PRECISION MEASURING

INSTRUMENTS
 STANDARD GAGE

PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO

EVERYONE

The instruments of the STANDARD GAGE product line were created to satisfy the clients
on their query of reliable and economic measuring equipment, standing out on the market
for their excellent Price/Performance ratio.

All STANDARD GAGE products are checked individually by means of certified master
gauges and supplied with an inspection report attesting their conformity to technical
specifications.

Reliable and affordable, each precision tool can be used with every confidence for
efficient quality control.

QUALITY CONTROL

Following a rigorous procedure in the laboratory to ensure their quality level, each product
comes with an inspection report (see below).

2 www.standardgage.com
CONTENT
CALIPERS 04

MICROMETERS 08

SETTING RINGS 13

SETTING STANDARDS 13

DIAL GAUGES 14

LEVER INDICATORS 16

STANDS 17

SCRIBING GAUGES 18

ANGLE PROTRACTOR 20

LEVELS 20

SQUARES 21

GAUGE BLOCKS SETS 22

www.standardgage.com 3
 CALIPERS

ELECTRONIC
CALIPERS
3,2 Stainless steel beam and slider
13
16

With thumb roller

ø1.5

15.5
Direct metric/inch conversion
71,5

Precision to 0,02 mm (models 150 mm) or

40

0,04 mm (models 200 and 300 mm)

Resolution 0,01 mm/0,0005 in
Supplied in a suited case with inspection report
DIN 862

00534020

Order Measuring range Measuring jaws Thumb roller Price list

number (mm/in) (mm/in) €
00534020* 0 ÷ 150 0÷6 40 ✓ 53
00534021 0 ÷ 200 0÷8 50 ✓ 60
00534022 0 ÷ 300 0 ÷ 12 60 ✓ 99

ELECTRONIC WORKSHOP
CALIPERS, RS232
Stainless steel beam and slider
With fine adjustment
Direct metric/inch conversion
Preset mode
Hold feature
RS232 output
Precision to 0,02 mm (models 300 mm), 0,03 mm (models 600 mm)
or 0,04 mm (models 1000 mm)
Resolution 0,01 mm/0,0005 in
Supplied in a suited wooden case with inspection report
DIN 862

00534260
Order Measuring range Measuring jaws Price list
number (mm/in) (mm/in) €
00534260 0 ÷ 300 0 ÷ 12 90 180
00534261 0 ÷ 600 0 ÷ 24 100 270
00534262 0 ÷ 1000 0 ÷ 40 125 696

4 www.standardgage.com
CALIPERS

ELECTRONIC DEPTH
CALIPERS Stainless steel
Direct metric/inch conversion
Resolution 0,01 mm / 0005 in
Large LC display
Supplied in a suited case with inspection
DIN 862

00534101

Order Measuring range Reading Beam section Bridge length Price list
number (mm/in) (mm/in) (mm) (mm) €
00534101 0 ÷ 150 0÷6 0,01 ,0005 16 x 3,5 100 57
00534102 0 ÷ 200 0÷8 0,01 ,0005 16 x 3,5 100 61
00534103 0 ÷ 300 0 ÷ 12 0,01 ,0005 16 x 3,5 150 98

DEPTH CALIPERS WITH

VERNIER, METRIC
Finely graduated for precise measurement
Stainless steel
Satin-chrome scale and vernier backgrounds
Supplied in a suited case with inspection report
DIN 862

00514030
Order Measuring range Reading Beam section Bridge length Price list
number (mm) (mm) (mm) (mm) €
00514030 0 ÷ 150 0,02 11 x 4 100 46
00514032 0 ÷ 250 0,02 11 x 4 100 61

REMOVABLE BRIDGES FOR

DEPTH CALIPERS
Stainless steel
Available for all models
00564002
Order Description Price list
number €
00564002 Optional bridge, 180 mm 27
00564003 Optional bridge, 260 mm 35
00564004 Optional bridge, 320 mm 44

www.standardgage.com 5
 CALIPERS

VERNIER CALIPERS, METRIC

Finely graduated for precise measurement 227

Stainless steel

1.5 x 1.9
Satin-chrome scale and vernier backgrounds

15.5

3.7
Supplied in a suited case with inspection report

15.5
DIN 862

73.5
3.2

40
00514010

Order Measuring range Vernier reading Length of jaws Price list

number (mm) (mm) (mm) €
00514010 0 ÷ 150 0,02 40 28
00514011 0 ÷ 150 0,05 40 28
00514012 0 ÷ 200 0,02 50 49
00514013 0 ÷ 200 0,05 50 49
00514014 0 ÷ 300 0,02 60 96
00514015 0 ÷ 300 0,05 60 96

DEPTH FOOT FOR CALIPERS,

150MM c
b

00564001
a

Order C B C Price list

number (mm) (mm) (mm) €
00564001 76,2 30 16,2 17

6 www.standardgage.com
CALIPERS

VERNIER CALIPERS, METRIC/INCH

Finely graduated for precise measurement 227

Stainless steel

1.5 x 1.9
15.5
Satin-chrome scale and vernier backgrounds

3.7
Supplied in a suited case with inspection report

15.5
73.5
DIN 862 3.2

40
00534012

Order Measuring range Vernier reading Length of Price list

number lower scale (mm) upper scale (in) lower scale (mm) upper scale (in) jaws (mm) €
Metric/inch models mm in mm in mm
00534012 0 ÷ 150 0÷6 0,02 .001 40 29
00534013 0 ÷ 150 0÷6 0,05 1/128 40 29

VERNIER CALIPERS,
SELF-LOCKING
Self-locking
DIN 862

00514016

Order Measuring range Vernier reading Length of Price list

number lower scale (mm) upper scale (in) lower scale (mm) upper scale (in) jaws (mm) €
00514016 0 ÷ 150 0,02 40 30
00534016 0 ÷ 150 0÷6 0,05 1/128 40 30

www.standardgage.com 7
 MICROMETERS

ELECTRONIC MICROMETERS
IP54, EXTERNAL, METRIC

00134001
00134041

Electronic micrometers IP54, external, metric

Order Measuring Resolution Precision Settings Price list
Automatic shut-on/off number range (mm) (mm) (mm) tandards (mm) €
Metric/inch conversion Numerical Micrometer
Zero setting / Origin indication head
SR44 battery type 00134001 0 ÷ 25 0,001 0,01 0,004 79
Setting standard for 00134002 25 ÷ 50 0,001 0,01 0,004 25 95
sizes over 25 mm/1 in 00134003 50 ÷ 75 0,001 0,01 0,005 50 110
00134004 75 ÷ 100 0,001 0,01 0,005 75 120
Ratchet friction thimble
Electronic micrometer sets IP54, external, metric
and locking nut
Order Application range Single micrometers Setting standards Price list
Delivered in a suited number (mm) (mm) €
case with inspection 00134041 0 ÷ 100 4 25, 50, 75 383
report Full sets are supplied in a suited case with inspection report for each micrometer
Protection level to IP54
Absolute measurement Measuring range Dimensions
Carbide-tipped (mm) (mm)

measuring faces A B D L
0 ÷ 25 24 6 3,0 32
Resolution to 0,001
25 ÷ 50 32 8 3,0 57
mm / 0,00005 in
50 ÷ 75 45 8 3,0 82
Micrometer head 75 ÷ 100 57 10 3,0 107
resolution to 0,01 B L 41 64

mm/0,0001 in D 28,5

DIN 863-1
19,5
A

8 www.standardgage.com
MICROMETERS

EXTERNAL DIGITAL
MICROMETER IP54
Carbide-tipped measuring faces
Resolution .001 mm
Ratchet friction thimble and locking nut
Absolute measurement
Supplied in a suited case with inspection report
DIN 863-1

00134031
Order Measuring Accuracy Price list
number range (mm) (mm) €
00134031 0 ÷ 25 0,004 80

ADJUSTABLE
MICROMETER STANDS
40
25

117

00164009 00164010
68

40

120 Order Description Price list

number €
00164009 Micrometer stand 34
00164010 Micrometer stand – Heavy model 64

www.standardgage.com 9
 MICROMETERS

EXTERNAL MICROMETERS,
METRIC

00114010 00114041

Carbide-tipped measuring faces Order Measuring range Precision Setting standards Price list
number (mm) (mm) (mm) €
Scale division 0,01 mm /
00114010 0 ÷ 25 0,004 – 29
0,0001 in 00114011 25 ÷ 50 0,004 25 34
Setting standard for sizes over 00114012 50 ÷ 75 0,005 50 38
25 mm / 1 in 00114013 75 ÷ 100 0,005 75 41
Ratchet friction thimble and External micrometer sets, metric
locking nut
Delivered in a suited case with Order Application range Single Setting standards Price list
number (mm) micrometers (mm) €
inspection report
00114041 0 ÷ 100 4 25, 50, 75 134
DIN 863-1 Full sets are supplied in a suited case with inspection
B L 17 64
report to each micrometer
A 28,5
19,5

Measuring range Dimensions

6,5

(mm)
C

Metric (mm) A B C L
0 ÷ 25 3,0 6 24 32
25 ÷ 50 3,0 8 32 57
B L 17 64 50 ÷ 75 3,0 8 45 82
75 ÷ 100 3,0 8 57 107
6,5

A
19,5

100 ÷ 125 3,0 8 70 133

125 ÷ 150 3,0 8 82 158
C

150 ÷ 175 5,5 8 95 183

175 ÷ 200 5,5 8 107 209
200 ÷ 225 5,5 19,4 130 234
225 ÷ 250 5,5 19,4 142 260
250 ÷ 275 5,5 19,4 155 285
275 ÷ 300 5,5 19,4 168 310

10 www.standardgage.com
SETTING RINGS & SETTING STANDARDS

SETTING STANDARDS
For calibrating the zero position on external micrometers

D
With heat insulating handle
Supplied with inspection report
DIN 863-1

Ø8

Ø8
D
Flat measuring faces

Order Nominal Precision D Measuring Price list

number dimensions (mm) (mm) (mm) faces €
02164001 25 ± 0,0012 7 11
02164002 50 ± 0,0012 7 11
02164003 75 ± 0,0015 7 11
02164004 100 ± 0,0020 8 16

Order Nominal Precision D Measuring Price list

number dimensions (in) (in) (in) faces €
02164101 1 ± .00008 .276 11
02164102 2 ± .00008 .315 11
02164103 3 ± .00008 .276 11
02164104 4 ± .00012 .315 16

SETTING RINGS, METRIC

Used to set internal micrometers and

three-point micrometers to zero
Inspection report included
A Uncertainty of engraved diameter
B Cylindricity
DIN863-4

Order Diameter A B Price list

number (mm) (mm) (mm) €
00944004 6 ± 0,0015 0,0010 55
00944005 8 ± 0,0015 0,0010 55
00944006 10 ± 0,0015 0,0010 55
00944008 16 ± 0,0015 0,0010 55
00944010 25 ± 0,0015 0,0010 55
00944012 40 ± 0,0015 0,0010 85
00944014 62 ± 0,0015 0,0015 99
00944010 00944017 87 ± 0,0015 0,0015 166

www.standardgage.com 11
 MICROMETERS

THREE-POINT INTERNAL
MICROMETERS, METRIC
Application range 6 to 100 mm
Measure close to the bottom of blind bores
Allow access to deep holes using an extension delivered in standard
Carbide-tipped contact points for measuring application 12 ÷ 100 mm
Supplied in a suited case along with setting ring, extension rod, inspection report
DIN863-4

00914003
A
A

L1 L1

Order Measuring range Scale division Precision Setting rings L1 A Extension rods Price list
number (mm) (mm) (mm) (mm) (mm) (mm) (mm) €
00914001 6÷8 0,001 0,004 6 53,5 0,5 100 275
00914002 8 ÷ 10 0,001 0,004 8 53,5 0,5 100 275
00914003 10 ÷ 12 0,001 0,004 10 53,5 0,5 100 275
00914004 12 ÷ 16 0,005 0,004 16 80 0,5 150 260
00914005 16 ÷ 20 0,005 0,004 16 80 0,5 150 260
00914006 20 ÷ 25 0,005 0,004 25 90 0,5 150 280
00914007 25 ÷ 30 0,005 0,004 25 90 0,5 150 280
00914008 30 ÷ 40 0,005 0,004 40 97 0,5 150 300
00914009 40 ÷ 50 0,005 0,005 40 97 0,5 150 345
00914010 50 ÷ 63 0,005 0,005 62 114 0,5 150 370
00914011 62 ÷ 75 0,005 0,005 62 114 0,5 150 395
00914012 75 ÷ 88 0,005 0,005 87 114 0,5 150 420
00914013 87 ÷ 100 0,005 0,005 87 114 0,5 150 440

12 www.standardgage.com
MICROMETERS

SETS OF THREE-POINT INTERNAL

MICROMETERS, INTERNAL, METRIC

00914023
Order Measuring Single Setting Extension Price list
number range micrometers rings rods €
mm No mm No mm No mm
00914020 6 ÷ 12 00914001 6÷8 00944004 6 790
00914002 8 ÷ 10 00944005 8 00964001 100
00914003 10 ÷ 12 00944006 10
00914021 12 ÷ 20 00914004 12 ÷ 16 00944008 16 00964002 150 450
00914005 16 ÷ 20
00914022 20 ÷ 50 00914006 20 ÷ 25 00944010 25 00964003 150 1100
00914007 25 ÷ 30
00914008 30 ÷ 40 00944012 40 00964004 150
00914009 40 ÷ 50
00914023 50 ÷ 100 00914010 50 ÷ 63 00944014 62 1480
00914011 62 ÷ 75 00964005 150
00914012 75 ÷ 88 00944017 87
00914013 87 ÷ 100
Full sets are supplied in a suited case with inspection report for each internal
micrometer

EXTENSION RODS FOR

3 POINT MICROMETERS

00964001

Order Description Length Price list

number (mm/in) (mm/in) €
00964001 Extension rod for measuring range 6 ÷ 12 / .275 ÷ .500 100 / 4 41
00964002 Extension rod for measuring range 12 ÷ 20 / .500 ÷ .800 150 / 6 44
00964003 Extension rod for measuring range 20 ÷ 30 / .800 ÷ 1.2 150 / 6 44
00964004 Extension rod for measuring range 30 ÷ 50 / 1.2 ÷ 2 150 / 6 44
00964005 Extension rod for measuring range 50 ÷ 100 / 2 ÷ 4 150 / 6 44

www.standardgage.com 13
 DIAL GAUGES

ELECTRONIC COMPARATORS,
READING 0,01 MM / .0005 IN
8 mm diameter shank ø10

LC display, 10,5 mm digit height

01434002 PRESET function
Metric/inch conversion
ON/OFF function

ø56
ABS/DIFF modes

120
CR2032 battery type
Supplied in a case made of industrial ø8 h6

19
plastic with inspection report
DIN 878 ø4,5

Order Measuring Scale MPE Repeatability Price list

number range (mm/in) division (mm/in) (µm) (µm) €
01434001 12,5 .5 0,01 .0005 20 10 72
01434002 25 1 0,01 .0005 20 10 79

01434001

ELECTRONIC COMPARATORS,
READING 0,001 MM / 0,00005 IN
8 mm diameter shank
LC display, 10,5 mm digit height
PRESET function
Metric/inch conversion
ON/OFF function
ABS/DIFF/TOL/MAX modes
CR2032 battery type
Supplied in a case made of industrial plastic
with inspection report
DIN 878
Order Measuring range Scale division MPE Repeatability Price list 01434003
number (mm/in) (mm/in) (µm) (µm) €
01434003 12,5 .5 0,001 .00005 4 2 138
01434004 25 1 0,001 .00005 5 2 152

14 www.standardgage.com
DIAL GAUGES

Ø58MM DIAL GAUGES,

READING 0,01 MM
Full-metal bezel and case housing
Shank and plunger in hardened stainless steel
Steel ball tip with a 3,175 mm diameter
Adjustable tolerance pointers

ø58
Measuring insert with a M2,5 clamping thread

105
Shank with a 8h6 mm dia for metric dial gauges
Delivered in a suited case with inspection report

18
ø8 h6

With extra red tinted reverse numbering ø4

EN ISO463

6
01414015

01414010

Maximum permissible errors (MPE)

Scale division 0,01 mm Measuring span
10 mm 20 mm 30 mm
Deviation span of indication 15 µm 22 µm 28 µm
Total deviation span of indication 17 µm 25 µm 30 µm
Max hysteresis 3 µm 5 µm 5 µm
Deviation span of indication(local deviation span of 0,1 mm) 5 µm 10 µm 10 µm
Repeatability limit 3 µm 3 µm 3 µm

Order Measuring Scale Travel per Circular Movement Price list

number span division revolution scale €
01414010 10 mm 0,01 mm 1 mm 0 ÷ 50 ÷ 100 32
01414011 10 mm 0,01 mm 1 mm 0 ÷ 50 ÷ 100 Ruby 39
01414012 10 mm 0,01 mm 1 mm 0 ÷ 50 ÷ 100 Ruby – Shockproof 42
01414015 30 mm 0,01 mm 1 mm 0 ÷ 50 ÷ 100 55

Standard accessories

Order Description Price list

number €
01464002 Central lug back for indicators with a 58 mm dial diameter 68

www.standardgage.com 15
 LEVER INDICATORS

LEVER INDICATORS, METRIC

Small and large dial diameters
Resolution to 0,01 or 0,002 mm
Ruby or carbide contact point
Supplied in a case made of industrial plastic with
inspection report
DIN2270

17 7

55
20

ø2
01814010

Maximum permissible errors (MPE)

Scale division
0,01 mm 0,002 mm
Deviation span of indication 10 µm 3 µm
Total deviation span of indication 13 µm 4 µm
Hysteresis max 3 µm 2 µm
Deviation span of indication 5 µm 2 µm
(local measuring span 0,1 mm)
Repeatability limit 3 µm 15 µm

Order Measuring span Scale division Diameter Dial face Contact Price list
number €
Diameter Materials Length
01814010 0,8 mm 0,01 mm 32 mm white 2 mm Carbide 19 mm 64
01814011 0,8 mm 0,01 mm 38 mm white 2 mm Carbide 19 mm 64

16 www.standardgage.com
STANDS

MEASURING STANDS FOR DIAL

GAUGES AND COMPARATORS
Dovetail clamp, except for 01664001
8 mm diameter fixing bore
Adherence on a flat surface ≈450 N

01664001

01664002

Order Description Arm length Fixing bore Magnetic Weight Price list
number (mm) (mm) force (N) (kg) €
01664001 Magnetic stand 176 x 165 Ø 8 ÷ 9,6 450 1,5 39
01664002 Articulated arm 280 max Ø8 450 1,5 55

www.standardgage.com 17
 SCRIBING GAUGES

ELECTRONIC SCRIBING
GAUGES
Direct metric/inch conversion
Precision:
Model 300 mm/12 in: ±0,04 mm
Model 600 mm/24 in: ±0,05 mm
Resolution to 0,01 mm / 0,0005 in
Large high-contrast LC display
Hold function
ABS/INC measurement
RS232 data output
Floating zero
Locking screw, carbide scriber
Supplied in a resistant case with inspection report
JIS B 7517

12,7
15,7

75 9 057137

Order Measuring range Scriber Price list

number €
mm in
07734003 300 12 057137 250
07734004 600 24 057137 450

07734003

18 www.standardgage.com
SCRIBING GAUGES

SCRIBING GAUGES WITH

METRIC/INCH VERNIER READING
Unbeatable for accurate and reliable scribing
Stainless steel
Satin-chrome scale and vernier backgrounds
Supplied in a resistant case with inspection
report
JIS B 7517

10,5

8
40 50

41
057139
R6,5

8
100
13

12

057140
12

70

07734001

Order Measuring range Vernier reading Scriber Price list

number €
left scale right scale left scale right scale
07734001 0 ÷ 300 mm 0 ÷ 12 in 0,02 mm .001 in 057139 176
07734002 0 ÷ 500 mm 0 ÷ 20 in 0,02 mm .001 in 057140 260

www.standardgage.com 19
 ANGLE PROTRACTOR & LEVELS

UNIVERSAL BEVEL
PROTRACTOR WITH
VERNIER

Made from stainless steel

Laser stamped scales, satin-chrome backgrounds
Parallax-free readout
Magnifying glass for easy reading
Adjustable beam to any position within the entire
range

Order Measuring range Reading Blades Length Price list

number €
00634001 00634001 4 x 90° 5’ 300 mm / 12 in 150

ELECTRONIC LEVELS
WITH LASER
Embedded magnet on the measuring
surface
90° laser cross hair for levelling at-a-
distance
Reversible reading
for inverted use
Precision : ±0.2°
Repeatability : ±0.05°
Standard 9V battery
Order Measuring range Reading Dimensions Price list 05334001
number (L x W x H) €
05334001 4 x 90° 0.05° 9 x 1 x 2-1/4’’ 65

POCKET ELECTRONIC
INCLINOMETER
Aluminium base with built-in magnet
Display of angle in degrees and in %
Hold function
Precision : ±02°
2 x CR2032 battery

Order Measuring range Reading Length Price list 05334010

number €
05334010 4 x 90° 0.1° 100 mm 35

20 www.standardgage.com
SQUARES

KNIFE EDGE SQUARE 90°

DIN 875
Grades "00" and "0"
Stainless steel squares
90° degrees squares with knife edge
Supplied in a suited case with inspection report

Order Dimensions Grade Price list

number €
08114001 50 x 40 00 23
08114002 75 x 50 00 27
08114003 100 x 70 00 31
08114004 150 x 100 00 47
08114005 200 x 130 00 59

08114003

FLAT EDGE SQUARE 90°

WITH WIDE BASE, GRADE 0
Grade "0" or "1"
Stainless steel squares
90° degrees squares with knife edge
Supplied in a suited case with inspection report
DIN 875

Order Dimensions Grade Price list

number €
08114031 75 x 50 0 28
08114032 100 x 70 0 32
08114033 150 x 100 0 40
08114034 200 x 130 0 58
08114032 08114035 300 x 200 0 110

www.standardgage.com 21
 GAUGE BLOCKS SETS

SETS OF STEEL GAUGE

BLOCKS, METRIC
M103, M88, M47, M32 gauge block sets
Accuracy grades 1 and 2
Complying with ISO 3650
Provided in a wooden case with inspection report

06511102

06511103

Order Description Grades Price list

number €
06511102 M88 block set 1 507
06511103 M47 block set 1 360
06511104 M32 block set 1 277
06511202 M88 block set 2 395
06511104 06511203 M47 block set 2 286
06511204 M32 block set 2 218

22 www.standardgage.com
GAUGES BLOCKS SETS

Set compositions
103-piece set
Dimensions (mm) Steps (mm) Pieces
1,005 - 1
1,01 ÷ 1,49 0,01 49
0,5 ÷ 24,5 0,5 49
25 ÷ 100 25 4

88-piece set
Dimensions (mm) Steps (mm) Pieces
1,0005 - 1

te
1,001 ÷ 1,009 0,001 9

V
1,01 ÷ 1,49 0,01 49

te
0,5 ÷ 9,5 0,5 19

47-piece set
ln
Dimensions (mm) Steps (mm) Pieces
1,005 - 1
1,01 ÷ 1,09 0,01 9
1,1 ÷ 1,9 0,5 9
1÷ 25 1 25
50 ÷ 100 25 3 Nominal length In;
variation v, limit deviations te at any
point against the nominal length
32-piece set
Dimensions (mm) Steps (mm) Pieces
1,005 - 1
1,01 ÷ 1,09 0,01 9
1,1 ÷ 1,9 0,1 9
1÷9 1 9
10, 20, 30, 50 - 4

Grade 1 Grade 2
Nominal length Limit deviation at any point Tolerance for the variation in Limit deviation at any point Tolerance for the variation in
against the nominal length length against the nominal length length

ln ± te tv ± te tv
mm µm µm µm µm
0,5 ≥ ln ≤ 10 0,2 0,16 0,45 0,3
10 < ln ≤ 25 0,3 0,16 0,6 0,3
25 < ln ≤ 50 0,4 0,18 0,8 0,3
50 < ln ≤ 75 0,5 0,18 1 0,35
75 < ln ≤ 100 0,6 0,2 1,2 0,35

www.standardgage.com 23
All modification rights reserved 10012631704