Scribd
Upload
62 views

Pump Performance Datasheet: Operating Conditions Liquid

The pump performance datasheet provides specifications for a pump, including its operating conditions, performance details, material properties, pressure data, and driver and power requirements. Key details are the pump has a flow of 0 m3/h, head of 0 m, rated speed of 0 rpm, and efficiency of 0%. Performance curves show head, efficiency, and NPSH versus flow rate.

Uploaded by

infonetsmg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views

Pump Performance Datasheet: Operating Conditions Liquid

The pump performance datasheet provides specifications for a pump, including its operating conditions, performance details, material properties, pressure data, and driver and power requirements. Key details are the pump has a flow of 0 m3/h, head of 0 m, rated speed of 0 rpm, and efficiency of 0%. Performance curves show head, efficiency, and NPSH versus flow rate.

Uploaded by

infonetsmg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Pump Performance:According to ISO9906,Grade

Pump Performance Datasheet


Customer Quote number
Customer reference Pump size
Item number Stages
Service Based on curve number 0
Quantity of pumps Date last saved
Operating Conditions Liquid
Flow 0.0 m3/h Liquid type
Head(requested) 0.0 m Additional liquid description
Head(actual) 0.0 m Solids diameter,max 0 mm
Suction pressure,rated/max Temperature,max 0 C
NPSH available,rated Ample m Fluid density,rated/max 0.0 m3/kg
Frequency 0 HZ Viscosity,rated 0.0 cst
Performance Material
Pump speed,rated 0 rpm Casing Material
Impeller diameter,rated 0.0 mm Impeller Material
Impeller diameter,maximum 0.0 mm Pressure Data
Impeller diameter,minimum 0.0 mm Maximum working requested 0.00 MPa
Efficiency 0.00 % Maximum allowable working pressure 0.00 MPa
NPSH required/margin required 0.0 m Maximum allowable suction pressure limit 0.00 MPa
Special speed/Suction special speed m Hydrostatic test pressure 0.00 MPa
MCSF 0.0 m3/h
Driver&Power Data
Head Maximum,rated diameter 0.0 m
Driver sizing specification
Head rise to shut off -1.#J %
Margin over specification 0.0
Flow,best eff. Point(BEP) 0.0 m3/h
Service factor
Flow ratio(rated/BEP) -1.#J %
Power,hydraulic 0.00 kW
Head ratio(rated/Max Diameter) -1.#J %
Power,rated 0.00 kW
Diameter ratio(rated/max) -1.#J %
Power,maximum 0.00 kW
Viscous coefficients(CQ/CH/CE) 1.0/1.0/1.0
Min recommended driver 0.00 kW
Selection status Acceptable

P(kW)
0.5

0.4

0.3

0.2

0.1
0.0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

H(m) Effi(%)
1.0 0.00mm
100

0.9

0.8 80

0.7

0.6 60

0.5

0.4 40

0.3

0.2 20

0.1
0.0 0.00mm 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Q(m3/h)
NPSH(m)
0.5
0.4
0.3
0.2
0.1
0.0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

You might also like