Worker’s Safety Handbook

for Rigger and Signalman

 Contents

Preface 3

Proper Attire for Rigger and Signalman 4

Roles and Responsibilities of a Rigger 5

Good and Bad Rigging Practices 12

Inspection of Hooks and Shackles 26

Types of Wear and Tear for Wire Ropes 28

Roles and Responsibilities of a Signalman 31

Recommended Crane Hand Signals 33

Good Communication Practices 36

Year of issue: 2013

First revision: 2018
Second revision: 2019
2
 Preface 1. Proper Attire for Rigger
and Signalman
Wear personal protective equipment (PPE)
Put on the proper attire and PPE at all times
This handbook serves as a workplace safety and health
resource for workers who are involved in work activities Helmet
Helmet Identification
involving lifting equipment such as cranes. The Rigger and Identification
Tag Tag
Signalman handbook highlights general safety pointers to
ensure safe lifting operations. This handbook is intended to
assist the Rigger and Signalman to better understand their
roles and responsibilities, show examples of good and bad
practices for loading and rigging, perform basic inspection
of lifting equipment such as hooks, shackles and wire ropes,
adhere to good communication practices, and recognise crane
hand signals.

This handbook is produced for education and informational

purposes by the National Crane Safety Taskforce and Workplace
Safety and Health Council and serves as a reference for
good practices. Reflective
Vest Reflective
Vest Gloves
Gloves
Safety Safety
Boots Boots

Figure 1: Signalman attire Figure 2: Rigger attire

3 4
 2. Roles and Responsibilities of 3. Roles and Responsibilities of
a Rigger a Rigger
Check slings Check load

Check the slings and Make sure the load is properly

ensure that the rigging secured and inform the Crane
angle is correct. Operator of the weight of the load.

5 6
 4. Roles and Responsibilities of 5. Roles and Responsibilities of
a Rigger a Rigger
Check lifting gears Ensure load lifted is stable, balanced
and secured

Make sure the lifting gears such as hooks, Make sure the load is stable,
slings and shackles are well-maintained balanced and secured before any
and in good working condition. lifting operation.

7 8
 6. Roles and Responsibilities of 7. Roles and Responsibilities of
a Rigger a Rigger
Ensure loose loads are secured Report defective lifting gear to
Lifting Supervisor

Make sure any loose items are placed in a proper Immediately report any defective
receptacle or container to prevent any items from or faulty lifting gear to the Lifting
falling during the lifting operation. Supervisor.

9 10
 8. Roles and Responsibilities of 9. Good and Bad Rigging Practices
a Rigger Correct use of choker hitches
Use paddings on the load edges

Figure 3: Use shackle whenever possible.

Place adequate paddings on the

edges of the load to prevent the Figure 4: Ensure shackle is positioned correctly.
sling from damage.

11 12
 10. Good and Bad Rigging Practices 11. Good and Bad Rigging Practice
Correct way to balance a shackle load Correct hook-up methods
Packings Hook

Washers

Figure 5: Insert sufficient washers to centralise the position of Figure 7: Make sure the safety latch is in good condition.
the shackle.

Figure 6: Make sure the shackle is not pulled down at an angle. Figure 8: Make sure LG (e.g. webbing sling) is hooked up.

13 14
 12. Good and Bad Rigging Practices
Correct rigging method

Figure 10: Secure the hooks facing out.

Figure 9: Wrong hooking up method. Figure 11: Do not secure the Figure 12: Do not wrap a rope
hooks facing in. around the hook.

15 16
 13. Good and Bad Rigging Practices 14. Good and Bad Rigging Practices
Correct rigging method Incorrect rigging method

It will tilt to one side

17 18
 15. Good and Bad Rigging Practices 16. Good and Bad Rigging Practices
Hook up unused slings Correct loading method

Load Load

Result

Figure 17: Correct Figure 18: The eye bolt will bend if
loading method. loading is not done correctly.

Figure 15: Make sure any unused slings are hooked up properly.

Figure 16: Do not leave unused slings unhooked.

19 20
 17. Good and Bad Rigging Practices 18. Good and Bad Rigging Practices
Use paddings during lifting Correct methods of joining sling eyes

Links

Sling Eyes

No Padding

Figure 22: Wrong method of joining the sling eyes.

21 22
 19. Good and Bad Rigging Practices 20. Good and Bad Rigging Practices
Use original screw pin Use tag line to control movement of the load

RIGGERMAN

Original Screw Pin

Figure 23: Use the original screw pin for the shackle.

Bolt

Use tagline with sufficient length and

diameter so that the tagline can be easily
Figure 24: Do not use a bolt as a screw pin as it will bend. gripped and the load stabilised.

23 24
 21. Good and Bad Rigging Practices 22. Inspection of Hooks and Shackles
Correct method of unloading Check hook for any defects and make sure
it is in good working condition

Check for wear and

deformation
Check for
cracks and
twisting

Signs of
“Opening Up”

Figure 25: Do not pull out the sling from underneath the load
because it will damage the sling.
Check for wear and cracks

Check that
hook is not
twisted

25 26
 23. Inspection of Hooks and Shackles 24. Types of Wear and Tear for Wire
Check shackle for any defects and make Ropes
sure it is in good working condition Check wire ropes for any defects and make sure
they are in good working condition

Check cracks,
bending and
Check wear twisting

Figure 30: Crushed severely.

Check
wear and
Pin always straightness
seated

Check
opening width

Figure 31: Flatten severely.

27 28
 25. Types of Wear and Tear for Wire Ropes 26. Types of Wear and Tear for Wire Ropes
Check wire ropes for any defects and make sure Check wire ropes for any defects and make sure
they are in good working condition they are in good working condition

Figure 32: Bird cage. Figure 37: Bulged severely.

Figure 33: Dog-leg kink.

Figure 38: Core protrusion.

Figure 39: Excessive clearance between strands.

Figure 34: Kink. Figure 35: Figure 36:

Open kink. Closed kink.
29 30
 27. Roles and Responsibilities of 28. Roles and Responsibilities of
a Signalman a Signalman
Check with the rigger that the load is Give correct crane hand signals
ready to be lifted

Check with the rigger that the Give the correct crane hand
load is ready to be lifted before signals clearly to the Crane
giving the signal to lift. Operator to lift the load.

31 32
 29. Recommended Crane Hand Signals
Understand and practise correct
crane hand signals

Hoist Lower

Figure 42: Clench and unclench fingers to signal

Jib Up Jib Down take the strain.

Derricking Jib

Figure 40: Signal with one hand. Other hand on head.

Slew Left Slew Right

Figure 43: Arm extended, pointing with finger in

Travel to me Travel from me direction of swing of boom.

Figure 41: Signal with both hands.

33 34
 30. Good Communication Practices
Practise good communication within
the Lifting Team

Extend Jib/ Retract Jib/

Trolley Out Trolley In
Telescoping Jib / Horizontal Jib LIFTING
PLAN
and
Figure 44: Signal with one hand. Other hand on head. SWP

Stop Emergency
Stop

Figure 45: Clench and unclench fingers to signal

inch the load.
Communication between Lifting Supervisor,
Crane Operator, Rigger and Signalman must
be maintained at all times.

35 36
 Published in July 2011 by the Workplace
31. Good Communication Practices Safety and Health Council in collaboration
with the Ministry of Manpower.
Practise good communication within
All rights reserved. This publication may not be
the Lifting Team reproduced or transmitted in any form or by any
means, in whole or in part, without prior written
permission. The information provided in this
publication is accurate as at time of printing.
All cases shared in this publication are meant for
learning purposes only. The learning points for
each case are not exhaustive and should not be
taken to encapsulate all the responsibilities and
obligations of the user of this publication under
the law. The Workplace Safety and Health Council
does not accept any liability or responsibility
to any party for losses or damage arising from
following this publication.

This publication is available on the

Workplace Safety and Health Council
Website: www.wshc.sg
Email: [email protected]

Rigger and Signalman must

maintain good communication
between each other at all times.

37