Project Report

On

Title of Project

Session 2018-19

Name of discipline

Submitted By
STUDENT NAME (s)
Roll Number (s)

Under the guidance of

ABES ENGINEERING COLLEGE, GHAZIABAD

AFFILIATED TO
DR. A.P.J. ABDUL KALAM TECHNICAL UNIVERSITY, U.P., LUCKNOW
(Formerly UPTU)

1
 STUDENT’S DECLARATION

I / We hereby declare that the work being presented in this report entitled
“TITLE OF THE PROJECT” (font size 14) is an authentic record of my / our

own work carried out under the supervision of Dr. /Mr. /Ms.
“SUPERVISOR NAME” (font size 14)
The matter embodied in this report has not been submitted by me / us for
the award of any other degree. (font size 12Arial 1.5 Line Spacing)

Dated: Signature of students(s)

This is to certify that the above statement made by the candidates is correct to the
best of my knowledge.

Signature of Supervisor

2
 TABLE OF CONTENTS Page

DECLARATION ...................................................................................................
CHAPTER 1 1
1.1. Problem Introduction

1.1.1. Motivation .................................................................................... 2

1.1.2. Project Objective ......................................................................... 2

1.1.3 Scope of the Project .................................................................... 2

1.2 Introduction to Technologies

1.2.1. Language ................................................................................... 3

1.2.2. Library / In-built function / package / modules ............................. 4

1.2.3. Hardware Requirement .............................................................. 5

1.2.4. Software Requirement ............................................................... 5

1.2.5. IDE ........................................................................................... 6

CHAPTER 2
2.1 Algorithm / Approach ............................................................................. 7
2.2 Work Flow Diagram................................................................................10
2.3 Explain your Code................................................................................ 12
CHAPTER 3
3.1 Snapshots / Output of Interfaces ..........................................................18
CHAPTER 4 (CONCLUSIONS) .....................................................................25

REFERENCES... ........................................................................... 26

3
 CHAPTER 1
INTRODUCTION

It is the first chapter of the Report. The purpose of an introduction in the B. Tech
Project Report is to justify the reasons for writing about the report. The goal in this
section is to introduce the topic to the reader, provide an overview of previous
research on the topic, and identify the own hypothesis. The goals just mentioned
could, if abused, lead to write an introduction that is pages and pages long. It can be
noted here that the introduction should not contain every bit of detail in the report, and
it should not include support for the report. An introduction might, however, include
the reasons for supporting the report.

In order for readers to trust the writer, the introduction must be well written with few
errors. In order to keep readers reading, the writer needs to catch the attention of the
reader and write in an interesting way. The unique language enhancement feature
may suggest words to strengthen the writing. Strong writing may hold readers'
attention.

It has been observed that the difficulty level to write the Introduction is average and it
takes the variable amount of time.

Following sub headings are to be included in this chapter depending on the project-

1.1. Problem Introduction

1.1.1. Motivation

1.1.2. Project Objective

1.1.3 Scope of the Project

1.2. Introduction to Technologies

1.2.1 Language

In this you have to explain the features and history of language

1.2.2 Library / In-built function / package / modules used in your

4
 List and explain all Library / In-built function / package / modules used
in your project

1.2.3. Hardware Requirement

Write hardware requirement for your project

1.2.4. Software Requirement

Write s/w requirement for your project

1.2.5. IDE

Explain about IDE( Integrated Development Tool) / tool

5
 CHAPTER 2
SYSTEM DESIGN
2.1 Algorithm / Approach
Write detailed algorithm / approach used in project development.

2.2 Work Flow Diagram

Explain the detailed implementation steps of your project. Explain all the intermediate steps of
your project that give the clear picture of its functioning. Using flow control box and flow
control arrows explain the work flow pattern.

Sample Work flow

2.3. Explain your Code

Write code with proper comment .

6
 CHAPTER 3

RESULTS

3. Snapshots / Output of Interfaces

Display all possible Output.

CHAPTER 4
CONCLUSION

References
1. Doe, N., Control System Principles, New York: John Wiley, 1999.

2. https://www.w3schools.com/python/default.asp

3. https://www.javatpoint.com/data-structure-tutorial