Scribd
Upload
1K views

Programing Olt

olt

Uploaded by

William more
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Programing Olt

olt

Uploaded by

William more
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

MA5608T>enable

MA5608T#config

MA5608T(config)#display ont autofind all


Failure: The automatically found ONTs do not exist

MA5608T(config)#display ont autofind all


Failure: The automatically found ONTs do not exist

MA5608T(config)#display ont autofind


{ all<K>|conflict-check<K>|time<K> }:all

Command:
display ont autofind all
------------------------------------------------------------------------
Number : 1
F/S/P : 0/0/0
ONT NNI type : 1G/1G
ONT MAC : 5CC7-D7FE-A868
Password :
Loid : ztepon
Checkcode : ztepon
VendorID : XPON
OUI version : CTC3.0
ONT model : LXP1
ONT extended model : LXP125E
ONT software version: SFUV1.0.0B06
ONT hardware version: V1.0
ONT autofind time : 2019-08-28 19:52:13+08:00
--------------------------------------------------------------------------
The number of EPON autofind ONT is 1

MA5608T(config)#interface epon 0/0

MA5608T(config-if-epon-0/0)#ont confirm 0 ontid 0 mac-auth 5CC7-D7FE-A868 oam ont-lineprofi


le-id 10 ont-srvprofile-id 10 desc "test"
Failure: The type of the ONT mismatches the type of the ONT line profile

MA5608T(config-if-epon-0/0)#display ont-lineprofile epon


{ all<K>|profile-id<K>|profile-name<K> }:

Command:
display ont-lineprofile epon
^
% Incomplete command, the error locates at '^'

MA5608T(config-if-epon-0/0)#display ont-lineprofile epon


{ all<K>|profile-id<K>|profile-name<K> }:profile-id 10

Command:
display ont-lineprofile epon profile-id 10
Failure: The input profile type is incorrect

MA5608T(config-if-epon-0/0)#display current-configuration
[MA5600V800R013: 5900]
#
[epon]
<epon-0/0>
interface epon 0/0
port 0 ont-auto-find enable
port 1 ont-auto-find enable
port 2 ont-auto-find enable
port 3 ont-auto-find enable
port 4 ont-auto-find enable
port 5 ont-auto-find enable
port 6 ont-auto-find enable
port 7 ont-auto-find enable
port 8 ont-auto-find enable
port 9 ont-auto-find enable
port 10 ont-auto-find enable
port 11 ont-auto-find enable
port 12 ont-auto-find enable
port 13 ont-auto-find enable
port 14 ont-auto-find enable
port 15 ont-auto-find enable
#
return

MA5608T(config-if-epon-0/0)#display current-configuration
[MA5600V800R013: 5900]
#
[epon]
<epon-0/0>
interface epon 0/0
port 0 ont-auto-find enable
port 1 ont-auto-find enable
port 2 ont-auto-find enable
port 3 ont-auto-find enable
port 4 ont-auto-find enable
port 5 ont-auto-find enable
port 6 ont-auto-find enable
port 7 ont-auto-find enable
port 8 ont-auto-find enable
port 9 ont-auto-find enable
port 10 ont-auto-find enable
port 11 ont-auto-find enable
port 12 ont-auto-find enable
port 13 ont-auto-find enable
port 14 ont-auto-find enable
port 15 ont-auto-find enable
#
return

MA5608T(config-if-epon-0/0)#quit

MA5608T(config)#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:

Command:
display current-configuration
[MA5600V800R013: 5900]
#
[sysmode]
<sysmode>
switch adsl mode to rfc2662 vdsl mode to tr129
xpon mode switch-to profile-mode
voice-spec set vag-num 8
voice-spec set sip-account-num 2048
protocol support h248
system ex-mode backup
router mode basic
#
[global-config]
<global-config>
trap filter event condition id 0x0a300013
trap filter event condition id 0x0a300015
resource threshold mem 94
dba-profile add profile-id 10 profile-name "PPPOE-VOIP-TV" type4 max 1024000
ont-srvprofile epon profile-id 13 profile-name "ztepon"
ont-port pots 1 eth 1
port vlan eth 1 transparent
commit
ont-srvprofile gpon profile-id 10 profile-name "LXP1"
ont-port pots 1 eth 1
port vlan eth 1 transparent
commit
ont-srvprofile gpon profile-id 11 profile-name "LXP125E"
ont-port pots 1 eth 1
port vlan eth 1 transparent
commit
ont-srvprofile gpon profile-id 12 profile-name "HG8310"
ont-port pots 1 eth 1
port vlan eth 1 transparent
commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
tcont 0 dba-profile-id 2
tcont 1 dba-profile-id 0
commit
quit
ont-lineprofile gpon profile-id 10 profile-name "PPPOE-IPtv"
tcont 4 dba-profile-id 10
tcont 5 dba-profile-id 10
tcont 6 dba-profile-id 10
gem add 1 eth tcont 4
gem add 2 eth tcont 5
gem add 3 eth tcont 6
gem mapping 1 0 vlan 100
gem mapping 2 0 vlan 200
gem mapping 3 0 vlan 300
commit
quit
#
[device-config]
<device-config>
board add 0/0 H803EPFD
board add 0/4 H801MPWD
board add standby sub0 CPCA
#
[public-config]
<public-config>
snmp-agent local-engineid 800007DB03B44326488644A1
#
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 200 smart
vlan 300 smart
port vlan 100 0/2 0
port vlan 200 0/2 0
port vlan 300 0/2 0
#
[mcu]
<mcu-0/2>
interface mcu 0/2
speed 0 1000
speed 1 1000
speed 2 1000
speed 3 1000
#
[epon]
<epon-0/0>
interface epon 0/0
port 0 ont-auto-find enable
port 1 ont-auto-find enable
port 2 ont-auto-find enable
port 3 ont-auto-find enable
port 4 ont-auto-find enable
port 5 ont-auto-find enable
port 6 ont-auto-find enable
port 7 ont-auto-find enable
port 8 ont-auto-find enable
port 9 ont-auto-find enable
port 10 ont-auto-find enable
port 11 ont-auto-find enable
port 12 ont-auto-find enable
port 13 ont-auto-find enable
port 14 ont-auto-find enable
port 15 ont-auto-find enable
#
[emu-config]
<emu-config>
emu add 0 fan 0 1 "H831FCBB"
emu add 1 h801pmu 0 0 "H801PMUB"
#
[bbs-config]
<bbs-config>
link-aggregation 0/2 0 egress-ingress workmode lacp-static
link-aggregation add-member 0/2/0 0/2 1
#
[config]
<config>
mpls label start 8192
#
[prevlanif]
<prevlanif>
interface vlanif100
interface vlanif200
interface vlanif300
#
[vlanif]
<vlanif100>
interface vlanif100
ip address 192.168.2.1 255.255.255.0 description "pppoe"
#
<vlanif200>
interface vlanif200
ip address 172.16.1.2 255.255.255.0 description "vlan_200_management"
#
<vlanif300>
interface vlanif300
ip address 10.15.20.120 255.255.255.0 description "vlan_300_iptv"
#
[meth]
<meth0>
interface meth0
ip address 192.168.1.254 255.255.255.0
#
[null]
<null0>
interface null0
#
[aaa]
<aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
[lacp-config]
<lacp-config>
link-aggregation lacp-key 0/2/0 1
#
return

MA5608T(config)#

MA5608T(config)#

MA5608T(config)#

Please check whether system data has been changed, and save data in time

Configuration console time out, please retry to log on


Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 192.168.1.9 ssh
Login Time : 2019-08-28 19:50:48+08:00
Logout Time : 2019-08-28 20:11:16+08:00
-----------------------------------------------------------------------------

User root has used a default password. Change the password in time.

MA5608T>enable

MA5608T#config

MA5608T(config)#ont-lineprofile gpon profile-id 14 profile-name "THINKTIDES"

MA5608T(config-gpon-lineprofile-14)#tcont 4 dba-profile-id 10

MA5608T(config-gpon-lineprofile-14)#tcont 5 dba-profile-id 10

MA5608T(config-gpon-lineprofile-14)#tcont 6 dba-profile-id 10

MA5608T(config-gpon-lineprofile-14)#gem add 1 eth tcont 4


{ <cr>|cascade<K>|downstream-priority-queue<K>|encrypt<K>|gem-car<K>|priority-queue<K> }:

Command:
gem add 1 eth tcont 4

MA5608T(config-gpon-lineprofile-14)#gem add 2 eth tcont 5


{ <cr>|cascade<K>|downstream-priority-queue<K>|encrypt<K>|gem-car<K>|priority-queue<K> }:

Command:
gem add 2 eth tcont 5

MA5608T(config-gpon-lineprofile-14)#gem add 3 eth tcont 6


{ <cr>|cascade<K>|downstream-priority-queue<K>|encrypt<K>|gem-car<K>|priority-queue<K> }:

Command:
gem add 3 eth tcont 6

MA5608T(config-gpon-lineprofile-14)#gem mapping 1 0 vlan 100


{ <cr>|flow-car<K>|priority<K>|transparent<K> }:

Command:
gem mapping 1 0 vlan 100

MA5608T(config-gpon-lineprofile-14)#gem mapping 2 0 vlan 200


{ <cr>|flow-car<K>|priority<K>|transparent<K> }:

Command:
gem mapping 2 0 vlan 200

MA5608T(config-gpon-lineprofile-14)#gem mapping 3 0 vlan 300


{ <cr>|flow-car<K>|priority<K>|transparent<K> }:

Command:
gem mapping 3 0 vlan 300

MA5608T(config-gpon-lineprofile-14)#COMMIT

MA5608T(config-gpon-lineprofile-14)#QUIT

MA5608T(config)#ont confirm0ontid0mac-auth5CC7-D7FE-A868oamont-lineprofile-id10ont-srvprofi
le-id10desc"test"
^
% Unknown command, the error locates at '^'

MA5608T(config)#INTERFACE EPON 0/0

MA5608T(config-if-epon-0/0)#ont confirm 0 ontid 0 mac-auth 5CC7-D7FE-A868 oam ont-lineprofi


le-id 14 ont-srvprofile-id 12 desc "test"
Failure: This automatically found ONT does not exist

MA5608T(config-if-epon-0/0)#ont confirm 0 ontid 0 mac-auth 5CC7-D7FE-A868 oam ont-lineprofi


le-id 14 ont-srvprofile-id 12 desc "test"
Failure: The type of the ONT mismatches the type of the ONT line profile

MA5608T(config-if-epon-0/0)#

Please check whether system data has been changed, and save data in time

Configuration console time out, please retry to log on

Huawei Integrated Access Software (MA5608T).


Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 192.168.1.9 ssh
Login Time : 2019-08-28 20:25:25+08:00
Logout Time : 2019-08-28 20:38:01+08:00
-----------------------------------------------------------------------------

User root has used a default password. Change the password in time.

MA5608T>enabe
^
% Unknown command, the error locates at '^'

MA5608T>en
Huawei Integrated Access Software (MA5608T).
Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 192.168.1.9 ssh
Login Time : 2019-08-28 20:40:28+08:00
Logout Time : 2019-08-28 20:41:01+08:00
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
User fail login information:
-----------------------------------------------------------------------------
Last Access Type : SSH
Last IP-Address : 192.168.1.9 ssh
Last Login Time : 2019-08-28 20:41:12+08:00
Login Failure Times : 2
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
All user fail login information:
-----------------------------------------------------------------------------
Access Type IP-Address Time Login Times
-----------------------------------------------------------------------------
SSH 192.168.1.9 ssh 2019-08-28 20:41:12+08:00 2
-----------------------------------------------------------------------------

User root has used a default password. Change the password in time.

MA5608T>

MA5608T>

MA5608T>

Huawei Integrated Access Software (MA5608T).


Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved.

-----------------------------------------------------------------------------
User last login information:
-----------------------------------------------------------------------------
Access Type : SSH
IP-Address : 192.168.1.9 ssh
Login Time : 2019-08-28 20:41:19+08:00
Logout Time : 2019-08-28 20:41:45+08:00
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
All user fail login information:
-----------------------------------------------------------------------------
Access Type IP-Address Time Login Times
-----------------------------------------------------------------------------
SSH 192.168.1.9 ssh 2019-08-28 20:41:12+08:00 2
-----------------------------------------------------------------------------

User root has used a default password. Change the password in time.
MA5608T>enable

MA5608T#config

MA5608T(config)#display ont autofind all


------------------------------------------------------------------------
Number : 1
F/S/P : 0/0/0
ONT NNI type : 1G/1G
ONT MAC : 5CC7-D7FE-A868
Password :
Loid : ztepon
Checkcode : ztepon
VendorID : XPON
OUI version : CTC3.0
ONT model : LXP1
ONT extended model : LXP125E
ONT software version: SFUV1.0.0B06
ONT hardware version: V1.0
ONT autofind time : 2019-08-28 20:32:27+08:00
--------------------------------------------------------------------------
The number of EPON autofind ONT is 1

MA5608T(config)#interface epon 0/0

MA5608T(config-if-epon-0/0)#ont confirm 0 ontid 0 mac-auth 5CC7-D7FE-A868 oam ont-lineprofi


le-id 14 ont-srvprofile-id 12 desc "prueba"
Failure: The type of the ONT mismatches the type of the ONT line profile

MA5608T(config-if-epon-0/0)#

Please check whether system data has been changed, and save data in time

Configuration console time out, please retry to log on

You might also like