Plant-Level Dynamic Control Design and Simulation of Biogas Pressurized Water Washing Process
The document discusses the design and simulation of a dynamic control scheme for purifying biogas through a pressurized water washing process. A steady state simulation model was developed using Aspen Plus software to determine optimal operating conditions. A dynamic control plan was designed to ensure a biogas purification rate over 97%. Dynamic process simulation was conducted using Aspen Dynamics and showed the control system responds well to disturbances, maintaining a CO2 removal rate over 99.8%.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
29 views
Plant-Level Dynamic Control Design and Simulation of Biogas Pressurized Water Washing Process
The document discusses the design and simulation of a dynamic control scheme for purifying biogas through a pressurized water washing process. A steady state simulation model was developed using Aspen Plus software to determine optimal operating conditions. A dynamic control plan was designed to ensure a biogas purification rate over 97%. Dynamic process simulation was conducted using Aspen Dynamics and showed the control system responds well to disturbances, maintaining a CO2 removal rate over 99.8%.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1
Plant-level dynamic control design and simulation of biogas pressurized
water washing process
Abstract : In order to purify the purification process of biomass biogas pressurized water, the design and simulation experiment of plant-level dynamic collaborative control scheme was carried out. According to the process requirements of the biogas biogas pressurized water washing pilot plant, the steady state process simulation system was established by using Aspen Plus software, and the optimal steady state operating conditions were obtained by steady state simulation of different process operating conditions. According to the process requirements, the plant-level dynamic control plan is designed reasonably to ensure that the biogas purification rate is greater than 97%. The dynamic process simulation system was established by Aspen Dynamic module, and the performance of biogas inlet flow and component disturbance test system was introduced respectively. The simulation test results and experimental operation results show that the control system has good dynamic response performance and CO under various disturbances. The removal rate of CO 2 is more than 99.8%, which effectively suppresses various disturbances. Key words : biogas purification, purification, pressurized washing, dynamic control process simulation Dynamic Control Design and Simulation of Biogas Pressurized Water Scrubbing Processes A dynamic state design system was established using Aspen Plus software following the requirements of these processes, and the operating parameters under steady state and different operation conditions was optimized. Dynamic Control schemes were also designed to ensure the biogas purification efficiency over 97%. A dynamic process simulation system was established with Aspen Dynamic model, and system performance was tested by introducing biogas intake flow disturbance and composition disturbance. Both simulation and experimental results show that the System has good dynamic response. Meanwhile, the system can effectively undertake various disturbances and ensure CO 2 Removal rate over 99.8%. Key words: biogas upgrade pressurized water scrubbing dynamic control process simulation