Scribd
Upload
60 views

Engineering Formulas: Metric Pitch: 0.7 Conversion Factor: 0.03937 Pitch: Tpi: Spindle RPM: 400 Ipm

This engineering document provides formulas for calculating feed rates for metric and standard threads. It lists the metric pitch, conversion factor, calculated pitch, threads per inch, spindle RPM, and inches per minute for metric threads. It also lists the threads per inch, pitch, spindle RPM, and inches per minute for standard threads.

Uploaded by

nm2007k
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
60 views

Engineering Formulas: Metric Pitch: 0.7 Conversion Factor: 0.03937 Pitch: Tpi: Spindle RPM: 400 Ipm

This engineering document provides formulas for calculating feed rates for metric and standard threads. It lists the metric pitch, conversion factor, calculated pitch, threads per inch, spindle RPM, and inches per minute for metric threads. It also lists the threads per inch, pitch, spindle RPM, and inches per minute for standard threads.

Uploaded by

nm2007k
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Engineering Formulas

Title/Element Data
Feed Rate for Metric Threads
Metric Pitch: 0.7
Conversion Factor: 0.03937
Pitch: 0.027559
TPI: 36.2857869
Spindle RPM: 400
IPM: 11.0236

Feed Rate for Standard Threads


TPI: 32
Pitch: 0.03125
Spindle RPM: 400
IPM: 12.5000

Q529 Rev - 10/14/03 432417970.xls

You might also like