Scribd
Upload
645 views1 page

SUS 316 Material Properties PDF

AK Steel 316 Austenitic Stainless steel contains molybdenum which increases corrosion resistance and strength at high temperatures. It has a density of 7.99 g/cc, a tensile strength of 579 MPa, and an elongation at break of 50%. AK Steel 316 has a thermal conductivity of 16.2 W/m-K at 100°C and melts within the range of 1371-1399°C.

Uploaded by

Yudo Ardian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
645 views1 page

SUS 316 Material Properties PDF

AK Steel 316 Austenitic Stainless steel contains molybdenum which increases corrosion resistance and strength at high temperatures. It has a density of 7.99 g/cc, a tensile strength of 579 MPa, and an elongation at break of 50%. AK Steel 316 has a thermal conductivity of 16.2 W/m-K at 100°C and melts within the range of 1371-1399°C.

Uploaded by

Yudo Ardian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AK Steel 316 Austenitic Stainless steel http://www.matweb.com/search/datasheet_print.aspx?matguid=5edc39d...

AK Steel 316 Austenitic Stainless steel


Categories: Metal; Ferrous Metal; Austenitic; Stainless Steel; T 300 Series Stainless Steel

Material AK Steel 316 contains molybdenum. This addition increases general corrosion resistance, improves
Notes: resistance to pitting from chloride ion solutions, and provides increased strength at elevated
temperatures.

Information provided by AK Steel

Key Words: UNS S31600


Vendors: Click here to view all available suppliers for this material.

Please click here if you are a supplier and would like information on how to add your listing to this
material.

Physical Properties Metric English Comments


Density 7.99 g/cc 0.289 lb/in³

Mechanical Metric English Comments


Properties
Hardness, Rockwell 79 79
B
Tensile Strength, 579 MPa 84000 psi
Ultimate
Tensile Strength, 290 MPa 42100 psi
Yield @Strain 0.200 % @Strain 0.200 %
Elongation at Break 50 % 50 % in 2 inches
Tensile Modulus 193 GPa 28000 ksi
Poissons Ratio 0.25 0.25 Calculated
Shear Modulus 77.0 GPa 11200 ksi torsion

Electrical Properties Metric English Comments


Electrical Resistivity 0.0000740 ohm-cm 0.0000740 ohm-cm
Magnetic <= 1.02 <= 1.02 H = 200 Oersted, Annealed
Permeability

Thermal Properties Metric English Comments


CTE, linear 16.0 µm/m-°C 8.89 µin/in-°F
@Temperature 0.000 - 100 °C @Temperature 32.0 - 212 °F
19.9 µm/m-°C 11.1 µin/in-°F
@Temperature <=871 °C @Temperature <=1600 °F
Specific Heat 0.500 J/g-°C 0.120 BTU/lb-°F
Capacity @Temperature 0.000 - 100 °C @Temperature 32.0 - 212 °F
Thermal Conductivity 16.2 W/m-K 112 BTU-in/hr-ft²-°F
@Temperature 100 °C @Temperature 212 °F

21.4 W/m-K 149 BTU-in/hr-ft²-°F


@Temperature 500 °C @Temperature 932 °F
Melting Point 1371 - 1399 °C 2500 - 2550 °F
Solidus 1371 °C 2500 °F
Liquidus 1399 °C 2550 °F

Component Metric English Comments


Elements Properties
Carbon, C <= 0.080 % <= 0.080 %

1 of 2 8/7/2019, 02:59

You might also like