Scribd
Upload
54 views

Plastic Encapsulated Microcircuits

A PEM is a type of organic packaging material used to provide environmental protection for electronic components such as microchips. PEMs are in direct contact with active elements and offer advantages over metal/ceramic packaging like greater availability, lighter weight, and lower cost. However, concerns exist around PEMs' long-term reliability in harsh environments due to a lack of reliability data and testing procedures, especially for military applications. Common PEM package types include SOT, SOIC, QFP, QFN, PLCC, DIP, BGA, CSP, and D-Pak.

Uploaded by

munnizza64
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Plastic Encapsulated Microcircuits

A PEM is a type of organic packaging material used to provide environmental protection for electronic components such as microchips. PEMs are in direct contact with active elements and offer advantages over metal/ceramic packaging like greater availability, lighter weight, and lower cost. However, concerns exist around PEMs' long-term reliability in harsh environments due to a lack of reliability data and testing procedures, especially for military applications. Common PEM package types include SOT, SOIC, QFP, QFN, PLCC, DIP, BGA, CSP, and D-Pak.

Uploaded by

munnizza64
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Plastic Encapsulated Microcircuit (PEM)

A PEM’s official definition is organic packaging material, either transfer molded or


coated, for environmental protection. This material is in direct contact with the active
element or an inorganic barrier layer. This is in contrast to metal or ceramic packaging,
which has a hermetically sealed cavity and no active element or organic barrier
interface with the package material. The vast majority of PEM usage has been in
commercial, telecommunication, automotive and industrial applications.

The major advantages that can be gained from their use are:

 Greater availability (especially surface mount packaging)


 Lighter weight
 Lower cost (high volume procurement)

Concerns associated with their increased usage, especially military, include:

 Uncertainty regarding their long term reliability in harsh environments


 Lack of reliability/quality assurance procedures
 Insufficient military environment reliability data (operating and storage)
 Existing OEM procurement expertise

To the left and below you


will see two views of what
the internal construction of
a PEM might look like.
Every PEM should have
these basic components.
They may look a little
different depending on the
type of PEM device you
are working with.

AcousTech, Inc. 11623 Coldwater Road, Ste 101 Fort Wayne, IN 46845 260.637.2167
In each of these images you see:

1) Leadframes: the metal


structure inside a chip package
that carry signals from the die to
the outside

2) Bondwires/wires: thin metal


wire that carries the
signals/current from the
leadframes to the die/integrated
circuit (IC)

3) Die/integrated ciricuit: is a set of electronic circuits on one small plate ("chip") of


semiconductor material, normally silicon

4) Die attach: the material that attaches the die to the paddle/heatsink for support,
normally some kind of adhesive epoxy

5) Paddle/heatsink: the main purpose is to support and hold all the components together
before and while the plastic is injection molded around it (a heatsink is an exposed
paddle designed to conduct the heat generated by the die out of the package)

6) Molding compound: the plastic material that is used to seal in place and protect all of
the internal components

AcousTech, Inc. 11623 Coldwater Road, Ste 101 Fort Wayne, IN 46845 260.637.2167
There are many different types of PEM’s. Some examples are listed below.

SOT: Small Outline Transistor

SOIC: Small Outline Integrated Circuit

Variations of this part type include TSOP (thin small


outline package), SSOP (shrink small outline package),
TSSOP (thin shrink small outline package), and MSOP
(micro small outline package)

QFP: Quad Flat Package

Variations of this part type include TQFP (thin quad flat


package) and PQFP (plastic quad flat package)

QFN: Quad Flat No-lead Package

Variations of this part type include TQFN (thin quad flat


no-lead package) and DFN (dual flat no-lead package)

AcousTech, Inc. 11623 Coldwater Road, Ste 101 Fort Wayne, IN 46845 260.637.2167
PLCC: Plastic Leaded Chip Carrier

DIP: Dual In-line Package

Can also be called a PDIP (plastic dual in-line package)

BGA: Ball Grid Array

Variations of this part type include FBGA (fine ball grid


array)

CSP: Chip Scale Package

D-Pak: Discrete Package

Variations of this part type include D2Pak (larger


version of the dpak) and TO (largest versions of a dpak)

AcousTech, Inc. 11623 Coldwater Road, Ste 101 Fort Wayne, IN 46845 260.637.2167

You might also like