Scribd
Upload
424 views

Raft Footing - General-Model

A 150mm thick concrete raft foundation with A98 fabric will have a 200mm thick external concrete block wall, 200mm thick internal concrete block wall, and 150mm compacted hardcore under a 50mm coarse sand blinding layer. The raft will support a 300 x 800mm edge beam with T12 and R8 reinforcement bars at 400mm spacing and 50mm concrete cover on all sides and bottom.

Uploaded by

Justin Musopole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
424 views

Raft Footing - General-Model

A 150mm thick concrete raft foundation with A98 fabric will have a 200mm thick external concrete block wall, 200mm thick internal concrete block wall, and 150mm compacted hardcore under a 50mm coarse sand blinding layer. The raft will support a 300 x 800mm edge beam with T12 and R8 reinforcement bars at 400mm spacing and 50mm concrete cover on all sides and bottom.

Uploaded by

Justin Musopole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

150mm min.

thick 20/20
150mm min. thick raft with
concrete raft with A98 fabric
200mm thick external 200mm thick internal A98 fabric forming ground
forming ground floor slab (Top
concrete block wall concrete block wall floor slab
cover = 50mm)
200

225

225

225
min.
600

150mm compacted hardcore 150mm compacted hardcore


225
with upper surface blinded 400 with upper surface blinded
225 225
with 50mm coarse sand min. with 50mm coarse sand
300 x 800dp 20/20 concrete edge 850
beam with 8 number T12 and R8 300
at 400mm min.
(side and bottom cover = 50mm)

RAFT/EDGE BEAM DETAIL RAFT JOINT DETAIL PARTITION FOUNDATION DETAIL

You might also like