Scribd
Upload
49 views

Subestación Iquitos: Test Object-Device Setting

The document summarizes the testing of a relay device using a PW636i testing system. It provides details of the test object settings, equipment information, test modules used, and results of 19 tests of the device's overcurrent function where the current was varied from 1.5 to 4 times the nominal current across phases A, B, and C. All tests showed errors within an acceptable range and passed.

Uploaded by

Manuel Elías
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Subestación Iquitos: Test Object-Device Setting

The document summarizes the testing of a relay device using a PW636i testing system. It provides details of the test object settings, equipment information, test modules used, and results of 19 tests of the device's overcurrent function where the current was varied from 1.5 to 4 times the nominal current across phases A, B, and C. All tests showed errors within an acceptable range and passed.

Uploaded by

Manuel Elías
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

PW Series Relay Testing System

Subestación Iquitos
Test Object-Device Setting

Station/Bay Information:
Station Name: Bahia de Transformador Bay Address: =F1.C01.CPM02
Station Address: Iquitos Tester: Manuel Corrales
Bay Name: T-03

Device Information:
Device Name: -BCU Serial Number: 1183390313
Device Model: SEL451 Setting List Number: EO_RevD
Device Address: =F1.C01.CPM02 Additional Info: www.indexum.com
Manufacturer: SCHWEITZER

Nominal Values:
Vnom: 57.735V Fnom: 60.000Hz V Primary: 60.000kV Debounce Time: 0ms
Inom: 1.000A Vdc: 0.000V I Primary: 800.000A

Test Equipment Information:


Type: PW636i Imax: 32.000A
Serial Number: PE363150105 Test Start: 08-16-2019 17:16:07
CommunicationPort: ETHERNET.COM Test End: 08-16-2019 17:16:42
Vmax: 300.000V

1. Medidas W1 (60.0kV)

Page 1
PW Series Relay Testing System

2. Función Sobrecorriente 50/51 W1(60KV)

System Parameters:
Tprefault : 1.000 Vz Define : Vs Phi(Vz) : 0.0Deg
Fault : A-E Phi(Vz) Ref. : Phi(Va)
CT Polarity : Line |Vz| : 22.000V

Characteristic Curve

Test Module Parameter


Name Version
Current Inverse Time 2.4.0-2202-1026

Test Setting
Inom: 1.000A Td: 0.090 Ipickup: 0.940

Page 2
PW Series Relay Testing System

Test Result

1.I=1.500*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.500A

Settings Trip time Error ErrorAbs Results


1.342S 1.355S 1.0 0.013S Passed

2.I=2.000*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.000A

Settings Trip time Error ErrorAbs Results


0.828S 0.832S 0.5 0.004S Passed

3.I=2.500*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.119S 0.019S Passed

4.I=3.000*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.000A

Settings Trip time Error ErrorAbs Results


0.100 0.118S 0.018S Passed

5.I=3.500*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.500A

Page 3
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
0.100S 0.116S 0.016S Passed

6.I=4.000*In,A-B
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 4.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.115S 0.015S Passed

7.I=1.500*In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.500A

Settings Trip time Error ErrorAbs Results


1.342S 1.356S 1.1 0.014S Passed

8.I=2.000*In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.000A

Settings Trip time Error ErrorAbs Results


0.828S 0.835S 0.8 0.007S Passed

9.I=2.500*In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.119S 0.019S Passed

10.I=3.000*In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.000A

Page 4
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
0.100S 0.118S 0.018S Passed

11.I=3.500In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

12.I=4.000In,B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 4.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.115S 0.015S Passed

13.I=1.500*In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.500A

Settings Trip time Error ErrorAbs Results


1.342S 1.355S 1.0 0.013S Passed

14.I=2.000*In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.000A

Settings Trip time Error ErrorAbs Results


0.828S 0.835S 0.8 0.007S Passed

15.I=2.500*In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.500A

Page 5
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
0.100S 0.117S 0.017S Passed

16.I=3.000In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

17.I=3.500*In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.116S 0.016S Passed

18.I=4.000*In,C-A
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 4.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.111S 0.011S Passed

19.I=1.500*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.500A

Settings Trip time Error ErrorAbs Results


1.342S 1.351S 0.009S Passed

20.I=2.000*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.000A

Page 6
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
0.828S 0.833S 0.6 0.005S Passed

21.I=2.500*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

22.I=3.000*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.114S 0.014S Passed

23.I=3.500*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.500A

Settings Trip time Error ErrorAbs Results


0.100S 0.112S 0.012S Passed

24.I=4.000*In,A-B-C
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 4.000A

Settings Trip time Error ErrorAbs Results


0.100S 0.111S 0.011S Passed

Page 7
PW Series Relay Testing System

Test Result Assessing:

The test points are all successful!

3. Función Sobrecorriente 50/51N_W1(60kV)

System Parameters:
Tprefault : 0.500 Vz Define : Vs Phi(Vz) : 0.0Deg
Fault : A-E Phi(Vz) Ref. : Phi(Va)
CT Polarity : Line |Vz| : 22.000V

Page 8
PW Series Relay Testing System

Characteristic Curve

Test Module Parameter


Name Version
Current Inverse Time 2.4.0-2202-1026

Test Setting
Inom: 1.000A Td: 0.130 Ipickup: 0.220

Test Result

1.I=0.500*In,A-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 0.500A

Page 9
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
1.099S 1.109S 0.9 0.010S Passed

2.I=1.200*In,A-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.200A

Settings Trip time Error ErrorAbs Results


0.527S 0.535S 1.4 0.008S Passed

3.I=1.900*In,A-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.900A

Settings Trip time Error ErrorAbs Results


0.413S 0.422S 2.2 0.009S Passed

4.I=2.600*In,A-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.600A

Settings Trip time Error ErrorAbs Results


0.100S 0.123S 0.023S Passed

5.I=3.300In,A-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.300A

Settings Trip time Error ErrorAbs Results


0.100S 0.116S 0.016S Passed

6.I=0.500*In,B-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 0.500A

Page 10
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
1.099S 1.111S 1.1 0.012S Passed

7.I=1.200*In,B-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.200A

Settings Trip time Error ErrorAbs Results


0.527S 0.534S 1.3 0.007S Passed

8.I=1.900*In,B-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.900A

Settings Trip time Error ErrorAbs Results


0.413S 0.420S 1.7 0.007S Passed

9.I=2.600*In,B-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.600A

Settings Trip time Error ErrorAbs Results


0.100S 0.120S 0.020S Passed

10.I=3.300*In,B-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.300A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

11.I=0.500*In,C-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 0.500A

Page 11
PW Series Relay Testing System
Settings Trip time Error ErrorAbs Results
1.099S 1.110S 1.0 0.011S Passed

12.I=1.200*In,C-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.200A

Settings Trip time Error ErrorAbs Results


0.527S 0.533S 1.1 0.006S Passed

13.I=1.900*In,C-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 1.900A

Settings Trip time Error ErrorAbs Results


0.413S 0.418S 1.2 0.005S Passed

14.I=2.600*In,C-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 2.600A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

15.I=3.300*In,C-E
Prefault Voltage: 57.735V Prefault Frequency: 60.000Hz Angle: 75.000Deg
Prefault Current: 0.000A Fault Voltage: 50.000V Fault Frequency: 60.000Hz
Prefault Angle: 75.000Deg Fault Current: 3.300A

Settings Trip time Error ErrorAbs Results


0.100S 0.117S 0.017S Passed

Page 12
PW Series Relay Testing System

Test Result Assessing:

The test points are all successful!

Test By: Approve By:

Page 13

You might also like