APD888C

AKSA Power Generation has been producing industrial generator sets with an innovative compact design and
excellence in quality for over 30 years. AKSA has been providing reliable power through three main production plants
and over 15 branch offices worldwide.

General Characteristics

Model Name APD888C Frequency / PF 50Hz, 1500 rpm, 0.8pf

Engine Make & Model Cummins KTA38G2B Alternator Make Stamford / Aksa

Control Panel Model DSE 7320 Base Frame / Enclosure AKSA ASM9

Genset Rating – 50Hz, 1500rpm, 0.8pf

Standby
Engine Alternator Voltage Standby Power Prime Power
Current

HCI634G 888kVA 800kVA 1281A

KTA38G2B 400/230V
AK7650 888kVA 800kVA 1281A
Stand-by Power (Maximum): Power available at variable load in the event of main power network failure. No over load is permitted.
Prime Power: Power available at variable load in lieu of a main power network. Overload of 10% is permitted for 1 hour in every 12 hours of operation.
The above ratings represent the engine performance capabilities to conditions specified in accordance with ISO 8528/5 & ISO3046.
Derating may be required for conditions outside of the test conditions.

Codes & Standards

The Generator set is designed and manufactured in a facility certified to ISO9001 standards.

The Generator set is designed and manufactured in a facility certified to ISO14001:2015 standards.

AKSA Power Generation provides single source responsibility for the generator set & accessories.

The generator set, with its components, are prototype tested and production tested

*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

www.aksausa.com www.aksalatam.com
 APD888C

Engine Data Electric System

Manufacturer Cummins Engine Cranking Motor 24V

Model KTA38-G2B Engine Battery Charge System 35A, Negative Ground

Displacement & Cylinders 37.8L / 12 Cylinders

Battery Qty, Rating, CCA 4 x 150Ah
Engine Speed 1500rpm

Engine Standby Power 789 kW / 1057 HP Cooling System

Engine Prime Power 711 kW / 953 HP Coolant Capacity 237 L

Aspiration Turbocharged&Aftercooled Max Coolant Friction Head

35 kPa
External to Engine -1500rpm
Compression Ratio 14.5 : 1
Thermostat Range 82 – 93 ˚C
Bore / Stroke 159 mm / 159 mm
Min Allowable Pressure Cap 69 kPa
BMEP 5114 Kpa
Max Top Tank Temperature 104 ˚C
Piston Speed 7.9 m/s

Friction Horsepower 86 kW Exhaust System

Engine Water Flow 19.6 litre/sec. Max Back Pressure 10 kPA

Intake Air Flow 1126 litre/sec. Manifold Insulation Not Acceptable

Exhaust Gas Flow 3225 litre/sec. Turbocharger Insulation Not Accepatable

Exhaust Gas Temperature 536 ˚C

Fuel System Air Intake System

Direct Injection Cummins 6.25 kPA (Dirty Filter)

Type of Injection Max Intake Air Restriction
PT 3.73 kPA (Clean Filter)
102 mmHg (Clean Filter)
Max Restriction to Fuel Pump
203 mmHg (Dirty Filter) Min Dirt Holding Capacity 53 g-L/s

Max Fuel Flow to Injection

606 litre/hr Max Allowable Intake Air Temp
Pump

Max Allowable Head on Injector

102 mmHg
Return Line

Fuel Consumption Lubrication System

Standby Power (110%) 184 L/h Max Oil Temperature 121 ˚C

Prime Power (100%) 167 L/h Oil Capacity : High - Low 114 – 87 L

Prime Power (75%) 128 L/h Max Oil Consumption

Total System Capacity 135 L

Prime Power (50%) 90 L/h

Prime Power (25%) 53 L/h

*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

www.aksausa.com www.aksalatam.com
 APD888C

Alternator Data Controller Data

Manufacturer Stamford Manufacturer DSE

Standards BS EN 60034 Model 7320

Control System PMG Type Auto Mains Failure Control

A.V.R. MX321
Controller Features & Benefits
Voltage Regulation ± 0.5 %
Microprocessor controlled
Insulation System Class H

License free PC Software

Protection IP23

IP65 rating offers increased resistance to water ingress

Rated Power Factor 0.8

Modules can be integrated to building management systems

Stator Winding Double Layer Concentric

Real time clock provides accurate event log

Winding Pitch Two Thirds

Four line back-lit LCD text display

Winding Leads 12

Five key menu navigation

Telephone Interference THF < 2 %

Waveform Distortion No Load < 1.5 % Front panel editing with PIN protection

Maximum Over speed 2250 rev/min Support up to three remote display modules

Configurable timers and alarms

Battery Charger & Electrical System Data
Multiple date and timer scheduler
Manufacturer AKSA
Integral PLC editor
Model SmartGen BAC06A
‘Protections disabled’ feature
Input Voltage 100V ~ 250V AC
kW & kVAr protection
Output Voltage / Current 27,6V DC / 3A
Reverse power (kW & kVAr) protection

Power monitoring (kWh, kVAr, kVAh, kVArh)

Jacket Water Heater Data

Load switching (load shedding and dummy load outputs)

Manufacturer AKSA

Unbalanced load protection

Model HTR4000W 100-120F

Independent Earth Fault trip

Input Voltage Based on Genset Voltage

Fully configurable via DSE Configuration Suite PC Software

Power 4000W x 2

SCADA monitoring via DSE Configuration Suite PC Software

*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

www.aksausa.com www.aksalatam.com
 APD888C

Enclosure Features

 Heavy Duty Steel Structure

 E-Stop on Enclosure

 Control Panel Eliminated from Engine Vibrations

 Control Panel Window

 Plastic Covered Corrosion Resistant Locks & Hinges

 Internally Mounted Exhaust System with Rain Cap

 Coolant Fill Cap

 Base Frame Lifting Hooks

 Base Fuel Tank

 Easy Access for Maintenance

 Sound Absorb High Density Foam

Open Skid Gen-Set Dimensions

Length 4370 mm

Width 2060 mm

Height 2397 mm

Dry Weight 7350 kg

Tank Capacity 900 L

Enclosed Gen-Set Dimensions

Length 5800 mm

Width 2272 mm

Height 2554 mm

Dry Weight 9000 kg

Tank Capacity 630 L

Sound Pressure @ 7 meters 82 dB(A)

*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

www.aksausa.com www.aksalatam.com
 APD888C

Standard Features & Accessories Optional Accessories

 Heavy Duty Steel Base Frame  Main Line CB (3 / 4 Poles)

 Integral Fuel Tank  Anti-condensation Heater

 PMG w/MX321 AVR  Stand Alone Bulk Fuel Tank

 Engine Jacket Water Heater

 Fuel Level Display & Alarm on Controller

 Battery and Battery Rack

 Low / High Fuel Alarms

 Battery Charger
 Fuel Water Separator Filter

 Battery Restraint
 Auto Fuel Fill Control System
 Anti Vibration Pads between Engine/Alternator & Base Frame
 Oil Temperature Display on Controller
 Residential Grade Silencer Inside Enclosure
 Manual Speed Adjust Rheostat
 Industrial Grade Silencer Set for Open Skid Sets
 Manual Voltage Adjust Rheostat
 Sound Absorb Foam for Enclosure
 Remote Annunciator Panel
 Air Inlet & Outlet Rodent Guards
 Remote Control & Monitoring Panel
 Oil Drain Valve
 Advanced SMS Messaging
 Coolant Drain Valve
 Control Panel Heater
 Flex Fuel Lines
 Battery Disconnect Switch
 Air Filter Restriction Gauge

 Battery Heater
 Engine Manifold Cover

 10A Battery Charger

 Turbocharger Cover

 Battery Charge Ammeter

 Protection Covers for Rotating Parts

 Exhaust Insulation Cover  Tool Kit for Maintenance

 Control Panel Window  Power Plug Outlet Kit

 Operations Manual  Automatic Transfer Panel (ATS) – Contactor Design

 24 Months / 2000 hours Limited Standby Warranty  Automatic Transfer Panel (ATS) – Changeover Design

*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

Aksa Power Generation USA Aksa Power Generation Aksa Power Generation LATAM
371 Exchange Street, West Monroe, LA 71292 USA & LATAM 12320 NW 116th Street, Miami, FL 33178
T: + 1 318 8558377 a member of T: + 1 786 4936857
[email protected] [email protected]
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.

www.aksausa.com www.aksalatam.com