97
23.0

16.0
33.8

7.0

A
20.5

12.5
6- 1.0 118.84 1.6

3.5
3.6

123.0
134.0
73.0

DB7 COM 16
LCD PANEL 6.0
LCD
DB0 CONTROLLER 4.84
LSI 0.92
E
R/W SEG 40 SEG 60 0.06
RS
Vss
Vdd
Vo CONTROL SIGNALS 4

9.22
1.1
0.06
9.75
SEGMENT DRIVER

A
K BACKLIGHT

The tolerance unless classified 0.3mm

MECHANICAL SPECIFICATION
Overall Size 146.0 x 43.0 Module H2 / H1
View Area 123.0 x 23.0 W /O B/L 5.1 / 9.7
Dot Size 0.92 x 1.10 EL B/L 5.1 / 9.7
Dot Pitch 0.98 x 1.16 LED B/L 9.1 / 13.7

ABSOLUTE MAXIMUM RATING


PIN ASSIGNMENT
Item Symbol Condition Min. Max. Units
Pin no. Symbol Function Vdd-Vss
Supply for logic voltage 25oC -0.3 7 V
1 Vss Power supply(GND) LCD driving supply voltage Vdd-Vee 25oC -0.3 13 V
2 Vdd Power supply(+) Input voltage Vin 25oC -0.3 Vdd+0.3 V
3 Vo Contrast Adjust ELECTRICAL CHARACTERISTICS
4 RS Register select signal Item Symbol Condition Min. Typical Max. Units
5 R/W Data read / write Power supply voltage Vdd-Vss 25oC 2.7 5.5 V
6 E Enable signal Top N W N W N W V
7 DB0 Data bus line -20oC 7.1 7.5 7.9 V
8 DB1 Data bus line 0oC 4.6 4.9 V 5.2
LCD operation voltage Vop
9 DB2 Data bus line 25oC 4.2 6.1 4.5 6.4 4.8 6.7
V
10 DB3 Data bus line 50oC 3.9 4.2 4.5 V
11 DB4 Data bus line 70oC 5.7 6 6.3 V
12 DB5 Data bus line LCM current consumption (No B/L) Idd Vdd=5V 2 3 mA
13 DB6 Data bus line LED/edge VB/L=4.2V mA
Backlight current consumption
14 DB7 Data bus line LED/array VB/L=4.2V 270 mA

LCD option: STN, TN, FSTN


Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.

You might also like