Scribd
Upload
66 views

Exercises On Projections of Planes

This document contains 10 practice problems involving drawing multi-view projections of various geometric shapes including plates, laminae, and solids. The shapes include circles, squares, rectangles, hexagons, and a set square. Various orientations are specified such as edges or surfaces being parallel, perpendicular or at angles to reference planes. Dimensions and inclinations are provided for each shape.

Uploaded by

Mohd Sattar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
66 views

Exercises On Projections of Planes

This document contains 10 practice problems involving drawing multi-view projections of various geometric shapes including plates, laminae, and solids. The shapes include circles, squares, rectangles, hexagons, and a set square. Various orientations are specified such as edges or surfaces being parallel, perpendicular or at angles to reference planes. Dimensions and inclinations are provided for each shape.

Uploaded by

Mohd Sattar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Practice problems

1. A thin circular plate of diameter 50, having its plane vertical and inclined at 450 to VP. Its centre is 45
from both the planes. Draw its projections.
2. Draw the projections of a regular hexagon of 30 side, having one of its sides in the H.P. and inclined
at 600 to the V.P, and its surface making an angle of 450 with the H.P.
3. A square lamina ABCD of 50 side, has its corner A in HP and diagonal AC inclined at 35 0 to H.P.
and diagonal DB inclined at 450 to V.P and parallel to H.P. Draw its projections.
4. A hexagonal lamina of 20 side rests on one of its corners on HP. The diagonal passing through this
corner is inclined at 450 to HP. The lamina is then rotated through 900 such that the top view of this
diagonal is perpendicular to the VP and the surface is still inclined at 450 to HP. Draw the projections
of the lamina.
5. A thin 300-600 set square has its longest edge of 45 long is in VP and inclined at 30 0 to HP. Its
surface makes an angle of 450 with VP. Draw its projections.
6. A thin rectangular plate of side 60 X 30 has its shortest edge in VP and inclined at 30 0 to HP. Project
its top view, if its front view is a square of side 30. Determine the inclination of the plane with VP.
7. A circular plate of negligible thickness and 50 diameter appears as an ellipse in the front view, having
its major axis 50 long and minor axis 30 long. Draw its top view when the major axis of the ellipse is
horizontal. Determine the inclination of the plane with VP.
8. A circular lamina of 60m diameter rests on HP on a point of its circumference. The lamina is inclined
to HP, such that the top view of it is an ellipse of minor axis 35. The top view of the diameter through
that point makes 450 with VP. Draw the projections and determine the angle made by the lamina with
HP.
9. A semi-circular plate of 80 diameter has its straight edge in the V.P. and inclined at 45 0 to the HP.
The surface of the plate makes an angle of 300 with the V.P. Draw its projections.
10. Draw the projections of a circle of 50 diameter resting in the H.P. on a point A on the circumference
its plane inclined at 450 to the H.P. and the top view of the diameter through A making 300 with the
VP

You might also like