Peristaltic pumps

Series ASH
Design ID

Applications Shaft seal ring(s) separate the pump area and bearing from
In wastewater and clarification plants; the chemical and each other and keep these areas sealed.
petrochemical industry; pulp, paper, and textile industry; soap ! European patent No. 0 569 875 and US patent 5,350,384
and grease industry; construction; ceramics and montan
industry; paints; meat and fish processing industry; tanneries, " European patent No. 0 577 946 and US patent 5,375,984

cosmetics, etc.
Technical specifications
Suitable for pumping and metering low-viscosity and high-
Please refer to the diagram on page 2 or the separate individual
viscosity liquids, neutral or aggressive liquids, undiluted or
diagrams for pump capacities, permissible speed ranges, and
abrasive liquids, liquids containing gases, liquids prone to
required drives.
foaming, also liquids with fibrous or solid particles.
3
Output Q m /h to 60
Functionality
l/min 1000
Dry self-priming displacement pump without gaskets or valves. o
Temperature of pumped t C to 80
Pumping elements are the pump hose and rotor with sliders. liquid
As the rotor turns, two sliders (aligned at 180-degree from each Differential pressure )p bar to 15
other) alternately compress the pump hose and move the Maximum pump pressure pd bar to 16
pumped liquid incrementally from the suction to the pressure
Achievable underpressure ps !bar to 0.95
side.
Viscosity η mPa$s ! to 100000
The thick-wall, fabric-reinforced pump hose subsequently opens
automatically, creating an underpressure situation that effects Permissible solids content Vol % to 20
continuous suction. The specified performance data are intended to provide only an overview of the
product and its performance! The data are influenced by the parameters: speed,
The pumped liquid passes through the pump hose without operational mode, the elastomer used, type and temperature of the pumped liquid,
contacting mechanical components. The smooth flow results in a and the pump size.
gentle pumping action without turbulence and emulsification.
Refer to the respective proposal and order confirmation for exact operational limits.
The direction of rotation can be reversed, thereby reversing the
pumping direction. Maximum permissible grain sizes and fiber lengths
Size 15 25 32 40
Structural design
Glands and packing rings elastically clamp the hose (placed Max. grain size mm 5 8 11 13
between the pump housing and the rotor) onto the pump Max. fiber length mm 150 200 250 330
connectors in the pump housing.
The bearings of the asymmetrical rotor are arranged inside the
compact pump housing. Size 50 65 80 100

The pump housing is sealed by means of a ventilated cover that Max. grain size mm 17 22 27 33
is equipped with grease and coolant level indicators. Max. fiber length mm 430 550 680 820
The short and elastic clamping of the pump hose ! and the The pump speed must be reduced as the proportion of solids and the viscosity of the
asymmetrically-shaped rotor with the corresponding pump liquid increase.
housing shape " extend the life of the pump hose, reduce the ! Without using a supplemental vacuum up to 0.65 bar / up to 40,000 mPa$s
pump’s working temperature, and reduce the quantity of grease,
coolant, and pumped liquid that will mix in the pump housing if Materials
the pump hose breaks.
Description Material type
The drive torque is transferred from the one-piece rotor through Pump housing ASH 15 … 80: EN-GJL-250
its shaft to the sliders, which are adjustable by means of adjuster
ASH 100: EN-GJS-400-15
panels.
Pump cover ASH 15: acrylic glass
Grease and coolant in the pump housing lubricate and cool the ASH 25 … 100: QSt 52-3
pump hose, the rotor, and the sliders.
Pump connector see page 3 “Type key”
Rotor EN-GJS-600-3
Slider aluminum alloy, optional EN-GJS-400-15
Pump hose see page 3 “Type key”

1
Series ASH
Design ID
Drive unit Setting up the pump
See page 10 for the drive options. ASH peristaltic pumps are set up horizontally.
Drives from any manufacturer can be used. Refer to the The pump and the drive are bound together by means of an
manufacture’s documentation for technical specifications and elastic coupling; they are mounted on a shared base plate. See
dimensions. pages 8 and 9 for configuration, dimensions, and weight of pump
units without a drive.
Dimensions and weights for pump units with drives are available
upon request.

Diagram
Used for rough selection of the pump size and rotational speed in dependence of the desired flow rate. Refer to the individual diagram
fields for the exact design data.

Intermittent operation

Continous operation
Output Q [m3/h]

Speed [min–1 ]

2 VM 766 GB/09.04 – Ident No. 796 438

Series ASH
Design ID
Type key

Material type
Geometric type
Type

① ② ③④ ⑤ ⑥ ⑦⑧ ⑨ ⑩ ⑪ ⑫
ASH 100 GN ID / 1 D 1 H NBR 4 …

Product
Size
Displacement
Lubricant/coolant
Design type
Pump cover type
Pump connection-piece type
Connection piece position
Hose type
Hose material
Pump connection-piece material
Material variations

Explanations for the type key

Position in Designation Type
type key
① Product ASH = ALLWEILER – peristaltic pump
② Size Possible sizes: 15, 25, 32, 40, 50, 65, 80, 100
The numbers represent the inner diameter of the pump hose in mm.
③ Displacement G = Slider
④ Lubricant/coolant N = Glycerin
X = Special variations
⑤ Design type ID = Industrial design type with internal bearings
⑥ Pump cover type 1 = Pressureless, ventilated/vacuum resistant
X = Special type of pump lid
⑦ Pump D = Raised edge with DIN2642-PN10 lapped flange, connection dimensions according to
connection-piece DIN2501-PN16
type C = Flange with sealing strip shape according to C DIN2633-PN16
A = Raised edge with lapped flange, connection dimensions according to ANSI B16.5 class 150
K = Smooth shoulder (plastic) with lapped flange (steel) according to DIN8063-4-PN10,
Connection dimensions according to DIN2501-PN16
L = Smooth shoulder (plastic) with lapped flange (plastic) according to DIN8063-4-PN10,
Connection dimensions according to ANSI B16.5 class150
R = Pipe outer threads according to DIN 2999
T = Nozzle
X = Special pump connection-piece type
⑧ Connection 1 = Top
piece position 2 = Left
as viewed from the drive
3 = Bottom
4 = Right
⑨ Hose type H = High-pressure hose with two doubled fabric inserts
M = Medium-pressure hose with one doubled fabric insert
X = Special variations
⑩ Hose material NR = Isoprene rubber (natural rubber)
NBR = Acrylonitrile-butadiene rubber
CSM = Chlorosulfonated polyethylene
EPDM = Ethylene propylene diene terpolymer
X = Hose material in special version
⑪ Pump 3 = Polyethylene
connection-piece 4 = 1.4571
material
X = Pump connection-piece material in special version
⑫ Material X = Special variations
variations

VM 766 GB/06.05 – Ident No. 796 438 3

Series ASH
Design ID
Sectional drawing and parts index ASH 15 GN-ID

Part No. Denomination

101 Circlip
102 Groove ball bearing
103 Spacer sleeve
104 Circlip
105 Cylindrical roller bearing
106 Shaft seal ring
107 Bearing grease
108 Shim ring
109 Circlip
110 Thrower
111 Key
201 Stuffing box bottom ring
202 Packing ring
203 Gland
204 Spring ring
205 Hexagon screw
301 Rotor
303 Spring ring
304 Hexagon screw
401 Pump hose
402 Slider
403 Lubricant/coolant
501 Pump housing
502 O-ring
503 Pump cover
508 Pump connection piece
601 Type plate
602 Half-round head grooved pin
603 Information plate "Start-up"
604 Information plate "Suction"
605 Information plate "Pressure“
606 Washer
607 Hexagon screw
611 Ventilation cover
621 Information plate "Min. fill height”

4 VM 766 GB/09.04 – Ident No. 796 438

Series ASH
Design ID
Sectional drawing and parts index ASH 25 ... 100 GN-ID

Part No. Denomination

401 Pump hose
402 Slider
403 Lubricant/coolant
501 Pump housing
502 O-ring
503 Pump cover
504 Screw plug
505 Joint tape
506 Ascending pipe
507 Sealing bush
508 Pump connection piece
601 Type plate
602 Half-round head grooved pin
603 Information plate “Start-up"
604 Information plate "Suction"
605 Information plate "Pressure“
606 Washer
607 Hexagon screw
607 Stud bolt
607 Hexagon nut
Part No. Denomination Part No. Denomination
607 Sealing material
101 Circlip 111 Key
608 Ring nut
102 Groove ball bearing 201 Stuffing box bottom ring
609 Spring ring
103 Spacer sleeve 202 Packing ring
610 Hexagon screw
104 Circlip 203 Gland
611 Ventilation cover
105 Cylindrical roller bearing 204 Spring ring
612 Pipe nipple
106 Shaft seal ring 205 Hexagon screw
613 Joint tape
107 Bearing grease 301 Rotor
614 T-piece
108 Shim ring 302 Plate
615 Pipe double nipple
109 Circlip 303 Spring ring
616 Screw plug
110 Thrower 304 Hexagon screw
621 Information plate "Min. fill height“

VM 766 GB/09.04 – Ident No. 796 438 5

Series ASH
Design ID
Pump dimensions, connector locations, weights for pump connector versions D, A, K, L

ASH 15 GN-ID

ASH 25 ... 100 GN-ID

Type a c d e f g h i k l m n o p q 5) s t u v w R 3) M 1)
ASH 15 GN-ID 195 12 24 110 - 290 55 35 167 35 20 - 78.5 - 400 M8 27 8 160 74 - 13
ASH 25 GN-ID 264 15 32 188 218 370 125 49 214 55 30 17 108 164 530 11 35 10 308 49 Rp ½ 37
ASH 32 GN-ID 330 20 38 234 264 460 155 50 230.5 60 32 17 116 202 650 14 41 10 343 60 Rp ½ 65
ASH 40 GN-ID 430 20 48 305 345 575 190 69 265.3 75 32 17 142.8 273 810 14 51.5 14 394 80 Rp ½ 104
ASH 50 GN-ID 554 24 60 392 430 720 250 89 323 90 38 20 176 355 1030 18 64 18 507 88 Rp 1 179
ASH 65 GN-ID 746 30 75 532 580 940 325 117 381.8 110 38 20 220.8 490 1360 18 79.5 20 605 120 Rp 1 359
ASH 80 GN-ID 876 40 90 610 688 1100 385 142 446 130 44 24 267.5 554 1670 22 100 25 672 141 Rp 1 535
ASH100 GN-ID 1042 45 110 730 817 1300 460 139 508 140 57 30 291 674 1930 26 116 28 787 168 Rp 1 835

Pump connection-piece types

4) 4)
Type D = DIN 2642-PN10 A = ANSI B16.5 class 150 lapped K = DIN 8063-4-PN10 L = DIN 8063-4-PN10
Connector dimensions according to Connector dimensions according to Connector dimensions according to
DIN 2501-PN16 DIN 2501-PN16 ANSI B16.5 class 150
z2 z2 z2 z2
DN b D L K r DN b D L K r DN b D L K r DN b D L K r
) ) ) )

ASH 15 GN-ID 15 195 95 14 65 15 4 ½” 195 88,9 15,7 60,5 13,7 4 15 195 95 13,5 65 18 4 1½” 195 95 15,7 60,5 17 4
ASH 25 GN-ID 25 250 115 14 85 20 4 1” 250 108 15,7 79,2 17,2 4 25 243 115 14 85 23,5 4 1” 243 115 15,7 79,2 21 4
ASH 32 GN-ID 32 296 140 18 100 20,5 4 1¼” 296 117,3 15,7 88,9 18,7 4 32 291 140 18 100 25 4 1¼” 291 140 15,7 88,9 23 4
ASH 40 GN-ID 40 340 150 18 110 21,5 4 1½” 340 127 15,7 98,6 20,5 4 40 335 150 18 110 26,5 4 1½” 335 150 15,7 98,6 24 4
ASH 50 GN-ID 50 415 165 18 125 24 4 2” 415 152,4 19,1 120,7 22,1 4 50 410 165 18 125 29,5 4 2” 410 165 19,1 120,7 27 4
ASH 65 GN-ID 65 508 185 18 145 26,5 4 2½” 508 177,8 19,1 139,7 25,4 4 65 503 185 18 145 32,5 4 2½” 503 185 19,1 139,7 30 4
ASH 80 GN-ID 80 615 200 18 160 27 8 3” 615 190,5 19,1 152,4 27,4 4 80 605 200 18 160 34,5 8 3” 605 200 19,1 152,4 33 4
ASH100 GN-ID 100 720 220 18 180 28,5 8 4” 720 228,6 19,1 190,5 27,4 8 100 705 220 18 180 36,5 8 4” 705 229 19,1 190,5 36 8

1) Maximum mass: kg 2) z = quantity 3) DIN 2999 4) Smooth shoulder (plastic) 5) Space for assembly ! ... % Connector position
Dimensions in mm, standard widths of the ANSI flanges (DN) in inches, subject to change
6 VM 766 GB/09.04 – Ident No. 796 438
Series ASH
Design ID
Pump dimensions, connector positions, weights for pump connector types C, R, T

ASH 15 GN-ID
Pump connection-piece type R

ASH 25 ... 100 GN-ID

Pump connection-piece type C

Pump connection-piece types

Type C = DIN 2633-PN 16 R = DIN 2999 T = Nozzle
DN b D L K r z 2) b D 3) r b D 4) r Pump connection- Pump connection-
ASH 15 GN-ID - - - - - - - 221 R½ 13.2 181 15 31 piece type R piece type T
ASH 25 GN-ID 25 250 115 14 85 16 4 275 R1 16.8 240 25 50
ASH 32 GN-ID 32 296 140 18 100 16 4 331 R1¼ 19.1 293 32 62
ASH 40 GN-ID 40 340 150 18 110 16 4 373 R1½ 19.1 343 38 70
ASH 50 GN-ID 50 415 165 18 125 18 4 447 R2 23.4 420 50 75
ASH 65 GN-ID 65 508 185 18 145 18 4 545 R2½ 26.7 - - -
ASH 80 GN-ID 80 615 200 18 160 20 8 630 R3 29.8 - - -
ASH100 GN-ID 100 720 220 18 180 20 8 - - - - - -

Type a c d e f g h i k l m n o p q 5) s t u v w R 3) M 1)
ASH 15 GN-ID 195 12 24 110 - 290 55 35 167 35 20 - 78.5 - 400 M8 27 8 160 74 - 13
ASH 25 GN-ID 264 15 32 188 218 370 125 49 214 55 30 17 108 164 530 11 35 10 308 49 Rp ½ 37
ASH 32 GN-ID 330 20 38 234 264 460 155 50 230.5 60 32 17 116 202 650 14 41 10 343 60 Rp ½ 65
ASH 40 GN-ID 430 20 48 305 345 575 190 69 265.3 75 32 17 142.8 273 810 14 51.5 14 394 80 Rp ½ 104
ASH 50 GN-ID 554 24 60 392 430 720 250 89 323 90 38 20 176 355 1030 18 64 18 507 88 Rp 1 179
ASH 65 GN-ID 746 30 75 532 580 940 325 117 381.8 110 38 20 220.8 490 1360 18 79.5 20 605 120 Rp 1 359
ASH 80 GN-ID 876 40 90 610 688 1100 385 142 446 130 44 24 267.5 554 1670 22 100 25 672 141 Rp 1 535
ASH100 GN-ID 1042 45 110 730 817 1300 460 139 508 140 57 30 291 674 1930 26 116 28 787 168 Rp 1 835

1) Maximum mass 2) z = quantity 3) DIN 2999 4) Hose inner diameter 5) Space for assembly ! ... % Connector position
Dimensions in mm, subject to change

VM 766 GB/09.04 – Ident No. 796 438 7

Series ASH
Design ID

Dimensions and weights for pump units without drive for ASH 15 GN-ID

See page 9 for table of dimensions.

8 VM 766 GB/09.04 – Ident No. 796 438

Series ASH
Design ID
Dimensions and weights for pump units without drive for ASH 25 ... 100 GN-ID

Type a c1 d e1 f1 g h h1 k l m1 m2 m3 n1 n2 o o1 p1 q 4) s1 t u v R 3) M 1)
ASH 15 GN-ID 195 3 24 180 205 290 102 48 167 35 230 180 - 30 20 78.5 33.5 185 400 9 27 8 160 - 16
ASH 25 GN-ID 264 5 32 290 315 370 125 95 214 55 355 295 50 30 30 108 42 289 530 11 35 10 308 Rp ½ 45
ASH 32 GN-ID 330 6 38 370 400 460 155 110 230.5 60 400 340 60 30 30 116 49 333 650 14 41 10 343 Rp ½ 78
ASH 40 GN-ID 430 8 48 445 475 575 190 135 265.3 75 480 420 80 30 30 142.8 56.8 394 810 14 51.5 14 394 Rp ½ 129
ASH 50 GN-ID 554 8 60 580 630 720 250 150 323 90 560 480 80 40 40 176 67 451 1030 18 64 18 507 Rp 1 217
ASH 65 GN-ID 746 10 75 750 800 940 325 190 381.8 110 720 640 100 40 40 220.8 83.8 583 1360 18 79.5 20 605 Rp 1 434
ASH 80 GN-ID 876 10 90 890 950 1100 385 210 446 130 860 780 100 40 40 267.5 101.5 694 1670 18 100 25 672 Rp 1 640
ASH100 GN-ID 1042 12 110 1040 1100 1300 460 230 508 140 980 880 120 50 50 291 122 811 1930 18 116 28 787 Rp 1 1015

1) Maximum mass: kg 2) See dimension sheets on pages 6 and 7 3) DIN 2999 4) Space for assembly ! " % Connector position
Dimensions in mm, subject to change

VM 766 GB/09.04 – Ident No. 796 438 9

Series ASH
Design ID
Drive options

Peristaltic pump ASH ... -ID with elastic coupling Peristaltic pump ASH ... -ID with elastic coupling and back-
and back-geared motor geared motor with integrated frequency converter

Peristaltic pump ASH ... -ID with elastic coupling Peristaltic pump ASH ... -ID with elastic coupling, transmission,
and infinitely adjustable back-geared motor elastic coupling, and motor

Peristaltic pump ASH ... -ID with elastic coupling, transmission,

elastic coupling, and internal combustion engine

Other drive possibilities exist.

10 VM 766 GB/09.04 – Ident No. 796 438

Series ASH
Design ID

Standard eccentric Series Number of stages Max. flow rate Max. pump Max. viscosity
screw pumps at )p = 0 bar pressure
m³/h l/min bar mPa$s
AE1L-ID 1 186 3100 4 200,000
AE.E-ID 1.2 450 7500 10 300,000
AE.N-ID 1.2 290 4850 16 270,000
AE.H-ID 2.4 174 2900 24 270,000
AEB1L-IE 1 186 3100 4 200,000
AEB.E-IE 1.2 174 2900 6 300,000
AEB.N-IE 1.2 111 1850 12 270,000
AEB4H-IB 4 12 200 24 270,000
AED.E-ID 1 720 12000 8 250,000
AED.N-ID 2 450 7500 16 225,000
AEDB.E-IE 1 258 4300 6 250,000
AEDB.N-IE 2 174 2900 12 225,000
AE.N…-RG 1.2.4 30 500 20 1,000,000
TECFLOW 1 186 3100 4 200,000
SEZP 1.2 21 350 10 1,000,000
SNZP 1.2 45 750 12 1,000,000
SNZBP 1.2 45 750 12 1,000,000
SSP 1.2 48 800 12 150,000
SSBP 1.2 48 800 12 150,000
SETP ! 1.2 140 2350 10 300,000
SETBP 1.2 40 670 10 150,000
SEFBP 1 40 670 6 150,000
SMP 1 40 670 6 150,000
SMP2 1 5.5 92 6 11,500
AFP 1 2.8 47 6 50,000
ANP 2 2.5 42 12 20,000
ANBP 2 2.5 42 12 20,000
ASP 2 2.5 42 12 20,000
ASBP 2 2.5 42 12 20,000
ADP 3 0.6 10 12 20,000
ADBP 3 0.6 10 12 20,000
ACNP 1.2 29 480 12 150,000
ACNBP 1.2 29 480 12 150,000
! Special higher-pressure version available

Standard peristaltic Series Max. flow rate Max. pump pressure Max. viscosity
pumps
m³/h l/min bar mPa$s
ASL 2.4 40 4 40,000
ASH 60 1000 15 100,000

Standard macerators Series Max. flow volume Intrinsic pump head

m³/h m
AM...S-1 80 at 3% TS 3
ABM...S-1 80 at 3% TS 3
AM…I-1 160 at 3% TS -
ABM…I-1 80 at 3% TS -

Accessories Pump accessories: Supplemental vacuum for peristaltic pump AVH

(see technical specifications and operating instructions VM 810.0009), also with vacuum pump.
Pulsed damper with and without compressed air fitting.
Drives: Back-geared motors, adjustable gear, reduction gear, internal combustion engines, hydraulic drives.
Power-transmitting parts: Couplings, other intermediate gear.
Base plates: Standard and special versions available, mobility equipment.
Safety devices: Hose-break detector ASM
(see technical specifications and operating instructions VM 810.0007).
System accessories: Electric, hydraulic, or pneumatic control devices; collector systems, metering
equipment, fittings, flanges, hoses

VM 766 GB/09.04 – Ident No. 796 438 11

Series ASH
Design ID

Technical alterations reserved.

ALLWEILER AG
Business Unit Eccentric Screw Pumps
Postfach 200123 $ 46223 Bottrop
Kirchhellener Ring 77-79 $ 46244 Bottrop
Germany
Tel. +49 (0)2045 966-60
Fax. + 49 (0)2045 966-679
E-Mail: [email protected]
Internet: http://www.allweiler.com
VM 766 GB/06.05 – Ident No. 796 438