1 Cement 4700.

00 Municipal Area Allowance 20%

2 HYSD Fe-415 Steel 32000.00 Overheads and Contractor's profit 13.615%
3 HYSD Fe-500 Steel 35000.00 Water Charges For Rural =Rs 73 & for 98
Municipal=Rs.98
4 Structural Steel Angles/ 34000.00
Channels/ Beams

5 Structural Steel Flats 34000.00

6 Structural Steel Plates 39000.00

7 Mild Steel Bars 33000.00

Lead Statement for the year 2018-19
Cement and steel rates based on G.O.Rt.No Dated : for the month of 2018

Conv
Conveyance Loading Unloading MA on
Lead in y
Sl MATERIAL DESCRIPTION Avg Thk Class Size Material Code per Unit Source KM Grou Basic Cost (Category B) (Category C) (Category C) Loading & Final Cost
p Less 13.615% Less 13.615% Less 13.615% Unloading

20%
1 Cement 43 Grade CSSR-A.05 1 MT LOCAL 0 C 4700.00 0.00 0.00 0.00 0.00 4700.00
2 HYSD Fe-500 Steel 500 CSSR-A.62 1 MT LOCAL 0 C 35000.00 0.00 0.00 0.00 0.00 35000.00
3 Structural Steel Angles/ CSSR-A.68 1 MT LOCAL 0 C 34000.00 0.00 0.00 0.00 0.00 34000.00
Channels/ Beams
4 Structural Steel Flats CSSR-A.69 1 MT LOCAL 0 C 34000.00 0.00 0.00 0.00 0.00 34000.00
5 Structural Steel plates CSSR-A.69 1 MT LOCAL 0 C 39000.00 0.00 0.00 0.00 0.00 39000.00
6 Mild Steel Bars 1 MT LOCAL 0 C 33000.00 0.00 0.00 0.00 0.00 33000.00
7 Fine aggregate/Sand for filling CSSR-A.27 1 cum 0 245 A 570.00 2551.86 0.00 10.56 2.11 3134.53
8 Fine aggregate /Sand for CSSR-A.28 1 cum 0 245 A 760.00 2551.86 0.00 10.56 2.11 3324.53
mortar/ plastering works
9 Fine aggregate/Sand for CSSR-A.27 1 cum 0 245 A 570.00 2551.86 0.00 10.56 2.11 3134.53
concrete works
10 Gravel for Filling M-090 1 cum 0 10 A 98.00 112.05 0.00 10.56 2.11 222.72
11 Murrum CSSR-56 1 cum 0 10 A 225.00 112.05 0.00 10.56 2.11 349.72
11 6mm Nominal Aggregate M-050 1 cum 0 20 B 698.25 235.36 0.00 21.08 4.22 958.91
12 10mm Nominal Aggregate M-051 1 cum 0 20 B 888.25 235.36 0.00 21.08 4.22 1148.91
13 12 mm Nominal Aggregate M-052 1 cum 0 20 B 1043.25 235.36 0.00 21.08 4.22 1303.91
14 20mm Nominal Aggregate M-053 1 cum 0 20 B 1154.50 235.36 0.00 21.08 4.22 1415.16
15 40mm Nominal Aggregate M-055 1 cum 0 20 B 698.25 235.36 0.00 21.08 4.22 958.91
16 Random Rubble Stone Rate per M-148 1 cum 0 20 B 306.00 235.36 0.00 0.00 0.00 541.36
( including loading and un- each
loading)

1 of 171
17 Coursed Rubble Stone - Each 24.00 30x30x45 cm CSSR-A.13 1 cum 0 20 B 592.59 235.36 0.00 21.08 4.22 853.25

18 Coursed Rubble Stone - Each 30.00 30x30x60 cm CSSR-A.14 1 cum 0 20 B 555.56 235.36 0.00 21.08 4.22 816.22

19 Rough Stone - Each 35.00 20x20x75 cm CSSR-A.64 1 cum 0 20 B 1166.67 235.36 0.00 21.08 4.22 1427.33
20 Through stones - Each 26.00 20x20x30-45 CSSR-A.75 1 cum 0 20 B 1733.33 235.36 0.00 21.08 4.22 1993.99
cm
21 Through stones - Each 45.00 25x25x45-60 CSSR-A.76 1 cum 0 20 B 1371.43 235.36 0.00 21.08 4.22 1632.09
cm
22 Through stones - Each 1032 65.00 30x30x65-75 CSSR-A.77 1 cum 0 20 B 1031.75 235.36 0.00 21.08 4.22 1292.41
cm
23 Un-coursed Rubble Stone CSSR-A.79 1 cum 0 20 B 350.00 235.36 0.00 21.08 4.22 610.66
24 Bricks 2nd Class : Non-modular 23x11x7 cm TBSC-A.I-01 1000 Nos 0 20 F 5700.00 377.94 0.00 58.00 11.60 6147.54

25 Bricks 2nd Class : Modular 19x9x9 cm TBSC-A.I-02 1000 Nos 0 0 F 6700.00 0.00 0.00 58.00 11.60 6769.60
26 Fly-Ash Lime Solid Blocks Class 7.5 290x225x140 TBSC-A.II-01 1000 Nos 0 20 F 25000.00 1949.47 0.00 299.17 59.83 27308.47
mm
27 Fly-Ash Lime Solid Blocks Class 7.5 225x100x60 TBSC-A.II-05 1000 Nos 0 20 F 8000.00 288.10 0.00 44.21 8.84 8341.15
mm
24 Fly-Ash Lime Solid Blocks Class 5 290x225x140 TBSC-A.II-08 1000 Nos 0 20 F 24000.00 1949.47 0.00 299.17 59.83 26308.47
mm
25 Fly-Ash Lime Solid Blocks Class 5 225x100x60 TBSC-A.II-12 1000 Nos 0 20 F 6000.00 288.10 0.00 44.21 8.84 6341.15
mm
25 Fly-Ash Lime Solid Blocks Class 5 290x100x140 TBSC-A.II-11 1000 Nos 0 20 F 11000.00 866.43 0.00 132.96 26.59 12025.98
mm
26 Kadapa Slab 40 0.457x0.457 TBSC-B.I-04 1 sqm 0 0 D 95.00 0.00 0.00 0.84 0.17 96.01
M
27 Kadapa Slab 50 0.457x0.457 TBSC-B.I-05 1 sqm 0 0 D 110.00 0.00 0.00 1.05 0.21 111.26
M
28 Shahabad / Tandur Rough Stone 25 TBSC-B.I-01 1 sqm 0 0 D 95.00 0.00 0.00 0.53 0.11 95.64

29 Shahabad / Tandur Rough Stone 32.5 TBSC-B.I-02 1 sqm 0 0 D 123.00 0.00 0.00 0.69 0.14 123.83
(25-40mm)
30 Polished Shahabad / Tandur 16.5 TBSC-B.I-03 1 sqm 0 0 D 164.00 0.00 0.00 0.35 0.07 164.42
Stone (15-18mm)
31 Ploished Black Kadapa Slab(15- 16.5 TBSC-B.I-06 1 sqm 0 0 D 137.00 0.00 0.00 0.35 0.07 137.42
18mm)
26 High Polished Granite other 17 up to 2.43 M TBSC-B.III-01 1 sqm 0 0 D 3118.00 0.00 0.00 0.36 0.07 3118.43
than black premium colour
27 High Polished Granite other 17 up to 2.43 M TBSC-B.III-02 1 sqm 0 0 D 2709.00 0.00 0.00 0.36 0.07 2709.43
than black and regular colours
28 High Polished Granite Black 17 up to 2.43 M TBSC-B.III-03 1 sqm 0 0 D 2303.00 0.00 0.00 0.36 0.07 2303.43

29 Polsihed Marble 16 mm to 18 600mm to TBSC-B.II-01 1 sqm 0 0 D 661.00 0.00 0.00 0.38 0.08 661.46
20 mm of sizes from 600 mm to 900mm
900 mm
30 Polsihed Marble 16 mm to 18 upto 600mm TBSC-B.II-02 1 sqm 0 0 D 534.00 0.00 0.00 0.38 0.08 534.46
20 mm of sizes up to 600 mm

2 of 171
31 Polsihed Marble 16 mm to 20 18 0.61 x any TBSC-B.II-03 1 sqm 0 0 D 907.00 0.00 0.00 0.38 0.08 907.46
mm (average) thick ( 0.610 M length
width of any
length)

3 of 171
239.000 with out blasting charges

4 of 171
 Excavation
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% Gravel for filling 222.72
Overheads and Contractor's 13.615% Sand for filling 3134.53
profit

INPUT FROM Current SoR INPUT FROM Current SoR

Light Mazdoor 445 Chlorpyriphos/ Lindane 207 deleted in
emulsifiable (TBSC-Q.VI-18) SSR 2019-20
(Machine)Shovel 0.50 cum 75 hp 1561 Asphalt Sprayer / 470
(CMC-051)
(crew) -do - 271.7 Water Charges For Rural Enter 98
=Rs 73 for Municipal=Rs.98
Air compressor 7 cmm (diesel) 1126.1 Operator Grouting/ Guniting/ 520
CMC-003 Shotcreting CMM-022
(crew) -do - 247.1 Blaster (Licensed) 590

Jack hammer CMC-039 20.8 Operator 520

Jackhammer/Pneumatic tamper
(crew) -do - 386.1

Drilling holes in hard rock 275

surfaces up to 18mm Diameter
(TBSC-R.I-46)

Drilling holes in hard rock above 383

18mm Diameter (TBSC-R.I-47)

Detonator electric (CSSR-A.21) 10

Gelatin 80% (As per SSR 2015- 73

16)
As per market rate

Stone Masonry
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% CR STONE(30X30X60) 816.22
profit
Rough Stone (20x20x75cm) 1427.33
INPUT FROM Current SoR
Light Mazdoor 445 Through Stones (25x25x45-60 1632.09
CMM-087 cm)
Mason Cl- II / Brick layer Cl- II 470 Randum Rubble stone 541.36
CMM-035
Mason Cl- I / Brick layer Cl- I 500 Sand for Mortar 3324.53
CMM-011
 Reinforcement / Steel
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% HYSD Fe415 32000.00
Overheads and Contractor's 13.615% MILD STEEL 33000.00
INPUT FROMprofit
Current SoR STRUCTURAL STEEL 34000.00
Binding wire 55.00 FLATS 34000.00
Black smith (CMM-002) 495.00 HYSD Fe500 35000.00
Light mazdoor (CMM-087) 445.00
Mild Steel Tubes & pipes (TBSC- 61.00
E.I-15)

TBSC-T.I-16 Labour charges for fabricating steel works like Window Grills, 1kg 30
Compound Wall Grills, Iron Doors, Windows including cost of
welding rods, power charges, excluding cost of fixing in position.

TBSC-T.I-17 Labour charges for fixing Iron Doors, Iron Windows and Window 1kg 4
Grills in position.
TBSC-T.I-18 Labour charges for fabricating all structural steel works like 1kg 27
heavy steel works like Trusses, Stanchions, Heavy Beams and
Girders including cost of welding rods, power charges, etc
excluding cost of fixing in position.

TBSC-T.I-19 Labour charges for erecting & fixing all structural steel works like 1kg 24
heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders
erecting in position and fixing by using chain pulley blocks,
Derek pole arrangements and cranes etc., complete in position

Brick Masonry
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615%
profit fly-ash blocks of size 290 x 225 x
140 mm (Class 5)
26308.47
INPUT FROM MORTAR
Sand for mortar 3324.53
fly-ash blocks of size 290 x 100 x
140 mm (Class 5) 12025.98

INPUT FROM Current SoR

Light Mazdoor 445 Mason Cl- I / Brick layer Cl- 500
CMM-087 I(CMM-011)

Mason Cl- II / Brick layer Cl- II 470

CMM-035

Scaffolding from SoR Material 10.32

Floor 1st 2nd 3rd 4th 5th 6th 7th 8th
 Labour 83.43 119.47 155.49 191.53 227.56 263.58 299.60 335.63

Plastering
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% Sand for plastering 3324.53
profit 12mm graded metal 1203.91
Sand for Concrete 3134.53
6mm Nominal aggregate 958.91

INPUT FROM Current SoR INPUT FROM Current SoR

Light Mazdoor 445 Mason Cl- I / Brick layer Cl- 500
CMM-087 I(CMM-011)

Mason Cl- II / Brick layer Cl- II 470 Water Proofing compound 95

CMM-035

Concrete mixer 300 / 200 152.5 Rabbit wire mesh 19

( diesel) CMC-16 TBSC-E.I-12

CREW -do- 260 cinder aggregates 808

TBSC-R.I-02

Wooden scaffolding
Material Labour / floor -- 1st 2nd 3rd 4th 5th 6th 7th 8th
2.46 Ceiling 16.71 23.70 30.69 37.70 44.69 51.68 58.68 65.68
1.03 12/20 mm 8.35 11.95 15.54 19.15 22.75 26.37 29.97 33.56
plastering

Stone Flooring
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% Sand for mortar 3324.53
profit Sand for concrete 3134.53
6-12mm graded aggregate 1203.91
INPUT FROM Current SoR
Light Mazdoor 445 Granite 16 to 18 mm premium 3118.43
CMM-087 colours (TBSC-B.III-01)
Mason Cl- II / Brick layer Cl- II 470 Machine cutting charges (TBSC- 19
CMM-035 T.I-13)

Mason Cl- I / Brick layer Cl- 500 Granite 16 to 18 mm other than 2709.43
I(CMM-011) black and regular colours (TBSC-
B.III-02)

White Cement 29 Granite 16 to 18 mm black 2303.43

TBSC-R.I-01 colour (TBSC-B.III-03)
Flat Nosing (TBSC-T.I-14) 58
TBSC-T.I-14
 Half Rounding the edges 370.00
TBSC-T.I-11

Polished Shahabad (0.457x0.304) 164.42 Rounding the edges 480.00

TBSC-T.I-12

TBSC-B.III- Granite stone tiles 8 mm thick (mirror polished of all shades) 1sqm 1057
04
TBSC-C.VIII- Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 1sqm 258
02 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of
any shades.
TBSC-C.VII- Supplying precast terrazzo plain tiles conforming to IS: 13801 using marble 1sqm 278
02 aggregates of size 10 mm , sand, marble powder, white cement pigments etc.,
with terrazzo topping not less than 6 mm of tiles overall size not less than 20 mm
thick any coloured shades.

Tiles Flooring
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% Sand for mortar 3324.53
profit

INPUT FROM Current SoR

Light Mazdoor 445
CMM-087
Mason Cl- II / Brick layer Cl- II 470
CMM-035

Mason Cl- I / Brick layer Cl- 500

I(CMM-011)

White Cement 29
TBSC-R.I-01

TBSC-C.I- Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm 1sqm 300
01 and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

TBSC-C.III- Supply of glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 1sqm 300
01 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

TBSC-C.IV- Supply of digital / polished glazed full body porcelain wall tiles of size 300 x 600 1sqm 500
02 mm with any type of design texture such as marble finish, wooden, bamboo, stone
finishes etc., scratch less, stain free and thickness between 6-8 mm 1st
quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs
TBSC-C.IV- Supply of digital / polished glazed full body porcelain highlighter wall tiles of size 1sqm 500
03 300 x 600 mm with any type of design texture such as marble finish, wooden,
bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm
1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs

TBSC-C.II- Supply of Nano polished /stain free soluble salt porcelain vitrified tiles screen 1sqm 421
03 printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish
in all shades and designs

TBSC-C.II- Supply of Double charged / multi charged stain free full body porcelain vitrified 1sqm 550.00
05 tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any
colour and finish in all shades and designs

TBSC-C.II- Supply of digital / polished glazed full body porcelain vitrified tiles with any type of 1sqm 800.00
09 design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch
less, stain free and of size 900 x 900 mm and thickness between 9-11 mm 1st
quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs

PAINT
INPUT INPUT FROM SoR
Municipal Area Allowance 20% TBSC-G.I- Primer Grade-I 150.00
01 Interior
Overheads and Contractor's 13.615% TBSC-G.I- Primer Grade-II 191.00
profit 02 Exterior
TBSC-G.I- Red Oxide Primer 129.00
05 Grade-I
INPUT FROM Current SOR
Painter I (CMM-035) 570.00 TBSC-G.I- Wood Primer 144.00
07
Painter II (CMM-079) 470.00 TBSC-G.I- Putty wood work 144.00
09
Mazdoor 445.00 TBSC-G.II- OBD 54.00
03
TBSC- Acrylic emulsion 195.00
G.III-01 Interior
TBSC-G.V- Enamel paint grade-I 251.00 TBSC- Acrylic exterior 204.00
01 G.III-02 emulsion
TBSC-G.V- Enamel paint grade-II 191.00 TBSC-G.II- Water proof cement 51.00
02 04

TBSC-G.I- Wall putty of white 35.00 /1kg TBSC-G.II- white lime for wash 22.00
03 cement or polymer 01
or cement based

TBSC- Exterior grade 37.00 /1kg TBSC- Melamine polish 317.00

G.VI-01 Texture ready mixed G.VII-01
paint with sand
texture added sand
particles Acrylic
copolymers and
mineral compounds,
bactericides and
various additives.
 TBSC-G.I- thinner 133.00
14
Scaffolding from SoR Material 1.03 For Texture
Floor 1st 2nd 3rd 4th 5th 6th 7th 8th
Labour 8.35 11.95 15.54 19.15 22.75 26.37 29.97 33.56

CONCRETE WORKS
INPUT FROM Current SoR
Concrete mixer 300 / 200 152.5
( diesel)
CREWCMC-16
-do- 260
Batching plant 0.5 cum 241.4
CMC-009
CREW -do- 389.3
Needle vibrator 40 mm ( petrol ) 26.5
CMC-040
CREW -do- 187.2

Centering from SoR

Footing Bed Block Pedestal Plinth beam
Material 288 Material 64 Material 328 Material 1390
Labour 663 Labour 341 Labour 1054 Labour 1597
Wooden centering & scaffold
Material Labour / floor -- 1st 2nd 3rd 4th 5th 6th 7th 8th
238 Column 1845 2029 2213 2398 2582 2768 2952 3135
790 Lintel 1314 1445 1575 1706 1838 1970 2101 2232
156 Chajja 202 222 243 263 282 303 323 343
1395 Beam 1547 1701 1856 2011 2165 2321 2475 2629
158 Up to 175 193 211 228 246 264 280 298
150mm
slab
163 150 to 181 198 217 235 254 271 289 308
300mm
slab
170 Above 189 207 226 245 264 284 302 321
300mm
slab
 TBSC-R.I-
01

NON-PORCELAIN
CERAMIC FLOOR
TILES

CERAMIC WALL TILES

PORCELAIN WALL
TILES
PORCELAIN WALL
TILES

PORCELAIN
VITRIFIED FLOOR
TILES

PORCELAIN
VITRIFIED FLOOR
TILES

PORCELAIN
VITRIFIED FLOOR
TILES
Name of Work:
CIVIL DATAS
Buildings SoR : 2019-20
S.No Amount
Index Code Description Quantity Rate (RS) Unit (RS)
Earthwork Excavation
1 BLD-CSTN- Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m
2.1 including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and
overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B
(APSS 308) in Ordinary Soil-Mannual Means.

UNIT 10 CUM
Man power Light mazdoor 3.64 day 445.00 1 day 1619.80
Add 75% for excavation of building 75% 1619.80 1214.85
foundation

Applicable 20% 2834.65 566.93

Muncipal Area
Allowance
Sub-total 3401.58
Rate per 1 cum. Say 340.16
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 340.16 340.16 340.16 340.16
out above

Add 10% for 0 34.02 68.04 102.06

every 1M
depth above
3M

Applicable 46.31 50.94 55.58 60.21

Overheads and
Contractor's
profit

Rate per 1 386.47 425.12 463.78 502.43

cum.

Say 386.00 425.00 464.00 502.00

2 BLD-CSTN- Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m
2.2 including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and
overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B
(APSS 308) in Ordinary Soil-Mechanical Means.

UNIT 240 CUM

Machinery CMC-051 Shovel 0.50 6 Hour 1561.00 1 Hour 9366.00
cum 75 hp

Crew CMC-052 Shovel 0.50 6 Hour 271.70 1 Hour 1630.20

cum 75 hp

Municipal Area 20% 1630.20 326.04

Allowance
applicable on
Machinery
crew

Man power CMM-087 Light mazdoor 8.32 day 445.00 1 day 3702.40

14 of 171
 Municipal Area 20% 3702.40 740.48
Allowance
applicable on
Machinery
crew
Add 75% for excavation of building 75% 9366.00 7024.50
foundation (Machinery)

Add 75% for excavation of building 75% 5332.60 3999.45

foundation (Labour component)
Crew+ Light Mazdoor
Applicable 20% 3999.45 799.89
Municipal Area
Allowance

Sub-total 27588.96
Basic Rate per 1 cum. Say 114.95
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 114.95 114.95 114.95 114.95
out above

Add 10% for 0 11.50 23.00 34.50

every 1M
depth above
Applicable
3M 15.65 17.22 18.78 20.35
Overheads and
Contractor's
profit

Rate per 1 Cum 130.60 143.67 156.73 169.80

Say 131.00 144.00 157.00 170.00

3 BLD-CSTN- Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial
2.1 lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc.
and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B
(APSS 308) in Ordinary Soil-Mannual Means.

UNIT 10 CUM
Man power CMM-087 Light mazdoor 3.64 day 445.00 1 day 1619.80
Applicable 20% 1619.80 323.96
Municipal Area
Allowance
Sub-total 1943.76
Rate per 1 cum. Say 194.38
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 194.38 194.38 194.38 194.38
out above

Add 10% for 0 19.44 38.88 58.32

every 1M
depth above
3M

Applicable 26.46 29.11 31.76 34.41

Overheads and
Contractor's
profit

15 of 171
 Rate per 1 220.84 242.93 265.02 287.11
cum.

Say 221.00 243.00 265.00 287.00

4 BLD-CSTN- Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial
2.2 lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc.
and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS
20B (APSS 308) in Ordinary Soil-Mechanical Means

UNIT 240 CUM

Machinery CMC-051 Shovel 0.50 6 Hour 1561.00 1 Hour 9366.00
cum 75 hp
Crew CMC-052 Shovel 0.50 6 Hour 271.70 1 Hour 1630.20
cum 75 hp
Municipal Area 20% 1630.20 326.04
Allowance
applicable on
Machinery
crew

Man power CMM-087 Light mazdoor 8.32 day 445.00 1 day 3702.40
Applicable 20% 3702.40 740.48
Municipal Area
Allowance

Total 15765.12
Basic Rate per 1 cum. Say 65.69
6 to 7M Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
65.69 Rate as worked 65.69 65.69 65.69 65.69
out above

26.28 Add 10% for 0 6.57 13.14 19.71

every 1M
depth above
3M

12.52 Applicable 8.94 9.84 10.73 11.63

Overheads and
Contractor's
profit
104.49 Rate per 1 Cum 74.63 82.10 89.56 97.03

Say
104.00 75.00 82.00 90.00 97.00
5 Drilling holes in hard rock surfaces upto 18mm Diameter, including all operational, incidental, labour charges, and
TBSC-R.I- overheads & contractor's profit, complete for finished item of work.
46
UNIT 1 Rm
TBSC-R.I- 1 Rm 275 1 Rm 275
46
Drilling holes in
hard rock
surfaces up to
18mm
Diameter

16 of 171
 (Taking Applicable 20% 110 22
40% of Municipal Area
over all Allowance
rate labour
componen
t)

Applicable 13.615% 297 40.44

Overheads and
Contractor's
profit

Rate per 1 Rm 337.44

Say 337
6 Drilling holes in hard rock above 18mm Diameter, including all operational, incidental, labour charges, and
TBSC-R.I- overheads & contractor's profit, complete for finished item of work.
47
UNIT 1 Rm
TBSC-R.I- 1 Rm 383 1 Rm 383
47
Drilling holes in
hard rock
above 18mm
Diameter
(Taking Applicable 20% 153.2 30.64
40% of Municipal Area
over all Allowance
rate labour
componen
t)

Applicable 13.615% 413.64 56.32

Overheads and
Contractor's
profit

Rate per 1 Rm 469.96

Say 470

7 BLD-CSTN- Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring blasting ) and
2.4 depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished
item of work excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 10 CUM
Man power CMM-087 Light mazdoor 5.2 day 445.00 1 day 2314.00

Add 75% for excavation of building 50% 2314.00 1157.00

foundation excluding blasting
component which is 2/3rd of the rate
component

Applicable 20% 3471.00 694.20

Municipal Area
Allowance

Sub-total 4165.20
Rate per 1 cum. Say 416.52
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths

17 of 171
 Rate as worked 416.52 416.52 416.52 416.52
out above

Add 10% for 0 41.65 83.30 124.95

every 1M
depth above
3M

Applicable 56.71 62.38 68.05 73.72

Overheads and
Contractor's
profit

Rate per 1 Cum 473.23 520.55 567.87 615.19

Say 473.00 521.00 568.00 615.00

8 BLD-CSTN- Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting)
2.5 and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 180 CUM

Machinery CMC-052 Shovel 0.50 6 Hour 1561.00 1 Hour 9366.00
cum 75 hp
Crew CMC-052 Shovel 0.50 6 Hour 271.70 1 Hour 1630.20
cum 75 hp
Municipal Area 20% 1630.20 326.04
Allowance
applicable on
Machinery
crew

Man power CMM-087 Light mazdoor 6.24 day 445.00 1 day 2776.80
Applicable 20% 2776.80 555.36
Municipal Area
Allowance

Add 75% for excavation of building 50% 9366.00 4683.00

foundation excluding blasting
component which is ⅓rd of the rate
component (Machinery)

Add 75% for excavation of building 50% 4407.00 2203.50

foundation excluding blasting
component which is ⅓rd of the rate
component {Crew+ Light Mazdoor}

Applicable 20% 2203.50 440.70

Municipal Area
Allowance

Sub-total 21981.60
Rate per 1 cum. Say 122.12
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 122.12 122.12 122.12 122.12
out above

Add 10% for 0 12.21 24.42 36.63

every 1M
depth above
3M

18 of 171
 Applicable 16.63 18.29 19.95 21.61
Overheads and
Contractor's
profit

Rate per 1 138.75 152.62 166.49 180.36

cum.
Say 139.00 153.00 166.00 180.00

Rate for 6 to 7M 8 to 9M 9 to10M 10 to 11M

different
depths
Rate as worked 122.12 122.12 122.12 122.12
out above

Add 10% for 48.84 61.05 73.26 85.47

every 1M
depth above
3M

Applicable 23.28 24.94 26.60 28.26

Overheads and
Contractor's
profit

Rate per 1 Cum 194.24 208.11 221.98 235.85

Say 194.00 208.00 222.00 236.00

9 BLD-CSTN- Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on bank for all
2.6 lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 10 CUM
Material CSSR-A.21 Detonator 14 Each 10.00 1 Each 140.00
electric

Material M-104 Gelatin 80% 3.5 Kg 73.00 1 Kg 255.50

Machinery CMC-003 Air compressor 1 Hour 1126.10 1 Hour 1126.10
7 cmm
( diesel )
Hire CMC-040 Jack hammer 2 Hour 20.80 1 Hour 41.60
Crew CMC-003 Air compressor 1 Hour 247.10 1 Hour 247.10
7 cmm
( diesel )

" CMC-040 Jack hammer 2 Hour 386.10 1 Hour 772.20

Man power CMM-003 Blaster 0.25 day 590.00 1 day 147.50
( Licensed )

Man power CMM-023 Operator 0.5 day 520.00 1 day 260.00

Jackhammer/P
neumatic
tamper

Man power CMM-087 Light mazdoor 8.35 day 445.00 1 day 3715.75
Add 75% for excavation of building 25% 1563.20 390.80
foundation excluding blasting
component which is ⅓rd of the rate
component

Add 75% for excavation of building 25% 5142.55 1285.64

foundation excluding blasting
component which is ⅓rd of the rate
component

19 of 171
 Applicable 20% 5408.89 1081.78
Municipal Area
Allowance

Municipal Area 20% 1019.30 203.86

Allowance
applicable on
Machinery
crew

Sub-total 9667.83
Rate per 1 cum. Say 966.78
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 966.78 966.78 966.78 966.78
out above

Add 10% for 0 96.68 193.36 290.04

every 1M
depth above
3M

Applicable 131.63 144.79 157.95 171.12

Overheads and
Contractor's
profit

Rate per 1 Cum 1098.41 1208.25 1318.09 1427.94

Say 1098.00 1208.00 1318.00 1428.00

10 BLD-CSTN- Earth work excavation for foundations (Open excavation) for buildings in hard rock (requiring blasting) and
2.6 depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 10 CUM
Material CSSR-A.22 Detonator 14 Each 10.00 1 Each 140.00
electric
Material M-104 Gelatin 80% 3.5 Kg 73.00 1 Kg 255.50
Machinery CMC-003 Air compressor 1 Hour 1126.10 1 Hour 1126.10
7 cmm
( diesel )

Hire CMC-040 Jack hammer 2 Hour 20.80 1 Hour 41.60

Crew CMC-003 Air compressor 1 Hour 247.10 1 Hour 247.10
7 cmm
( diesel )

" CMC-040 Jack hammer 2 Hour 386.10 1 Hour 772.20

Man power CMM-003 Blaster 0.25 day 590.00 1 day 147.50

( Licensed )
Man power CMM-023 Operator 0.5 day 520.00 1 day 260.00
Jackhammer/P
neumatic
tamper

Man power CMM-087 Light mazdoor 8.35 day 445.00 1 day 3715.75

Applicable 20% 4123.25 824.65

Municipal Area
Allowance

20 of 171
 Municipal Area 20% 1019.30 203.86
Allowance
applicable on
Machinery
crew

Sub-total 7734.26
Rate per 1 cum. Say 773.43
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 773.43 773.43 773.43 773.43
out above

Add 10% for 0 77.34 154.68 232.02

every 1M
depth above
3M

Applicable 105.30 115.83 126.36 136.89

Overheads and
Contractor's
profit

Rate per 1 878.73 966.60 1054.47 1142.34

cum.
Say 879.00 967.00 1054.00 1142.00

11 BLD-CSTN- Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on bank for all
2.7 lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 10 CUM
Machinery CMC-003 Air compressor 6 Hour 1126.10 1 Hour 6756.60
7 cmm
( diesel )

Hire CMC-040 Jack hammer 12 Hour 20.80 1 Hour 249.60

Crew CMC-003 Air compressor 6 Hour 247.10 1 Hour 1482.60
7 cmm
( diesel )

" CMC-040 Jack hammer 12 Hour 386.10 1 Hour 4633.20

Municipal Area 20% 6115.80 1223.16
Allowance
applicable on
Machinery
crew

Man power CMM-087 Light mazdoor 5.2 day 445.00 1 day 2314.00
Applicable 20% 2314.00 462.80
Municipal Area
Allowance

Add 75% for excavation of building 50% 7006.20 3503.10

foundation excluding blasting
component which is 2/3rd of the rate
component (machinery)

Add 75% for excavation of building 50% 8429.80 4214.90

foundation excluding blasting
component which is 2/3rd of the rate
component (Crew+ Mazdoor)

21 of 171
 Applicable 20% 4214.90 842.98
Municipal Area
Allowance

Sub-total 25682.94
Rate per 1 cum. Say 2568.29
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 2568.29 2568.29 2568.29 2568.29
out above

Add 10% for 0 256.83 513.66 770.49

every 1M
depth above
3M

Applicable 349.67 384.64 419.61 454.57

Overheads and
Contractor's
profit

Rate per 1 Cum 2917.96 3209.76 3501.56 3793.35

Say 2918.00 3210.00 3502.00 3793.00

12 BLD-CSTN- Earth work excavation (Sumps, Tanks and Open Excavation) (Manual Means) of buildings in ordinary rock ( not
2.4 requiring blasting ) and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)

UNIT 10 CUM
Man power CMM-087 Light mazdoor 5.2 day 445.00 1 day 2314.00

Applicable 20% 2314.00 462.80

Municipal Area
Allowance

Applicable 13.615% 2776.80 378.06

Overheads and
Contractor's
profit

Sub-total 3154.86
Rate per 1 cum. Say 315.00
13 BLD-CSTN- Earth work excavation (Sumps, Tanks and Open Excavation) (Mechanical Means) for buildings in ordinary rock (not
2.5 requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including
all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308).

UNIT 180 CUM

Machinery CMC-052 Shovel 0.50 6 Hour 1561.00 1 Hour 9366.00
cum 75 hp
Crew CMC-052 Shovel 0.50 6 Hour 271.70 1 Hour 1630.20
cum 75 hp
Municipal Area 20% 1630.20 326.04
Allowance
applicable on
Man power CMM-087 Light mazdoor
Machinery 6.24 day 445.00 1 day 2776.80
Applicable
crew 20% 2776.80 555.36
Municipal Area
Allowance

22 of 171
 Sub-total 14654.40
Rate per 1 cum. Say 81.41
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 81.41 81.41 81.41 81.41
out above

Add 10% for 0 8.14 16.28 24.42

every 1M
depth above
3M

Applicable 11.08 12.19 13.30 14.41

Overheads and
Contractor's
profit

Rate per 1 Cum 92.49 101.74 110.99 120.24

Say 92.00 102.00 111.00 120.00

14 BLD-CSTN- Earth work excavation (Sumps, Tanks and Open Excavation) for buildings in hard rock (blasting prohibited) and
2.7 depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308)

UNIT 10 CUM

Machinery CMC-003 Air compressor 6 Hour 1126.10 1 Hour 6756.60

7 cmm
( diesel )
Hire CMC-040 Jack hammer 12 Hour 20.80 1 Hour 249.60

Crew CMC-003 Air compressor 6 Hour 247.10 1 Hour 1482.60

7 cmm
( diesel )
" CMC-040 Jack hammer 12 Hour 386.10 1 Hour 4633.20
Municipal Area 20% 6115.80 1223.16
Allowance
applicable on
Machinery
crew

Man power CMM-087 Light mazdoor 5.2 day 445.00 1 day 2314.00

Applicable 20% 2314.00 462.80

Municipal Area
Allowance

Sub-total 17121.96
Rate per 1 cum. Say 1712.20
Rate for Upto 3 M depth 3 to 4M 4 to 5M 5 to 6M
different
depths
Rate as worked 1712.20 1712.20 1712.20 1712.20
out above

Add 10% for 0 171.22 342.44 513.66

every 1M
depth above
3M

23 of 171
 Applicable 233.12 256.43 279.74 303.05
Overheads and
Contractor's
profit

Rate per 1 Cum 1945.32 2139.85 2334.38 2528.91

Say 1945.00 2140.00 2334.00 2529.00

15 BLD-CSTN Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with
-2-9 initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming
including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of
T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)

UNIT 6 CUM
Man power CMM-087 Light mazdoor 0.31 day 445 1 day 137.95

M-189 a Water charges 0.720 KL 98.00 1 KL 70.56

Applicable 20% 137.95 27.59

Municipal Area
Allowance

Applicable 13.615% 236.10 32.15

Overheads and
Contractor's
profit

Sub-total 268.25
Rate per 1 cum. Say 45.00

16 BLD-CSTN- Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding
2.8 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental,
labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS
NO.309&310).

UNIT 6 CUM
Material BLC-009 Cost of Gravel 6 cum 222.72 1 cum 1336.32
Man power CMM-087 Light mazdoor 0.31 day 445 1 day 137.95

M-189 a Water charges 0.720 KL 98.00 1 KL 70.56

Applicable 20% 137.95 27.59

Municipal Area
Allowance

Applicable 13.615% 1572.42 214.08

Overheads and
Contractor's
profit

Sub-total 1786.50
Rate per 1 cum. Say 298.00

17 BLD-CSTN- Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not
2.8 exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all
peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for
fnished item of work(APSS NO.309&310).

UNIT 6 CUM
Material BLC-007 Cost of Sand 6 cum 3134.53 1 cum 18807.18
filling

Man power CMM-087 Light mazdoor 0.31 day 445.00 1 day 137.95

24 of 171
 M-189 a Water charges 0.100 KL 98.00 1 KL 9.80
Urban
Applicable 20% 137.95 27.59
Municipal Area
Allowance

Applicable 13.615% 18982.52 2584.47

Overheads and
Contractor's
profit

Sub-total 21566.99
Rate per 1 cum. Say 3594.00
18 BLD-CSTN- Providing anti termite treatment as per IS 6315 (Part-2) 2001 (pre-constructional chemical treatment measures)
16-1 along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the
basement filling below flooring bed as per the specified procedure confirming to IS 6315 (Part-2) 2001 and other
relevent approved specification duly using Chlorpyriphos / Lindane emulsifiable concentrate 20% with 1%
concentration @ 7.5 Liters/sqm of the vertical surface & 5.0 Liters/sqm of the horizontal surface of the substructure
to a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area
including excavation channel along the wall & rodding etc & cost & conveyane of all materials to the site, cost of
labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge.
( The rate includes overheads & contractors profit )

UNIT 10 Sqm
Material TBSC-Q.VI- Chlorpyriphos/ 4.51 Ltr 207.00 1 Ltr 933.57
18 Lindane
emulsifiable
concentrate of
20%

Man power CMM-043 Asphalt 0.22 day 470.00 1 day 103.40

Sprayer / Boiler
attendant

CMM-087 Light mazdoor 3 day 445.00 1 day 1335.00

Applicable 20% 1438.40 287.68
Municipal Area
Allowance

Add: water 1% 2659.65 26.60

charges
Add: Sprayer, drilling 10% 2659.65 265.97
machine
Add: Water & Electricity 1.50% 2659.65 39.89
Add: Sundries & contigents 3.00% 2659.65 79.79
Applicable 13.615% 3071.90 418.24
Overheads and
Contractor's
profit

Sub-total 3490.14
Rate per 1 Sqm. Say 349.00

Stone Masonry
19 BLD-CSTN- Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard Granite stones carted from
6.12 approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to
site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of
overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601
& 615).

UNIT 1 CUM
Material BLC-001 Cement 79.2 Kg 4700.00 1000 Kg 372.24

25 of 171
 BLC-016 Cost of CR 0.44 cum 816.22 1 cum 359.14
Stone
(30x30x60cm)
BLC-018 Cost of 0.5 cum 541.36 1 cum 270.68
Randum
Rubble Stone
BLC-020 Cost of 0.16 cum 1632.09 1 cum 261.13
Through Stones
(25x25x45-60
cm)

BLC-008 Cost of Sand 0.33 cum 3324.53 1 cum 1097.09

Man power CMM-011 Mason Cl- I / 1.2 day 500.00 1 day 600.00
Brick layer Cl- I

CMM-087 Light mazdoor 2 day 445.00 1 day 890.00

Applicable 20% 1490.00 298.00
Municipal Area
Allowance

Add: Water 1% 4148.28 41.48

charges
Applicable 13.615% 4189.76 570.44
Overheads and
Contractor's
profit

Sub-total 4760.20
Rate per 1 cum. Say 4760.00
20 BLD-CSTN- Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from
6.13 approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to
site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of
overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601
& 615).

UNIT 1 CUM
Material BLC-001 Cement 59.4 Kg 4700.00 1000 Kg 279.18
BLC-016 Cost of CR 0.44 cum 816.22 1 cum 359.14
Stone
(30x30x60cm)
BLC-018 Cost of 0.5 cum 541.36 1 cum 270.68
Randum
Rubble Stone
BLC-020 Cost of 0.16 cum 1632.09 1 cum 261.13
Through Stones
(25x25x45-60
cm)

BLC-008 Cost of Sand 0.33 cum 3324.53 1 cum 1097.09

Man power CMM-011 Mason Cl- I / 1.2 day 500.00 1 day 600.00
Brick layer Cl- I

CMM-087 Light mazdoor 2 day 445.00 1 day 890.00

Applicable 20% 1490.00 298.00
Municipal Area
Allowance

Add: Water 1% 4055.22 40.55

charges

26 of 171
 Applicable 13.615% 4095.77 557.64
Overheads and
Contractor's
profit

Sub-total 4653.41
Rate per 1 cum. Say 4653.00

21 BLD-CSTN- CR stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using hard granite stones from approved quarry
6.6 including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry
to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction,
scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in
foundation & basement. (APSS No. 615 & 601)

UNIT 1 CUM
Material BLC-001 Cement 76.8 Kg 4700.00 1000 Kg 360.96
BLC-018 Cost of CR 0.94 cum 816.22 1 cum 767.25
Stone
(30x30x60cm)
BLC-020 Cost of 0.16 cum 1632.09 1 cum 261.13
Through Stones
(25x25x45-60
cm)

BLC-008 Cost of Sand 0.32 cum 3324.53 1 cum 1063.85

Man power CMM-011 Mason Cl- I / 1.5 day 500.00 1 day 750.00
Brick layer Cl- I

CMM-087 Light mazdoor 2.32 day 445.00 1 day 1032.40

Applicable 20% 1782.40 356.48
Municipal Area
Allowance

Add: Water 1% 4592.07 45.92

charges
Applicable 13.615% 4637.99 631.46
Overheads and
Contractor's
profit

Sub-total 5269.45
Rate per 1 cum. Say 5269.00

22 BLD-CSTN- Flush Pointing to RR/ CRS Masonry in CM (1:3) including cost and conveyance of all materials in site, curing, labour
7.2 charges etc, and overheads & contractors profit, complete for finished item of work.

UNIT 10 SQM
Material BLC-001 Cement 14.4 Kg 4700.00 1000 Kg 67.68
BLC-008 Cost of Sand 0.03 cum 3324.53 1 cum 99.74
Man power CMM-077 Mason Cl- ll / 0.5 day 470.00 1 day 235.00
Brick layer Cl-II

CMM-087 Light mazdoor 0.74 day 445.00 1 day 329.30

Applicable 20% 564.30 112.86
Municipal Area
Allowance

Add: Water 1% 844.58 8.45

charges
Applicable 13.615% 853.03 116.14
Overheads and
Contractor's
profit

27 of 171
 Sub-total 969.17
Rate per 1 Sqm. Say 97.00

23 BLD-CSTN- Raised Pointing to RR/ CRS Masonry in CM (1:3) including cost and conveyance of all materials in site, curing, labour
7.3 charges etc, overheads & contractors profit, complete for finished item of work.

UNIT 10 SQM
Material BLC-001 Cement 28.8 Kg 4700.00 1000 Kg 135.36
BLC-008 Cost of Sand 0.06 cum 3324.53 1 cum 199.47
Man power CMM-077 Mason Cl- ll / 0.5 day 470.00 1 day 235.00
Brick layer Cl-II

CMM-087 Light mazdoor 0.74 day 445.00 1 day 329.30

Applicable 20% 564.30 112.86
Municipal Area
Allowance

Add: Water 1% 1011.99 10.12

charges
Applicable 13.615% 1022.11 139.16
Overheads and
Contractor's
profit

Sub-total 1161.27
Rate per 1 Sqm. Say 116.00

Reinforcement / Steel
24 BLD-CSTN- Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe415 grade as per IS 1786-1979 manufactured
4-1 by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters
for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in
position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills
for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site,
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying
on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS
No.126)

UNIT 1 MT
Material BLC-002 Cost of HYSD 1.05 MT 32000.00 1 MT 33600.00
Fe-415 Steel
(including
loading
charges)

TBSE- Binding wire 6 Kg 55.00 1 Kg 330.00

8.1.13
Man power CMM-002 Black smith / 10 day 495.00 1 day 4950.00
Tin smith /
Rivetor
CMM-087 Light mazdoor 10 day 445.00 1 day 4450.00
Applicable 20% 9400.00 1880.00
Municipal Area
Allowance

Sub-total 45210.00
Rate per 1 MT Say 45210.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 45210.00 45210.00 45210.00 45210.00
out above

Lift charges 0.00 940.00 1880.00 2820.00

28 of 171
 Applicable 0.00 188.00 376.00 564.00
Municipal Area
Allowance

Applicable 6155.34 6308.92 6462.50 6616.07

Overheads and
Contractor's
profit

Rate per MT 51365.34 52646.92 53928.50 55210.07

Say 51365.00 52647.00 53929.00 55210.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 45210.00 45210.00 45210.00 45210.00
out above

Lift charges 3760.00 4700.00 5640.00 6580.00

Applicable 752.00 940.00 1128.00 1316.00
Municipal Area
Allowance

Applicable 6769.65 6923.23 7076.80 7230.38

Overheads and
Contractor's
profit

Rate per MT 56491.65 57773.23 59054.80 60336.38

Say 56492.00 57773.00 59055.00 60336.00

25 BLD-CSTN- Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979
4-1 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of
different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and
shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding
wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of
steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending,
placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished
item of work ( APSS No.126)

UNIT 1 MT
Material BLC-002 Cost of HYSD 1.05 MT 35000.00 1 MT 36750.00
(Fe
500/500D/550
D grade
(including
loading
charges)

TBSE- Binding wire 6 Kg 55.00 1 Kg 330.00

8.1.13
Man power CMM-002 Black smith / 10 day 495.00 1 day 4950.00
Tin smith /
Rivetor
CMM-087 Light mazdoor 10 day 445.00 1 day 4450.00
Applicable 20% 9400.00 1880.00
Municipal Area
Allowance

Sub-total 48360.00
Rate per 1 MT Say 48360.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors

29 of 171
 Rate as worked 48360.00 48360.00 48360.00 48360.00
out above

Lift charges 0.00 940.00 1880.00 2820.00

Applicable 0.00 188.00 376.00 564.00
Municipal Area
Allowance

Applicable 6584.21 6737.79 6891.37 7044.95

Overheads and
Contractor's
profit

Rate per MT 54944.21 56225.79 57507.37 58788.95

Say 54944.00 56226.00 57507.00 58789.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 48360.00 48360.00 48360.00 48360.00
out above

Lift charges 3760.00 4700.00 5640.00 6580.00

Applicable 752.00 940.00 1128.00 1316.00
Municipal Area
Allowance

Applicable 7198.52 7352.10 7505.68 7659.25

Overheads and
Contractor's
profit

Rate per MT 60070.52 61352.10 62633.68 63915.25

Say 60071.00 61352.00 62634.00 63915.00
26 Providing Mild steel (MS) steel bars ( (Fe 250 grade as per IS 432) of different diameters including labour charges for
straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved
materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per
approved designs and drawings, including cost and conveyance of steel bars to bars, including all wastages such as
overlaps, couplings, chairs, spacer bars, including cost and conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials and cost
of overheads & contractors profit etc., complete for finished item of work in all floors.( APSS No.126)

UNIT 1 MT
Material BLC-006 Cost of MS bars 1.05 MT 33000.00 1 MT 34650.00
Fe 250 grade
(including
loading
charges)

TBSE- Binding wire 6 Kg 55.00 1 Kg 330.00

8.1.13
Man power CMM-002 Black smith / 10 day 495.00 1 day 4950.00
Tin smith /
Rivetor
CMM-087 Light mazdoor 10 day 445.00 1 day 4450.00
Applicable 20% 9400.00 1880.00
Municipal Area
Allowance

Sub-total 46260.00
Rate per 1 MT Say 46260.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors

30 of 171
 Rate as worked 46260.00 46260.00 46260.00 46260.00
out above

Lift charges 0.00 940.00 1880.00 2820.00

Applicable 0.00 188.00 376.00 564.00
Municipal Area
Allowance

Applicable 6298.30 6451.88 6605.45 6759.03

Overheads and
Contractor's
profit

Rate per MT 52558.30 53839.88 55121.45 56403.03

Say 52558.00 53840.00 55121.00 56403.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 46260.00 46260.00 46260.00 46260.00
out above

Lift charges 3760.00 4700.00 5640.00 6580.00

Applicable 752.00 940.00 1128.00 1316.00
Municipal Area
Allowance

Applicable 6912.61 7066.19 7219.76 7373.34

Overheads and
Contractor's
profit

Rate per MT 57684.61 58966.19 60247.76 61529.34

Say 57685.00 58966.00 60248.00 61529.00

27 Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting, placing in
position, including cost and conveyance of all materials to work site and all operational, incidental, labour charges
including cost of overheads & contractors profit complete for finished item of work for purlins of AC sheet roofing.

UNIT 1 Kg
Material TBSC-E.I-15 Mild Steel 1.05 Kg 61.00 1 Kg 64.05
Tubes & pipes
of all diameters
as per IS-1161

Applicable 13.615% 64.05 8.72

Overheads and
Contractor's
profit

Sub-total 72.77
Rate per 1Kg Say 73.00

28 Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of
25mm X 6mm MS flat welded with 10mm X 10mm square bar rods placed at 4" and 2" c/c (alternate spacing) fixed
in both horizontal and vertical directions including cost and conveyance of all materials to work site, all operational,
incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.

UNIT 1.52x1.22 1.854 sqm

Material Mild Steel flats 25x6mm 5.48 RM @ 1.1775 Kg/RM 6.45
All round

wastage 5% 0.274

31 of 171
 Total 5.754 RM @ 1.1775 Kg/RM 6.78
Mild Steel 10mm Square kg
rods
Horizontal Member 21.28 RM @ 0.785 Kg/RM 16.71
7*2*1.52 =21.28 (as 2" & 4"
alternal C/C)

Vertical Member 21.96 RM @ 0.785 Kg/RM 17.24

9*2*1.22 =21.96 (as 2" & 4"
alternal C/C)

wastage 5% 2.162
Total 45.402 RM @ 0.785 Kg/RM 35.64
kg

Cost Cost of Flats 6.78 kg 34000.00 MT 1000 230.35

Cost of Mild Steel 35.64 kg 33000.00 MT 1000 1176.15
Man power TBSC-T.I-16 Labour charges 40.40 Kg 30 1 Kg 1211.91
for fabricating
steel works like
Window Grills,
Compound
Wall Grills, Iron
Doors,
Windows
including cost
of welding
rods, power
charges,
excluding cost
of fixing in
position

Man power TBSC-T.I-17 Labour charges 40.40 Kg 4 1 Kg 161.59

for fixing Iron
Doors, Iron
Windows and
Window Grills
in position

Applicable 20% 1373.50 274.70

Municipal Area
Allowance

Applicable 13.615% 3054.70 415.90

Overheads and
Contractor's
profit

Total 3470.60
Rate per 1sqm Say 1872.00

29 Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of
25mm X 6mm MS flat welded with 10mm square bars placed at 6" c/c fixed in both horizontal and vertical
directions including cost and conveyance of all materials to work site and all operational, incidental labour charges,
power charges, overheads & contractors profit etc., complete for finished item of work.

UNIT 1.52x1.22 1.854 sqm

32 of 171
 Material Mild Steel flats 25x6mm 5.48 RM @ 1.1775 Kg/RM 6.45
All round

wastage 5% 0.274
Total 5.754 RM @ 1.1775 Kg/RM 6.78
Mild Steel 10mm Square kg
rods
Horizontal Member 10.64 RM @ 0.785 Kg/RM 8.35
7*1*1.52 =10.64

Vertical Member 10.98 RM @ 0.785 Kg/RM 8.62

9*1*1.22 =10.98

wastage 5% 1.081
Total 22.701 RM @ 0.785 Kg/RM 17.82
kg

Cost Cost of Flats 6.78 kg 34000.00 MT 1000 230.35

Cost of Mil Steel 17.82 kg 33000.00 MT 1000 588.06
Man power TBSC-T.I-16 Labour charges 23.42 Kg 30 1 Kg 702.72
for fabricating
steel works like
Window Grills,
Compound
Wall Grills, Iron
Doors,
Windows
including cost
of welding
rods, power
charges,
Man power TBSC-T.I-17 Labour
excludingcharges
cost 23.42 Kg 4 1 Kg 93.70
for fixinginIron
of fixing
Doors,
positionIron
Windows and
Window Grills
in position

Applicable 20% 796.42 159.28

Municipal Area
Allowance

Applicable 13.615% 1774.11 241.55

Overheads and
Contractor's
profit

Total 2015.66
Rate per 1sqm Say 1087.00

Brick Masonry
30 BLD-CSTN- Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x
5-17 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and
conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc.,
complete for finished item of work. (APSS No. 501 & 504).

THICK 0.225 UNIT 1 cum

Material BMT-A.10 solid fly-ash 110 Nos 26308.47 1000 Nos 2893.93
blocks of size
290 x 225 x 140
mm

Material BLC-001 Cement 24 Kg 4700.00 1000 Kg 112.80

BLC-008 Cost of Sand 0.1 cum 3324.53 1 cum 332.45

33 of 171
Man power CMM-011 Mason Cl- I / 0.42 day 500.00 1 day 210.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 0.92 day 470.00 1 day 432.40

Brick layer Cl-II

CMM-087 Light mazdoor 2.8 day 445.00 1 day 1246.00

Applicable 20% 1888.40 377.68
Municipal Area
Allowance

Add: Water 1% 5605.26 56.05

charges
Sub-total 5661.31
Rate per 1 Sqm Say 5661.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5661.31 5661.31 5661.31 5661.31
out above

Scafolding 45.87 45.87 45.87 45.87

Charges
Scafolding 370.80 530.98 691.07 851.24
labour
Applicable 74.16 106.20 138.21 170.25
Municipal Area
Allowance
Lift charges 0.00 188.84 377.68 566.52

Applicable 0.00 37.77 75.54 113.30

Municipal Area
Allowance

Applicable 837.61 894.64 951.64 1008.67

Overheads and
Contractor's
profit

Rate per 1 cum 6989.75 7465.61 7941.32 8417.16

Say 6990.00 7466.00 7941.00 8417.00

Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5661.31 5661.31 5661.31 5661.31
out above

Scafolding 45.87 45.87 45.87 45.87

Charges
Scafolding 1011.38 1171.47 1331.56 1491.69
labour
Applicable 202.28 234.29 266.31 298.34
Municipal Area
Allowance

Lift charges 755.36 944.20 1133.04 1321.88

Applicable 151.07 188.84 226.61 264.38

Municipal Area
Allowance

Applicable 1065.68 1122.69 1179.70 1236.71

Overheads and
Contractor's
profit

34 of 171
 Rate per 1 cum 8892.95 9368.67 9844.40 10320.18

Say 8893.00 9369.00 9844.00 10320.00

31 BLD-CSTN- Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash
5-17 cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50
Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged
into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement,
steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement
mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit
etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)

UNIT 10 Sqm
Material BMT-A.13 solid fly-ash 247 Nos 12025.98 1000 Nos 2970.42
blocks of size
290 x 100 x 140
mm

Material BLC-001 Cement 24 Kg 4700.00 1000 Kg 112.80

BLC-008 Cost of Sand 0.1 cum 3324.53 1 cum 332.45
Man power CMM-011 Mason Cl- I / 0.42 day 500.00 1 day 210.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 0.92 day 470.00 1 day 432.40

Brick layer Cl-II

CMM-087 Light mazdoor 2.8 day 445.00 1 day 1246.00

Applicable 20% 1888.40 377.68
Municipal Area
Allowance

Add: Water 1% 5681.75 56.82

charges
Sub-total 5738.57
Rate per 1 Sqm Say 573.86
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 573.86 573.86 573.86 573.86
out above

Scafolding 10.32 10.32 10.32 10.32

Charges

Scafolding 83.43 119.47 155.49 191.53

labour
Applicable 16.69 23.89 31.10 38.31
Municipal Area
Allowance

Lift charges 0.00 18.88 37.76 56.64

Applicable 0.00 3.78 7.55 11.33
Municipal Area
Allowance

Applicable 93.17 102.14 111.11 120.08

Overheads and
Contractor's
profit

Rate per 1Sqm 777.47 852.34 927.19 1002.07

Say 777.00 852.00 927.00 1002.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors

35 of 171
 Rate as worked 573.86 573.86 573.86 573.86
out above

Scafolding 10.32 10.32 10.32 10.32

Charges
Scafolding 227.56 263.58 299.60 335.63
labour
Applicable 45.51 52.72 59.92 67.13
Municipal Area
Allowance

Lift charges 75.52 94.40 113.28 132.16

Applicable 15.10 18.88 22.66 26.43
Municipal Area
Allowance

Applicable 129.05 138.02 146.99 155.96

Overheads and
Contractor's
profit

Rate per 1 Sqm 1076.92 1151.78 1226.63 1301.49

Say 1077.00 1152.00 1227.00 1301.00

32 BLD-CSTN- Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash
5-17 cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50
Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged
into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement,
steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement
mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No.
of 509)

UNIT 10 Sqm
Material BMT-A.13 solid fly-ash 247 Nos 12025.98 1000 Nos 2970.42
blocks of size
290 x 100 x 140
mm

Material BLC-001 Cement 36 Kg 4700.00 1000 Kg 169.20

BLC-008 Cost of Sand 0.1 cum 3324.53 1 cum 332.45
Man power CMM-011 Mason Cl- I / 0.42 day 500.00 1 day 210.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 0.92 day 470.00 1 day 432.40

Brick layer Cl-II

CMM-087 Light mazdoor 2.8 day 445.00 1 day 1246.00

Applicable 20% 1888.40 377.68
Municipal Area
Allowance

Add: Water 1% 5738.15 57.38

charges
Sub-total 5795.53
Rate per 1 Sqm Say 579.55
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 579.55 579.55 579.55 579.55
out above

36 of 171
 Scafolding 10.32 10.32 10.32 10.32
Charges

Scafolding 83.43 119.47 155.49 191.53

labour
Applicable 16.69 23.89 31.10 38.31
Municipal Area
Allowance

Lift charges 0.00 18.88 37.76 56.64

Applicable 0.00 3.78 7.55 11.33
Municipal Area
Allowance

Applicable 93.94 102.91 111.88 120.86

Overheads and
Contractor's
profit

Rate per 1Sqm 783.93 858.80 933.65 1008.54

Say 784.00 859.00 934.00 1009.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 579.55 579.55 579.55 579.55
out above

Scafolding 10.32 10.32 10.32 10.32

Charges
Scafolding 227.56 263.58 299.60 335.63
labour
Applicable 45.51 52.72 59.92 67.13
Municipal Area
Allowance

Lift charges 75.52 94.40 113.28 132.16

Applicable 15.10 18.88 22.66 26.43
Municipal Area
Allowance

Applicable 129.83 138.80 147.77 156.74

Overheads and
Contractor's
profit

Rate per 1 Sqm 1083.39 1158.25 1233.10 1307.96

Say 1083.00 1158.00 1233.00 1308.00

Plastering
33 BLD-CSTN- Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top
8-10 coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour
charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-
charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

UNIT 10 Sqm
BASE COAT 8mm thick in CM(1:5)
Material BLC-001 Cement 31.7 Kg 4700.00 1000 Kg 148.99
BLC-008 Cost of Sand 0.11 cum 3324.53 1 cum 365.70
TOP COAT 4mm thick in CM(1:3)
Material BLC-001 Cement 19.2 Kg 4700.00 1000 Kg 90.24
BLC-008 Cost of Sand 0.04 cum 3324.53 1 cum 132.98

37 of 171
Man power CMM-011 Mason Cl- I / 0.63 day 500.00 1 day 315.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.47 day 470.00 1 day 690.90

Brick layer Cl-II

CMM-087 Light mazdoor 3.9 day 445.00 1 day 1735.50

Applicable 20% 2741.40 548.28
Municipal Area
Allowance

Add: Water 1% 4027.59 40.28

charges
Sub-total 4067.87
Rate per 1 Sqm Say 406.79
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 406.79 406.79 406.79 406.79
out above

Scafolding hire 2.46 2.46 2.46 2.46

Charges
Scafolding 16.71 23.70 30.69 37.70
Labour
Applicable 3.34 4.74 6.14 7.54
Municipal Area
Allowance

Lift charges 0.00 27.41 54.82 82.23

Applicable 0.00 5.48 10.96 16.45
Municipal Area
Allowance

Applicable 58.45 64.07 69.69 75.31

Overheads and
Contractor's
profit

Rate per 1Sqm 487.75 534.65 581.55 628.48

Say 488.00 535.00 582.00 628.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 406.79 406.79 406.79 406.79
out above

Scafolding hire 2.46 2.46 2.46 2.46

Charges
Scafolding 44.69 51.68 58.68 65.68
Labour
Applicable 8.94 10.34 11.74 13.14
Municipal Area
Allowance

Lift charges 109.64 137.05 164.46 191.87

Applicable 21.93 27.41 32.89 38.37
Municipal Area
Allowance

Applicable 80.93 86.55 92.18 97.80

Overheads and
Contractor's
profit

38 of 171
 Rate per 1 Sqm 675.38 722.28 769.20 816.11

Say 675.00 722.00 769.00 816.00

34 BLD-CSTN- Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of
8-10 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement,
sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing
mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and
overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

UNIT 10 Sqm
BASE COAT 8mm thick in CM(1:6)
Material BLC-001 Cement 26.4 Kg 4700.00 1000 Kg 124.08
BLC-008 Cost of Sand 0.11 cum 3324.53 1 cum 365.70
TOP COAT 4mm thick in CM(1:4)
Material BLC-001 Cement 14.4 Kg 4700.00 1000 Kg 67.68
BLC-008 Cost of Sand 0.04 cum 3324.53 1 cum 132.98
Man power CMM-011 Mason Cl- I / 0.63 day 500.00 1 day 315.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.47 day 470.00 1 day 690.90

Brick layer Cl-II

CMM-087 Light mazdoor 3.9 day 445.00 1 day 1735.50

Applicable 20% 2741.40 548.28
Municipal Area
Allowance

Add: Water 1% 3980.12 39.80

charges
Sub-total 4019.92
Rate per 1 Sqm Say 401.99
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 401.99 401.99 401.99 401.99
out above

Scafolding hire 1.03 1.03 1.03 1.03

Charges
Scafolding 8.35 11.95 15.54 19.15
Labour
Applicable 1.67 2.39 3.11 3.83
Municipal Area
Allowance

Lift charges 0.00 27.41 54.82 82.23

Applicable 0.00 5.48 10.96 16.45
Municipal Area
Allowance

Applicable 56.24 61.30 66.37 71.44

Overheads and
Contractor's
profit

Rate per 1Sqm 469.28 511.55 553.82 596.12

Say 469.00 512.00 554.00 596.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 401.99 401.99 401.99 401.99
out above

39 of 171
 Scafolding hire 1.03 1.03 1.03 1.03
Charges
Scafolding 22.75 26.37 29.97 33.56
Labour
Applicable 4.55 5.27 5.99 6.71
Municipal Area
Allowance

Lift charges 109.64 137.05 164.46 191.87

Applicable 21.93 27.41 32.89 38.37
Municipal Area
Allowance

Applicable 76.50 81.57 86.64 91.70

Overheads and
Contractor's
profit

Rate per 1 Sqm 638.39 680.69 722.97 765.23

Say 638.00 681.00 723.00 765.00

26 BLD-CSTN- Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM (1:6) and top coat of
8-9 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement,
sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS 901,903 & 904)

UNIT 10 Sqm
BASE COAT 16mm thick in CM(1:6)
Material Lead St Cement 43 Gr 43.00 Kg 4700.00 1000 Kg 202.10
(including
loading
charges)

Lead St Cost of Sand 0.18 cum 3324.53 1 cum 598.42

TOP COAT 4mm thick in CM(1:4)
Material Lead St Cement 43 Gr 14.50 Kg 4700.00 1000 Kg 68.15
(including
loading
charges)

Lead St Cost of Sand 0.04 cum 3324.53 1 cum 132.98

Man power CMM-011 Mason Cl- I / 0.63 day 500.00 1 day 315.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.47 day 470.00 1 day 690.90

Brick layer Cl-II

CMM-087 Light mazdoor 3.90 day 445.00 1 day 1735.50

Applicable 20% 2741.40 548.28
Municipal Area
Allowance

Add: Water 1% 4291.33 42.91

charges
Total 4334.24
Rate per 1 Sqm Say 433.42
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors

40 of 171
 Rate as worked 433.42 433.42 433.42 433.42
out above

Scafolding hire 1.03 1.03 1.03 1.03

Charges
Scafolding 8.35 11.95 15.54 19.15
Labour
Applicable 3.03 4.34 5.64 6.95
Municipal Area
Allowance

Lift charges 0.00 27.41 54.82 82.23

Applicable 0.00 5.48 10.96 16.45
Municipal Area
Allowance

Applicable 60.70 65.85 70.99 76.14

Overheads and
Contractor's
profit

Rate per 1Sqm 506.53 549.48 592.40 635.37

Say 507.00 549.00 592.00 635.00

Rate for other 4th 5th 6th 7th

Floors
Rate as worked 433.42 433.42 433.42 433.42
out above

Scafolding hire 1.03 1.03 1.03 1.03

Charges
Scafolding 22.75 26.37 29.97 33.56
Labour
Applicable 4.55 5.27 5.99 6.71
Municipal Area
Allowance

Lift charges 109.64 137.05 164.46 191.87

Applicable 21.93 27.41 32.89 38.37
Municipal Area
Allowance

Applicable 80.78 85.85 90.92 95.98

Overheads and
Contractor's
profit

Rate per 1 Sqm 674.10 716.40 758.68 800.94

Say 674.00 716.00 759.00 801.00

35 BLD-CSTN- Plastering 20mm thick using screened sand with CM (1:5) including cost and conveyance of all materials like
8-7 cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for
mixing mortar, finishing, curing, cutting grooves as directed by Engineer - in - charge and cost of overheads &
contractors profit etc., complete for finished item of work for basement. (SS 901,903 & 904)

UNIT 10 Sqm
Material BLC-001 Cement 60.48 Kg 4700.00 1000 Kg 284.26
BLC-008 Cost of Sand 0.21 cum 3324.53 1 cum 698.15
Man power CMM-077 Mason Cl- ll / 0.94 day 470.00 1 day 441.80
Brick layer Cl-II

CMM-087 Light mazdoor 1.6 day 445.00 1 day 712.00

41 of 171
 Applicable 20% 1153.80 230.76
Municipal Area
Allowance

Add: Water 1% 2366.97 23.67

charges
Sub-total 2390.64
Rate per 1 Sqm Say 239.06
Rate for other For Basement
Floors
Rate as worked 239.06
out above

Applicable 32.55
Overheads and
Contractor's
profit

Rate per 1Sqm 271.61

Say 272.00
36 BLD-CSTN- Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened
10-25 sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as
approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and
conveyance of all materials like cement, sand, water proofing compound, water etc., to site, all operational,
incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing,
rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work.
(APSS No. 901 & 903).

UNIT 10 Sqm
Material BLC-001 Cement 100.8 Kg 4700.00 1000 Kg 473.76
BLC-008 Cost of Sand 0.21 cum 3324.53 1 cum 698.15
Supply of 2 Kg 95.00 1 Kg 190.00
cement based
Impervious
Water Proofing
powder
compound

Man power CMM-011 Mason Cl- I / 0.66 day 500.00 1 day 330.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.54 day 470.00 1 day 723.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.7 day 445.00 1 day 1646.50

Applicable 20% 2700.30 540.06
Municipal Area
Allowance

Add: Water 1% 4602.27 46.02

charges
Sub-total 4648.29
Rate per 1 Sqm Say 464.83
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 464.83 464.83 464.83 464.83
out above

Lift charges 0.00 27.00 54.00 81.00

42 of 171
 Applicable gravel 5.40 10.80 16.20
Municipal Area
Allowance

Applicable 63.29 67.70 72.11 76.52

Overheads and
Contractor's
profit

Rate per 1Sqm 528.12 564.93 601.74 638.55

Say 528.00 565.00 602.00 639.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 464.83 464.83 464.83 464.83
out above

Lift charges 108.00 135.00 162.00 189.00

Applicable 21.60 27.00 32.40 37.80
Municipal Area
Allowance

Applicable 80.93 85.34 89.75 94.17

Overheads and
Contractor's
profit

Rate per 1 Sqm 675.36 712.17 748.98 785.80

Say 675.00 712.00 749.00 786.00

37 BLD-CSTN- Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in
17-10 layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to
work site, all operational, incidental, labour charges, such as mixing cement & cinder, cost of overheads and
contractor's profit etc. complete for finished item of work.

UNIT 1 cum
Material BLC-001 Cement 95 Kg 4700.00 1000 Kg 446.50
TBSC-R.I- Supply of well 1 cum 808.00 1 cum 808.00
02 burnt cinder
aggregates as
per IS: 2686-
1977

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I

CMM-087 Light mazdoor 2.36 day 445.00 1 day 1050.20

Applicable 20% 1100.20 220.04
Municipal Area
Allowance

Add: Water 1% 2574.74 25.75

charges
Sub-total 2600.49
Rate per 1 Cum Say 2600.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 2600.49 2600.49 2600.49 2600.49
out above

Lift charges 0.00 110.02 220.04 330.06

43 of 171
 Applicable 0.00 22.00 44.01 66.01
Municipal Area
Allowance

Applicable 354.06 372.03 390.01 407.98

Overheads and
Contractor's
profit

Rate per 1Cum 2954.55 3104.54 3254.55 3404.54

Say 2955.00 3105.00 3255.00 3405.00

Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 2600.49 2600.49 2600.49 2600.49
out above

Lift charges 440.08 550.10 660.12 770.14

Applicable 88.02 110.02 132.02 154.03
Municipal Area
Allowance

Applicable 425.96 443.93 461.91 479.88

Overheads and
Contractor's
profit

Rate per 1Cum 3554.55 3704.54 3854.54 4004.54

Say 3555.00 3705.00 3855.00 4005.00

38 BLD-CSTN- RCM facia 50mm thick in CM (1:3) using screened sand for drop walls, fins with rabbit wire mesh & nomianl
8-11 reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and conveyance of
all materials to site, all operationals &incidental charges,cost and conveyance of cement,wire mesh,water to work
site,centering,scaffolding and form work,lift charges etc., and overheads & contractors profit complete for finished
item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)

UNIT 10 Sqm
Material TBSC-E.I-12 Rabbit wire 13.3 Sqm 19.00 1 Sqm 252.70
mesh (chicken
mesh) of not
less than 30
gauge

Material BLC-001 Cement 120 Kg 4700.00 1000 Kg 564.00

Material BLC-001 Dry cement for 50 Kg 4700.00 1000 Kg 235.00
making lumps
BLC-008 Cost of Sand 0.25 cum 3324.53 1 cum 831.13
Plastering 12mm thick in two coats CM 21.8 sqm 398.01 1 sqm 8676.66
1:6 and CM 1:4
Machinery CMC-016 Concrete mixer 2 Hour 152.5 1 Hour 305.00
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 2 Hour 260 1 Hour 520.00
300 / 200
( diesel)
Municipal Area 20% 520.00 104.00
Allowance
applicable on
Machinery
crew

44 of 171
Man power CMM-011 Mason Cl- I / 8 day 500 1 day 4000.00
Brick layer Cl- I

CMM-087 Light mazdoor 10 day 445 1 day 4450.00

Applicable 20% 8450.00 1690.00
Municipal Area
Allowance

Add: Water 1% 21628.49 216.28

charges
Sub-total 21844.77
Rate per 1 Sqm Say 2184.48

Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 2184.48 2184.48 2184.48 2184.48
out above

Scafolding 1.03 1.03 1.03 1.03

Charges
Labour Charges 8.35 11.95 15.54 19.15

Applicable 1.67 2.39 3.11 3.83

Municipal Area
Allowance

Lift charges 0.00 89.70 179.40 269.10

Applicable 0.00 17.94 35.88 53.82
Municipal Area
Allowance

Applicable 298.92 314.16 329.41 344.65

Overheads and
Contractor's
profit

Rate per 1Sqm 2494.45 2621.65 2748.85 2876.06

Say 2494.00 2622.00 2749.00 2876.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 2184.48 2184.48 2184.48 2184.48
out above

Scafolding 1.03 1.03 1.03 1.03

Charges
Labour Charges 22.75 26.37 29.97 33.56

Applicable 4.55 5.27 5.99 6.71

Municipal Area
Allowance

Lift charges 358.80 448.50 538.20 627.90

Applicable 71.76 89.70 107.64 125.58
Municipal Area
Allowance

Applicable 359.89 375.14 390.38 405.63

Overheads and
Contractor's
profit

45 of 171
 Rate per 1 Sqm 3003.26 3130.49 3257.69 3384.89

Say 3003.00 3130.00 3258.00 3385.00

39 Supply and fixing of pre cast RCC Racks (1:1:2) proportion nominal mix (cement: fine aggregate: Coarse aggregate)
using 6mm HBG chips, cement and sand for cupboard racks and platforms as per the approved design including
cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, cost of
centering charges and shuttering machine mixing, laying concrete in position, curing etc., overheads & contractors
profit, lift charges for finished item of work. (APSS No. 402)

UNIT 10 Sqm
Material BLC-011 6mm Nominal 0.18 cum 958.91 1 cum 172.60
Aggregate
BLC-001 Cement 129.6 Kg 4700.00 1000 Kg 609.12
Plastering 10 Sqm 398.01 1 Sqm 3980.12
12mm thick
TBSC-E.I-12 Rabbit wire 10 Sqm 19 1 Sqm 190.00
mesh (chicken
mesh) of not
less than 30
gauge

Man power CMM-011 Mason Cl- I / 0.63 day 500 1 day 315.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.47 day 470 1 day 690.90

Brick layer Cl-II

CMM-087 Light mazdoor 3.9 day 445 1 day 1735.50

Applicable 20% 2741.40 548.28
Municipal Area
Allowance

Applicable 13.615% 8241.52 1122.08

Overheads and
Contractor's
profit

Sub-total 9363.60
Rate per 1 Sqm Say 936.36

Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 936.36 936.36 936.36 936.36
out above

Lift charges 0.00 27.41 54.82 82.23

Applicable 0.00 5.48 10.96 16.45
Municipal Area
Allowance

Applicable 127.49 131.96 136.44 140.92

Overheads and
Contractor's
profit

Rate per 1Sqm 1063.85 1101.21 1138.58 1175.96

Say 1064.00 1101.00 1139.00 1176.00

Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 936.36 936.36 936.36 936.36
out above

46 of 171
 Lift charges 109.64 137.05 164.46 191.87
Applicable 21.93 27.41 32.89 38.37
Municipal Area
Allowance

Applicable 145.40 149.88 154.35 158.83

Overheads and
Contractor's
profit

Rate per 1 Sqm 1213.33 1250.70 1288.06 1325.43

Say 1213.00 1251.00 1288.00 1325.00

40 BLD-CSTN- Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM
8-9 (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to
site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, cutting Grooves as directed by Engineer - in - charge etc., and overheads &
contractors profit, complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished
item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm (For Sumps & Septic tank)

UNIT 10 Sqm
BASE COAT 16mm thick in CM(1:6)
Material BLC-001 Cement 43 Kg 4700.00 1000 Kg 202.10
BLC-008 Cost of Sand 0.18 cum 3324.53 1 cum 598.42
TOP COAT 4mm thick in CM(1:4)
Material BLC-001 Cement 14.5 Kg 4700.00 1000 Kg 68.15
BLC-008 Cost of Sand 0.04 cum 3324.53 1 cum 132.98
Man power CMM-011 Mason Cl- I / 0.63 day 500.00 1 day 315.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.47 day 470.00 1 day 690.90

Brick layer Cl-II

CMM-087 Light mazdoor 3.9 day 445.00 1 day 1735.50

Applicable 20% 2741.40 548.28
Municipal Area
Allowance

Add: Water 1% 4291.33 42.91

charges
Applicable 13.615% 4334.24 590.11
Overheads and
Contractor's
profit

Sub-total 4924.35
Rate per 1 Sqm Say 492.00

Stone Flooring
41 BLD-CSTN- Flooring with Granite Floor tiles of size 600 x 300 mm not less than 8 mm thick of premium quality set over a base
9-9 coat of CM (1:8) prop. 12 mm thick and filling the joints with white cement mixed with pigment of matching shade
to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like
cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour
charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc.,
and overheads & contractors profit, complete for finished item of work. (APSS No.707 & 701)

UNIT 10 Sqm

47 of 171
Material TBSC-B.III- Granite stone 10.5 Sqm 1057 1 Sqm 11098.50
04 tiles 8 mm
thick (mirror
polished of all
shades)

BLC-001 Cement 21.6 Kg 4700.00 1000 Kg 101.52

BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29.00 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50

Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 15529.62 155.30

charges 1%
Sub-total 15684.92
Rate per 1 Sqm Say 1568.49
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1568.49 1568.49 1568.49 1568.49
out above

Lift charges 0.00 30.01 60.02 90.03

Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 213.55 218.45 223.36 228.26

Overheads and
Contractor's
profit

Rate per 1Sqm 1782.04 1822.95 1863.87 1904.79

Say 1782.00 1823.00 1864.00 1905.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1568.49 1568.49 1568.49 1568.49
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

Applicable 233.16 238.07 242.97 247.87

Overheads and
Contractor's
profit

Rate per 1 Sqm 1945.70 1986.62 2027.53 2068.44

Say 1946.00 1987.00 2028.00 2068.00

48 of 171
42 BLD-CSTN- Providing skirting with Granite Floor tiles of size 600 x 300 mm not less than 8 mm thick of premium quality set
9-21 over base coat of CM (1:5) 12mm thick with Grey cement slurry of honey like consistency spread at the rate of 3.3
Kgs of cement per Sq.m and jointed with white cement to full depth (joints of stone should be flushed)including
cost and conveyance of all materials like cement, sand, water, etc., to site, cost of base coat all labour charges like
dressing to the required size, mixing of mortar, curing and lift charges including cutting the brick wall to place the
stones and redoing the surface smooth and overheads & contractors profit, complete for finished item of works
(APSS No.707 & 701). The skirting should flush online with plastering.

UNIT 10 Sqm
Material TBSC-B.III- Granite stone 10.5 Sqm 1057.00 1 Sqm 11098.50
04 tiles 8 mm
thick (mirror
polished of all
shades)

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 2.1 day 500.00 1 day 1050.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 4.9 day 470.00 1 day 2303.00

Brick layer Cl-II

CMM-087 Light mazdoor 0.8 day 445.00 1 day 356.00

Applicable 20% 3709.00 741.80
Municipal Area
Allowance

Add water 1% 16410.77 164.11

charges 1%
Sub-total 16574.88
Rate per 1 Sqm Say 1657.49
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1657.49 1657.49 1657.49 1657.49
out above

Lift charges 0.00 37.09 74.18 111.27

Applicable 0.00 7.42 14.84 22.25
Municipal Area
Allowance

Applicable 225.67 231.73 237.79 243.85

Overheads and
Contractor's
profit

Rate per 1Sqm 1883.16 1933.73 1984.30 2034.86

Say 1883.00 1934.00 1984.00 2035.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1657.49 1657.49 1657.49 1657.49
out above

Lift charges 148.36 185.45 222.54 259.63

Applicable 29.67 37.09 44.51 51.93
Municipal Area
Allowance

49 of 171
 Applicable 249.91 255.97 262.03 268.09
Overheads and
Contractor's
profit

Rate per 1 Sqm 2085.43 2136.00 2186.57 2237.14

Say 2085.00 2136.00 2187.00 2237.00

43 BLD-CSTN- Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black)
9-7 set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat
cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste
mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance
of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of
base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by
the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS
No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 3118.43 1 Sqm 32743.52
01 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) of premium
colours (other
than black)

BLC-001 Cement 36 Kg 4700.00 1000 Kg 169.20

BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

Add water 1% 40542.73 405.43

charges 1%
Sub-total 40948.16
Rate per 1 Sqm Say 4094.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 4094.82 4094.82 4094.82 4094.82
out above

Lift charges 0.00 55.30 110.60 165.90

Applicable 0.00 11.06 22.12 33.18
Municipal Area
Allowance

Applicable 557.51 566.54 575.58 584.61

Overheads and
Contractor's
profit

Rate per 1Sqm 4652.33 4727.72 4803.12 4878.51

50 of 171
 Say 4652.00 4728.00 4803.00 4879.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 4094.82 4094.82 4094.82 4094.82
out above

Lift charges 221.20 276.50 331.80 387.10

Applicable 44.24 55.30 66.36 77.42
Municipal Area
Allowance

Applicable 593.65 602.68 611.72 620.75

Overheads and
Contractor's
profit

Rate per 1 Sqm 4953.91 5029.30 5104.70 5180.09

Say 4954.00 5029.00 5105.00 5180.00

44 BLD-CSTN- Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other than black)
9-19 in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey
like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed
with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all
materials like cement sand, water flooring stones etc. to site , cost of base coat and all operational and labour
charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc.
complete for finished item of work (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 3118.43 1 Sqm 32743.52
01 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black/
premium
colours

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
TBSC-T.I-13 Machine 66.67 Rmt 19.00 1 Rmt 1266.73
Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable 20% 506.69 101.34

Municipal Area
Allowance

TBSC-T.I-14 Flat Nosing 66.67 Rmt 58.00 1 Rmt 3866.86

Applicable 20% 1546.74 309.35

Municipal Area
Allowance

51 of 171
 Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

CMM-087 Light mazdoor 4.9 day 445 1 day 2180.50

Applicable 20% 3230.50 646.10
Municipal Area
Allowance

Add water 1% 43025.87 430.26

charges 1%
Sub-total 43456.13
Rate per 1 Sqm Say 4345.61
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 4345.61 4345.61 4345.61 4345.61
out above

Lift charges 0 52.84 105.68 158.52

Applicable 0.00 10.57 21.14 31.70
Municipal Area
Allowance

Applicable 591.65 600.29 608.92 617.55

Overheads and
Contractor's
profit

Rate per 1Sqm 4937.26 5009.31 5081.35 5153.38

Say 4937.00 5009.00 5081.00 5153.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 4345.61 4345.61 4345.61 4345.61
out above

Lift charges 211.36 264.20 317.04 369.88

Applicable 42.27 52.84 63.41 73.98
Municipal Area
Allowance

Applicable 626.19 634.82 643.45 652.09

Overheads and
Contractor's
profit

Rate per 1 Sqm 5225.43 5297.47 5369.51 5441.56

Say 5225.00 5297.00 5370.00 5442.00

45 BLD-CSTN- Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) (i.e. of shades
9-19 like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs
etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing
charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers
(S.S.701 & special)

i Risers of 0.15m height UNIT 10 Sqm

52 of 171
Material TBSC-B.III- High Polished 10.5 Sqm 3118.43 1 Sqm 32743.52
01 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black and
premium
colours

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10

BLC-001 Cement for CM 34.56 Kg 4700.00 1000 Kg 162.43
(1:5)
BLC-001 Sand for CM 0.12 cum 3324.53 1 Kg 398.94
(1:5)
TBSC-R.I- white cement 5 kg 29 1 Kg 145.00
01
Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

CMM-087 Light mazdoor 4.9 day 445 1 day 2180.50

Applicable 20% 3230.50 646.10
Municipal Area
Allowance

TBSC-T.I-13 Machine 66.67 Rmt 19.00 1 Rmt 1266.73

Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable 20% 506.69 101.34

Municipal Area
Allowance

Add water 1% 38849.66 388.50

charges 1%
Sub-total 39238.16
Rate per 1 Sqm Say 3923.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3923.82 3923.82 3923.82 3923.82
out above

Lift charges 0 37.37 74.74 112.11

Applicable 0.00 7.47 14.95 22.42
Municipal Area
Allowance

Applicable 534.23 540.33 546.44 552.54

Overheads and
Contractor's
profit

Rate per 1Sqm 4458.05 4508.99 4559.95 4610.89

Say 4458.00 4509.00 4560.00 4611.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3923.82 3923.82 3923.82 3923.82
out above

Lift charges 149.48 186.85 224.22 261.59

53 of 171
 Applicable 29.90 37.37 44.84 52.32
Municipal Area
Allowance

Applicable 558.65 564.76 570.86 576.97

Overheads and
Contractor's
profit

Rate per 1 Sqm 4661.85 4712.80 4763.74 4814.70

Say 4662.00 4713.00 4764.00 4815.00

46 BLD-CSTN- Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) (i.e. of shades
9-7 like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs
etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing
charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701
& special)

ii Treads of 0.3 m height UNIT 10 Sqm

Material TBSC-B.III- High Polished 10.5 Sqm 3118.43 1 Sqm 32743.52
01 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black and
premium
colours

Cost of Sand 0.12 cum 3324.53 1 cum 398.94

CM (1:5)
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
BLC-001 Cement for 34.56 Kg 4700.00 1000 Kg 162.43
(1:5)
TBSC-R.I- white cement 6 kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

TBSC-T.I-13 Machine 33.33 Rmt 19.00 1 Rmt 633.27

Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

TBSC-T.I-11 Half Rounding 33.33 Rmt 370.00 1 Rmt 12332.10

the edges of
Marble/
Granite .

54 of 171
 Applicable 20% 5186.15 1037.23
Municipal Area
Allowance

Add water 1% 54272.59 542.73

charges 1%
Rate per 1 Rmt Sub-total 54815.32
Rate per 1 Sqm Say 5481.53
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5481.53 5481.53 5481.53 5481.53
out above

Lift charges 0 107.16 214.32 321.48

Applicable 0.00 21.43 42.86 64.30
Municipal Area
Allowance

Applicable 746.31 763.82 781.33 798.83

Overheads and
Contractor's
profit

Rate per 1Sqm 6227.84 6373.94 6520.04 6666.14

Say 6228.00 6374.00 6520.00 6666.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5481.53 5481.53 5481.53 5481.53
out above

Lift charges 428.64 535.80 642.96 750.12

Applicable 85.73 107.16 128.59 150.02
Municipal Area
Allowance

Applicable 816.34 833.85 851.36 868.86

Overheads and
Contractor's
profit

Rate per 1 Sqm 6812.24 6958.34 7104.44 7250.53

Say 6812.00 6958.00 7104.00 7251.00

47 BLD-CSTN- Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other
9-19 than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like
consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed
with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all
materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour
charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc.
complete for finished item of work. (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 3118.43 1 Sqm 32743.52
01 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black/
premium
colours

BLC-001 Cement 96 Kg 4700.00 1000 Kg 451.20

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10

55 of 171
 TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

Man power CMM-011 Mason Cl- I / 4.9 day 470 1 day 2303.00
Brick layer Cl- I

CMM-087 Light mazdoor 0.8 day 445 1 day 356.00

Applicable 20% 3709.00 741.80
Municipal Area
Allowance

Add water 1% 38610.53 386.11

charges 1%
Total 38996.64
Rate per 1 Sqm Say 3899.66
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3899.66 3899.66 3899.66 3899.66
out above

Lift charges 0 37.09 74.18 111.27

Applicable 0.00 7.42 14.84 22.25
Municipal Area
Allowance

Applicable 530.94 537.00 543.06 549.12

Overheads and
Contractor's
profit

Rate per 1Sqm 4430.60 4481.17 4531.74 4582.30

Say 4431.00 4481.00 4532.00 4582.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3899.66 3899.66 3899.66 3899.66
out above

Lift charges 148.36 185.45 222.54 259.63

Applicable 29.67 37.09 44.51 51.93
Municipal Area
Allowance

Applicable 555.18 561.24 567.30 573.36

Overheads and
Contractor's
profit

Rate per 1 Sqm 4632.87 4683.44 4734.01 4784.58

Say 4633.00 4683.00 4734.00 4785.00

48 BLD-CSTN- Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set
9-7 over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement
slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed
with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all
materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base
coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the
Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701
& 707)

56 of 171
 UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 2709.43 1 Sqm 28449.02
02 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) of regular
colours (other
than black)

BLC-001 Cement 36 Kg 4700.00 1000 Kg 169.20

BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

Add water 1% 36248.23 362.48

charges 1%
Sub-total 36610.71
Rate per 1 Sqm Say 3661.07
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3661.07 3661.07 3661.07 3661.07
out above

Lift charges 0.00 55.30 110.60 165.90

Applicable 0.00 11.06 22.12 33.18
Municipal Area
Allowance

Applicable 498.45 507.49 516.52 525.56

Overheads and
Contractor's
profit

Rate per 1Sqm 4159.52 4234.92 4310.31 4385.71

Say 4160.00 4235.00 4310.00 4386.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3661.07 3661.07 3661.07 3661.07
out above

Lift charges 221.20 276.50 331.80 387.10

Applicable 44.24 55.30 66.36 77.42
Municipal Area
Allowance

Applicable 534.59 543.63 552.66 561.70

Overheads and
Contractor's
profit

Rate per 1 Sqm 4461.10 4536.50 4611.89 4687.29

57 of 171
 Say 4461.00 4537.00 4612.00 4687.00

49 BLD-CSTN- Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in
9-19 single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey
like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed
with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all
materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour
charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc.
complete for finished item of work (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 2709.43 1 Sqm 28449.02
02 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black/ regular
colours

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
TBSC-T.I-13 Machine 66.67 Rmt 19.00 1 Rmt 1266.73
Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable 20% 506.69 101.34

Municipal Area
Allowance

TBSC-T.I-14 Flat Nosing 66.67 Rmt 58.00 1 Rmt 3866.86

Applicable 20% 1546.74 309.35

Municipal Area
Allowance

Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

CMM-087 Light mazdoor 4.9 day 445 1 day 2180.50

Applicable 20% 3230.50 646.10
Municipal Area
Allowance

Add water 1% 38731.37 387.31

charges 1%
Sub-total 39118.68
Rate per 1 Sqm Say 3911.87
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3911.87 3911.87 3911.87 3911.87
out above

Lift charges 0 52.84 105.68 158.52

58 of 171
 Applicable 0.00 10.57 21.14 31.70
Municipal Area
Allowance

Applicable 532.60 541.23 549.87 558.50

Overheads and
Contractor's
profit

Rate per 1Sqm 4444.47 4516.51 4588.56 4660.59

Say 4444.00 4517.00 4589.00 4661.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3911.87 3911.87 3911.87 3911.87
out above

Lift charges 211.36 264.20 317.04 369.88

Applicable 42.27 52.84 63.41 73.98
Municipal Area
Allowance

Applicable 567.13 575.77 584.40 593.03

Overheads and
Contractor's
profit

Rate per 1 Sqm 4732.63 4804.68 4876.72 4948.76

Say 4733.00 4805.00 4877.00 4949.00

50 BLD-CSTN- Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades
9-19 like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs
etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and
overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special)

i Risers of 0.15m height UNIT 10 Sqm

Material TBSC-B.III- High Polished 10.5 Sqm 2709.43 1 Sqm 28449.02
02 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black and
regular colours

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10

BLC-001 Cement for CM 34.56 Kg 4700.00 1000 Kg 162.43
(1:5)
BLC-001 Sand for CM 0.12 cum 3324.53 1 Kg 398.94
(1:5)
TBSC-R.I- white cement 5 kg 29 1 Kg 145.00
01
Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

CMM-087 Light mazdoor 4.9 day 445 1 day 2180.50

59 of 171
 Applicable 20% 3230.50 646.10
Municipal Area
Allowance

TBSC-T.I-13 Machine 66.67 Rmt 19.00 1 Rmt 1266.73

Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable 20% 506.69 101.34

Municipal Area
Allowance

Add water 1% 34555.16 345.55

charges 1%
Sub-total 34900.71
Rate per 1 Sqm Say 3490.07
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3490.07 3490.07 3490.07 3490.07
out above

Lift charges 0 37.37 74.74 112.11

Applicable 0.00 7.47 14.95 22.42
Municipal Area
Allowance

Applicable 475.17 481.28 487.38 493.49

Overheads and
Contractor's
profit

Rate per 1Sqm 3965.24 4016.19 4067.14 4118.09

Say 3965.00 4016.00 4067.00 4118.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3490.07 3490.07 3490.07 3490.07
out above

Lift charges 149.48 186.85 224.22 261.59

Applicable 29.90 37.37 44.84 52.32
Municipal Area
Allowance

Applicable 499.60 505.70 511.81 517.91

Overheads and
Contractor's
profit

Rate per 1 Sqm 4169.05 4219.99 4270.94 4321.89

Say 4169.00 4220.00 4271.00 4322.00

60 of 171
51 BLD-CSTN- Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) (i.e. of shades
9-7 like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs
etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing
charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads
(S.S.701 & special)

ii Treads of 0.3 m height UNIT 10 Sqm

Material TBSC-B.III- High Polished 10.5 Sqm 2709.43 1 Sqm 28449.02
02 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black and
regular colours

Cost of Sand 0.12 cum 3324.53 1 cum 398.94

CM (1:5)
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
BLC-001 Cement for 34.56 Kg 4700.00 1000 Kg 162.43
(1:5)
TBSC-R.I- white cement 6 kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

TBSC-T.I-13 Machine 33.33 Rmt 19.00 1 Rmt 633.27

Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

TBSC-T.I-11 Half Rounding 33.33 Rmt 370.00 1 Rmt 12332.10

the edges of
Marble/
Granite .

Applicable 20% 5186.15 1037.23

Municipal Area
Allowance

Add water 1% 49978.09 499.78

charges 1%
Rate per 1 Rmt Sub-total 50477.87
Rate per 1 Sqm Say 5047.79
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5047.79 5047.79 5047.79 5047.79
out above

61 of 171
 Lift charges 0 107.16 214.32 321.48
Applicable 0.00 21.43 42.86 64.30
Municipal Area
Allowance

Applicable 687.26 704.76 722.27 739.78

Overheads and
Contractor's
profit

Rate per 1Sqm 5735.05 5881.14 6027.24 6173.35

Say 5735.00 5881.00 6027.00 6173.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5047.79 5047.79 5047.79 5047.79
out above

Lift charges 428.64 535.80 642.96 750.12

Applicable 85.73 107.16 128.59 150.02
Municipal Area
Allowance

Applicable 757.29 774.80 792.30 809.81

Overheads and
Contractor's
profit

Rate per 1 Sqm 6319.45 6465.55 6611.64 6757.74

Say 6319.00 6466.00 6612.00 6758.00

52 BLD-CSTN- Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than
9-19 black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency
spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment
of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like
cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour charges such as
mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for
finished item of work. (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 2709.43 1 Sqm 28449.02
02 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) other than
black/ regular
colours

BLC-001 Cement 96 Kg 4700.00 1000 Kg 451.20

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

Man power CMM-011 Mason Cl- I / 4.9 day 470 1 day 2303.00
Brick layer Cl- I

CMM-087 Light mazdoor 0.8 day 445 1 day 356.00

62 of 171
 Applicable 20% 3709.00 741.80
Municipal Area
Allowance

Add water 1% 34316.03 343.16

charges 1%
Total 34659.19
Rate per 1 Sqm Say 3465.92
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3465.92 3465.92 3465.92 3465.92
out above

Lift charges 0 37.09 74.18 111.27

Applicable 0.00 7.42 14.84 22.25
Municipal Area
Allowance

Applicable 471.89 477.95 484.01 490.06

Overheads and
Contractor's
profit

Rate per 1Sqm 3937.81 3988.38 4038.95 4089.50

Say 3938.00 3988.00 4039.00 4090.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3465.92 3465.92 3465.92 3465.92
out above

Lift charges 148.36 185.45 222.54 259.63

Applicable 29.67 37.09 44.51 51.93
Municipal Area
Allowance

Applicable 496.12 502.18 508.24 514.30

Overheads and
Contractor's
profit

Rate per 1 Sqm 4140.07 4190.64 4241.21 4291.78

Say 4140.00 4191.00 4241.00 4292.00

53 BLD-CSTN- Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8)
9-7 prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like
consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of
matching shade to match the shade of granite to full depth including cost and conveyance of all materials like
cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all
labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-
charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 2303.43 1 Sqm 24186.015
03 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) black

BLC-001 Cement 36 Kg 4700.00 1000 Kg 169.20

BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10

63 of 171
 TBSC-R.I- White Cement 6 Kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

Add water 1% 31985.23 319.85

charges 1%
Sub-total 32305.08
Rate per 1 Sqm Say 3230.51
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3230.51 3230.51 3230.51 3230.51
out above

Lift charges 0 55.30 110.60 165.90

Applicable 0.00 11.06 22.12 33.18
Municipal Area
Allowance

Applicable 439.83 448.87 457.90 466.94

Overheads and
Contractor's
profit

Rate per 1Sqm 3670.34 3745.74 3821.13 3896.53

Say 3670.00 3746.00 3821.00 3897.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3230.51 3230.51 3230.51 3230.51
out above

Lift charges 221.20 276.50 331.80 387.10

Applicable 44.24 55.30 66.36 77.42
Municipal Area
Allowance

Applicable 475.97 485.01 494.04 503.08

Overheads and
Contractor's
profit

Rate per 1 Sqm 3971.92 4047.32 4122.71 4198.11

Say 3972.00 4047.00 4123.00 4198.00

54 BLD-CSTN- Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) black in single piece with edges flat
9-19 nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the
rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching
shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand,
water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar,
dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of
work (APSS No.701 & 707)

UNIT 10 Sqm

64 of 171
Material TBSC-B.III- High Polished 10.5 Sqm 2303.43 1 Sqm 24186.02
03 Granite 16 to
18 mm thick up
to 8'-00 black

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 5 Kg 29.00 1 Kg 145.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
TBSC-T.I-13 Machine 66.67 Rmt 19.00 1 Rmt 1266.73
Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable 20% 506.69 101.34

Municipal Area
Allowance

TBSC-T.I-14 Flat Nosing 66.67 Rmt 58.00 1 Rmt 3866.86

Applicable 20% 1546.74 309.35

Municipal Area
Allowance

Man power CMM-011 Mason Cl- I / 2.1 day 500 1 day 1050.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 4.9 day 470 1 day 2303.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 6913.00 1382.60
Municipal Area
Allowance

Add water 1% 38887.37 388.87

charges 1%
Sub-total 39276.24
Rate per 1 Sqm Say 3927.62
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 3927.62 3927.62 3927.62 3927.62
out above

Lift charges 0 69.13 138.26 207.39

Applicable 0.00 13.83 27.65 41.48
Municipal Area
Allowance

Applicable 534.75 546.04 557.33 568.63

Overheads and
Contractor's
profit

Rate per 1Sqm 4462.37 4556.62 4650.86 4745.12

Say 4462.00 4557.00 4651.00 4745.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors

65 of 171
 Rate as worked 3927.62 3927.62 3927.62 3927.62
out above

Lift charges 276.52 345.65 414.78 483.91

Applicable 55.30 69.13 82.96 96.78
Municipal Area
Allowance

Applicable 579.92 591.22 602.51 613.81

Overheads and
Contractor's
profit

Rate per 1 Sqm 4839.36 4933.62 5027.87 5122.12

Say 4839.00 4934.00 5028.00 5122.00

55 BLD-CSTN- Providing Kitchen Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base
9-7 coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per
Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of
granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white
cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to
required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for
finished item of work (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-B.III- High Polished 10.5 Sqm 2303.43 1 Sqm 24186.02
03 Granite 16 to
18 mm thick up
to 8'-00 (2.43
M) black

BLC-001 Cement 36 Kg 4700.00 1000 Kg 169.20

BLC-008 Cost of Sand 0.2 cum 3324.53 1 cum 664.91
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29 1 Kg 174.00
01
Man power CMM-011 Mason Cl- I / 3 day 500 1 day 1500.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1 day 470 1 day 470.00

Brick layer Cl-II

CMM-087 Light mazdoor 8 day 445 1 day 3560.00

Applicable 20% 5530.00 1106.00
Municipal Area
Allowance

TBSC-T.I-13 Machine 16.67 Rmt 19.00 1 Rmt 316.73

Cutting charges
- for Marble/
Granite slabs
up to 50 mm
thick by
mechanical
device.

Applicable Municipal Area Allowance on 20% 126.69 25.34

labour part of cutting &Add
halfwater
rounding 1% 32327.30 323.27
charges 1%
Sub-total 32650.57
Rate per 1 Sqm Say 3265.06
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors

66 of 171
 Rate as worked 3265.06 3265.06 3265.06 3265.06
out above

Lift charges 0 56.57 113.14 169.71

Applicable 0.00 11.31 22.63 33.94
Municipal Area
Allowance

Applicable 444.54 453.78 463.02 472.26

Overheads and
Contractor's
profit

Rate per 1Sqm 3709.60 3786.72 3863.85 3940.97

Say 3710.00 3787.00 3864.00 3941.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 3265.06 3265.06 3265.06 3265.06
out above

Lift charges 226.28 282.85 339.42 395.99

Applicable 45.26 56.57 67.88 79.20
Municipal Area
Allowance

Applicable 481.51 490.75 499.99 509.24

Overheads and
Contractor's
profit

Rate per 1 Sqm 4018.11 4095.23 4172.35 4249.49

Say 4018.00 4095.00 4172.00 4249.00

56 BLD-CSTN- Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size
9-1 as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof
slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat
cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc.
complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying,
lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS
No.703 & 701)

UNIT 10 Sqm
Material Lead Polished 11 Sqm 164.42 1 Sqm 1808.62
Shahabad/
Tandur stone
slabs of 15 to
18 mm thick
(0.457x0.304)
or any other
size as
specified

BLC-001 Cement 21.6 Kg 4700.00 1000 Kg 101.52

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
BLC-001 Cement for 20 Kg 4700.00 1000 Kg 94.00
jointing
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 3.1 day 500.00 1 day 1550.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 1.1 day 470.00 1 day 517.00

Brick layer Cl-II

67 of 171
 CMM-087 Light mazdoor 0.86 day 445.00 1 day 382.70
Applicable 20% 2449.70 489.94
Municipal Area
Allowance

Add water 5497.82 54.98

charges 1% 1%
Sub-total 5552.80
Rate per 1 Sqm Say 555.28
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 555.28 555.28 555.28 555.28
out above

Lift charges 0 24.5 49.00 73.50

Applicable 0.00 4.90 9.80 14.70
Municipal Area
Allowance

Applicable 75.60 79.60 83.61 87.61

Overheads and
Contractor's
profit

Rate per 1Sqm 630.88 664.28 697.69 731.09

Say 631.00 664.00 698.00 731.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 555.28 555.28 555.28 555.28
out above

Lift charges 98.00 122.50 147.00 171.50

Applicable 19.60 24.50 29.40 34.30
Municipal Area
Allowance

Applicable 91.61 95.62 99.62 103.62

Overheads and
Contractor's
profit

Rate per 1 Sqm 764.49 797.90 831.30 864.70

Say 764.00 798.00 831.00 865.00

57 BLD-CSTN- Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm
9-23 thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,
complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)

UNIT 10 Sqm
Material Lead Polished 11 Sqm 164.42 1 Sqm 1808.62
Shahabad/
Tandur stone
slabs of 15 to
18 mm thick
(0.457x0.304)
or any other
size as
specified

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10

68 of 171
 BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.1 day 445.00 1 day 1379.50

Applicable 20% 2912.30 582.46
Municipal Area
Allowance

Add water 6019.85 60.20

charges 1% 1%
Sub-total 6080.05
Rate per 1 Sqm Say 608.01
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 608.01 608.01 608.01 608.01
out above

Lift charges 0 29.12 58.24 87.36

Applicable 0.00 5.82 11.65 17.47
Municipal Area
Allowance

Applicable 82.78 87.54 92.30 97.05

Overheads and
Contractor's
profit

Rate per 1Sqm 690.79 730.49 770.20 809.89

Say 691.00 730.00 770.00 810.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 608.01 608.01 608.01 608.01
out above

Lift charges 116.48 145.60 174.72 203.84

Applicable 23.30 29.12 34.94 40.77
Municipal Area
Allowance

Applicable 101.81 106.57 111.33 116.08

Overheads and
Contractor's
profit

Rate per 1 Sqm 849.60 889.30 929.00 968.70

Say 850.00 889.00 929.00 969.00

58 BLD-CSTN- Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement,
9-4 pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12
mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread
@ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all
materials like cement, sand water and tiles etc., overheads and contractors profit, complete for finished item of
work.

UNIT 10 Sqm

69 of 171
Material TBSC-C.VIII- Supplying 10.5 Sqm 258.00 1 Sqm 2709.00
02 Chequered
Cement
Concrete heavy
duty tiles
conforming to
IS: 13801 using
aggregates,
cement,
pigments of
size 300 x 300
BLC-001 Cement
mm and 28.8 Kg 4700.00 1000 Kg 135.36
BLC-001 Cement Slurry
thickness 20 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- mm WhiteofCement 6 Kg 29 1 Kg 174.00
01 any shades.
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-077 Mason Cl- ll / 0.96 day 470 1 day 451.20
Brick layer Cl-II

CMM-087 Light mazdoor 5.54 day 445 1 day 2465.30

Applicable 20% 2916.50 583.30
Municipal Area
Allowance

Add water 7072.20 70.72

charges 1% 1%
Sub-total 7142.92
Rate per 1 Sqm Say 714.29
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 714.29 714.29 714.29 714.29
out above

Lift charges 0.00 29.17 58.34 87.51

Applicable 0.00 5.83 11.67 17.50
Municipal Area
Allowance

Applicable 97.25 102.02 106.78 111.55

Overheads and
Contractor's
profit

Rate per 1Sqm 811.54 851.31 891.08 930.85

Say 812.00 851.00 891.00 931.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 714.29 714.29 714.29 714.29
out above

Lift charges 116.68 145.85 175.02 204.19

Applicable 23.34 29.17 35.00 40.84
Municipal Area
Allowance

Applicable 116.31 121.08 125.84 130.61

Overheads and
Contractor's
profit

Rate per 1 Sqm 970.62 1010.39 1050.15 1089.93

Say 971.00 1010.00 1050.00 1090.00

70 of 171
59 BLD-CSTN- Flooring with precast terrazzo plain tiles conforming to IS: 13801 using marble aggregates of size 10 mm , sand,
9-4 marble powder, white cement pigments etc., with terrazzo topping not less than 6 mm of tiles overall size not less
than 20 mm thick any coloured shades.. set over base coat of cement mortar (1:6) 12 mm thick over CC bed already
laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed
with neat cement to full depth mixed with pigment of matching shade , cost of all materials like cement, sand
water and tiles, overheads and contractors profit etc., complete for finished item of work.

UNIT 10 Sqm
Material TBSC-C.VII- precast 10.5 Sqm 278.00 1 Sqm 2919.00
02 terrazzo plain
tiles

BLC-001 Cement 28.8 Kg 4700.00 1000 Kg 135.36

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29 1 Kg 174.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-077 Mason Cl- ll / 0.96 day 470 1 day 451.20
Brick layer Cl-II

CMM-087 Light mazdoor 5.54 day 445 1 day 2465.30

Applicable 20% 2916.50 583.30
Municipal Area
Allowance

Add water 7282.20 72.82

charges 1% 1%
Sub-total 7355.02
Rate per 1 Sqm Say 735.50
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 735.50 735.50 735.50 735.50
out above

Lift charges 0.00 29.17 58.34 87.51

Applicable 0.00 5.83 11.67 17.50
Municipal Area
Allowance

Applicable 100.14 104.90 109.67 114.44

Overheads and
Contractor's
profit

Rate per 1Sqm 835.64 875.40 915.18 954.95

Say 836.00 875.00 915.00 955.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 735.50 735.50 735.50 735.50
out above

Lift charges 116.68 145.85 175.02 204.19

Applicable 23.34 29.17 35.00 40.84
Municipal Area
Allowance

Applicable 119.20 123.97 128.73 133.50

Overheads and
Contractor's
profit

Rate per 1 Sqm 994.72 1034.49 1074.25 1114.03

71 of 171
 Say 995.00 1034.00 1074.00 1114.00

60 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed
metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding
1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of
all materials like cement, metal sand and water, overheads & contractors profit, complete for finished item of work.
(APSS No.701 & 710)

UNIT 10 Sqm
Material Graded 6-12mm 0.17 cum 1203.91 1 Sqm 204.66
Metals graded
aggregate

BLC-001 Cement 120 Kg 4700.00 1000 Kg 564.00

BLC-008 Cost of Sand 0.085 cum 3134.53 1 cum 266.44
Man power Mason Cl- l / 1.25 day 500 1 day 625.00
Brick layer Cl-I
Mason Cl- ll / 0.06 day 470 1 day 28.20
Brick layer Cl-II

Light mazdoor 3 day 445 1 day 1335.00

Applicable 20% 1988.20 397.64
Municipal Area
Allowance

Add water 3420.94 34.21

charges 1% 1%
Total 3455.15
Rate per 1 Sqm Say 345.52
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 345.52 345.52 345.52 345.52
out above

Lift charges 0.00 19.88 39.76 59.64

Applicable 0.00 3.98 7.95 11.93
Municipal Area
Allowance

Applicable 47.04 50.29 53.54 56.79

Overheads and
Contractor's
profit

Rate per 1Sqm 392.56 419.67 446.77 473.88

Say 393.00 420.00 447.00 474.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 345.52 345.52 345.52 345.52
out above

Lift charges 79.52 99.40 119.28 139.16

Applicable 15.90 19.88 23.86 27.83
Municipal Area
Allowance

Applicable 60.03 63.28 66.53 69.78

Overheads and
Contractor's
profit

Rate per 1 Sqm 500.97 528.08 555.19 582.29

Say 501.00 528.00 555.00 582.00

72 of 171
 Tiles Flooring
61 BLD-CSTN- Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8
9-6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy
spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade
to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like
cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all
labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge
curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

UNIT 10 Sqm
Material TBSC-C.III- Supply of Non- 10.5 Sqm 300 1 Sqm 3150.00
01 skid red or
white full body
Ceramic floor
tiles of size 300
x 300 mm and
thickness
between 7-8
mm 1st quality

BLC-001 Cement 21.6 Kg 4700.00 1000 Kg 101.52

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 2 Kg 29.00 1 Kg 58.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50

Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 7465.12 74.65

charges 1%
Total 7539.77
Rate per 1 Sqm Say 753.98
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 753.98 753.98 753.98 753.98
out above

Lift charges 0.00 30.01 60.02 90.03

Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 102.65 107.56 112.46 117.36

Overheads and
Contractor's
profit

Rate per 1Sqm 856.63 897.55 938.46 979.38

Say 857.00 898.00 938.00 979.00

73 of 171
 Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 753.98 753.98 753.98 753.98
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

Applicable 122.27 127.17 132.07 136.98

Overheads and
Contractor's
profit

Rate per 1 Sqm 1020.30 1061.21 1102.12 1143.04

Say 1020.00 1061.00 1102.00 1143.00

62 BLD-CSTN- Skirting with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8
9-18 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs set over a base coat of CM (1:5) prop. 12mm thick including neat cement slurry of honey like consistancy
spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade
to match the shade of tiles, including cost and conveyance of all materials like cement, sand, water, ceramic tiles,
white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar as directed by the
Engineer-in-charge, curing etc., complete and cost of overheads and contractor profit for finished item of work.
(APSS No.707 & 701)

UNIT 10 Sqm
Material TBSC-C.I-
Supply of Non- 10.5 Sqm 300.00 1 Sqm 3150.00
01 skid red or
white full body
Ceramic floor
tiles of size 300
x 300 mm and
thickness
BLC-001 Cement
between 7-8 34.56 Kg 4700.00 1000 Kg 162.43
BLC-001 Cement
mm Slurry
1st quality 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- conforming
White Cement to 6 Kg 29.00 1 Kg 174.00
01 IS:13711,
IS:13712,
BLC-008 Cost of Sand
IS:13630 (Parts 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason
1 to 15)Cl-
of Iany
/ 0.77 day 500.00 1 day 385.00
Brick
colourlayer
and Cl- I
finish in all
shades and
CMM-087 designs
Light mazdoor 0.8 day 445.00 1 day 356.00
Applicable 20% 741.00 148.20
Municipal Area
Allowance

Add water 1% 4929.67 49.30

charges 1%
Total 4978.97
Rate per 1 Sqm Say 497.90
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 497.90 497.90 497.90 497.90
out above

Lift charges 0.00 7.41 14.82 22.23

Applicable 0.00 1.48 2.96 4.45
Municipal Area
Allowance

74 of 171
 Applicable 67.79 69.00 70.21 71.42
Overheads and
Contractor's
profit

Rate per 1Sqm 565.69 575.79 585.89 596.00

Say 566.00 576.00 586.00 596.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 497.90 497.90 497.90 497.90
out above

Lift charges 29.64 37.05 44.46 51.87

Applicable 5.93 7.41 8.89 10.37
Municipal Area
Allowance

Applicable 72.63 73.84 75.05 76.26

Overheads and
Contractor's
profit

Rate per 1 Sqm 606.10 616.20 626.30 636.40

Say 606.00 616.00 626.00 636.00

63 BLD-CSTN- Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with
9-18 any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and
thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement
slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured
cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water,
tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar,
laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

UNIT 10 Sqm
Material TBSC-C.IV- digital / 10.5 Sqm 500.00 1 Sqm 5250.00
03 polished glazed
full body
porcelain
highlighter wall
tiles of size 300
x 600 mm

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 2 Kg 29.00 1 Kg 58.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.77 day 500.00 1 day 385.00
Brick layer Cl- I

CMM-087 Light mazdoor 0.8 day 445.00 1 day 356.00

Applicable 20% 741.00 148.20
Municipal Area
Allowance

Add water 1% 6913.67 69.14

charges 1%
Sub-total 6982.81
Rate per 1 Sqm Say 698.28
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors

75 of 171
 Rate as worked 698.28 698.28 698.28 698.28
out above

Lift charges 0.00 7.41 14.82 22.23

Applicable 0.00 1.48 2.96 4.45
Municipal Area
Allowance

Applicable 95.07 96.28 97.49 98.70

Overheads and
Contractor's
profit

Rate per 1Sqm 793.35 803.45 813.55 823.66

Say 793.00 803.00 814.00 824.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 698.28 698.28 698.28 698.28
out above

Lift charges 29.64 37.05 44.46 51.87

Applicable 5.93 7.41 8.89 10.37
Municipal Area
Allowance

Applicable 99.91 101.12 102.33 103.54

Overheads and
Contractor's
profit

Rate per 1 Sqm 833.76 843.86 853.96 864.06

Say 834.00 844.00 854.00 864.00

64 BLD-CSTN- Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of
9-18 design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness
between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in
all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of
honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to
match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured
cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying
glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

UNIT 10 Sqm
Material TBSC-C.IV- Supply of 10.5 Sqm 500.00 1 Sqm 5250.00
02 digital /
polished glazed
full body
porcelain
wall tiles of size
300 x 600 mm
with any type
of design

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 2 Kg 29.00 1 Kg 58.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.77 day 500.00 1 day 385.00
Brick layer Cl- I

CMM-087 Light mazdoor 0.8 day 445.00 1 day 356.00

76 of 171
 Applicable 20% 741.00 148.20
Municipal Area
Allowance

Add water 1% 6913.67 69.14

charges 1%
Sub-total 6982.81
Rate per 1 Sqm Say 698.28
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 698.28 698.28 698.28 698.28
out above

Lift charges 0.00 7.41 14.82 22.23

Applicable 0.00 1.48 2.96 4.45
Municipal Area
Allowance

Applicable 95.07 96.28 97.49 98.70

Overheads and
Contractor's
profit

Rate per 1Sqm 793.35 803.45 813.55 823.66

Say 793.00 803.00 814.00 824.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 698.28 698.28 698.28 698.28
out above

Lift charges 29.64 37.05 44.46 51.87

Applicable 5.93 7.41 8.89 10.37
Municipal Area
Allowance

Applicable 99.91 101.12 102.33 103.54

Overheads and
Contractor's
profit

Rate per 1 Sqm 833.76 843.86 853.96 864.06

Say 834.00 844.00 854.00 864.00

65 BLD-CSTN- Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x600 mm and
9-5 thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or
RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed
neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth
including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site
(excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to
required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc.,
complete for finished item of work. (APSS No.701 & 707)

UNIT 10 Sqm

77 of 171
Material TBSC-C.II- Nano 10.5 Sqm 421.00 1 Sqm 4420.50
03 polished /stain
free soluble
salt
porcelain
vitrified tiles
screen printed
of size 600 x
600
mm and
thickness
between 8-10
mm 1st quality

BLC-001 Cement 21.6 Kg 4700.00 1000 Kg 101.52

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29.00 1 Kg 174.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50

Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 8851.62 88.52

charges 1%
Sub-total 8940.14
Rate per 1 Sqm Say 894.01
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 894.01 894.01 894.01 894.01
out above

Lift charges 0.00 30.01 60.02 90.03

Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 121.72 126.62 131.52 136.43

Overheads and
Contractor's
profit

Rate per 1Sqm 1015.73 1056.64 1097.55 1138.48

Say 1016.00 1057.00 1098.00 1138.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 894.01 894.01 894.01 894.01
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

78 of 171
 Applicable 141.33 146.23 151.14 156.04
Overheads and
Contractor's
profit

Rate per 1 Sqm 1179.39 1220.30 1261.22 1302.13

Say 1179.00 1220.00 1261.00 1302.00

66 BLD-CSTN- Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and
9-20 thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching
the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed
with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all
materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for
mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost
of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should
flush online with plastering.

UNIT 10 Sqm
Material TBSC-C.II- Nano 10.5 Sqm 421.00 1 Sqm 4420.50
03 polished /stain
free soluble
salt
porcelain
vitrified tiles
screen printed
of size 600 x
600
mm and
thickness
between 8-10
mm 1st quality

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 2 Kg 29.00 1 Kg 58.00
01
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50

Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 8796.53 87.97

charges 1%
Sub-total 8884.50
Rate per 1 Sqm Say 888.45
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 888.45 888.45 888.45 888.45
out above

Lift charges 0.00 30.01 60.02 90.03

79 of 171
 Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 120.96 125.87 130.77 135.67

Overheads and
Contractor's
profit

Rate per 1Sqm 1009.41 1050.33 1091.24 1132.16

Say 1009.00 1050.00 1091.00 1132.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 888.45 888.45 888.45 888.45
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

Applicable 140.57 145.48 150.38 155.28

Overheads and
Contractor's
profit

Rate per 1 Sqm 1173.07 1213.99 1254.90 1295.81

Say 1173.00 1214.00 1255.00 1296.00

67 BLD-CSTN- Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment
9-5 of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts
Premium 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick
colour over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3
kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the
shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white
cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar,
laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors
profit etc., complete for finished item of work. (APSS No.701 & 707)

UNIT 10 Sqm
Material TBSC-C.II- Supply of 10.5 Sqm 550.00 1 Sqm 5775.00
05 vitrified
polished floor
tiles of size not
less than 598 x
598 mm x 8
mm thickness
glossy finish
permium
colours

BLC-001 Cement 21.6 Kg 4700.00 1000 Kg 101.52

BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 6 Kg 29.00 1 Kg 174.00
01
BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

80 of 171
 CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50
Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 10206.12 102.06

charges 1%
Sub-total 10308.18
Rate per 1 Sqm Say 1030.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1030.82 1030.82 1030.82 1030.82
out above

Lift charges 0.00 30.01 60.02 90.030

Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 140.35 145.25 150.15 155.06

Overheads and
Contractor's
profit

Rate per 1Sqm 1171.17 1212.08 1252.99 1293.92

Say 1171.00 1212.00 1253.00 1294.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1030.82 1030.82 1030.82 1030.82
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

Applicable 159.96 164.86 169.76 174.67

Overheads and
Contractor's
profit

Rate per 1 Sqm 1334.83 1375.74 1416.65 1457.57

Say 1335.00 1376.00 1417.00 1458.00

68 BLD-CSTN- Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment
9-20 of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts
premium 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to
colour flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened
sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with
white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost
and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and
all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-
charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701
&707) The skirting should flush online with plastering.

UNIT 10 Sqm

81 of 171
Material TBSC-C.II- Supply of 10.5 Sqm 550.00 1 Sqm 5775.00
05 vitrified
polished floor
tiles of size not
less than 598 x
598 mm x 8
mm thickness
glossy finish
permium
colours

BLC-001 Cement 34.56 Kg 4700.00 1000 Kg 162.43

BLC-008 Cost of Sand 0.12 cum 3324.53 1 cum 398.94
BLC-001 Cement Slurry 33 Kg 4700.00 1000 Kg 155.10
TBSC-R.I- White Cement 2 Kg 29.00 1 Kg 58.00
01
Man power CMM-011 Mason Cl- I / 0.96 day 500.00 1 day 480.00
Brick layer Cl- I

CMM-077 Mason Cl- ll / 2.24 day 470.00 1 day 1052.80

Brick layer Cl-II

CMM-087 Light mazdoor 3.3 day 445.00 1 day 1468.50

Applicable 20% 3001.30 600.26
Municipal Area
Allowance

Add water 1% 10151.03 101.51

charges 1%
Sub-total 10252.54
Rate per 1 Sqm Say 1025.25
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1025.25 1025.25 1025.25 1025.25
out above

Lift charges 0.00 30.01 60.02 90.03

Applicable 0.00 6.00 12.00 18.01
Municipal Area
Allowance

Applicable 139.59 144.49 149.39 154.30

Overheads and
Contractor's
profit

Rate per 1Sqm 1164.84 1205.75 1246.66 1287.59

Say 1165.00 1206.00 1247.00 1288.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1025.25 1025.25 1025.25 1025.25
out above

Lift charges 120.04 150.05 180.06 210.07

Applicable 24.01 30.01 36.01 42.01
Municipal Area
Allowance

Applicable 159.20 164.10 169.01 173.91

Overheads and
Contractor's
profit

82 of 171
 Rate per 1 Sqm 1328.50 1369.41 1410.33 1451.24

Say 1329.00 1369.00 1410.00 1451.00

PAINTING
71 BLD-CSTN- Painting to walls with two coats of water proof cement paint of snowcem or equivalent of approved brand and
12-5 shade over a base coat of water based Cement Primer of Exterior Grade- 2of approved brand, making 3 coats in all
to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered
materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges
etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls
for:-External Colouring - Water proof cement paint - 3 Coats.

One Coat of Primer UNIT 10 Sqm

Material TBSC-G.I- Supply of water 1 Kg 191.00 1 Kg 191.00
02 based Cement
Primer of
Exterior Grade-
2

Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
Applicable 20% 350 70.00
Municipal Area
Allowance

Two coats Water proof cement

Material TBSC-G.II- Supply of water 3.5 Kg 51.00 1 Kg 178.50
04 proof Cement
paint pack

Man power CMM-035 Painter Cl- I 0.15 day 570.00 1 day 85.50
CMM-079 Painter Cl- II 0.35 day 470.00 1 day 164.50
CMM-087 Light mazdoor 1.5 day 445.00 1 day 667.50
Applicable 20% 917.5 183.50
Municipal Area
Allowance

Applicable 13.615% 1890.5 257.39

Overheads and
Contractor's
profit

Total 2147.89
Rate per 1 Sqm Say 215.00

83 of 171
72 BLD-CSTN- Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC
12-17-10 (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of
approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after
thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of
overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring -
Plastic emulsion paint - 3 Coats.

One Coat of Primer UNIT 10 Sqm

Material TBSC-G.I- Supply of water 1 Kg 191.00 1 Kg 191.00
02 based Cement
Primer of
Exterior Grade-
2

Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
Applicable 20% 350 70.00
Municipal Area
Allowance

Two coats Plastic emulsion paint

Material TBSC-G.III- Supply of 0.8 Ltr 204.00 1 Ltr 163.20
02 synthetic
polymer plastic
emulsion paint

Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
CMM-087 Light mazdoor 1.5 day 445.00 1 day 667.50
Applicable 20% 1017.5 203.50
Municipal Area
Allowance

Applicable 13.615% 1995.2 271.65

Overheads and
Contractor's
profit

Total 2266.85
Rate per 1 Sqm Say 227.00

73 BLD-CSTN- Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based
12-17-14 such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the
surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered
materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty
knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to
work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit
for finished item of work for external walls - including cost of access scaffolding for:-External Putty

One Coat of Putty Grade Primer UNIT 10 Sqm

Material TBSC-G.I- Wall putty of 34.5 Kg 35.00 1 Kg 1207.50
03 white cement
or polymer or
cement based

Man power CMM-035 Painter Cl- I 0.546 day 570.00 1 day 311.22
CMM-079 Painter Cl- II 1.274 day 470.00 1 day 598.78
CMM-087 Light mazdoor 1.82 day 445.00 1 day 809.90
Applicable 20% 1719.9 343.98
Municipal Area
Allowance

Total 3271.38

84 of 171
 Rate per 1 Sqm Say 327.14
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 327.14 327.14 327.14 327.14
out above

Scafolding 1.03 1.03 1.03 1.03

Charges

Scafolding 8.35 11.95 15.54 19.15

labour
Applicable 1.67 2.39 3.11 3.83
Municipal Area
Allowance
Applicable 46.04 46.63 47.22 47.81
Overheads and
Contractor's
profit

Rate per 1 cum 384.23 389.14 394.04 398.96

Say 384.00 389.00 394.00 399.00

Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 327.14 327.14 327.14 327.14
out above

Scafolding 1.03 1.03 1.03 1.03

Charges
Scafolding 22.75 26.37 29.97 33.56
labour
Applicable 4.55 5.27 5.99 6.71
Municipal Area
Allowance
Applicable 48.40 48.99 49.58 50.16
Overheads and
Contractor's
profit

Rate per 1 cum 403.87 408.80 413.71 418.60

Say 404.00 409.00 414.00 419.00

74 BLD-CSTN- Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic
12-17-14 copolymers and mineral compounds, bactericides and various additives of NCL/ Saicoat texture paint or equivalent
of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly
brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for
the surface preparation including cost and conveyance of all materials to work site and all operational, incidental,
labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external
walls - including cost of access scaffolding for:-External Colouring - Providing / Texture to External walls.

One Coat of Putty Grade Primer UNIT 10 Sqm

Material TBSC-G.VI- Exterior grade 34.5 Kg 37.00 1 Kg 1276.50
01 Texture ready
mixed paint
with sand
texture added
sand particles
Man power CMM-035 Acrylic
Painter Cl- I 0.546 day 570.00 1 day 311.22
CMM-079 copolymers
Painter Cl- II 1.274 day 470.00 1 day 598.78
and mineral
CMM-087 compounds,
Light mazdoor 1.82 day 445.00 1 day 809.90
bactericides
Applicable 20% 1719.9 343.98
and variousArea
Municipal
additives.
Allowance

85 of 171
 Sub-total 3340.38
Rate per 1 Sqm Say 334.04
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 334.04 334.04 334.04 334.04
out above

Scafolding 1.03 1.03 1.03 1.03

Charges
Scafolding 8.35 11.95 15.54 19.15
labour
Applicable 1.67 2.39 3.11 3.83
Municipal Area
Allowance
Applicable 46.98 47.57 48.16 48.75
Overheads and
Contractor's
profit

Rate per 1 cum 392.07 396.98 401.88 406.80

Say 392.00 397.00 402.00 407.00

Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 334.04 334.04 334.04 334.04
out above

Scafolding 1.03 1.03 1.03 1.03

Charges
Scafolding 22.75 26.37 29.97 33.56
labour
Applicable 4.55 5.27 5.99 6.71
Municipal Area
Allowance
Applicable 49.34 49.93 50.52 51.10
Overheads and
Contractor's
profit

Rate per 1 cum 411.71 416.64 421.55 426.44

Say 412.00 417.00 422.00 426.00

75 BLD-CSTN- Painting to new walls with 2 coats of ready mixed oil bound washable distemper having VOC content less than 50
12-1 grams/liter of approved brand and shade over a base coat of appropriate primer of interior grade-1 of approved
brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials, including cost and conveyance of all materials to work site and all
operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item
of work as per SS 911 for internal walls.

One Coat of Primer UNIT 10 Sqm

Material TBSC-G.I- Supply of water 0.5 Kg 150.00 1 Kg 75.00
01 based Cement
Primer of
Interior Grade-
1

Man power CMM-035 Painter Cl- I 0.08 day 570.00 1 day 45.60
CMM-079 Painter Cl- II 0.19 day 470.00 1 day 89.30
Applicable 20% 134.9 26.98
Municipal Area
Allowance

Two coats OBD

86 of 171
 Material TBSC-G.II- Supply of 1.7 Kg 54.00 1 Kg 91.80
03 acrylic based
Oil Bound
washable
Distemper

Man power CMM-035 Painter Cl- I 0.36 day 570.00 1 day 205.20
CMM-079 Painter Cl- II 0.84 day 470.00 1 day 394.80
Applicable 20% 600 120.00
Municipal Area
Allowance

Applicable 13.615% 1048.68 142.78

Overheads and
Contractor's
profit

Total 1191.46
Rate per 1 Sqm Say 119.00

76 BLD-CSTN- Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic
12-17-9 Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water
based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials
to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit
for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.

One Coat of Primer UNIT 10 Sqm

Material TBSC-G.I- Supply of water 0.5 Kg 150.00 1 Kg 75.00
01 based Cement
Primer of
Interior Grade-
1

Man power CMM-035 Painter Cl- I 0.08 day 570.00 1 day 45.60
CMM-079 Painter Cl- II 0.19 day 470.00 1 day 89.30
Applicable 20% 134.9 26.98
Municipal Area
Allowance

Two coata Plastic emulsion

Material TBSC-G.III- Supply of 0.8 Ltr 195.00 1 Ltr 156.00
01 synthetic
polymer plastic
emulsion paint

Man power CMM-035 Painter Cl- I 0.36 day 570.00 1 day 205.20
CMM-079 Painter Cl- II 0.84 day 470.00 1 day 394.80
Applicable 20% 600 120.00
Municipal Area
Allowance

Applicable 13.615% 1112.88 151.52

Overheads and
Contractor's
profit

Total 1264.40
Rate per 1 Sqm Say 126.00

87 of 171
77 BLD-CSTN- Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based
12-17 such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the
surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered
materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty
knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to
work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls -
:-Internal Colouring - Providing Putty.

UNIT 10 Sqm
Material TBSC-G.I- Wall putty of 23 Kg 35.00 1 Kg 805.00
03 white cement
or polymer or
cement based

Man power CMM-035 Painter Cl- I 0.273 day 570.00 1 day 155.61
CMM-079 Painter Cl- II 0.637 day 470.00 1 day 299.39
CMM-087 Light mazdoor 0.91 day 445.00 1 day 404.95
Applicable 20% 859.95 171.99
Municipal Area
Allowance

Applicable 13.615% 1836.94 250.10

Overheads and
Contractor's
profit

Total 2087.04
Rate per 1 Sqm Say 209.00

78 BLD-CSTN- Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile
12-12 Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer
Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand
papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site
including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including
cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.

One Coat of Primer UNIT 10 Sqm

Material TBSC-G.I- Supply of Red 0.7 Liter 129.00 1 Liter 90.30
05 Oxide Primer
Paint for iron
works of Grade
-1

Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
Applicable 20% 350.00 70.00
Municipal Area
Allowance

Synthetic Enamel paint Grade - I

Material TBSC-G.V- Supply of ready 1.1 Liter 251.00 1 Liter 276.10
01 mixed
Synthetic
Enamel paints
in all shades
Grade - I

Man power CMM-035 Painter Cl- I 0.33 day 570.00 1 day 188.10
CMM-079 Painter Cl- II 0.77 day 470.00 1 day 361.90
Applicable 20% 550.00 110.00
Municipal Area
Allowance

88 of 171
 Applicable 13.615% 1446.40 196.93
Overheads and
Contractor's
profit

Total 1643.33
Rate per 1 Sqm Say 164.00

79 BLD-CSTN- Painting to flush shutters two coats of ready mixed synthetic enamel paint Grade-I of approved shade having VOC
12-12 (Volatile organic compound)content less than 50 grams/liter over wood primer coat including cost and conveyance
of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for
neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all
floors.

UNIT 10 Sqm
Wood primer
Material TBSC-G.I- Supply of 0.7 Kg 144.00 1 Kg 100.80
07 Wood Primer
Labour charges for primer
Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
Applicable 20% 350.00 70.00
Municipal Area
Allowance

Synthetic Enamel paint Grade - I

Material TBSC-G.V- Supply of ready 1.2 Liter 251.00 1 Liter 301.20
01 mixed
Synthetic
Enamel paints
in all shades
Grade - I

Man power CMM-035 Painter Cl- I 0.36 day 570.00 1 day 205.20
CMM-079 Painter Cl- II 0.84 day 470.00 1 day 394.80
Applicable 20% 600.00 120.00
Municipal Area
Allowance

Applicable 13.615% 1542.00 209.94

Overheads and
Contractor's
profit

Total 1751.94
Rate per 1 Sqm Say 175.00

80 BLD-CSTN- Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying
12-14 emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off
loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand
with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery
paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing
thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved
brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved
brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads &
contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood
Work.

UNIT 10 Sqm
Material TBSC-G.VII- Supply of 0.65 Liter 317.00 1 Liter 206.05
01 Melamine
Polish

89 of 171
 Material TBSC-G.I- Supply of 0.33 Liter 133.00 1 Liter 43.89
14 thinner for
melamine
polish/ french
polish

Man power CMM-035 Painter Cl- I 2.4 day 570.00 1 day 1368.00
CMM-079 Painter Cl- II 5.6 day 470.00 1 day 2632.00
CMM-087 Light mazdoor 8 day 445.00 1 day 3560.00
Applicable 20% 7560.00 1512.00
Municipal Area
Allowance

Applicable 13.615% 9321.94 1269.18

Overheads and
Contractor's
profit

Total 10591.12
Rate per 1 Sqm Say 1059.00

81 BLD-CSTN- White washing three coats with paint grade white lime to ceiling and basement to give an even shade after
11-6 thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and
conveyance of alll materials to site , labour charges and incidental charges such as scaffolding , lift charges etc.,
complete and cost of overheads & contractors profit complete for finished item of work .

UNIT 10 Sqm
Three coats white washing
Material TBSC-G.II- Supply of paint 2.8 Kg 22.00 1 Kg 61.60
01 grade white
lime for wash

Man power CMM-035 Painter Cl- I 0.09 day 570.00 1 day 51.30
CMM-079 Painter Cl- II 0.21 day 470.00 1 day 98.70
CMM-087 Light mazdoor 0.43 day 445.00 1 day 191.35
Applicable 20% 341.35 68.27
Municipal Area
Allowance

Applicable 13.615% 471.22 64.16

Overheads and
Contractor's
profit

Total 535.38
Rate per 1 Sqm Say 54.00

82 BLD-CSTN- Painting to new wood work with luppam finish to give even & smooth surface and painting two coats with synthetic
12-12 enamel paint 1st grade of approved brand and shade having VOC (Volatile organic compound) content less than 50
grams/liter over wood primer coat, including cost and conveyance of all materials to site, all labour charges ,
including sand paper on lappam coats for neat even and glossy surface, including cost of overheads & contractors
profit, etc. complete for finished item of work as directed by Engineer-in-charge during exection - for all floors.

cost of 1st class putty UNIT 10 Sqm

Material TBSC-G.I- Supply of Putty 0.7 Kg 144.00 1 Kg 100.80
09 for wood work

Labour charges for applying primer &

putty
Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30

90 of 171
 Applicable 20% 350.00 70.00
Municipal Area
Allowance

Wood primer
Material TBSC-G.I- Supply of 0.7 Kg 144.00 1 Kg 100.80
07 Wood Primer
Labour charges for applying primer & put
Man power CMM-035 Painter Cl- I 0.21 day 570.00 1 day 119.70
CMM-079 Painter Cl- II 0.49 day 470.00 1 day 230.30
Applicable 20% 350.00 70.00
Municipal Area
Allowance
Synthetic Enamel paint Grade - I
Material TBSC-G.V- Supply of ready 1.2 Liter 251.00 1 Liter 301.20
01 mixed
Synthetic
Enamel paints
in all shades
Grade - I

Man power CMM-035 Painter Cl- I 0.36 day 570.00 1 day 205.20
CMM-079 Painter Cl- II 0.84 day 470.00 1 day 394.80
Applicable 20% 600.00 120.00
Municipal Area
Allowance

Applicable 13.615% 2062.80 280.85

Overheads and
Contractor's
profit

Total 2343.65
Rate per 1 Sqm Say 234.00

83 BLD-CSTN- Painting to walls with 2 coats water proof cement paint or snowcem or equivalent of approved brand and shade
12-3 over existing paint surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered
materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges
etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls
for:-External Colouring - Water proof cement paint - 2 Coats

UNIT 10 Sqm
Two coats Water proof cement
Material TBSC-G.II- Supply of water 3.5 Kg 51.00 1 Kg 178.50
04 proof Cement
paint pack

Man power CMM-035 Painter Cl- I 0.15 day 570.00 1 day 85.50
CMM-079 Painter Cl- II 0.35 day 470.00 1 day 164.50
CMM-087 Light mazdoor 1.5 day 445.00 1 day 667.50
Applicable 20% 917.50 183.50
Municipal Area
Allowance

Applicable 13.615% 1279.50 174.20

Overheads and
Contractor's
profit

Total 1453.70
Rate per 1 Sqm Say 145.00

91 of 171
84 BLD-CSTN- Painting to new iron works with 2 coats of approved synthetic enamel paint of approved brand and shade to give
12-12 an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including
cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost
of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to
New Iron Work - 2 coats

UNIT 10 Sqm
Two coats new iron work
Material TBSC-G.V- Supply of ready 1.1 Liter 251.00 1 Liter 276.10
01 mixed
Synthetic
Enamel paints
in all shades
Grade - I

Man power CMM-035 Painter Cl- I 0.33 day 570.00 1 day 188.10
CMM-079 Painter Cl- II 0.77 day 470.00 1 day 361.90
Applicable 20% 550.00 110.00
Municipal Area
Allowance

Applicable 13.615% 936.10 127.45

Overheads and
Contractor's
profit

Total 1063.55
Rate per 1 Sqm Say 106.00

85 Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using Stainless Steel Tubes, sections,
plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and
conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel
welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors
profit etc ., complete for finished item of work.

UNIT 1 kg
Material TBSC-E.III- Stainless Steel 1.05 Kg 387 1 Kg 406.35
01 Tubes,
sections,
plates, sheets
& pipes of all
sizes &
diameters -
304 Grade

Man power TBSC-T.I-20 Labour charges 1 Kgs. 146 1 Kgs. 146

for Fabrication
of stainless
steel railing
works using
stainless steel
welding rods
including
buffing,
polishing,
lacquer
finishing, to
present
seamless finish

Applicable 20% 58.4 11.68

Municipal Area
Allowance

92 of 171
 Applicable 13.615% 564.03 76.79
Overheads and
Contractor's
profit

Total 640.82
Rate per 1 KG Say 641
86 Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick
galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre
mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm
and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard
bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot
hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade),
fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding
screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for Double shutter Window with
vertical mullion of sizes 3’0” x 4’0” ( 914.4mm x 1219.2mm) and 4’0” x 4’0” (1219.2mm x 1219.2mm) including
overheads and contractor profit etc., complete for finished item of work.

UNIT 1 Sqm
A Material TBSC-M.I- 1 Sqm 7,996.00 1 Sqm 7,996.00
09
Applicable 13.615% 7996.00 1088.66
Overheads and
Contractor's
profit

Total 9084.66
Rate per 1 Sqm Say 9085.00
87 Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick
galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72 x 55mm, centre
mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm
and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard
bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot
hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade),
fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding
screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for a size 6’0”x4’0” (1828.8mm
x1219.2mm) including overheads and contractor profit etc., complete for finished item of work

UNIT 1 Sqm
A Material TBSC-M.I- 1 Sqm 6,361.00 1 Sqm 6,361.00
11
Applicable 13.615% 6361.00 866.05
Overheads and
Contractor's
profit

Total 7227.05
Rate per 1 Sqm Say 7227.00

93 of 171
88 Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick
galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and
fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and
fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos.
of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick
plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self
expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of
work for (i) Single open able ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section
size of 100 x 45mm, Glazed and fly mesh shutter frame section size of 52 x 25mm thick and (ii) Double open able
ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm,
Glazed and fly mesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm and (iii)
Double open able fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame section size 100 x
45mm , Glazed and fly mesh shutter frame section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm,
including overheads & contractors profit, complete for finished item of work.

UNIT 1 Sqm
A Material TBSC-M.III- 1 Sqm 7,532.00 1 Sqm 7,532.00
05
Applicable 13.615% 7532.00 1025.48
Overheads and
Contractor's
profit

Total 8557.48
Rate per 1 Sqm Say 8557.00
89 Providing 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm of ISI marked including cost of necessary PVC
Bends, shoes, PVC clamps and all other accessories and fixing in position including cost and conveyance of all
materials to site, operational & incidental charges, all labour charges for fixing at site etc., and Overheads &
Contractors profit complete for finished item of work. (APSS No. 1328)

A 110mm dia UNIT 6 Rmt

TBSP-H.I- 110 mm dia 3 6 Rmt 479 3 Rmt 958
03 M Single Socket
PVC/SWR pipe
- 4 Kg/sq.cm

TBSP-H.II- 110 mm dia - 1 No 83 1 No 83

12 Plain Bend 87.5
Degree -
UPVC/SWR

TBSP-H.II- 110 mm dia - 1 No 57 1 No 57

48 Coupler -
UPVC/SWR
Pipe fittings

MS Clamps, 6 Nos 18 1 Nos 108

TBSP-J.I-22 Cutting holes in 1 No 47 1 No 47
Brick masonry
& repairs
Labour charges
only

Add for solvent cement,nails etc.

TBSP-H.IV- Labour charges 6 Rmt 76 1 Rmt 456.00
01 for laying,
fixing and
commissioning
the PVC pipes
including
couplers/
bends/ tees etc
Applicable 20% 503.00 100.60
any diameter
Municipal Area
including
Allowancefixing
necessary
fittings like
bends, plugs,
couplers,
junctions, tees,
etc with
solvent jointing 94 of 171
as per standard
practice
 Applicable 13.615% 1809.6 246.38
Overheads and
Contractor's
profit

Total 2055.98
Rate per 1 Sqm Say 343
90 Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to
required sizes and shapes,placing in position as per approved designs and drawings, including cost and conveyance
of all Mild steel Tubes & Pipes sections and all wastages such as overlaps, couplings, welede joints, etc., and all
operational, incidental charges, including Labour charges for fabricating all heavy steel works like
Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour
charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain
pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for
finished item of work.

UNIT 1 Kg
Material TBSC-E.I-15 Mild Steel 1.05 Kg 61.00 1 Kg 64.05
Tubes & pipes
of all Diameters
as per IS-1161

Man power TBSC-T.I-18 Labour charges 1 Kg 27.00 1 Kg 27.00

for fabricating
all structural
steel works like
heavy steel
works like
Trusses,
Stanchions,
Heavy Beams
and Girders
Man power TBSC-T.I-19 including cost
Labour charges 1 Kg 24.00 1 Kg 24.00
of welding
for erecting &
rods,
fixing power
all
charges,
structuraletc
excluding
steel works cost
like
of fixing
heavy in
iron
position
grills, Trusses,
Stanchions,
Heavy Beams
and Girders
erecting in
position and
fixing by using
Applicable 20% 20.40 4.08
chain pulley
Municipal Area
blocks,
Allowance
Derek pole
arrangements
and cranes etc.,
Applicable 13.615% 119.13 16.22
complete inand
Overheads
position
Contractor's
profit

Rate per 1 KG say 135.35

91 Providing Mild Steel, Structural Steel, I.e., Angles, Channels, MS Plates and I sections of different sizes, cutting and
fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost
and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all
operational, incidental charges, Including Labour charges for fabricating all heavy steel works like
Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour
charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain
pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for
finished item of work.

A Structural Member UNIT 1 Kg

95 of 171
 Material Structural Steel 1.05 Kg 34.00 1 Kg 35.70
Angles/
Channels/
Beams

Man power TBSC-T.I-18 Labour charges 1 Kg 27.00 1 Kg 27.00

for fabricating
all structural
steel works like
heavy steel
works like
Trusses,
Stanchions,
Heavy Beams
and Girders
including cost
of welding
Man power TBSC-T.I-19 Labour charges
rods, power 1 Kg 24.00 1 Kg 24.00
for erecting
charges, etc &
fixing all cost
excluding
structural
of fixing in
steel works like
position
heavy iron
grills, Trusses,
Stanchions,
Heavy Beams
and Girders
erecting in
position and
fixing by using
Applicable
chain pulley 20% 20.40 4.08
Municipal
blocks, Area
Allowance
Derek pole
arrangements
and cranes etc.,
Applicable
complete in 13.615% 90.78 12.36
Overheads
position and
Contractor's
profit

Rate per 1 KG say 103.14

B MS Plate UNIT 1 Kg
Material Structural Steel 1.05 Kg 39.00 1 Kg 40.95
Plates
Man power TBSC-T.I-18 Labour charges 1 Kg 27.00 1 Kg 27.00
for fabricating
all structural
steel works like
heavy steel
works like
Trusses,
Stanchions,
Heavy Beams
and Girders
including cost
Man power TBSC-T.I-19 Labour
of welding charges 1 Kg 24.00 1 Kg 24.00
for
rods,erecting
power &
fixing
charges,all etc
structural
excluding cost
steel works
of fixing in like
heavy
position iron
grills, Trusses,
Stanchions,
Heavy Beams
and Girders
Applicable
erecting in 20% 20.40 4.08
Municipal
position and Area
Allowance
fixing by using
chain pulley
blocks,
Derek pole
Applicable 13.615% 96.03 13.07
arrangements
Overheads and
and cranes etc.,
Contractor's
complete
profit in
position

Rate per 1 KG say 109.10

96 of 171
92 Supply and fixing of roofing with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with
14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps
are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove, including overheads
and contractor's profit complete for finished item of work.

UNIT 1 Sqm
Material TBSC-R.I- Roofing: - 1 Sqm 725.00 1 Sqm 725.00
39 Roofing will be
provided with
0.5mm
thick
galvanized /
Applicable 13.615% 725.00 98.71
pre paintedand
Overheads G.I.
profiled sheets
Contractor's
fixed to the
profit
purlins with 14
size self drilling
screws
Rate per with
1 Sqm say 824.00
neoprene
washer. Side
93 Supply & fixing of Rolling laps are made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through
shutter
stitched
their entire length and jointed with at the ends by end-locks, mounted on specially designed pipe shaft of
together
50mm Diameter nominalself boretapping / pipe with brackets, plates, guide channels, stoppers, bottom locking
MS B class
plates and arrangements drilling screws.
for inside & outside locking with push-pull operations including cost of hood cover and
springs complete, paintedEnd with one coat of approved steel primer, locks, ball bearings, all accessories etc complete
for finished item of work laps
as perarespecial
to be Spec: 1108, including overheads and contractor's profit complete for
finished item of work. sealed with
25x3 mm Butyl
tape.
The sheets are
provided with UNIT 1 sqm
Material TBSC-E.I-01 anti capillary 1 sqm 3890.00 1 sqm 3890.00
grove.
Applicable 13.615% 3890.00 529.62
Overheads and
Contractor's
profit

Total 4419.62
Rate per 1 sqm Say 4420.00
97 BLD-CSTN- Damp proof course 50 mm thick with 1:2:4 cement concrete Nominal mix, using 12mm graded hard broken stone
3-21 aggregate including cost of all materials, conveyance charges of materials and cost of machinery, labour charges,
mixing, placing in position, leveling, vibrating, curing etc and overheads & contractors profit, complete for finished
item of work. (Using concrete mixer)

UNIT 20 sqm
Material Cement 43 Gr 320 Kg 4700.00 1000 Kg 1504.00
(including
loading
charges)

Cost of 12mm 0.9 cum 1203.91 1 cum 1083.52

graded metal
Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
Machinery CMC-016 Concrete mixer 1 Hour 152.5 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery
crew

Man power CMM-011 Mason Cl- I / 0.1 day 500 1 day 50.00
Brick layer Cl- I

CMM-087 Light mazdoor 1.98 day 445 1 day 881.10

97 of 171
 Applicable 20% 931.10 186.22
Municipal Area
Allowance

Applicable 13.615% 5579.88 759.70

Overheads and
Contractor's
profit

Total 6339.58
Rate per 1 Sqm say 317.00

98
Supplying, fabricating and fixing of MS angles 50x50x5mm over compound wall including cost and conveyance of all
materials to work site and all operational, incidental, labour charges etc. including overheads & contractors profit
complete for finished item of work.
UNIT 1 Kg
Material Lead Structural Steel 1 Kg 34.00 1 Kg 34.00
Angles/
Channels/
Beams

Man power TBSC-T.I-17 Labour charges 1 Kg 4.00 1 Kg 4.00

for fixing Iron
Doors, Iron
Windows and
Window Grills
in position

Applicable 20% 4.00 0.80

Municipal Area
Allowance

Applicable 13.615% 38.80 5.28

Overheads and
Contractor's
profit

Rate per 1 KG say 44.00

99

BLD-CSTN- Supplying and fixing galvanised steel Barbed wire conforming to IS 278 - 1978 weighing 9.38 kg per 100
15-7 metres(min.,), straining and fixing to any type of standard rails, straining bolts, including securing with and
provision of galvanised mild steel wire, staples or steel pins, etc., as directed (posts and struts of wood, concrete,
steel etc.,) including cost and conveyance of all materials to work site and all operational, incidental, labour charges
etc. including overheads & contractors profit complete for finished item of work.
UNIT 100 Rm
Supplying 9.38 Kg 90 1 Kg 844.2
Galvanized
Steel Barbed
wire
TBSC-E.II- conforming to
01 IS 278 - 1978 :
Type A - IOWA
Black
Type smith 75
first class as
Designation 0.15 day 500 1 day
per standard
Black smith 70.5
specification
second class 0.15 day 470 1 day
CMM-087 Light Mazdoor 0.30 day 445 1 day 133.50
Applicable 20% 279.00 55.80
Municipal Area
Allowance

Water charges 1% 1179.00 11.79

98 of 171
 Applicable 13.615% 1190.79 162.13
Overheads and
Contractor's
profit

Add LS for pins 100.00

and binding
wire
Rate per 100 1452.92
Rm say
Rate per 1 Rm say 14.53

100

Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre-painted steel as per IS
513 of-0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead
glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon
receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed
to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch
complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer
frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section)
outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x
3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section
UNIT 1 sqm
TBSC-M.III-
02 1 sqm 4725 1 sqm 4725
Applicable 13.615% 4725.00 643.31
Overheads and
Contractor's
profit

Rate per 1 Sqm say 5368.00

101

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly
manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2
and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer
frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x 2.40 mm for
openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized
up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash
shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash &
Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no’s of 3D Hinges for
each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost
and conveyance of all materials, accessories, labour charges for transportation, erection at site and overheads &
contractors profit, etc. complete for finished item of work.
UNIT 1 Sqm
TBSC-L.III-
12 1 Sqm 7989 1 sqm 7989
Applicable 13.615% 7989.00 1087.70
Overheads and
Contractor's
profit

Rate per 1 Sqm say 9077.00

102

Supplying and fixing of curtain Glazing made of pre painted steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 Primer coated with epoxy, finish painted with a polyester paint using the section for outer
frame of 46 x 52 mm, section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and the glazing with
5 mm thick plain float glass fitted with EPDM gaskets including handle made of high grade Aluminium powder
coated and nylon receiver, corner brackets made of CRCA with zinc hosphating, mullion caps made of Glass filled
nylon including fixing the frames in the concrete / masonry wall with self expanding screws, overheads &
contractor's profit, etc., complete for finished item.- Fixed Glazing 3'-0 x 3'-0 (914.4x914.4mm) and Fixed Glazing 3'-
0 x 4'-0 (914.4x1219.2mm)

99 of 171
 UNIT 1 Sqm
TBSC-N.I-
02 1 Sqm 5089 1 Sqm 5089
Applicable 13.615% 5089.00 692.87
Overheads and
Contractor's
profit

Rate per 1 Sqm say 5782.00

102
Providing wooden panelling 12 mm thick prelaminated particle board fixed on wooden frame of BT wood size 50.8
mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x
12.7 mm) size BT wood ornamental cover beading and necessary screws, synthetic glue and overheads and
contractors profit, etc. complete for finished item of work.
UNIT 1 Sqm
TBSC-K.III- 1.00 Sqm 1642.00 1.00 Sqm 1642.00
01
Applicable 13.615% 1642.00 223.56
Overheads and
Contractor's
profit

Rate per 1 Sqm say 1866.00

105 Supplying and fixing 14 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board /
Tegular/ Micro look Edge14 mm
tiles - a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%,
with
Thermal Conductivity λ =Mineral
0.052 toFibre
0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI
wall angle of size 25 mmsheet
x 25 600mm xx of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/
600suspending
partition at 610 mm c/c and of the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm)
Board
from soffit at 1220 mm c/c fixed/ with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to
Tegular
the GI T section with 4 mm dia GIEdge
Rod with galvanised spring steel level clip of PVC unversal holding clips system at
1200 mm c/c and fixing the
tiles14mm
with Mineral
a Fibre Sheet of size 600 x 600 mm in position and finishing two coats of
drywall topcoat includingHumidity
overheads & contractors profit, etc. complete for finished item of work.
Resistance of
90% RH,
Average NRC
0.50, Light
Reflectance UNIT 1 Sqm
Material TBSC-K.I- >80%, 1 sqm 535 1 sqm 535
05 Thermal
Conductivity λ
= 0.052 to
0.057 w/mk,
Fire
Performance
Class 0/Class
1
TBSC-K.II- G.I.-Precoated 0.4 Rmt 38 1 Rmt 15.2
05 Fine line Grid
25 mm x 25
mm x 0.7 mm

TBSC-K.II- Polyester 1.6 Rmt 45 1 Rmt 72

09 painted GI - T
Section - 24 x
32 mm

TBSC-K.II- Polyester 1.6 Rmt 42 1 Rmt 67.2

11 painted GI - T
Section - 24
mm x 27 mm

TBSC-K.II- Rawl Plug 1.28 No 3 1 No 3.84

15
TBSC-K.II- 2 mm Dia GI 1.28 No 10 1 No 12.8
24 Connecting Rod

100 of 171
Machinery TBSC-S.I-02 Power Saw 0.32 Hour 130 1 Hour 41.6
Cutter - Hand
Operated - Hire
charges

Machinery TBSC-S.I-03 Power Drill - 0.32 Hour 121 1 Hour 38.72

Hand Operated
- Hire Charges

Man power CMM-004 Carpenter Cl- I 0.12 day 565 1 day 67.8
Man power CMM-046 Carpenter Cl- 0.12 day 450 1 day 54
II / Erector
shuttering
Man power CMM-035 Painter Cl- I 0.024 day 570.00 1 day 13.68
CMM-079 Painter Cl- II 0.024 day 470.00 1 day 11.28
CMM-026 Operator 0.012 day 500 1 day 6
Bending /
Planing
machine

CMM-026 Operator 0.012 day 500 1 day 6

Bending /
Planing
machine

CMM-087 Light mazdoor 0.072 day 445 1 day 32.04

Applicable 20% 190.8 38.16
Municipal Area
Allowance

Add Scaffolding 1% 1015.32 10.15

charges 1%

Applicable 13.615% 1025.47 139.62

Overheads and
Contractor's
profit

Total 1165.09
Rate per 1 Sqm Say 1165

101 of 171
106 BLD-CSTN- Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum)
10-31 using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20
mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at
610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from
soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion
fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm)
fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge
Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape
to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall
topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd
specification.

UNIT 1 Sqm
Material TBSC-K.I- Gypsum Board 1.03 sqm 225 1 sqm 231.75
03 Plain sheet
12.5 mm thick
as per IS 2095
-1993

TBSC-K.II- G.I. Ceiling 0.64 Rmt 67 1 Rmt 42.88

01 Angle - 25 mm
x 10 mm x 0.55
mm

TBSC-K.II- G.I. Ceiling 0.84 Rmt 78 1 Rmt 65.52

02 Section 51.5
mm x 26 mm x
10.5 mm x 0.55
mm thick

TBSC-K.II- G.I. 0.84 Rmt 77 1 Rmt 64.68

03 Intermediate
Section 45 mm
x 15 mm x 15
mm x 0.9 mm

TBSC-K.II- G.I. Perimeter 0.4 Rmt 67 1 Rmt 26.8

04 Channel - 20
mm x 27 mm x
30 mm (web)
of 0.55 mm
thick

TBSC-K.II- Connecting 1.84 No 3 1 No 5.52

14 Clips
TBSC-K.II- Rawl Plug 0.64 No 3 1 No 1.92
15
TBSC-K.II- Soffit Cleats 0.64 No 3 1 No 1.92
17
TBSC-K.II- Drywall Screws 18 No 3 1 No 54
18 - 25 mm

TBSC-K.II- Jointing 0.55 Kg 27 1 Kg 14.85

19 Compound
TBSC-K.II- Jointing Paper 1.46 Rmt 5 1 Rmt 7.3
20 Tape
TBSC-K.II- Drywall Top 0.15 Ltr 129 1 Ltr 19.35
21 Coat
Machinery TBSC-S.I-02 Power Saw 0.32 Hour 130 1 Hour 41.6
Cutter - Hand
Operated - Hire
charges

Machinery TBSC-S.I-03 Power Drill - 0.64 Hour 121 1 Hour 77.44

Hand Operated
- Hire Charges

Man power CMM-004 Carpenter Cl- I 0.12 day 590 1 day 70.8

102 of 171
 Man power CMM-046 Carpenter Cl- 0.12 day 450 1 day 54
II / Erector
shuttering
Man power CMM-035 Painter Cl- I 0.024 day 570.00 1 day 13.68
CMM-079 Painter Cl- II 0.024 day 470.00 1 day 11.28
CMM-026 Operator 0.012 day 500 1 day 6
Bending /
Planing
machine

CMM-026 Operator 0.024 day 500 1 day 12

Bending /
Planing
machine

CMM-087 Light mazdoor 0.072 day 445 1 day 32.04

Applicable 20% 199.8 39.96
Municipal Area
Allowance

Add Scaffolding 1% 895.29 8.95

charges 1%

Applicable 13.615% 904.24 123.11

Overheads and
Contractor's
profit

Total 1027.35
Rate per 1 Sqm Say 1027

107 Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting, placing in
position, including cost and conveyance of all materials to work site and all operational, incidental, labour charges
including cost of overheads & contractors profit complete for finished item of work for purlins of sheet roofing.

1.05 KG 61.00 1.00 KG 64.05

Mild Steel
Tubes & pipes
of all Diameters
as per
TBSC-E.I-15 IS-1161
13.615% 64.05 8.72

Applicable
Overheads and
Contractors
Profit
72.77
Rate per 1 KG Say 73.00

103 of 171
405

104 of 171
232

105 of 171
1572.75

2472.75

106 of 171
107 of 171
108 of 171
109 of 171
57.6

110 of 171
Completed upto here 16-
12-2017

111 of 171
1 BLD-CSTN- Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop
5-4 (Cement:sand) using Bricks second class of size (Non-Modular or traditional size) 23 x 11 x 7 cm from approved
source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of al
materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges but including al
incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per SS
504.

Thickness 0.23 UNIT 1 Cum

Material BLC-023 Cost of 512 Nos 6147.54 1000 Nos

Bricks 2nd
Class :
Non-
modular
(including
loading
charges)

Material BLC-001 Cement 43 36 Kg 4700.00 1000 Kg

Gr
(including
loading
charges)

BLC-008 Cost of 0.2 cum 3324.53 1 cum

Sand
Man power CMM-011 Mason Cl- I 0.24 day 500.00 1 day
/ Brick
layer Cl- I
CMM-077 Mason Cl- 0.56 day 470.00 1 day
ll / Brick
layer Cl-II
CMM-087 Light 1.89 day 445.00 1 day
mazdoor
Applicable 20% 1224.25
Municipal
Area
Allowance

Total
Rate per 1 cum Say
Rate for Ground (F1) 1st (F2) 2nd (F3)
other
Floors
Rate as 5450.75 5450.75 5450.75
worked out
above
Scafolding 44.87 44.87 44.87
Charges
Hire
Scafolding 362.74 519.43 676.04
Charges
Labour
 Applicable 72.55 103.89 135.21
Municipal
Area
Allowance

Lift charges 0 12.24 24.48

Applicable 0 2.45 4.9

Municipal
Area
Allowance

Applicable 807.49 835.09 862.68

Overheads
and
Contractor'
s profit

Rate per 6738.4 6968.72 7198.93

cum
Say 6738 6969 7199
2 BLD-CSTN- Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Brick
5-12 second class or ground moulded (Non-Modular or traditional size) of size 23 x 11 x 7 cm from approved source
having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in
every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls whereve
applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding
cost of seigniorage charges on all materials, but including cost of scaffolding charges and all labour charges like
mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost o
steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

UNIT 10 Sqm
Material BLC-023 Cost of 589 Nos 6147.54 1000 Nos
Bricks 2nd
Class :
Non-
modular
(including
loading
charges)

Material BLC-001 Cement 43 55.2 Kg 4700.00 1000 Kg

Gr
(including
loading
charges)

BLC-008 Cost of 0.23 cum 3324.53 1 cum

Sand
Man power CMM-011 Mason Cl- I 0.6 day 500.00 1 day
/ Brick
layer Cl- I
CMM-077 Mason Cl- 0.6 day 470.00 1 day
ll / Brick
layer Cl-II
CMM-087 Light 2.75 day 445.00 1 day
mazdoor
Applicable 40% 1805.75
Municipal
Area
Allowance

Total
Rate per 1 Sqm Say
Rate for Ground (F1) 1st (F2) 2nd (F3)
other
Floors
Rate as 717.3 717.3 717.3
worked out
above
Scafolding 10.32 10.32 10.32
Charges
Hire
Scafolding 83.43 119.47 155.49
Charges
Labour
Applicable 16.69 23.89 31.1
Municipal
Area
Allowance

Lift charges 0 11.72 23.44

Applicable 0 4.69 9.38

Municipal
Area
Allowance

Applicable 112.7 120.82 128.94

Overheads
and
Contractor'
s profit

Rate per 940.44 1008.21 1075.97

1Sqm
Say 940 1008 1076
 r panel walls in super structure, parapet walls with cement mortar (1:8) prop
ond class of size (Non-Modular or traditional size) 23 x 11 x 7 cm from approved
g strength of not less than 3.5 N/sq.mm. including cost and conveyance of all
ricks, water etc., to site, excluding seigniorage charges but including all
abour charges like mixing cement mortar, scaffolding charges, constructing
erheads & contractors profit etc., complete for finished item of work as per SS

3147.54

169.2

664.91

120

263.2

841.05

244.85

5450.75
5451
3rd (F4)

5450.75

44.87

832.74
 166.55

36.72

7.34

890.28

7429.25

7429
partition walls (115 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks
d (Non-Modular or traditional size) of size 23 x 11 x 7 cm from approved source
gth of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in
of the reinforcement pegged into mortar joints of main brick walls wherever
nveyance of all materials like cement, sand, bricks, water etc., to site, excluding
all materials, but including cost of scaffolding charges and all labour charges like
es, curing, overheads & contractors profit etc., complete but excluding cost of
for finished item of work (APSS No. 509 & 501)

3620.9

259.44

764.64

300.00

282.00

1223.75

722.30

7173.03
717.3
3rd (F4)

717.3

10.32

191.53

38.31

35.16

14.06

137.06

1143.74

1144
 CONCRETE ITEMS FOR UNSUPPORTED HEIGHT OF 3.66 M IN STEEL SCAFFOLDING
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% 40mm Aggregate 958.91
profit
Cement content for Design mix 350 20mm Aggregate (Graded) 1312.91
M20- M25- M30- Sand for concrete 3134.53
350kg 380kg 400kg
INPUT FROM Current SoR
Light Mazdoor 445 Concrete mixer 300 / 200 ( diesel) 152.5
CMM-087 CMC-16
Mason Cl- II / Brick layer Cl- II 470 CREW -do- 260
CMM-035

Mason Cl- I / Brick layer Cl- 500 Batching plant 0.5 cum 241.4
I(CMM-011) CMC-009

Water Charges For Rural =Rs 77 98 CREW -do- 389.3

for Municipal=Rs.103
Needle vibrator 40 mm ( petrol ) 26.5
CMC-040
3.66 CREW -do- 187.2
1 Centering from SoR
2 Footing Bed Block Pedestal Plinth
3 Material 288 Material 64 Material 328 Material 1390
4 Labour 663 Labour 341 Labour 1054 Labour 1597
5 Steel centering & scaffold
6 Material Labour / floor -- 1st 2nd 3rd 4th 5th 6th 7th 8th
7 355.00 Column 2381.00 2620.00 2858.00 3095.00 3334.00 3572.00 3810.00 4049.00
8 1180.00 Lintel 1696.00 1866.00 2035.00 2204.00 2374.00 2543.00 2713.00 2883.00
9 233.00 Chajja 260.00 287.00 312.00 338.00 364.00 391.00 417.00 442.00
2085.00 Beam 1998.00 2198.00 2397.00 2598.00 2797.00 2997.00 3196.00 3396.00
10
236.00 Up to 226.00 249.00 271.00 294.00 316.00 339.00 361.00 384.00
150mm
11 slab
243.00 150 to 233.00 256.00 279.00 302.00 326.00 350.00 373.00 396.00
300mm
12 slab
254.00 Above 244.00 268.00 292.00 316.00 340.00 366.00 391.00 415.00
300mm
13 slab

14 472.00 RCC wall 1736.00 1909.00 2082.00 2255.00 2430.00 2603.00 2776.00 2951.00
1 BLD-CSTN- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed
3-4 using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and
Hand conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for laying concrete
Mix under foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 402): HAND MIXING

UNIT 1 CUM
Material BLC-001 Cement 162 Kg 4700.00 1000 Kg 761.40
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 2.36 day 445.00 1 day 1050.20
Applicable 20% 1100.20 220.04
Municipal Area
Allowance
Applicable 13.615% 4472.80 608.97
Overheads and
Contractor's
profit

Total 5081.77
Rate per 1 cum. Say 5082.00

2 BLD-CSTN- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed
3-5 using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and
Machine conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for machine mixing,
Mix laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING

UNIT 1 CUM
Material BLC-001 Cement 162 Kg 4700.00 1000 Kg 761.40
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1 Hour 152.50 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260.00 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 1.39 day 445.00 1 day 618.55
Applicable 20% 668.55 133.71
Municipal Area
Allowance
Applicable 13.615% 4419.32 601.69
Overheads and
Contractor's
profit

Total 5021.01
Rate per 1 cum. Say 5021.00
3 BLD-CSTN- Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring
3-6 bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost
Hand and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying
Mix concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads &
contractors profit etc., complete for finished item of work. (APSS No. 402) HAND MIXING

UNIT 1 CUM
Material BLC-001 Cement 129.6 Kg 4700.00 1000 Kg 609.12
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 2.36 day 445.00 1 day 1050.20
Applicable 20% 1100.20 220.04
Municipal Area
Allowance
Applicable 13.615% 4320.52 588.24
Overheads and
Contractor's
profit

Total 4908.76
Rate per 1 cum. Say 4909.00

4 BLD-CSTN- Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring
3-7 bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost
Machine and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying
Mix concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads &
contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

UNIT 1 CUM
Material BLC-001 Cement 129.6 Kg 4700.00 1000 Kg 609.12
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1 Hour 152.50 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260.00 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 1.39 day 445.00 1 day 618.55
Applicable 20% 668.55 133.71
Municipal Area
Allowance
Applicable 13.615% 4267.04 580.96
Overheads and
Contractor's
profit Total 4848.00
 Rate per 1 cum. Say 4848.00

5 BLD-CSTN- Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse
3-10 aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)
Hand from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
Mix aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of
overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND
MIXING

UNIT 1 CUM
A BED BLOCKS
Material BLC-001 Cement 220 Kg 4700.00 1000 Kg 1034.00
BLC-014 Cost of 20mm 0.9 cum 1312.91 1 cum 1181.62
graded
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 2.36 day 445.00 1 day 1050.20
Applicable 20% 1100.20 220.04
Municipal Area
Allowance
Total 5064.00
Rate per 1 cum. Say 5064.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5064.00 5064.00 5064.00 5064.00
out above
Centering Hire 64.00 64.00 64.00 64.00
charges
Centering labour 341.00 375.10 409.20 443.30

Applicable 68.20 75.02 81.84 88.66

Municipal Area
Allowance
Lift charges 0.00 110.02 220.04 330.06
Applicable 0.00 22.00 44.01 66.01
Municipal Area
Allowance

Applicable 753.89 777.44 800.98 824.53

Overheads and
Contractor's
profit

Rate per cum 6291.09 6487.58 6684.07 6880.56

Say 6291.00 6488.00 6684.00 6881.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5064.00 5064.00 5064.00 5064.00
out above
Centering Hire 64.00 64.00 64.00 64.00
charges
Centering labour 477.40 511.50 545.60 579.70

Applicable 95.48 102.30 109.12 115.94

Municipal Area
Allowance

Lift charges 440.08 550.10 660.12 770.14

 Applicable 88.02 110.02 132.02 154.03
Municipal Area
Allowance

Applicable 848.08 871.62 895.17 918.71

Overheads and
Contractor's
profit

Rate per cum 7077.06 7273.54 7470.03 7666.52

Say 7077.00 7274.00 7470.00 7667.00

6 BLD-CSTN- Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size graded machine
3-12 crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of
13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour
charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for
finished item of work, for:-Machine Mix-PCC : M-15 MACHINE MIX

UNIT 1 CUM
Material BLC-001 Cement 275 Kg 4700.00 1000 Kg 1292.50
BLC-014 Cost of 20mm 0.9 cum 1312.91 1 cum 1181.62
Graded
Aggregate
BLC-008 Cost of Sand 0.48 cum 3134.53 1 cum 1504.57
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1 Hour 152.50 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260.00 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 1.39 day 445.00 1 day 618.55
Applicable 20% 668.55 133.71
Municipal Area
Allowance
Total 5363.05
Rate per 1 cum. Say 5363.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5363.05 5363.05 5363.05 5363.05
out above
Lift charges 0 92.86 185.72 278.58
Applicable 0.00 18.57 37.14 55.72
Municipal Area
Allowance
Applicable 730.18 745.35 760.52 775.69
Overheads and
Contractor's
profit

Rate per cum 6093.23 6219.83 6346.43 6473.04

Say 6093.00 6220.00 6346.00 6473.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5363.05 5363.05 5363.05 5363.05
out above
Lift charges 371.44 464.3 557.16 650.02
 Applicable 74.29 92.86 111.43 130.00
Municipal Area
Allowance
Applicable 790.87 806.04 821.21 836.38
Overheads and
Contractor's
profit

Rate per cum 6599.65 6726.25 6852.85 6979.45

Say 6600.00 6726.00 6853.00 6979.00

7 BLD-CSTN- Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate
3-11 machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of
13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour
charges such as mixing, laying concrete, curing etc., complete for finished item of work, for:-Machine Mix-PCC : M-20
NOMINAL MIX. FOR BED OF SUMP AND SEPTIC TANK.

UNIT 1 CUM
Material BLC-001 Cement 330 Kg 4700.00 1000 Kg 1551.00
BLC-014 Cost of 20mm 0.9 cum 1312.91 1 cum 1181.62
Graded graded
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1 Hour 152.50 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260.00 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 1.39 day 445.00 1 day 618.55
Applicable 20% 668.55 133.71
Municipal Area
Allowance
Sub-Total 5527.52
Applicable 13.615% 5527.52 752.57
Overheads and
Contractor's
profit

Total 6280.09
Rate per 1 cum. Say 6280.00
8 BLD-CSTN- Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate
3-11 machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of
13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour
charges such as mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING &
SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC :
M-20 NOMINAL MIX Centering with Steel up to 3.66M. FOR STEPS.

UNIT 1 CUM
Material BLC-001 Cement 330 Kg 4700.00 1000 Kg 1551.00
BLC-014 Cost of 20mm 0.9 cum 1312.91 1 cum 1181.62
Graded graded
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1 Hour 152.50 1 Hour 152.50
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1 Hour 260.00 1 Hour 260.00
300 / 200
( diesel)
Municipal Area 20% 260.00 52.00
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.1 day 500.00 1 day 50.00
Brick layer Cl- I
CMM-087 Light mazdoor 1.39 day 445.00 1 day 618.55
Applicable 20% 668.55 133.71
Municipal Area
Allowance
Sub-Total 5527.52
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 5527.52 5527.52 5527.52 5527.52
out above
Centering Hire 288.00 288.00 288.00 288.00
charges
Centering labour 663.00 729.30 795.60 861.90

Applicable 132.60 145.86 159.12 172.38

Municipal Area
Allowance
Lift charges 0.00 92.86 185.72 278.58
Applicable 0.00 18.57 37.14 55.72
Municipal Area
Allowance
Applicable 900.10 926.11 952.11 978.12
Overheads and
Contractor's
profit

Rate per cum 7511.22 7728.22 7945.21 8162.22

Say 7511.00 7728.00 7945.00 8162.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 5527.52 5527.52 5527.52 5527.52
out above
Centering Hire 288.00 288.00 288.00 288.00
charges
Centering labour 928.20 994.50 1060.80 1127.10

Applicable 185.64 198.90 212.16 225.42

Municipal Area
Allowance
Lift charges 371.44 464.30 557.16 650.02
Applicable 74.29 92.86 111.43 130.00
Municipal Area
Allowance
Applicable 1004.12 1030.12 1056.13 1082.13
Overheads and
Contractor's
profit

Rate per cum 8379.21 8596.20 8813.20 9030.19

Say 8379.00 8596.00 8813.00 9030.00
8 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-14.A kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets,
steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS, PEDESTALS, PLINTH BEAMS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-009 Batching plant 1.333 Hour 241.40 1 Hour 321.79
0.5 cum
Hire CMC-041 Needle vibrator 1.333 Hour 26.50 1 Hour 35.32
40 mm ( petrol )
Crew CMC-009 Batching plant 1.333 Hour 389.30 1 Hour 518.94
0.5 cum
" CMC-041 Needle vibrator 1.333 Hour 187.20 1 Hour 249.54
40 mm ( petrol )
Municipal Area 20% 768.48 153.70
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.133 day 500.00 1 day 66.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.267 day 470.00 1 day 125.49
Brick layer Cl-II
CMM-087 Light mazdoor 4.6 day 445.00 1 day 2047.00
Applicable 20% 2238.99 447.80
Municipal Area
Allowance
Basic cost Total 8032.82
Rate per 1 cum. Say 8033.00
A FOOTINGS
Rate as worked 1 cum 8032.82 1 cum 8032.82
out
Centering Hire 1 cum 288.00 1 cum 288.00
charges
Centering labour 1 cum 663.00 1 cum 663.00

Applicable 20% 663.00 132.60

Municipal Area
Allowance
Applicable 13.615% 9116.42 1241.20
Overheads and
Contractor's
profit

Total 10357.62
Rate per 1 cum. Say 10358.00
B PEDESTALS
Rate as worked 1 cum 8032.82 1 cum 8032.82
out
Centering Hire 1 cum 328.00 1 cum 328.00
charges
Centering labour 1 cum 1054.00 1 cum 1054.00
 Applicable 20% 1054.00 210.80
Municipal Area
Allowance
Applicable 13.615% 9625.62 1310.53
Overheads and
Contractor's
profit

Total 10936.15
Rate per 1 cum. Say 10936.00
C PLINTH BEAMS
Rate as worked 1 cum 8032.82 1 cum 8032.82
out
Centering Hire 1 cum 1390.00 1 cum 1390.00
charges
Centering labour 1 cum 1597.00 1 cum 1597.00

Applicable 20% 1597.00 319.40

Municipal Area
Allowance
Applicable 13.615% 11339.22 1543.83
Municipal Area
Allowance
Total 12883.05
Rate per 1 cum. Say 12883.00
D STEPS
Rate as worked 1 cum 8032.82 1 cum 8032.82
out
Total 8032.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8032.82 8032.82 8032.82 8032.82
out above
Centering Hire 288.00 288.00 288.00 288.00
charges
Centering labour 663.00 729.30 795.60 861.90

Applicable 132.60 145.86 159.12 172.38

Municipal Area
Allowance
Lift charges 0 300.75 601.50 902.25
Applicable 0.00 60.15 120.30 180.45
Municipal Area
Allowance
Applicable 1241.20 1301.17 1361.14 1421.11
Overheads and
Contractor's
profit

Rate per cum 10357.62 10858.05 11358.48 11858.91

Say 10358.00 10858.00 11358.00 11859.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7rd (F8)
Floors
Rate as worked 8032.82 8032.82 8032.82 8032.82
out above
Centering Hire 288.00 288.00 288.00 288.00
charges
Centering labour 928.20 994.50 1060.80 1127.10

Applicable 185.64 198.90 212.16 1127.10

Municipal Area
Allowance
Lift charges 1203 1503.75 1804.50 2105.25
 Applicable 240.60 300.75 360.90 421.05
Municipal Area
Allowance
Applicable 1481.08 1541.04 1601.01 1783.74
Overheads and
Contractor's
profit

Rate per cum 12359.34 12859.76 13360.19 14885.06

Say 12359.00 12860.00 13360.00 14885.00

9 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-15.B kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets,
steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC
WALLS in BUILDINGS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60

Machinery CMC-009 Batching plant 1.333 Hour 241.40 1 Hour 321.79

0.5 cum
Hire CMC-041 Needle vibrator 1.333 Hour 26.50 1 Hour 35.32
40 mm ( petrol )
Crew CMC-009 Batching plant 1.333 Hour 389.30 1 Hour 518.94
0.5 cum
" CMC-041 Needle vibrator 1.333 Hour 187.20 1 Hour 249.54
40 mm ( petrol )
Municipal Area 20% 768.48 153.70
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.167 day 500.00 1 day 83.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.167 day 470.00 1 day 78.49
Brick layer Cl-II
CMM-087 Light mazdoor 5.6 day 445.00 1 day 2492.00
Applicable 20% 2653.99 530.80
Municipal Area
Allowance
Basic cost Total 8530.82
Rate per 1 cum. Say 8531.00
A 3.66M Height COLUMNS
Rate as worked 1 cum 8530.82 1 cum 8530.82
out
Total 8530.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 355 355 355 355
charges
Centering labour 2381 2620 2858 3095
 Applicable 476.20 524.00 571.60 619.00
Municipal Area
Allowance
Lift charges 0 342.25 684.50 1026.75
Applicable 0.00 68.45 136.90 205.35
Municipal Area
Allowance
Applicable 1598.81 1693.78 1788.58 1883.22
Overheads and
Contractor's
profit

Rate per cum 13341.83 14134.30 14925.40 15715.14

Say 13342.00 14134.00 14925.00 15715.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 355 355 355 355
charges
Centering labour 3334 3572 3810 4049

Applicable 666.80 714.40 762.00 809.80

Municipal Area
Allowance
Lift charges 1369 1711.25 2053.50 2395.75
Applicable 273.80 342.25 410.70 479.15
Municipal Area
Allowance
Applicable 1978.18 2072.98 2167.78 2262.75
Overheads and
Contractor's
profit

Rate per cum 16507.60 17298.70 18089.80 18882.27

Say 16508.00 17299.00 18090.00 18882.00
ii 3.66M Height LINTELS
Rate as worked 1 cum 8530.82 1 cum 8530.82
out
Total 8530.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 1180 1180 1180 1180
charges
Centering labour 1696 1866 2035 2204

Applicable 339.20 373.20 407.00 440.80

Municipal Area
Allowance
Lift charges 0 342.25 684.50 1026.75
Applicable 0.00 68.45 136.90 205.35
Municipal Area
Allowance
Applicable 1599.22 1682.91 1766.44 1849.97
Overheads and
Contractor's
profit

Rate per cum 13345.24 14043.63 14740.66 15437.69

Say 13345.00 14044.00 14741.00 15438.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 1180 1180 1180 1180
charges
 Centering labour 2374 2543 2713 2883

Applicable 474.80 508.60 542.60 576.60

Municipal Area
Allowance
Lift charges 1369 1711.25 2053.50 2395.75
Applicable 273.80 342.25 410.70 479.15
Municipal Area
Allowance
Applicable 1933.66 2017.19 2100.88 2184.57
Overheads and
Contractor's
profit

Rate per cum 16136.08 16833.11 17531.50 18229.89

Say 16136.00 16833.00 17532.00 18230.00
D RCC Wall 150 mm Thick
Rate as worked 0.15 cum 8530.82 1 cum 1279.62
out
Total 1279.62
Rate per sqm Say 1280.00
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1279.62 1279.62 1279.62 1279.62
out above
Centering Hire 472.00 472.00 472.00 472.00
charges
Centering labour 1736 1909 2082 2255

Applicable 347.20 381.80 416.40 451.00

Municipal Area
Allowance
Lift charges 0 51.34 102.68 154.02
Applicable 0.00 10.27 20.54 30.80
Municipal Area
Allowance
Applicable 522.11 558.76 595.42 632.07
Overheads and
Contractor's
profit

Rate per sqm 4356.93 4662.79 4968.66 5274.51

Say 4357.00 4663.00 4969.00 5275.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1279.62 1279.62 1279.62 1279.62
out above
Centering Hire 472.00 472.00 472.00 472.00
charges
Centering labour 2430 2603 2776 2951

Applicable 486.00 520.60 555.20 590.20

Municipal Area
Allowance
Lift charges 205.36 256.7 308.04 359.38
Applicable 41.07 51.34 61.61 71.88
Municipal Area
Allowance
Applicable 669.05 705.70 742.35 779.33
Overheads and
Contractor's
profit

Rate per sqm 5583.10 5888.96 6194.82 6503.41

Say 5583.00 5889.00 6195.00 6503.00
10 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-16 C kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets,
steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-009 Batching plant 0.308 Hour 241.40 1 Hour 74.35
0.5 cum
Hire CMC-042 Needle vibrator 0.308 Hour 26.50 1 Hour 8.16
40 mm (petrol )
Crew CMC-009 Batching plant 0.308 Hour 389.30 1 Hour 119.90
0.5 cum
" CMC-042 Needle vibrator 0.308 Hour 187.20 1 Hour 57.66
40 mm (petrol )
Municipal Area 20% 177.56 1 35.51
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.067 day 500.00 1 day 33.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.133 day 470.00 1 day 62.51
Brick layer Cl-II
CMM-087 Light mazdoor 3.077 day 445.00 1 day 1369.27
Applicable 20% 1465.28 1 293.06
Municipal Area
Allowance
Basic cost 6120.66
A 3.66M Height BEAMS
Rate as worked 1 cum 6120.66 1 cum 6120.66
out
Total 6120.66
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 2085 2085 2085 2085
charges
Centering labour 1998 2198 2397 2598

Applicable 399.60 439.60 479.40 519.60

Municipal Area
Allowance
Lift charges 0.00 164.28 328.56 492.84
Applicable 0.00 32.86 65.71 98.57
Municipal Area
Allowance
Applicable 1443.63 1503.15 1562.50 1622.18
Overheads and
Contractor's
profit

Rate per cum 12046.89 12543.55 13038.83 13536.85

Say 12047.00 12544.00 13039.00 13537.00
 Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 2085.00 2085 2085 2085
charges
Centering labour 2797 2997 3196 3396

Applicable 559.40 599.40 639.20 679.20

Municipal Area
Allowance
Lift charges 657.12 821.40 985.68 1149.96
Applicable 131.42 164.28 197.14 229.99
Municipal Area
Allowance
Applicable 1681.53 1741.05 1800.40 1859.92
Overheads and
Contractor's
profit

Rate per cum 14032.13 14528.79 15024.08 15520.73

Say 14032.00 14529.00 15024.00 15521.00

B 3.66M Height SLAB 175 mm Thick

Rate as worked 1.75 cum 6120.66 1 cum 10711.16
out
Rate per 1 sqm 1071.12
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1071.12 1071.12 1071.12 1071.12
out above
Centering Hire 243.00 243.00 243.00 243.00
charges
Centering labour 233.00 256.00 279.00 302.00

Applicable 46.60 51.20 55.80 60.40

Municipal Area
Allowance
Lift charges 0.00 28.75 57.50 86.25
Applicable 0.00 5.75 11.50 17.25
Municipal Area
Allowance
Applicable 216.98 225.44 233.89 242.35
Overheads and
Contractor's
profit

Rate per 1 Sqm 1810.70 1881.26 1951.81 2022.37

Say 1811.00 1881.00 1952.00 2022.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1071.12 1071.12 1071.12 1071.12
out above
Centering Hire 243.00 243.00 243.00 243.00
charges
Centering labour 326.00 350.00 373.00 396.00

Applicable 65.20 70.00 74.60 79.20

Municipal Area
Allowance
Lift charges 115.00 143.75 172.50 201.25
Applicable 23.00 28.75 34.50 40.25
Municipal Area
Allowance
 Applicable 250.97 259.59 268.04 276.50
Overheads and
Contractor's
profit

Rate per 1 Sqm 2094.29 2166.21 2236.76 2307.32

Say 2094.00 2166.00 2237.00 2307.00
B 3.66M Height SLAB 175 mm Thick
Rate as worked 1.75 cum 6120.66 1 cum 10711.16
out
Rate per 1 sqm 1071.12
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 1071.12 1071.12 1071.12 1071.12
out above
Centering Hire 243.00 243.00 243.00 243.00
charges
Centering labour 233.00 256.00 279.00 302.00

Applicable 46.60 51.20 55.80 60.40

Municipal Area
Allowance
Lift charges 0.00 28.75 57.50 86.25
Applicable 0.00 5.75 11.50 17.25
Municipal Area
Allowance
Applicable 216.98 225.44 233.89 242.35
Overheads and
Contractor's
profit

Rate per 1 Sqm 1810.70 1881.26 1951.81 2022.37

Say 1811.00 1881.00 1952.00 2022.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 1071.12 1071.12 1071.12 1071.12
out above
Centering Hire 243.00 243.00 243.00 243.00
charges
Centering labour 326.00 350.00 373.00 396.00

Applicable 65.20 70.00 74.60 79.20

Municipal Area
Allowance
Lift charges 115.00 143.75 172.50 201.25
Applicable 23.00 28.75 34.50 40.25
Municipal Area
Allowance
Applicable 250.97 259.59 268.04 276.50
Overheads and
Contractor's
profit

Rate per 1 Sqm 2094.29 2166.21 2236.76 2307.32

Say 2094.00 2166.00 2237.00 2307.00
B 3.66M Height SLAB 50 mm Thick
Rate as worked 0.5 cum 6120.66 1 cum 3060.33
out
Rate per 1 sqm 306.03
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 306.03 306.03 306.03 306.03
out above
Centering Hire 236.00 236.00 236.00 236.00
charges
 Centering labour 226.00 249.00 271.00 294.00

Applicable 45.20 49.80 54.20 58.80

Municipal Area
Allowance
Lift charges 0.00 8.21 16.42 24.63
Applicable 0.00 1.64 3.28 4.93
Municipal Area
Allowance
Applicable 110.72 115.82 120.76 125.86
Overheads and
Contractor's
profit

Rate per 1 Sqm 923.95 966.50 1007.69 1050.25

Say 924.00 967.00 1008.00 1050.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 306.03 306.03 306.03 306.03
out above
Centering Hire 236.00 236.00 236.00 236.00
charges
Centering labour 316.00 339.00 361.00 384.00

Applicable 63.20 67.80 72.20 76.80

Municipal Area
Allowance
Lift charges 32.84 41.05 49.26 57.47
Applicable 6.57 8.21 9.85 11.49
Municipal Area
Allowance
Applicable 130.79 135.89 140.83 145.92
Overheads and
Contractor's
profit

Rate per 1 Sqm 1091.43 1133.98 1175.17 1217.71

Say 1091.00 1134.00 1175.00 1218.00

11 BLD-CSTN- Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of
3-13:31 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm
and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates,
brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end
with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching,
machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but
excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903)
& 903)

CHAJJAS/SUNSH
ADES
UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81

M-189 Water 1.2 KL 98.00 1 KL 117.60

Machinery CMC-009 Batching plant 0.308 Hour 241.40 1 Hour 74.35
0.5 cum
Hire CMC-042 Needle vibrator 0.308 Hour 26.50 1 Hour 8.16
40 mm (petrol )
Crew CMC-009 Batching plant 0.308 Hour 389.30 1 Hour 119.90
0.5 cum
" CMC-042 Needle vibrator 0.308 Hour 187.20 1 Hour 57.66
40 mm (petrol )
Municipal Area 20% 177.56 1 35.51
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.067 day 500.00 1 day 33.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.133 day 470.00 1 day 62.51
Brick layer Cl-II
CMM-087 Light mazdoor 3.077 day 445.00 1 day 1369.27
Applicable 20% 1465.28 1 293.06
Municipal Area
Allowance
Basic cost Rate per 1 cum. 6120.66
6121.00
0.6 m wide Chajja / Sunshade
Rate as worked 0.0625 cum 6120.66 1 cum 382.54
out
Rate per 1 sqm 382.54
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 382.54 382.54 382.54 382.54
out above
Centering Hire 233.00 233.00 233.00 233.00
charges
Centering labour 260.00 287.00 312.00 338.00

Applicable 52.00 57.40 62.40 67.60

Municipal Area
Allowance
Lift charges 0.00 10.27 20.54 30.81
Applicable 0.00 2.05 4.11 6.16
Municipal Area
Allowance
Applicable 126.28 132.37 138.14 144.06
Overheads and
Contractor's
profit

Rate per 1 Sqm 1053.82 1104.63 1152.73 1202.17

Say 1054.00 1105.00 1153.00 1202.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 382.54 382.54 382.54 382.54
out above
Centering Hire 233.00 233.00 233.00 233.00
charges
Centering labour 364.00 391.00 417.00 442.00

Applicable 72.80 78.20 83.40 88.40

Municipal Area
Allowance
Lift charges 41.08 51.35 61.62 71.89
Applicable 8.22 10.27 12.32 14.38
Municipal Area
Allowance
Applicable 149.99 156.08 162.00 167.77
Overheads and
Contractor's
profit

Rate per 1 Sqm 1251.63 1302.44 1351.88 1399.98

Say 1252.00 1302.00 1352.00 1400.00
12 BLD-CSTN- Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for Dummy
3-7 columns using 40mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all
Machine materials like cement, sand, coarse aggregate, water etc. to site, machine mixing, vibrating, lifting concrete
Mix mechanically, laying concrete, curing , overheads & contractors profit, centering using Steel scaffolding pipes, jack
Props, wallers, Foot plates, brackets, steel Centering Plates, etc. including all operational, incidental and labour
charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work upto un
supported height up to 3.66 m for dummy columns (APSS No. 402)

UNIT 1 CUM
Material BLC-001 Cement 129.6 Kg 4700.00 1000 Kg 609.12
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1.333 Hour 152.50 1 Hour 203.28
300 / 200
( diesel)
Crew CMC-016 Concrete mixer 1.333 Hour 260.00 1 Hour 346.58
300 / 200
( diesel)
Needle vibrator 1.333 hour 26.50 1 hour 35.32
40mm ( petrol )
Crew charges 1.333 hour 187.20 1 hour 249.54
Applicable 20% 596.12 119.22
Municipal Area
Allowance
Man power CMM-011 Mason Cl- I / 0.167 day 500.00 1 day 83.50
Brick layer Cl- I
Mason Cl- I I/ 0.167 day 470.00 1 day 78.49
Brick layer Cl- II
CMM-087 Light mazdoor 5.6 day 445.00 1 day 2492.00
Applicable 20% 2653.99 530.80
Municipal Area
Allowance
Total 7139.01
i 3.66M Height DUMMY
COLUMNS
Rate for other 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 7139.01 7139.01 7139.01
out above
Centering Hire 355 355 355
charges
Centering labour 2620 2858 3095

Applicable 524.00 571.60 619.00

Municipal Area
Allowance
Lift charges 325.01 650.02 975.03
Applicable 65.00 130.00 195.01
Municipal Area
Allowance
Applicable 1501.46 1593.45 1685.27
Overheads and
Contractor's
profit

Rate per cum 12529.48 13297.08 14063.32

Say 12529.00 13297.00 14063.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 7139.01 7139.01 7139.01 7139.01
out above
Centering Hire 355.00 355 355 355
charges
Centering labour 3334.00 3572 3810 4049

Applicable 666.80 714.40 762.00 809.80

Municipal Area
Allowance
Lift charges 1300.04 1625.05 1950.06 2275.07
Applicable 260.01 325.01 390.01 455.01
Municipal Area
Allowance
Applicable 1777.42 1869.40 1961.39 2053.54
Overheads and
Contractor's
profit

Rate per cum 14832.28 15599.87 16367.47 17136.43

Say 14832.00 15600.00 16367.00 17136.00
0.0888

0
0
0
1
 CONCRETE ITEMS FOR UNSUPPORTED HEIGHT OF 4.27 M IN STEEL SCAFFOLDING
NOTE: This Sheet must be used for Beams, Columns and Slabs for the above unsupported height in the Ground Floor
ONLY.
Unsupported Height of 4.27 M
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% 40mm Aggregate 958.91
profit
Cement content for Design mix 350 20mm Aggregate (Graded) 1312.91
M20- M25- M30- Sand for concrete 3134.53
350kg 380kg 400kg
INPUT FROM Current SoR
Light Mazdoor 445 Concrete mixer 300 / 200 ( diesel) 152.5
CMM-087 CMC-16
Mason Cl- II / Brick layer Cl- II 470 CREW -do- 260
CMM-035

Mason Cl- I / Brick layer Cl- 500 Batching plant 0.5 cum 241.4
I(CMM-011) CMC-009

Water Charges For Rural =Rs 77 98 CREW -do- 389.3

for Municipal=Rs.103
Needle vibrator 40 mm ( petrol ) 26.5
CMC-040
CREW -do- 187.2
1 Centering from SoR
2 Footing Bed Block Pedestal Plinth
3 Material 288 Material 64 Material 328 Material 1390
4 Labour 663 Labour 341 Labour 1054 Labour 1597
5 Steel centering & scaffold
6 Material Labour / floor -- 1st 2nd 3rd 4th 5th 6th 7th 8th
7 414.16 Column 2777.82 3056.65 3334.31 3610.81 3889.64 4167.31 4444.97 4723.81
8 1376.66 Lintel 1978.66 2176.99 2374.15 2571.32 2769.65 2966.82 3165.15 3363.48
9 271.83 Chajja 303.33 334.83 364.00 394.33 424.66 456.16 486.50 515.66
2432.49 Beam 2330.99 2564.32 2796.48 3030.98 3263.15 3496.48 3728.65 3961.98
10
275.33 Up to 263.67 290.50 316.16 343.00 368.66 395.50 421.16 448.00
150mm
11 slab
283.50 150 to 271.83 298.66 325.50 352.33 380.33 408.33 435.16 462.00
300mm
12 slab
296.33 Above 284.67 312.66 340.66 368.66 396.66 427.00 456.16 484.16
300mm
13 slab

14 550.66 RCC wall 2025.32 2227.15 2428.99 2630.82 2834.98 3036.82 3238.65 3442.81
1 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-15.B kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates,
brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching,
machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS,
RCC WALLS in BUILDINGS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60

Machinery CMC-009 Batching plant 1.333 Hour 241.40 1 Hour 321.79

0.5 cum
Hire CMC-041 Needle vibrator 1.333 Hour 26.50 1 Hour 35.32
40 mm ( petrol )
Crew CMC-009 Batching plant 1.333 Hour 389.30 1 Hour 518.94
0.5 cum
" CMC-041 Needle vibrator 1.333 Hour 187.20 1 Hour 249.54
40 mm ( petrol )
Municipal Area 20% 768.48 153.70
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.167 day 500.00 1 day 83.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.167 day 470.00 1 day 78.49
Brick layer Cl-II
CMM-087 Light mazdoor 5.6 day 445.00 1 day 2492.00
Applicable 20% 2653.99 530.80
Municipal Area
Allowance
Basic cost Total 8530.82
Rate per 1 cum. Say 8531.00
A 3.66M Height COLUMNS
Rate as worked 1 cum 8530.82 1 cum 8530.82
out
Total 8530.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 414.16 414.16 414.16 414.16
charges
Centering labour 2777.82 3056.65 3334.31 3610.81

Applicable 555.56 611.33 666.86 722.16

Municipal Area
Allowance
Lift charges 0.00 342.25 684.50 1026.75
Applicable 0.00 68.45 136.90 205.35
Municipal Area
Allowance
Applicable 1671.70 1773.17 1874.45 1975.54
Overheads and
Contractor's
profit

Rate per cum 13950.06 14796.83 15642.00 16485.59

 Say 13950.00 14797.00 15642.00 16486.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 414.16 414.16 414.16 414.16
charges
Centering labour 3889.64 4167.31 4444.97 4723.81

Applicable 777.93 833.46 888.99 944.76

Municipal Area
Allowance
Lift charges 1369 1711.25 2053.50 2395.75
Applicable 273.80 342.25 410.70 479.15
Municipal Area
Allowance
Applicable 2077.02 2178.30 2279.58 2381.05
Overheads and
Contractor's
profit

Rate per cum 17332.37 18177.55 19022.72 19869.50

Say 17332.00 18178.00 19023.00 19870.00
2 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-16 C kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets,
steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-009 Batching plant 0.308 Hour 241.40 1 Hour 74.35
0.5 cum
Hire CMC-042 Needle vibrator 0.308 Hour 26.50 1 Hour 8.16
40 mm (petrol )
Crew CMC-009 Batching plant 0.308 Hour 389.30 1 Hour 119.90
0.5 cum
" CMC-042 Needle vibrator 0.308 Hour 187.20 1 Hour 57.66
40 mm (petrol )
Municipal Area 20% 177.56 1 35.51
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.067 day 500.00 1 day 33.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.133 day 470.00 1 day 62.51
Brick layer Cl-II
CMM-087 Light mazdoor 3.077 day 445.00 1 day 1369.27
Applicable 20% 1465.28 1 293.06
Municipal Area
Allowance
Basic cost 6120.66
A 3.66M Height BEAMS
Rate as worked 1 cum 6120.66 1 cum 6120.66
out
Total 6120.66
 Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 2432.49 2432.49 2432.49 2432.49
charges
Centering labour 2330.99 2564.32 2796.48 3030.98

Applicable 466.20 512.86 559.30 606.20

Municipal Area
Allowance
Lift charges 0.00 164.28 328.56 492.84
Applicable 0.00 32.86 65.71 98.57
Municipal Area
Allowance
Applicable 1545.35 1610.31 1675.08 1740.23
Overheads and
Contractor's
profit

Rate per cum 12895.69 13437.78 13978.28 14521.97

Say 12896.00 13438.00 13978.00 14522.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 2432.49 2432.49 2432.49 2432.49
charges
Centering labour 3263.15 3496.48 3728.65 3961.98

Applicable 652.63 699.30 745.73 792.40

Municipal Area
Allowance
Lift charges 657.12 821.40 985.68 1149.96
Applicable 131.42 164.28 197.14 229.99
Municipal Area
Allowance
Applicable 1805.00 1869.97 1934.74 1999.70
Overheads and
Contractor's
profit

Rate per cum 15062.47 15604.58 16145.09 16687.18

Say 15062.00 15605.00 16145.00 16687.00

B 3.66M Height SLAB 150 mm Thick

Rate as worked 1.5 cum 6120.66 1 cum 9180.99
out
Rate per 1 sqm 918.10
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 918.10 918.10 918.10 918.10
out above
Centering Hire 275.33 275.33 275.33 275.33
charges
Centering labour 263.67 290.50 316.16 343.00

Applicable 52.73 58.10 63.23 68.60

Municipal Area
Allowance
Lift charges 0.00 24.64 49.28 73.92
Applicable 0.00 4.93 9.86 14.78
Municipal Area
Allowance
Applicable 205.56 213.97 222.19 230.60
Overheads and
Contractor's
profit

Rate per 1 Sqm 1715.39 1785.57 1854.15 1924.33

Say 1715.00 1786.00 1854.00 1924.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 918.10 918.10 918.10 918.10
out above
Centering Hire 275.33 275.33 275.33 275.33
charges
Centering labour 368.66 395.50 421.16 448.00

Applicable 73.73 79.10 84.23 89.60

Municipal Area
Allowance
Lift charges 98.56 123.20 147.84 172.48
Applicable 19.71 24.64 29.57 34.50
Municipal Area
Allowance
Applicable 238.82 247.23 255.45 263.86
Overheads and
Contractor's
profit

Rate per 1 Sqm 1992.91 2063.10 2131.68 2201.87

Say 1993.00 2063.00 2132.00 2202.00
 0.0888

0.61
1
0.16666
1.16666
 CONCRETE ITEMS FOR UNSUPPORTED HEIGHT OF 3.66 M IN WOODEN SCAFFOLDING
INPUT INPUT FROM LEAD
Municipal Area Allowance 20% CEMENT 4700.00
Overheads and Contractor's 13.615% 40mm Aggregate 958.91
profit
Cement content for Design mix 350 20mm Aggregate (Graded) 1312.91
M20- M25- M30- Sand for concrete 3134.53
350kg 380kg 400kg
INPUT FROM Current SoR
Light Mazdoor 445 Concrete mixer 300 / 200 ( diesel) 152.5
CMM-087 CMC-16
Mason Cl- II / Brick layer Cl- II 470 CREW -do- 260
CMM-035

Mason Cl- I / Brick layer Cl- 500 Batching plant 0.5 cum 241.4
I(CMM-011) CMC-009

Water Charges For Rural =Rs 77 98 CREW -do- 389.3

for Municipal=Rs.103
Needle vibrator 40 mm ( petrol ) 26.5
CMC-040
CREW -do- 187.2
1 Centering from SoR
2 Footing Bed Block Pedestal Plinth
3 Material 288 Material 64 Material 328 Material 1390
4 Labour 663 Labour 341 Labour 1054 Labour 1597
5 Wooden centering & scaffold
6 Material Labour / floor -- 1st 2nd 3rd 4th 5th 6th 7th 8th
7 238 Column 1845 2029 2213 2398 2582 2768 2952 3135
8 790 Lintel 1314 1445 1575 1706 1838 1970 2101 2232
9 156 Chajja 202 222 243 263 282 303 323 343
1395 Beam 1547 1701 1856 2011 2165 2321 2475 2629
10
158 Up to 175 193 211 228 246 264 280 298
150mm
11 slab
163 150 to 181 198 217 235 254 271 289 308
300mm
12 slab
170 Above 189 207 226 245 264 284 302 321
300mm
13 slab
9 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-15.B kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials, but
including centering using Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges
for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS in BUILDINGS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60

Machinery CMC-009 Batching plant 1.333 Hour 241.40 1 Hour 321.79

0.5 cum
Hire CMC-041 Needle vibrator 1.333 Hour 26.50 1 Hour 35.32
40 mm ( petrol )
Crew CMC-009 Batching plant 1.333 Hour 389.30 1 Hour 518.94
0.5 cum
" CMC-041 Needle vibrator 1.333 Hour 187.20 1 Hour 249.54
40 mm ( petrol )
Municipal Area 20% 768.48 153.70
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.167 day 500.00 1 day 83.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.167 day 470.00 1 day 78.49
Brick layer Cl-II
CMM-087 Light mazdoor 5.6 day 445.00 1 day 2492.00
Applicable 20% 2653.99 530.80
Municipal Area
Allowance
Basic cost Total 8530.82
Rate per 1 cum. Say 8531.00
A 3.66M Height COLUMNS
Rate as worked 1 cum 8530.82 1 cum 8530.82
out
Total 8530.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 238 238 238 238
charges
Centering labour 1845 2029 2213 2398

Applicable 369.00 405.80 442.60 479.60

Municipal Area
Allowance
Lift charges 0 342.25 684.50 1026.75
Applicable 0.00 68.45 136.90 205.35
Municipal Area
Allowance
Applicable 1495.31 1581.29 1667.27 1753.41
Overheads and
Contractor's
profit
 Rate per cum 12478.13 13195.61 13913.09 14631.93
Say 12478.00 13196.00 13913.00 14632.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 238 238 238 238
charges
Centering labour 2582 2768 2952 3135

Applicable 516.40 553.60 590.40 627.00

Municipal Area
Allowance
Lift charges 1369 1711.25 2053.50 2395.75
Applicable 273.80 342.25 410.70 479.15
Municipal Area
Allowance
Applicable 1839.39 1925.69 2011.67 2097.49
Overheads and
Contractor's
profit

Rate per cum 15349.41 16069.61 16787.09 17503.21

Say 15349.00 16070.00 16787.00 17503.00
ii 3.66M Height LINTELS
Rate as worked 1 cum 8530.82 1 cum 8530.82
out
Total 8530.82
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 790 790 790 790
charges
Centering labour 1314 1445 1575 1706

Applicable 262.80 289.00 315.00 341.20

Municipal Area
Allowance
Lift charges 0 342.25 684.50 1026.75
Applicable 0.00 68.45 136.90 205.35
Municipal Area
Allowance
Applicable 1483.71 1561.03 1638.19 1715.51
Overheads and
Contractor's
profit

Rate per cum 12381.33 13026.55 13670.41 14315.63

Say 12381.00 13027.00 13670.00 14316.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 8530.82 8530.82 8530.82 8530.82
out above
Centering Hire 790 790 790 790
charges
Centering labour 1838 1970 2101 2232

Applicable 367.60 394.00 420.20 446.40

Municipal Area
Allowance
Lift charges 1369 1711.25 2053.50 2395.75
Applicable 273.80 342.25 410.70 479.15
Municipal Area
Allowance
 Applicable 1792.99 1870.47 1947.79 2025.11
Overheads and
Contractor's
profit

Rate per cum 14962.21 15608.79 16254.01 16899.23

Say 14962.00 15609.00 16254.00 16899.00

10 BLD-CSTN- Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350
3-16 C kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and
10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials but
including centering using Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges
for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.

UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-009 Batching plant 0.308 Hour 241.40 1 Hour 74.35
0.5 cum
Hire CMC-042 Needle vibrator 0.308 Hour 26.50 1 Hour 8.16
40 mm (petrol )
Crew CMC-009 Batching plant 0.308 Hour 389.30 1 Hour 119.90
0.5 cum
" CMC-042 Needle vibrator 0.308 Hour 187.20 1 Hour 57.66
40 mm (petrol )
Municipal Area 20% 177.56 1 35.51
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.067 day 500.00 1 day 33.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.133 day 470.00 1 day 62.51
Brick layer Cl-II
CMM-087 Light mazdoor 3.077 day 445.00 1 day 1369.27
Applicable 20% 1465.28 1 293.06
Municipal Area
Allowance
Basic cost 6120.66
A 3.66M Height BEAMS
Rate as worked 1 cum 6120.66 1 cum 6120.66
out
Total 6120.66
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 1395 1395 1395 1395
charges
Centering labour 1547 1701 1856 2011

Applicable 309.40 340.20 371.20 402.20

Municipal Area
Allowance
Lift charges 0.00 164.28 328.56 492.84
 Applicable 0.00 32.86 65.71 98.57
Municipal Area
Allowance
Applicable 1276.01 1328.01 1380.17 1432.33
Overheads and
Contractor's
profit

Rate per cum 10648.07 11082.01 11517.30 11952.60

Say 10648.00 11082.00 11517.00 11953.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 6120.66 6120.66 6120.66 6120.66
out above
Centering Hire 1395.00 1395 1395 1395
charges
Centering labour 2165 2321 2475 2629

Applicable 433.00 464.20 495.00 525.80

Municipal Area
Allowance
Lift charges 657.12 821.40 985.68 1149.96
Applicable 131.42 164.28 197.14 229.99
Municipal Area
Allowance
Applicable 1484.33 1536.66 1588.66 1640.66
Overheads and
Contractor's
profit

Rate per cum 12386.53 12823.20 13257.14 13691.07

Say 12387.00 12823.00 13257.00 13691.00

B 3.66M Height SLAB 125 mm Thick

Rate as worked 1.25 cum 6120.66 1 cum 7650.83
out
Rate per 1 sqm 765.08
Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 765.08 765.08 765.08 765.08
out above
Centering Hire 158.00 158.00 158.00 158.00
charges
Centering labour 175.00 193.00 211.00 228.00

Applicable 35.00 38.60 42.20 45.60

Municipal Area
Allowance
Lift charges 0.00 20.54 41.08 61.62
Applicable 0.00 4.11 8.22 12.32
Municipal Area
Allowance
Applicable 154.27 160.57 166.86 172.99
Overheads and
Contractor's
profit

Rate per 1 Sqm 1287.35 1339.90 1392.44 1443.61

Say 1287.00 1340.00 1392.00 1444.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 765.08 765.08 765.08 765.08
out above
Centering Hire 158.00 158.00 158.00 158.00
charges
 Centering labour 246.00 264.00 280.00 298.00

Applicable 49.20 52.80 56.00 59.60

Municipal Area
Allowance
Lift charges 82.16 102.70 123.24 143.78
Applicable 16.43 20.54 24.65 28.76
Municipal Area
Allowance
Applicable 179.29 185.59 191.56 197.86
Overheads and
Contractor's
profit

Rate per 1 Sqm 1496.16 1548.71 1598.53 1651.08

Say 1496.00 1549.00 1599.00 1651.00

11 BLD-CSTN- Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of
3-13:31 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite
metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm
and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials but
including centering using Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, etc., for
60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm
including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete,
laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its
fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) & 903)

CHAJJAS/SUNSH
ADES
UNIT 1 CUM
Material BLC-001 Cement 350 Kg 4700.00 1000 Kg 1645.00
Cost of 20mm 0.8 cum 1312.91 1 cum 1050.33
Graded metal
BLC-008 Cost of Sand 0.4 cum 3134.53 1 cum 1253.81

M-189 Water 1.2 KL 98.00 1 KL 117.60

Machinery CMC-009 Batching plant 0.308 Hour 241.40 1 Hour 74.35
0.5 cum
Hire CMC-042 Needle vibrator 0.308 Hour 26.50 1 Hour 8.16
40 mm (petrol )
Crew CMC-009 Batching plant 0.308 Hour 389.30 1 Hour 119.90
0.5 cum
" CMC-042 Needle vibrator 0.308 Hour 187.20 1 Hour 57.66
40 mm (petrol )
Municipal Area 20% 177.56 1 35.51
Allowance
applicable on
Machinery crew

Man power CMM-011 Mason Cl- I / 0.067 day 500.00 1 day 33.50
Brick layer Cl- I
CMM-077 Mason Cl- ll / 0.133 day 470.00 1 day 62.51
Brick layer Cl-II
CMM-087 Light mazdoor 3.077 day 445.00 1 day 1369.27
Applicable 20% 1465.28 1 293.06
Municipal Area
Allowance
Basic cost Rate per 1 cum. 6120.66
6121.00
0.6 m wide Chajja / Sunshade
Rate as worked 0.0625 cum 6120.66 1 cum 382.54
out
Rate per 1 sqm 382.54
 Rate for other Ground (F1) 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 382.54 382.54 382.54 382.54
out above
Centering Hire 156.00 156.00 156.00 156.00
charges
Centering labour 202.00 222.00 243.00 263.00

Applicable 40.40 44.40 48.60 52.60

Municipal Area
Allowance
Lift charges 0.00 10.27 20.54 30.81
Applicable 0.00 2.05 4.11 6.16
Municipal Area
Allowance
Applicable 106.32 111.27 116.38 121.32
Overheads and
Contractor's
profit

Rate per 1 Sqm 887.26 928.53 971.17 1012.43

Say 887.00 929.00 971.00 1012.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 382.54 382.54 382.54 382.54
out above
Centering Hire 156.00 156.00 156.00 156.00
charges
Centering labour 282.00 303.00 323.00 343.00

Applicable 56.40 60.60 64.60 68.60

Municipal Area
Allowance
Lift charges 41.08 51.35 61.62 71.89
Applicable 8.22 10.27 12.32 14.38
Municipal Area
Allowance
Applicable 126.11 131.22 136.16 141.11
Overheads and
Contractor's
profit

Rate per 1 Sqm 1052.35 1094.98 1136.24 1177.52

Say 1052.00 1095.00 1136.00 1178.00

12 BLD-CSTN- Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for Dummy
3-7 columns using 40mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all
Machine materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on
Mix all materials but including machine mixing, vibrating, lifting concrete mechanically, laying concrete, curing ,
overheads & contractors profit, centering using Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts,
Wall Plates, etc. including all operational, incidental and labour charges etc., complete but excluding cost of steel and
its fabrication charges for finished item of work upto un supported height up to 3.66 m for dummy columns (APSS
No. 402)

UNIT 1 CUM
Material BLC-001 Cement 129.6 Kg 4700.00 1000 Kg 609.12
BLC-015 Cost of 40mm 0.9 cum 958.91 1 cum 863.02
Nominal
Aggregate
BLC-008 Cost of Sand 0.45 cum 3134.53 1 cum 1410.54
M-189 Water 1.2 KL 98.00 1 KL 117.60
Machinery CMC-016 Concrete mixer 1.333 Hour 152.50 1 Hour 203.28
300 / 200
( diesel)
 Crew CMC-016 Concrete mixer 1.333 Hour 260.00 1 Hour 346.58
300 / 200
( diesel)
Needle vibrator 1.333 hour 26.50 1 hour 35.32
40mm ( petrol )
Crew charges 1.333 hour 187.20 1 hour 249.54
Applicable 20% 596.12 119.22
Municipal Area
Allowance
Man power CMM-011 Mason Cl- I / 0.167 day 500.00 1 day 83.50
Brick layer Cl- I
Mason Cl- I I/ 0.167 day 470.00 1 day 78.49
Brick layer Cl- II
CMM-087 Light mazdoor 5.6 day 445.00 1 day 2492.00
Applicable 20% 2653.99 530.80
Municipal Area
Allowance
Total 7139.01
i 3.66M Height DUMMY
COLUMNS
Rate for other 1st (F2) 2nd (F3) 3rd (F4)
Floors
Rate as worked 7139.01 7139.01 7139.01
out above
Centering Hire 238 238 238
charges
Centering labour 2029 2213 2398

Applicable 405.80 442.60 479.60

Municipal Area
Allowance
Lift charges 325.01 650.02 975.03
Applicable 65.00 130.00 195.01
Municipal Area
Allowance
Applicable 1388.98 1472.14 1555.47
Overheads and
Contractor's
profit

Rate per cum 11590.80 12284.77 12980.12

Say 11591.00 12285.00 12980.00
Rate for other 4th (F5) 5th (F6) 6th (F7) 7th (F8)
Floors
Rate as worked 7139.01 7139.01 7139.01 7139.01
out above
Centering Hire 238.00 238 238 238
charges
Centering labour 2582.00 2768 2952 3135

Applicable 516.40 553.60 590.40 627.00

Municipal Area
Allowance
Lift charges 1300.04 1625.05 1950.06 2275.07
Applicable 260.01 325.01 390.01 455.01
Municipal Area
Allowance
Applicable 1638.63 1722.12 1805.28 1888.28
Overheads and
Contractor's
profit

Rate per cum 13674.09 14370.79 15064.76 15757.37

Say 13674.00 14371.00 15065.00 15757.00
0.0888
 TBSC-L.II-05 30mm both side commercial 1192
INPUT
Municipal Area Allowance 20% TBSC-L.II-06 35mm both side commercial 1349

Overheads and Contractor's profit 13.615% TBSC-L.II-10 30mm one side commercial & 2046
teak veneer

TBSC-L.II-11 35mm one side commercial & 2231

teak veneer

TBSC-L.II-2 30mm both side teak veneer 1817

TBSC-L.II-3 35mm both side teak veneer 1984

TBSC-L.I-01 CRCA frame 343

INPUT FROM Current SOR
Sal Wood scantlings: any length 44785 TBSC-T.I-25 Fixing flush shutter 447
TBSC-D.V-01

Carpenter -I 590
Carpenter -II 470
light Mazdoor 445

1 TBSC-D.I-01 Medium Teak Wood scantlings: up to 2.0 M 1cum 72620

2 TBSC-D.I-02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1cum 80689
3 TBSC-D.I-03 Medium Teak Wood scantlings: above 3.0 M 1cum 88759
4 TBSC-D.I-04 Medium Teak Wood Plancks: any thickness 1cum 145240
TBSC-D.II-01 Best Teak Wood scantlings: up to 2.0 M
5 1cum 125068
TBSC-D.II-02 Best Teak Wood scantlings: 2.0 to 3.0 M
6 1cum 133137
TBSC-D.II-03 Best Teak Wood scantlings: above 3.0 M
7 1cum 141206
TBSC-D.II-04 Best Teak Wood Plancks: any thickness
8 1cum 157344
TBSC-D.III- Burma Teak Wood scantlings: up to 2.0 M
9 01 1cum 171857
TBSC-D.III- Burma Teak Wood scantlings: 2.0 to 3.0 M
10 02 1cum 176765
TBSC-D.III- Burma Teak Wood scantlings: above 3.0 M
11 03 1cum 185920
TBSC-D.III- Burma Teak Wood Plancks: any thickness
12 04 1cum 201319
TBSC-D.IV- Assam Teak Wood scantlings: any length
13 01 1cum 46071
TBSC-D.IV- Assam Teak Wood Plancks: any thickness
14 02 1cum 66803
TBSC-D.V-01 Sal Wood scantlings: any length
15 1cum 44785
TBSC-D.V-02 Sal Wood Plancks: any thickness
16 1cum 59715

1 TBSC-L.I-03 (PVC) Door Frame Rm 296

TBSC-L.III-01 30mm thick Solid panel PVC door shutter 2153
2 sqm
TBSC-L.III-02 30mm thick “RAJSHRI” or equivalent BRAND FACTORY MADE BOTHSIDE PRELAM SOLID 2460
PANEL PVC DOOR SHUTTER consisting of frame made out of MS.
3 Each
 TBSC-L.III-03 30mm thick “RAJSHRI” or equivalent BRAND FACTORY MADE SOLID SINGLE SIDE PRELAM 2233
PANEL PVC DOOR SHUTTER consisting of frame made out of MS
4 Each

1 TBSC-P.I-01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 161
2 TBSC-P.I-02 Brass Tower Bolt-10 mm Bolt (IS:204) 150 mm Long Each 236
3 TBSC-P.I-03 Brass Tower Bolt-10 mm Bolt (IS:204) 200 mm Long Each 315
4 TBSC-P.I-04 Brass Tower Bolt-10 mm Bolt (IS:204) 250 mm Long Each 391
5 TBSC-P.I-05 Brass Tower Bolt-10 mm Bolt (IS:204) 300 mm Long Each 481
6 TBSC-P.I-06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 44
7 TBSC-P.I-07 Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 52
8 TBSC-P.I-08 Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Long Each 66
9 TBSC-P.I-09 Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long Each 79
10 TBSC-P.I-10 Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long Each 96
11 TBSC-P.I-11 Aluminium Tower Bolt-10 mm Bolt (IS:204) 300 mm Long Each 109
12 TBSC-P.I-12 Aluminium Tower Bolt-10 mm Bolt (IS:204) 350 mm Long Each 288
13 TBSC-P.I-13 Aluminium Tower Bolt-10 mm Bolt (IS:204) 450 mm Long Each 376
14 TBSC-P.I-14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 24
15 TBSC-P.I-15 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 150 mm Long Each 35
16 TBSC-P.I-16 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 200 mm Long Each 52
17 TBSC-P.I-17 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 250 mm Long Each 68
18 TBSC-P.I-18 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 300 mm Long Each 85
TBSC-P.II-01 Brass Butt hinges (IS:205)- 75 mm Long
19 Each 66
TBSC-P.II-02 Brass Butt hinges (IS:205)- 100 mm Long
20 Each 218
TBSC-P.II-03 Brass Butt hinges (IS:205)- 125 mm Long
21 Each 264
TBSC-P.II-04 Brass Butt hinges (IS:205)- 150 mm Long
22 Each 348
TBSC-P.II-05 Aluminium Butt hinges (IS:205)- 75 mm Long
23 Each 49
TBSC-P.II-06 Aluminium Butt hinges (IS:205)- 100 mm Long
24 Each 64
TBSC-P.II-07 Aluminium Butt hinges (IS:205)- 125 mm Long
25 Each 77
TBSC-P.II-08 Aluminium Butt hinges (IS:205)- 150 mm Long
26 Each 93
TBSC-P.II-09 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long
27 Each 11
TBSC-P.II-10 MS-Powder Coated Butt hinges (IS:205)- 100 mm Long
28 Each 21
TBSC-P.II-11 MS-Powder Coated Butt hinges (IS:205)- 125 mm Long
29 Each 31
TBSC-P.II-12 MS-Powder Coated Butt hinges (IS:205)- 150 mm Long
30 Each 40
TBSC-P.III-01 Aluminium Door Handles (IS:208) 75 mm Long
31 Each 44
TBSC-P.III-02 Aluminium Door Handles (IS:208) 100 mm Long
32 Each 52
TBSC-P.III-03 Aluminium Door Handles (IS:208) 125 mm Long
33 Each 74
TBSC-P.III-04 Aluminium Door Handles (IS:208) 150 mm Long
34 Each 87
TBSC-P.III-05 MS-Powder Coated Door Handles (IS:208) 125 mm Long
35 Each 31
TBSC-P.III-06 MS-Powder Coated Door Handles (IS:208) 150 mm Long
36 Each 45
 TBSC-P.IV-01 Brass Aldrops (IS:2681) 300 mm long
37 Each 1164
TBSC-P.IV-02 Brass Aldrops (IS:2681) 350 mm long
38 Each 2243
TBSC-P.IV-03 Brass Aldrops (IS:2681) 450 mm long
39 Each 3194
TBSC-P.IV-04 Aluminium Aldrops (IS:2681) 200 mm long
40 Each 166
TBSC-P.IV-05 Aluminium Aldrops (IS:2681) 250 mm long
41 Each 192
TBSC-P.IV-06 Aluminium Aldrops (IS:2681) 300 mm long
42 Each 210
TBSC-P.IV-07 MS-Powder Coated Aldrops (IS:2681) 200 mm long
43 Each 105
TBSC-P.IV-08 MS-Powder Coated Aldrops (IS:2681) 250 mm long
44 Each 137
TBSC-P.IV-09 MS-Powder Coated Aldrops (IS:2681) 300 mm long
45 Each 164
TBSC-P.IX-01 Brass Door Stoppers
46 Each 180
TBSC-P.II-14 Brass Windows Stay
47 Each 203
48 TBSC-P.V-04 Aluminium Flat Latches: 200 mm long Each 96
49 TBSC-P.V-05 Aluminium Flat Latches: 250 mm long Each 105
50 TBSC-P.V-06 Aluminium Flat Latches: 300 mm long Each 114
51 TBSC-P.V-07 MS-Powder Coated Flat Latches: 250 mm long Each 53
52 TBSC-P.V-08 MS-Powder Coated Flat Latches: 300 mm long Each 66
TBSC-P.IX-02 MS-Powder Coated - Door Stoppers
53 Each 45
TBSC-P.IX-05 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated with PVC rings
54 Each 116
TBSC-P.IX-06 Supply & fixing drapery bracket - brass powder coated
55 Each 410
TBSC-P.II-13 Deluxe window stay Aluminium
56 Each 131
TBSC-P.IX-03 Heavy duty Aluminium Door stopper
57 Each 58
TBSC-P.III-07 Brass fancy handles 150 mm
58 Each 304
TBSC-P.III-08 Brass fancy handles 200 mm
59 Each 412
TBSC-P.III-09 Brass fancy handles 250 mm
60 Each 743
TBSC-P.III-10 Brass fancy handles 300 mm
61 Each 948
TBSC-P.III-11 Brass fancy handles 450 mm
62 Each 1483
63 TBSC-P.V-01 Brass latch heavy 300 mm Each 584
64 TBSC-P.V-02 Brass latch heavy 350 mm Each 672
65 TBSC-P.V-03 Brass latch heavy 450 mm Each 886

66 TBSC-P.IX-04 Rubber/ Nylon door stop bushes Each 10

67 TBSC-P.IX-08 MS Z Hold fasts - 300 mm long Each 32
68
 2019-20 DATA

1 BLD-CSTN- Supply and fixing Medium teak wood framed Double shutter door with flush shutter as per approved drawings with
13-16 Medium teakwood frame of size 115x65mm and Flush door shutters, solid bond wood block board type with teak ply
on both faces.: 35 mm thick conforming to IS:2202 as per drawing including cost of fixtures like 6 Nos MS-Z Hold
fasts-300 mm long of 40x40x5mm ISA, 6 Nos Brass Butt hinges (IS:205)- 125 mm Long, 2 No Brass Tower Bolt-10 mm
Bolt (IS:204) 300 mm Long, 2 No. Brass Aldrop (IS:2681) 350 mm long, 2 Nos. Brass fancy handles 300 mm , 2 No.
Brass Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of
screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc.,
including overheads and contractor profit etc., complete for finished item of work.

a DOUBLE SHUTTER UNIT 1.5 2.15 3.225 Sqm

Ventilator 1.5 0.45 0.675
3.900 Sqm
Material i Medium teak wood 5.20 Rmt
Frame (vertical)
(2x2.6)=4.3
Qty (frame size 100x65) 0.0340 cum

wastage 5% 0.002
2M to 3M A total 0.036 cum
Horizontal (1.5*2+2*.1) 3.2 Rmt
top
ii Qty (frame size 100x65) 0.0210 cum

wastage 5% 0.001
upto 2M B total 0.022 cum

TBSC-D.I- TOTAL 0.022 cum 72620.00 1 cum 1597.64

upto 2M 01
TBSC-D.I- TOTAL 0.036 cum 80689.00 1 cum 2904.80
2M to 3M 02
TBSC-L.II-3 Flush door shutters, solid 3.225 sqm 1984.00 1 sqm 6398.40
bond wood block board
type with teak ply on
both faces.: 35 mm thick
conforming to IS:2202

Fixtures TBSC-P.IV- Brass Aldrops (IS:2681) 1 No. 1164.00 1 No. 1164.00

01 300 mm long

TBSC-P.V- Brass latch heavy 300 1 No. 584.00 1 No. 584.00

01 mm

TBSC-P.I-04 Brass Tower Bolt-10 mm 2 No. 391.00 1 No. 782.00

Bolt (IS:204) 250 mm
Long

TBSC-P.III- Brass fancy handles 150 4 No. 304.00 1 No. 1216.00

07 mm

TBSC-P.IX- Brass Door Stoppers 2 No. 180.00 1 No. 360.00

01

TBSC-P.II- Brass Butt hinges 6 No. 348.00 1 No. 2088.00

04 (IS:205)- 150 mm Long
TBSC-P.IX- Rubber bush 2 No. 10.00 1 No. 20.00
04
 TBSC-P.IX- Hold fasts 6 No. 32.00 1 No. 192.00
08
Ventilator portion
Pin headed Glass 5 TBSC-F.II- (1.37*.32)*1.05 0.46 sqm 430.00 1 sqm 197.80
mm thick 02

MS Bars with frame

10mm square bars @ 2*1.05*1.37*0.785 kg/m 2.26 kg 33.00 1 kg 74.58

0.785kg/rm

frame of 15x5mm flat 2*1.05*(1.37+.32)*0.58 2.09 kg 33.00 1 kg 68.97

@ 0.589kg/rm 9kg/rm

for labour exculding 5% 4.143 kg

wastage
Man power TBSC-T.I-31 Labour charges for 3.225 sqm 765.00 1 sqm 2467.13
wrought and put up
including fixing in
position for Teak wood
Flush type door shutter
including frame

Man power TBSC-T.I-36 Labour charges for 0.675 sqm 398.00 1 sqm 268.65
wrought and put up
including fixing in
position for Teak wood
Ventilators glazed,
fixed with double frame
with wire netting
including
frame (50% rate)

Man power TBSC-T.I-16 Labour charges for 4.143 Kg 26 1 Kg 107.72

fabricating steel works
like Window Grills,
Compound Wall Grills,
Iron Doors, Windows
including cost of welding
rods, power charges,
excluding cost of fixing in
position

Man power TBSC-T.I-17 Labour charges for fixing 4.143 Kg 4 1 Kg 16.57

Iron Doors, Iron
Windows and Window
Grills in position

Applicable Municipal 20% 2860.07 572.01

Area Allowance
Applicable Overheads 13.615% 21080.27 2870.08
and Contractor's profit
Value Added Tax ( Works 0% 0.00
Contract Tax)
Total 23950.35
Rate per 1 Sqm Say 6141
2 BLD-CSTN- Supply and fixing double shutter door cum ventilator with Medium teak wood frame of size 100x65mm and Flush
13-16 door shutters, solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 as
per drawing including cost of fixtures like 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, 6 Nos Brass Butt
hinges (IS:205)- 125 mm Long, 2 No Brass Tower Bolt-10 mm (IS:204) 250 mm Long, 1 No. Brass latch heavy 300 mm
long, 1 No. Brass Aldrop (IS:2681) 300 mm long, 2 Nos. Brass fancy handles 150 mm long , 2 No. Brass Door
Stoppers, 2 Nos.Rubber/ Nylon door stop bushes, 2 no.s of 5mm pin headed glass and 2nos MS 10mm square bars in
the ventilator portion including fixing the fixtures to door with required no. of screws, bolts and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads and contractor profit
etc., complete for finished item of work.
a DOUBLE SHUTTER UNIT 1.5 2.15 3.225 Sqm
Ventilator 1.5 0.45 0.675
3.900 Sqm
Material i Medium teak wood 5.2 Rmt
Frame (vertical)
(2x2.6)=4.3
Qty (frame size 100x65) 0.0340 cum

wastage 5% 0.002
2M to 3M A total 0.036 cum
Horizontal (1.5*2+2*.1) 3.2 Rmt
top
ii Qty (frame size 100x65) 0.0210 cum

wastage 5% 0.001
upto 2M B total 0.022 cum

TBSC-D.I- TOTAL 0.022 cum 72620.00 1 cum 1597.64

upto 2M 01
TBSC-D.I- TOTAL 0.036 cum 80689.00 1 cum 2904.80
2M to 3M 02
TBSC-L.II-3 Flush door shutters, solid 3.225 sqm 1984.00 1 sqm 6398.40
bond wood block board
type with teak ply on
both faces.: 35 mm thick
conforming to IS:2202

Fixtures TBSC-P.IV- Brass Aldrops (IS:2681) 1 No. 1164.00 1 No. 1164.00

01 300 mm long
TBSC-P.V- Brass latch heavy 300 1 No. 584.00 1 No. 584.00
01 mm
TBSC-P.I-04 Brass Tower Bolt-10 mm 2 No. 391.00 1 No. 782.00
Bolt (IS:204) 250 mm
Long
TBSC-P.III- Brass fancy handles 150 2 No. 304.00 1 No. 608.00
07 mm
TBSC-P.IX- Brass Door Stoppers 2 No. 180.00 1 No. 360.00
01
TBSC-P.II- Brass Butt hinges 6 No. 348.00 1 No. 2088.00
04 (IS:205)- 150 mm Long
TBSC-P.IX- Rubber bush 2 No. 10.00 1 No. 20.00
04
TBSC-P.IX- Hold fasts 6 No. 32.00 1 No. 192.00
08
Ventilator portion
Pin headed Glass 5 TBSC-F.II- 2*(1.37*.2)*1.1 0.6 sqm 430.00 1 sqm 258.00
mm thick 02

MS Bars with frame

10mm square bars @ 2*1.05*1.37*0.785 kg/m 2.26 kg 33.00 1 kg 74.58
0.785kg/rm
 Man power TBSC-T.I-31 Labour charges for 3.225 sqm 765.00 1 sqm 2467.13
wrought and put up
including fixing in
position for Teak wood
Flush type door shutter
including frame

Man power TBSC-T.I-36 Labour charges for 0.675 sqm 398.00 1 sqm 268.65
wrought and put up
including fixing in
position for Teak wood
Ventilators glazed,
fixed with double frame
with wire netting
including
frame (50% rate)

Applicable Municipal 20% 2735.78 547.16

Area Allowance
Applicable Overheads 13.615% 20314.36 2765.80
and Contractor's profit
Value Added Tax ( Works 0% 0.00
Contract Tax)
Total 23080.16
Rate per 1 Sqm Say 5918

3 BLD-CSTN- Supplying and fixing of Single shutter door with sal wood door frame of size 100x65mm and flush door shutters of
13-16 35mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 including
6 no.s MS Z Hold fasts - 300 mm long, cost of 1 no. Aluminium Aldrops (IS:2681) 300 mm long, 1 no. Aluminium Flat
Latches: 300 mm long, 1 no. Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 2 no.s Aluminium Door
Handles (IS:208) 150 mm Long, 3 no.s Aluminium Butt hinges (IS:205)- 125 mm Long, 1 no. Heavy duty Aluminium
Door stopper, 1 no. Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws,
bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads &
contractors profit etc., complete for finished item of work as per APSS 1001 & 1002

b SINGLE SHUTTER UNIT 0.915 2.15 1.967 Sqm

Material Sal wood Frame 5.215 Rmt
Horns 0.200 Rmt
total 5.415 Rmt
Frame (100x65 mm) 0.0350 cum
wastage 5% 0.002
TBSC-D.V- TOTAL 0.0370 cum 44785.00 1 cum 1657.05
01
1.1*(915- TBSC-L.II- Flush door shutters, solid 1.868 sqm 1349.00 1 sqm 2519.93
2*65+25)*(2150-65+12) 06 bond wood block board
type with commercial
ply ON BOTH face
commercial ply: 35
mmthick conforming to
IS:2202

Furniture TBSC-P.IV- Aluminium Aldrops 1 No. 210.00 1 No. 210.00

06 (IS:2681) 300 mm long
TBSC-P.V- Aluminium Flat Latches: 1 No. 114.00 1 No. 114.00
06 300 mm long
TBSC-P.I-10 Aluminium Tower Bolt- 1 No. 96.00 1 No. 96.00
10 mm Bolt (IS:204) 250
mm Long
TBSC-P.III- Aluminium Door 2 No. 87.00 1 No. 174.00
04 Handles (IS:208) 150 mm
Long
 TBSC-P.IX- Heavy duty Aluminium 1 No. 58.00 1 No. 58.00
03 Door stopper
TBSC-P.II- Aluminium Butt hinges 3 No. 77.00 1 No. 231.00
07 (IS:205)- 125 mm Long
TBSC-P.IX- Rubber/ Nylon door stop 1 No. 10 1 No. 10.00
04 bushes
TBSC-P.IX- MS Z Hold fasts - 300 6 No. 32.00 1 No. 192.00
08 mm long
Man TBSC-T.I-25 Labour charges for fixing 1.967 sqm 426 1 sqm 837.94
power Flush door shutters of
any thickness to the
existing door frame
including fixing the
fixtures to the door
shutter excluding cost of
shutter

Applicable Municipal 20% 837.94 167.59

Area Allowance

Applicable Overheads 13.615% 6267.51 853.32

and Contractor's profit

Total 7120.83
Rate per 1 Sqm Say 3620

4 BLD-CSTN- Supplying and fixing of Double shutter door with sal wood door frame of size 100x65mm and flush door shutters of
13-16 35mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 including 6
no.s MS Z Hold fasts - 300 mm long, cost of 1 no. Aluminium Aldrops (IS:2681) 300 mm long, 1 no. Aluminium Flat
Latches: 300 mm long, 2 no. Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 4 no.s Aluminium Door
Handles (IS:208) 150 mm Long, 6 no.s Aluminium Butt hinges (IS:205)- 125 mm Long, 2 no. Heavy duty Aluminium
Door stopper, 2 no. Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws,
bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads &
contractors profit etc., complete for finished item of work as per APSS 1001 & 1002

b DOUBLE SHUTTER UNIT 1.5 2.15 3.225 Sqm

Material Sal wood Frame 5.800 Rmt
Horns 0.200 Rmt
total 6.000 Rmt
Frame (100x65 mm) 0.0390 cum
wastage 5% 0.002
TBSC-D.V- TOTAL 0.0410 cum 44785.00 1 cum 1836.19
01
1.1*(1500- TBSC-L.II- Flush door shutters, solid 3.218 sqm 1349.00 1 sqm 4341.08
2*65+25)*(2150-65+12) 06 bond wood block board
type with commercial
ply ON BOTH face
commercial ply: 35
mmthick conforming to
IS:2202

Furniture TBSC-P.IV- Aluminium Aldrops 1 No. 210.00 1 No. 210.00

06 (IS:2681) 300 mm long
TBSC-P.V- Aluminium Flat Latches: 1 No. 114.00 1 No. 114.00
06 300 mm long
TBSC-P.I-10 Aluminium Tower Bolt- 2 No. 96.00 1 No. 192.00
10 mm Bolt (IS:204) 250
mm Long
 TBSC-P.III- Aluminium Door 4 No. 87.00 1 No. 348.00
04 Handles (IS:208) 150 mm
Long
TBSC-P.IX- Heavy duty Aluminium 2 No. 58.00 1 No. 116.00
03 Door stopper
TBSC-P.II- Aluminium Butt hinges 6 No. 77.00 1 No. 462.00
07 (IS:205)- 125 mm Long
TBSC-P.IX- Rubber/ Nylon door stop 2 No. 10 1 No. 20.00
04 bushes
TBSC-P.IX- MS Z Hold fasts - 300 6 No. 32.00 1 No. 192.00
08 mm long
Man TBSC-T.I-25 Labour charges for fixing 3.225 sqm 426 1 sqm 1373.85
power Flush door shutters of
any thickness to the
existing door frame
including fixing the
fixtures to the door
shutter excluding cost of
shutter

Applicable Municipal 20% 1373.85 274.77

Area Allowance

Applicable Overheads 13.615% 9479.89 1290.69

and Contractor's profit

Total 10770.58
Rate per 1 Sqm Say 3340
5 BLD-CSTN- Supplying and fixing of Double shutter door with Medium Teak wood door frame of size 100x65mm and flush door
13-16 shutters of 35mm thick solid bond wood block board type with Teak ply ON BOTH faces conforming to IS:2202
including 6 no.s MS Z Hold fasts - 300 mm long, cost of 1 no. Brass Aldrops (IS:2681) 300 mm long, 1 no. Brass Heavy
Duty Latches: 300 mm long, 2 no. Brass Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 4 no.s Brass Fancy Handles
(IS:208) 150 mm Long, 6 no.s Brass Butt hinges (IS:205)- 125 mm Long, 2 no. Heavy duty Brass Door stopper, 2 no.
Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads & contractors
profit etc., complete for finished item of work as per APSS 1001 & 1002

b DOUBLE SHUTTER UNIT 1.5 2.15 3.225 Sqm

Material Medium Teak wood 5.500 Rmt
Frame up to 2.0 M
Horns 0.200 Rmt
total 5.700 Rmt
Frame (100x65 mm) 0.0370 cum
wastage 5% 0.002
TBSC-D.I- Medium Teak wood 0.0390 cum 72620.00 1 cum 2832.18
01 Frame up to 2.0 M -
Total
TBSC-D.I- Medium Teak wood 0.0020 cum 80689.00 1 cum 161.38
02 Frame up to 2.0 M to 3.0
M- Total
1.1*(1500- TBSC-L.II- Flush door shutters, solid 3.218 sqm 1984.00 1 sqm 6384.51
2*65+25)*(2150-65+12) 03 bond wood block board
type with teak ply on
both faces.: 35 mm thick
conforming to IS:2202

Furniture TBSC-P.IV- Brass Aldrops (IS:2681) 1 No. 1164.00 1 No. 1164.00

01 300 mm long
 TBSC-P.V- Brass latch heavy 300 1 No. 584.00 1 No. 584.00
01 mm
TBSC-P.I-04 Brass Tower Bolt-10 mm 2 No. 391.00 1 No. 782.00
Bolt (IS:204) 250 mm
Long

TBSC-P.III- Brass fancy handles 150 4 No. 304.00 1 No. 1216.00

07 mm
TBSC-P.IX- Brass Door Stoppers 2 No. 180.00 1 No. 360.00
01
TBSC-P.II- Brass Butt hinges 6 No. 348.00 1 No. 2088.00
04 (IS:205)- 150 mm Long
TBSC-P.IX- Rubber/ Nylon door stop 2 No. 10 1 No. 20.00
04 bushes
TBSC-P.IX- MS Z Hold fasts - 300 6 No. 32.00 1 No. 192.00
08 mm long
Man TBSC-T.I-25 Labour charges for fixing 3.225 sqm 426 1 sqm 1373.85
power Flush door shutters of
any thickness to the
existing door frame
including fixing the
fixtures to the door
shutter excluding cost of
shutter

Applicable Municipal 20% 1373.85 274.77

Area Allowance

Applicable Overheads 13.615% 17432.69 2373.46

and Contractor's profit

Total 19806.15
Rate per 1 Sqm Say 6141
6 Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of
5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm
long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S.
Square tube of 19 gauges. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the
frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum
2nos. for horizontal member etc.

including Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of
19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall
have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat
moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock
rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail &
bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with
30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An
additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent
adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item
of work . including cost of Aluminium fixtures 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 200 mm long and 2
Nos. handles of 100 mm size including fixing the fixtures to door with required no. of screws, bolts and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads & contractors
profit etc., complete for finished item of work.

UNIT 1 SQM Size 0.84 2.1 1.764 SQM

Material TBSC-L.I-03 30mm thick Solid panel 5.04 RM 296 1 RM 1491.84
PVC door frame OF the
size 50x47mm
Material TBSC-L.III- 30mm thick Solid panel 1.764 sqm 2153 1 sqm 3797.89
01 PVC door shutter
consisting of frame
Furniture TBSC-P.IV- Aluminium Aldrop 1 No. 166 1 No. 166
04 (IS:2681) 200 mm long
TBSC-P.I-09 Aluminium Tower Bolt- 1 No. 79 1 No. 79
10 mm Bolt (IS:204) 200
mm Long
TBSC-P.III- Aluminium Door 2 No. 52 1 No. 104
02 Handles (IS:208) 100 mm
Long
TBSC-P.II- Aluminium Butt hinges 3 No. 64 1 No. 192
06 (IS:205)- 100 mm Long
Applicable Overheads 13.615% 5830.73 793.85
and Contractor's profit
Total 6624.58
Rate per 1 Sqm Say 3755.00
1sqm

1sqm

1sqm

1sqm

1sqm

1sqm

1Rm

1 Sqm
Medium Teak wood frame
Double Shutter cum ventilator
35mm thick both side teak
veneer flush shutter
Brass Fixture and Alround frame
& 10mm MS bars in ventilator
portion
Medium Teak wood frame
Double Shutter cum ventilator
35mm thick both side teak
veneer flush shutter
Brass Fixture and 10mm MS bars
Sal wood frame
Single shutter
35mm thick both side
commercial flush shutter
Sal wood frame
Single shutter
35mm thick both side
commercial flush shutter
Sal wood frame
Single shutter
35mm thick both side
commercial flush shutter
PVC DOOR
Aluminium Fixtures