Scribd
Upload
1K views

Sample of Weld Map (Shop DWG)

This document is a sample weld map for shop Dwg. It provides a key for interpreting welding symbols on engineering drawings. The key explains that welding joints are identified with codes indicating whether they are shop (SW, S) or field (FW, F) welds. It also includes codes for weld types (butt welds, fillet welds, threaded joints), joint locations (miters), and repair/modification identifiers. Notes provide additional details on numbering conventions for cut/repaired welds, additional welds, and responsibility for communicating changes.

Uploaded by

Septian Firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
1K views

Sample of Weld Map (Shop DWG)

This document is a sample weld map for shop Dwg. It provides a key for interpreting welding symbols on engineering drawings. The key explains that welding joints are identified with codes indicating whether they are shop (SW, S) or field (FW, F) welds. It also includes codes for weld types (butt welds, fillet welds, threaded joints), joint locations (miters), and repair/modification identifiers. Notes provide additional details on numbering conventions for cut/repaired welds, additional welds, and responsibility for communicating changes.

Uploaded by

Septian Firdaus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sample of Weld Map ( Shop Dwg)

FWm FWm
10 11
So F F F F T
FWm 02 03 06 F 01
04 05
09
FW
06 SWm
12-DS-1890- HS-125-D11D-H-140-B-E-330-1/1 Spl- D
08
'-
FW
05A see note: 1.4.3
Sb4 FW
07 xx
Sb4
SW 01
03 SW
FW 13
SW 07
05 C1
see note: 1.4.2
SW
04 R1
see note: 1.4.1 Rpd4
07
Sw
12 FW
xx

SW
02

12-DS-1890- HS-125-D11D-H-140-B-E-330-1/1 Spl- C


'-
SW
01

12-DS-1890- HS-125-D11D-H-140-B-E-330-1/1 Spl- A


'-
12-DS-1890- HS-125-D11D-H-140-B-E-330-1/1 Spl- B
Catatan: '-

1 Butteld joint:
1.1. Butt Weld
a. Shop welding = SW
a.1. Shop welding Mitter = SWm
b. Field Welding = FW
b.1. Field Welding Mitter = FWm
1.2. Fillet
c. Shop Fillet Welding = S
c.1.Shop Fillet Welding for Olet = So
c.2.Shop Fillet Welding for branch 90 0 = Sb9
c.3.Shop Fillet Welding for branch 45 =0
Sb4
c.4.Shop Fillet Welding for reforcing pad 45 =
0
Rfd 4
c.5.Shop Fillet Welding for reforcing pad 900 = Rfd 9
c.6.Field Fillet Welding = F, Fo, Fb9, Fb4
1.3. Threaded Joint =
d.1. Threaded Joint = T

1.4. if Welding joint original complated and must be cut or repair welding,
numbering of welding to be use original No. plus C1,C2,...etc. for cut &
and if last joint to be repair use original No too plus R1,R2,... etc.
sample:
1 SW-01 to be repair, make report SW-01 R1 for first repair, and R2 second repair ,etc
2 SW-01 to be Cut out , make report SW-01 C1 for first Cut & Reweld, and C2 second Cut & Reweld ,etc
3 IF To be additional new joint as per rev. or etc.
use Last welding no near add joint with Plus Alfabet; SW-01A, B, C,…
1.5. If joint welding Not use yet for shop fabrication and this welding action by site,
this welding Number can be change with FW, F
1.6. Other's = by Note ( * )
1.7. If any change no at welding Map to be discussion and submit to IKPT for latest dwg revise.

You might also like