Scribd
Upload
49 views

Ricoh MP 201SPF Quick Guide

The document provides instructions for basic functions of the Ricoh MP 201SPF printer such as making copies, sending faxes, and scanning documents. It explains how to make single or double-sided copies and change copy settings like size. For faxing, it describes how to send faxes, program speed dials, and send double-sided documents. The scanning section provides directions for sending scans to email or folders, scanning double-sided pages, and changing file formats. It also outlines how to program email addresses in the address book.

Uploaded by

alimoro1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Ricoh MP 201SPF Quick Guide

The document provides instructions for basic functions of the Ricoh MP 201SPF printer such as making copies, sending faxes, and scanning documents. It explains how to make single or double-sided copies and change copy settings like size. For faxing, it describes how to send faxes, program speed dials, and send double-sided documents. The scanning section provides directions for sending scans to email or folders, scanning double-sided pages, and changing file formats. It also outlines how to program email addresses in the address book.

Uploaded by

alimoro1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Ricoh MP 201SPF Quick Guide

Originals should be face-up in the document feeder, face-down on glass

Push the Clear Modes button before carrying out jobs

Copy

BASIC COPY
1. Select the Copy button
2. Place your originals in the document feeder
3. Select the number of copies using the blue number keys
4. Press the Sort button if you wish to have your copies collated or sorted.
5. Press the green Start button

© Page 1 of 5

This manual downloaded from http://www.manualowl.com


2 SIDED COPIES (DUPLEX)
1. Place your originals in the document feeder
2. Press the Duplex button
3. Press the arrow up or down keys to select style of 2 sided you would like
4. Press the OK key to confirm your selection, the word Programmed will appear at the
top of the display
5. Press the Start button

2 SIDED ORIGINALS INTO 1 SIDED COPIES


1. Place your originals in the document feeder
2. Press the Combine/Series button
3. Press the arrow up or down keys to the last screen and ensure 2 sided originals to 1
sided copy is highlighted
4. Press the OK key to confirm your selection, the word Programmed will appear at the
top of the display
5. Press the Start button

REDUCE OR ENLARGE COPIES


1. Place your originals in the document feeder or on the glass
2. Press the R/E button on the panel display
3. Press the arrow button below R/E. Press this button until you have highlighted the
option you would like
4. Press the OK button to confirm your selection
5. Press the Start button

Fax
SEND A FAX
1. Select the Facsimile button
2. Dial the number using the blue numeric key pad or press the pre programmed button(s)
on the left hand side
3. Place your originals in the document feeder or on the glass
4. Press the Start button
If you have placed your originals on the glass, once you have dialed the number and pressed the Start
button, the display will start a 60 second countdown. This is allowing you to change the original, place

© Page 2 of 5

This manual downloaded from http://www.manualowl.com


the next original and press the Start button for the remaining originals. If you only have a one page
document, press the pound key “#” and the fax machine will start sending the document immediately.

SEND FAX - 2 SIDED ORIGINAL


1. Press Tx Mode (on the panel)
2. Use the arrow keys to select 2 Sided Tx, press OK
3. Use the arrow keys to select 2 Sided from the first page OR 1 Sided from the first page
if you are using a cover page that is single sided¨or other selection, press OK, press esc
when done
4. Dial the number using the numeric key pad or press the pre programmed button(s) on
the left hand side
5. Place your originals in the document feeder
6. Press the Start button

Note: when sending a fax you can look up the pre-programmed fax numbers by pressing the Check
Destination button, choose one of the search options (i.e. list) and select it for sending, press Start

PROGRAM FAX NUMBERS IN THE ADDRESS BOOK

1. Press the User Tools /Counter button


2. Select System Settings by using the arrow keys and press OK
3. Arrow down and select Administration Tools press OK
4. Arrow down and select Address Book Management press OK
5. Select Program/Change to program or change an existing quick dial and press OK
6. The first available quick dial location will appear or make your selection from (001-032) by
using the numeric keypad and press OK.
7. Enter the name using the quick dial keypad, (example: using the speed dial keypad on the
left hand side press the 01 button once for the “A” or twice for a “B” or three times for a
“C” use the arrow keys near the display to cursor over. Use the 02 button for D E or F)
8. Press OK.
9. Select Details
10. Select Fax Setting then press OK
11. Enter the fax number using the blue numeric keypad, press OK
12. Press END, press OK

© Page 3 of 5

This manual downloaded from http://www.manualowl.com


To continue programming, continue from step 5 Address Book Management

OR to exit, press User Tools button

DELETE FAX NUMBERS IN THE ADDRESS BOOK


1. Press the User Tools /Counter button
2. Select System Settings by using the arrow keys and press OK
3. Arrow down and select Administration Tools press OK
4. Arrow down and select Address Book Management press OK
5. Select Delete to program or change an existing quick dial and press OK
6. Select the number you want to delete, press OK
7. Press Yes to confirm
8. Press User Tools button to exit

Note: you may get a message on the panel: “Settings have been updated. The selected
dest./functions have been cancelled Just press Exit on panel.

Scanning
SEND A DOCUMENT TO YOUR E-MAIL ADDRESS OR FOLDER

1. Press the Scanner button


2. Press the pre programmed button(s) on the left hand side where your e-mail address or
folder has been programmed or search for the address by clicking
3. Place your originals in the document feeder or on the glass
4. Press the Start button

If you have placed your originals on the glass, once you have dialed the number and
pressed the Start button, the display will start a 60 second countdown. This is allowing
you to change the original, place the next original and press the Start button for the
remaining originals. If you only have a one page document, press the pound key “#” and
the machine will start scanning the document immediately.

SCAN A 2 SIDED ORIGINAL


1. Press Options (in the panel)
2. Select Original Settings, press OK
3. Use the arrow keys to select 2 Sided Original
4. Press OK
5. Use the arrow keys to select “T to T” meaning Top to Top double sided like a book
OR “T to B” meaning Top to bottom like a calendar
6. Press OK

© Page 4 of 5

This manual downloaded from http://www.manualowl.com


7. Press the pre programmed button(s) on the left hand side where your e-mail
address or folder has been programmed
8. Place your originals in the document feeder
9. Press Start button

Note: when scanning you can look up the pre-programmed email addresses by pressing the Check
Destination button, choose one of the search options (i.e. list) and select it for sending, press Start

CHANGE THE FILE FORMAT WHEN SCANNING

1. Press Options in the panel


2. Use the arrow keys to select File type
3. Use the arrow keys to select PDF or “TIFF
4. Press OK
5. Press the pre programmed button(s) on the left hand side where your e-mail address or
folder has been programmed
6. Place your originals in the document feeder
7. Press Start button

HOW TO PROGRAM EMAIL ADDRESSES IN THE ADDRESS BOOK


1. Press the User Tools /Counter button
2. Select System Settings by using the arrow keys and press OK
3. Arrow down and select Administration Tools press OK
4. Arrow down and select Address Book Management press OK
5. Select Program/Change to program or change an existing quick dial and press OK
6. The first available quick dial location will appear or make your selection from (001-032) by
using the numeric keypad and press OK.
7. Enter the name using the quick dial keypad, (example: using the speed dial keypad on the
left hand side press the 01 button once for the “A” or twice for a “B” or three times for a
“C” use the arrow keys near the display to cursor over. Use the 02 button for D E or F) press
OK.
8. Select Details
9. Select E-mail Settings then press OK
10. Enter the e-mail address using the numeric keypad and then press OK
11. Select E-mail/Internet Fax Dest. and then press the OK key
12. Select On or Off to specify whether or not SMTP server is to be used
13. Press OK
14. Press End
15. Press OK
To continue programming, continue from step 5 Address Book Management or to exit, press User Tools
button

© Page 5 of 5

This manual downloaded from http://www.manualowl.com

You might also like