Scribd
Upload
734 views1 page

Generator Maintenance

The document provides a maintenance checklist for peak alert generators with recommended weekly, monthly, bi-annual, and annual maintenance tasks. Weekly maintenance includes running the generator for a test, checking fuel levels and operating mode. Monthly maintenance checks engine fluids and runs the generator under load. Bi-annual maintenance involves inspections of various systems performed by a certified technician. Annual maintenance consists of component replacements and testing done by a certified technician.

Uploaded by

ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
734 views1 page

Generator Maintenance

The document provides a maintenance checklist for peak alert generators with recommended weekly, monthly, bi-annual, and annual maintenance tasks. Weekly maintenance includes running the generator for a test, checking fuel levels and operating mode. Monthly maintenance checks engine fluids and runs the generator under load. Bi-annual maintenance involves inspections of various systems performed by a certified technician. Annual maintenance consists of component replacements and testing done by a certified technician.

Uploaded by

ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Peak Alert Generator Maintenance Checklist

Use this handy checklist as you work to maintain your peak alert generators.

Weekly Maintenance
 Run the generator (typically no‐load, automatic transfer switch exercise cycle).
 Verify that the unit ran and has no alarms or warnings.
 Ensure adequate fuel levels.
 Ensure that the generator is in “Auto” mode, for automatic startup.
 Check that the circuit breaker is closed.
 Make sure there are no fluid leaks.

Monthly Maintenance
 Check engine coolant level.
 Check engine oil level.
 Check the battery charger.
 Run the generator (with load, automatic transfer switch exercise cycle).

Bi‐Annual Maintenance (Schedule maintenance with a certified technician.)


 Inspect the enclosure.
 Check the battery electrolyte level and specific gravity.
 Check battery cables and connections.
 Inspect drive belts.
 Inspect the coolant heater.
 Check coolant lines and connections.
 Check for oil leaks and inspect lubrication system hoses and connectors.
 Check for fuel leaks and inspect fuel system hoses and connectors.
 Inspect the exhaust system, muffler and exhaust pipe.
 Check and clean air cleaner units.
 Inspect air induction piping and connections.
 Inspect the DC electrical system, control panel and accessories.
 Inspect the AC wiring and accessories.

Annual Maintenance (Schedule maintenance with a certified technician.)


 Change oil and filter.
 Change the fuel filter.
 Change the air filter.
 Clean the crankcase breather.
 Change spark plugs (if applicable).
 Check coolant concentration.
 Flush the cooling system (as needed).
 Perform load bank testing.
 Fuel testing & reconditioning (diesel‐fueled units only).
 Remove water from fuel tank (diesel‐fueled units only).

You might also like