Scribd
Upload
35 views1 page

Groundwater: Table 4 Generalised Ground Profile

The document summarizes the results of a ground investigation along a railway alignment. It describes three soil units encountered: (1) topsoil and fill material near stations containing demolition waste; (2) loose, inconsistent fill beneath; and (3) alluvial deposits of silt, sand, gravel and cobble deeper down. Groundwater was not found during investigation but is expected to be deeper than excavations. The soil data will be used to develop a 3D ground model to inform design of proposed double tracking.

Uploaded by

Ravi Salimath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views1 page

Groundwater: Table 4 Generalised Ground Profile

The document summarizes the results of a ground investigation along a railway alignment. It describes three soil units encountered: (1) topsoil and fill material near stations containing demolition waste; (2) loose, inconsistent fill beneath; and (3) alluvial deposits of silt, sand, gravel and cobble deeper down. Groundwater was not found during investigation but is expected to be deeper than excavations. The soil data will be used to develop a 3D ground model to inform design of proposed double tracking.

Uploaded by

Ravi Salimath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

quantities across the alignment suggesting that the site had a history of localised filling and uncontrolled

disposal. The majority of the fill material was encountered near the railway stations and at the location of the
historic rail siding (see Plate 2).
The fill material comprises some demolition material such as bricks fragments, coal pieces, glass, wood,
metal pieces, possible clinker and other anthropogenic materials indicating it to be “non-engineered” fill. It is
typically loosely packed and is of inconsistent composition (i.e. highly varied between silts, sands and
gravels).
Unit 3 - Alluvium Deposits
Beneath the topsoil and fill is extensive deposits of alluvial material comprising a mixture of silt, sand, gravels
and cobbles/boulders. The alluvium can vary significantly over short distances, however, the insitu soils
generally become more competent with depth.
This units along with investigation data will be incorporated in the 3D ground model for the proposed
alignment to be developed using CIVIL 3D 2018 software.
Table 4 Generalised ground profile

Unit Top of Bottom of Geological Description Scala Probe


Layer Layer Blows/100mm
(m BEGL) (m BEGL)
1 0 0 - 0.25 Predominantly silt and sand, but with some gravels [Topsoil]. -

2 0 - 0.25 0.1 - 1.35 Silt, sand and gravel. Frequent anthropogenic materials [Fill]. 1 to 20+

3 0.1 - 1.35 >2 Silt, sand and gravel. Frequent cobbles and boulders 1 to 20+
[Alluvium].

Groundwater
Groundwater was not encountered during the ground investigation. It is anticipated that the groundwater
level is significantly deeper than the anticipated excavation for the formation of the proposed double tracking.
However it should be noted that groundwater is subject to seasonal variations.

Aurecon T2UH Double Tracking, 2019-05-22 11

You might also like