Scribd
Upload
221 views2 pages

Estrias para Eixos DIN 5463 - Inativa PDF

This document provides specifications for metric parallel spline shaft connections according to DIN 5463. It lists nominal dimensions for various spline profiles including number of keys, internal diameters, outside diameters, key widths and other tolerances. Notes provide additional details on centering options during production and state that tolerances should be specified for internal diameter, outside diameter and key width.

Uploaded by

Cledson Saviski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
221 views2 pages

Estrias para Eixos DIN 5463 - Inativa PDF

This document provides specifications for metric parallel spline shaft connections according to DIN 5463. It lists nominal dimensions for various spline profiles including number of keys, internal diameters, outside diameters, key widths and other tolerances. Notes provide additional details on centering options during production and state that tolerances should be specified for internal diameter, outside diameter and key width.

Uploaded by

Cledson Saviski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

90 Bissel Street

Joliet, IL 60432

phone 800.876.7216

fax 815.723.9207

METRIC PARALLEL SPLINE SHAFT CONNECTIONS - DIN 5463 (in mm)

The flank of each key must be parallel to the inside diameter d' Details left unspecified are to be designed as appropriate
as far as to the point of intersection.

Dimensions of a spline bore profile A having the nominal Designation of a spline shaft profile B having the nominal
dimensions 8 x 32 x 36:Spline bore profile A 8 x 32 x 38 DIN 5462 dimensions 8 x 46 x 54:Spline shaft profile B 8 x 46 x 54 DIN 5463

1) Internal centering is not possible for all profiles when producing spline shaft profiles by the hobbing process.
2) These values have been calculated on the basis that the spline shaft profiles are produced by the hobbing process
3) Tolerances for inside diameter d1, outside diameter d2, and key width b should be stated
4) The old symbol should no longer be used for new construction and remains in force only for the transition period.

[email protected] ● Monday-Friday 7a-4.30p ● Saturday 7a-12p


90 Bissel Street

Joliet, IL 60432

phone 800.876.7216

fax 815.723.9207

METRIC PARALLEL SPLINE SHAFT CONNECTIONS - DIN 5463 (in mm)

Nominal dimensions

New Old
symbol symbol
Number inside No. of
Centering d1 d2 b D3 e2 f g K r
of keys diam. Keys
inside Outside
diameter diam.
outside width of
diam. key
6 x 11 x 14 11 x 14 x 4 interior 11 14 3 9.9 1.55 0.3 0.3 0.2
13 x 16 x
6 x 13 x 16 centering 13 16 4 12 1.5 0.32 0.3 0.3 0.2
3.5
6 x 16 x 20 16 x 20 x 4 16 20 4 14.5 2.1 0.16 0.3 0.3 0.2

6 x 16 x 22 18 x 22 x 5 18 22 5 16.7 1.95 0.45 0.3 0.3 0.2


6
6 x 21 x25 21 x 25 x 5 21 25 5 19.5 1.98 1.95 0.3 0.3 0.2

6 x 23 x 28 23 x 28 x 6 23 28 6 21.3 2.3 1.34 0.3 0.3 0.2

6 x 26 x 32 26 x 32 x 6 26 32 6 23.4 2.94 1.65 0.4 0.4 0.3

6 x 28 x 34 28 x 34 x 7 28 34 7 25.9 2.94 1.7 0.4 0.4 0.3

8 x 32 x 36 32 x 38 x 6 interior 32 38 6 29.4 3.3 0.15 0.4 0.4 0.3

8 x 36 x 40 36 x 42 x 7 or flank 35 42 7 33.9 3.01 1.02 0.4 0.4 0.3

8 x 42 x 46 42 x 48 x 8 centering 42 48 8 39.5 2.91 2.57 0.4 0.4 0.3

8 x 46 x 50 46 x 54 x 9 8 46 54 9 42.7 4.1 0.86 0.5 0.5 0.5

8 x 52 x 58 52 x 60 x 10 52 60 10 48.7 4.74 2.44 0.5 0.5 0.5

8 x 56 x 62 56 x 65 x 10 56 65 10 52.2 5 2.5 0.5 0.5 0.5

8 x 62 x 68 62 x 72 x 10 62 72 12 57.8 5.43 2.4 0.5 0.5 0.5

10 x 72 x 72 72 x 82 x 12 72 78 12 67.4 5.43 0.5 0.5 0.5

10 x 82 x 92 82 x 92 x 12 82 88 12 77.1 5.4 3 0.5 0.5 0.5


10 x 92 x 92 x 102 x
92 98 14 87.3 5.2 4.5 0.5 0.5 0.5
102 14 10
10 x 102 x 102 x 112 x
102 108 16 97.7 4.9 6.3 0.5 0.5 0.5
112 16
10 x 112 x 112 x 125 x
112 120 18 106 3.4 4.4 0.5 0.5 0.5
125 18

[email protected] ● Monday-Friday 7a-4.30p ● Saturday 7a-12p

You might also like