common design parameters:

Strength Ratio, m= 11.21

Factor, β1= 0.85
ρmin= 0.0061
ρb= 0.0548
ρmax= 0.0325
Ec= 23087.479291
f r= 3.4385607454
n= 8
DESIGN ON ROOF GIRDERS:
6.1.0 DESIGN STRENGTH
fc' 24.13 MPa
fy 230 MPa
β 0.85
main bar 16 mm
lateral bar 12 mm
6.1.1 CLEAR SPANS fyv 230 MPa
Spans 1: 2.41 m
Spans 2: 0.86 m

6.1.2 BEAM DIMENSIONS Simply

supported
Minimum thickness for deflection 140 mm
Assume beam size:
depth= 200 mm
width= 150 mm
PC= 40 mm
main bar= 16 mm
lateral ties= 12 mm
thickness of slab= 125 mm

Effective depth: 140 mm

6.1.3 DEAD LOADS
Span B1 Span B2
Beam weight= 0.71 kN/m Beam weight= 0.71 kN/m
Weight of Partition/CHB 0.00 kN/m Weight of Partition/CHB 0.00 kN/m
Slab right deadload 3.08 kN/m Slab right deadload 4.62 kN/m
Slab left deadload 6.16 kN/m Slab left deadload 0.00 kN/m
Total dead load 9.95 kN/m Total dead load 5.33 kN/m
6.1.4 LIVE LOADS
Beam live load 1.20 kN/m Beam live load 1.20 kN/m
Slab right liveload 1.90 kN/m Slab right liveload 1.42 kN/m
Slab left liveload 1.90 kN/m Slab left liveload 0.00 kN/m
Total live load 5.00 kN/m Total live load 2.62 kN/m
6.1.6 SEISMIC LOADS
Span 1-2-3-4-5
Factored seisimic moment= 54.92 kN-m
Factored seisimic shear= 27.46 kN
6.1.7 FACTORED LOADS
Factored dead load #VALUE!
Factored live load #VALUE!
Total factored load #VALUE!
6.1.8 COMPUTE MOMENTS
Deadloads
Spans 1, exterior end: (-)M1= #VALUE! Spans 1, exterior end:
Spans1, midspan: (+)M2= #VALUE! Spans1, midspan:
Spans 1-2, interior support: (-)M3= #VALUE! Spans 1-2, interior suppor
Span 2, midspan: (+)M4= #VALUE! Span 2, midspan:
Span 2-3, interior support: (-)M5= #VALUE! Span 2-3, interior support:
Span 3, midspan: (+)M6= #VALUE! Span 3, midspan:
Span 3-4, interior support: (-)M7= #VALUE! Span 3-4, interior support:
Span 4, midspan: (+)M8= #VALUE! Span 4, midspan:
Span 4-5 , interior support: (-)M9= #VALUE! Span 4-5 , interior support
Span 5, midspan: (+)M10= #VALUE! Span 5, midspan:
Span 5-6 , interior support: (-)M11= #VALUE! Span 5-6 , interior support

6.1.9 Design factored moments

Primary Load Case
Section
D L
Spans 1, exterior end: #VALUE! #VALUE!
Spans1, midspan: #VALUE! #VALUE!
Spans 1-2, interior support: #VALUE! #VALUE!
Span 2, midspan: #VALUE! #VALUE!
Span 2-3, interior support: #VALUE! #VALUE!
Span 3, midspan: #VALUE! #VALUE!
 Span 3-4, interior support: #VALUE! #VALUE!
Span 4, midspan: #VALUE! #VALUE!
Span 4-5 , interior support: #VALUE! #VALUE!
Span 5, midspan: #VALUE! #VALUE!
Span 5-6 , interior support: #VALUE! #VALUE!

6.1.10 Flexural Reinforcement at midspan

Mu b d Ru
Section Req'd ρ
kN-m mm mm mPa
2 #VALUE! 150 mm 140 mm #VALUE! #VALUE!
4 #VALUE! 150 mm 140 mm #VALUE! #VALUE!
6 #VALUE! 150 mm 140 mm #VALUE! #VALUE!
8 #VALUE! 150 mm 140 mm #VALUE! #VALUE!
10 #VALUE! 150 mm 140 mm #VALUE! #VALUE!

6.1.11 Flexural Reinforcement at supports

Mu b d Ru
Section Req'd ρ
kN-m mm mm mPa
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
1
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
3
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
5
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
7
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
9
 9
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
#VALUE! 150 mm 140 mm #VALUE! #VALUE!
11
#VALUE! 150 mm 140 mm #VALUE! #VALUE!

6.1.12 Shear at face supports

Left, DL = #VALUE! LL = #VALUE!
RG-1/1:
Rigth, DL = #VALUE! LL = #VALUE!

Left, DL = #VALUE! LL = #VALUE!

RG-1/2:
Rigth, DL = #VALUE! LL = #VALUE!

Left, DL = #VALUE! LL = #VALUE!

RG-1/3:
Rigth, DL = #VALUE! LL = #VALUE!

Left, DL = #VALUE! LL = #VALUE!

RG-1/4:
Rigth, DL = #VALUE! LL = #VALUE!

Left, DL = #VALUE! LL = #VALUE!

RG-1/5:
Rigth, DL = #VALUE! LL = #VALUE!

6.1.13 Design for shear

Shear Capacity, φVc= 17.54 kN
Shear limits, Vc= 23.38 kN
2Vc= 46.76 kN
Area of stirrups= 226.19 mm²
Max. spacing= 1040.46 mm
Seismic provision:
Confinement zone= 1.20 m
Max. spacing= 0 mm
For Span 1-3:
Vd= #VALUE!
 Vl= #VALUE!
Vu= #VALUE!
Vs= #VALUE!

Spacing: #VALUE!
No. of stirrups within #DIV/0!
the confine. Zone

#VALUE!

6.1.14 Check Deflection

Allowable deflection due to liveload= 2.389 mm
BEAM TYPE: L-BEAM

Effective flange width (b)= 222 mm

yg = 91 mm
Ig= 78 10^6 mm^4
nAs= #VALUE!
x= #VALUE!
Icr= #VALUE!
Mcr= 2.48 kN-m
Ma= #VALUE!
Effective moment of inertia= #VALUE!
Ie = #VALUE!
Immediate deflection due to liveload= #VALUE! #VALUE!

LONG TERM DEFLECTION:

Compressive steel ratio= #VALUE!

Time dependent factor= 2
Multiplier foe long term deflection= #VALUE!
Deflection due to sustain load= #VALUE!
Long term deflection= #VALUE! #VALUE!
 Liveloads
rior end: (-)M1= #VALUE!
pan: (+)M2= #VALUE!
erior support: (-)M3= #VALUE!
pan: (+)M4= #VALUE!
erior support: (-)M5= #VALUE!
pan: (+)M6= #VALUE!
erior support: (-)M7= #VALUE!
pan: (+)M8= #VALUE!
erior support: (-)M9= #VALUE!
pan: (+)M10= #VALUE!
erior support: (-)M11= #VALUE!

Case Design Moment

E (-) M (+) M
54.92 kN-m #VALUE! #VALUE!
27.46 kN-m 0.00 kN-m #VALUE!
54.92 kN-m #VALUE! #VALUE!
27.46 kN-m 0.00 kN-m #VALUE!
54.92 kN-m #VALUE! #VALUE!
27.46 kN-m 0.00 kN-m #VALUE!
54.92 kN-m #VALUE! #VALUE!
27.46 kN-m 0.00 kN-m #VALUE!
54.92 kN-m #VALUE! #VALUE!
27.46 kN-m 0.00 kN-m #VALUE!
54.92 kN-m #VALUE! #VALUE!

As n
mm2 pcs
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!

As n
mm2 pcs
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
 Simply One end Both end
Member supported continuous continuous Cantilever

Beams or ribbed
one way slabs 150.63 130.27 114.76 301.25

simply supported #VALUE!

fixed end at support moment #VALUE!
fixed end moment at midspan #VALUE!
cantilever #VALUE!

For midspan
Effective flange width:
a) b≤ 1/4(span)= 602.5
b)b≤bw +16t= 2150
c)b≤center to center spacing=
a
s
T-BEAM d
L-BEAM