MZ0037

MZ2050
Fasson®
25micron MATTE
WHITE PI ESDTC/
S8095SD/BG50# WH ni

A durable polyimide
label with anti-static
topcoat and adhesive
designed for static
sensitive circuit boards
and other electronic
components

Typical Applications Key Features

 High temperature resistance
(up to 300C for short term)
 ESD treated both on adhesive and
facestock
 Good thermal transfer printing
 Good solvent resistance
 Anti-yellowing properties
 No edge-lifting

Spec Code : MZ2050 Preliminary Datasheet for Reference Only Last Modified: Jul, 2015
Facestock
A durable polyimide facestock with a high-temperature resistance, high opacity,
Fasson®
matte white static dissipative topcoat.
Basis Weight: N/A
Caliper: 0.040mm  10% ISO 534 25micron MATTE
Adhesive
A solvent-based static dissipative adhesive specially formulated to withstand high WHITE PI ESDTC/
temperatures and corrosive solvents.
S8095SD/BG50# WH ni
Liner
A super-calendared white glassine paper with excellent roll label converting
properties.
Basis Weight: 80 g/m2  10% ISO 536
Caliper: 0.070 mm  10% ISO 534
Performance Data (typical data for reference only)
Loop Tack (st,st): FTM 9 10N/25mm
20min. 90°Peel Adhesion (st,st): FTM 2 8N/25mm
24hours 90°Peel Adhesion (st,st): FTM 2 10N/25mm
Surface Resistance: ANSI/ESD STM11.11 < 1011 Ω
Voltage(adhesive side): Avery Test Method < 25 V/in2
Minimum Application Temperature: 10 °C
Service Temperature Range: -40~ +300°C

Features and Benefits

The product features excellent tear strength, heat resistance, dimensional stability,
electrical static dissipative, chemical resistance. The specially designed topcoat in
combination with the appropriate thermal transfer ribbon features excellent scuff,
scratch, UV, ultra-high temperature &solvent resistance. The label exhibits no yellowish,
shrinking or warped after high temperature of one or two times of soldering process.
Using 25um polyimide filmbase can meet the application requirements, while save the
cost.
Applications and Uses
AVERY MZ2050 is specially designed for thermal transfer printing tracking label.
25micron MATTE WHITE PI ESDTC
Recommended for static sensitive PCB (printed circuit board) and other electronic
components preprocess labeling which high temperature resistance and static
dissipative are critical. The product suitable for both reflow soldering and wave soldering S8095SD
processes, withstands surface mount circuit board processes on either the top or bottom
side of the board, but testing is always recommended before production.
BG50# WH ni
Conversion and Printing
The high performance topcoat was specially designed for thermal transfer printing, it also
suitable for usual printing techniques if necessary. The choice of thermal transfer printer
and ribbon influences the overall print quality and environmental resistant performance.
Our material can be used with most of the high performance industrial grade thermal
transfer printers and resin ribbons. Testing for specific printer and ribbon is mandatory.
More details please see below Appendix or contact us.

This product can be die cut and stripped at high speeds on most web-fed presses.
Harden treated and sharp dies, preferably in flat-bed, are important to ensure smooth
conversion.
Not recommend for automatic dispensing.
Shelf life
One year when stored at 23 ± 2°C at 50 ± 5% RH.

Asia Pacific
32/F., Skyline Tower
39 Wang Kwong Road
Kowloon Bay, Kowloon,
Hong Kong
Tel: +852 2802-9618

Warrenty
All statements, technical information and recommendations about AVERY liable or responsable for consequential or incidental damages. NO EXPRESS
DENNISON products are based upon tests believed to be reliable but but do WARRANTIES, WHETHER OF MERCHANTIBILITY OR FITNESS FOR ANY
no constitute a guarantee or warranty. All AVERY DENNISON products are ARTICULAR USE, OR OTHERWISE, EXCEPT AS SET FORTH ABOVE
sold with the understanding that PURCHASER has independently determined (WHICH IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES)
the suitability of such products for its purposes. AVERY DENNISON products SHALL APPLY TO PRODUCTS SOLD BY AVERY DENNISON. AVERY
are warranted to be free of defects in material or workmanship for a period of DENNISON SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER
one year from the date of shipment. Any product shown to the satisfaction of SUCH WARRANTIES. NO WAIVER, ALTERNATION, ADDITION OR
AVERY DENNISON within the time provided to be so defective shall be MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID
replaced without charge of AVERY DENNISON may issue credit in such UNLESS MADE IN WRITING AND SIGNED BY AN EXECUTIVE OFFICER
amount as it seems reasonable however, in no event shall AVERY OF AVERY DENNISON. No salesman, representative, or agent of AVERY
DENNISON be responsable for claims beyond the replacement value of the DENNISON is authorized to give any guarantee, warranty or make any
defective product or in any way representation contrary to the above.
Appendix
Performance Data
The following technical data should be considered representative or typical only and should not be used for specification purposes.
Initial 24 Hours dwell at Room
Properties
20minute dwell Temperature
Adhesion to
Stainless Steel(FTM2) 8N/25mm 10N/25mm

Properties Test Method Average Results

USA Units SI Units
Thickness ASTM D1000
Substrate 0.0016 inch 0.040 mm
Adhesive 0.0011 inch 0.027 mm
Liner 0.0027 inch 0.070 mm
Laminate total 0.0054 inch 0.137 mm
11
Surface Resistance ANSI/ESD STM11.11 < 10 Ω /
2
Voltage(adhesive side) Avery Test Method < 25 V/in /
Operating Temp. -40ºC to +300ºC (-40 ºF to +572ºF)
Thermal Characteristics Application Temp. 10ºC↑ (50 ºF↑ )
Short Term 90seconds at 300 ºC (572 ºF)
Shelf Life 1 year at 23 ± 2ºC and 50 ± 5% RH
Printer recommendations Zebra 105SL、110
Avery AX8, Ricoh B110CR, Armor AXR8, DNP R510、R300, Sony TR4070, Iimak
Ribbon recommendations
SP330, Nitto Denko DuraInk H, etc.
References:

ASTM: American Society for Testing and Materials (U.S.A.)

Sl: International Systems of Units. All Sl units are mathematically derived from U.S. conventional units.