Scribd
Upload
296 views

Specification Sheet

The document provides specifications for concrete kerbs, including: 1) Concrete kerbs are precast concrete units intended to separate surfaces and provide physical or visual separation between traffic areas. 2) Technical specifications include tolerances on work sizes and weights for different kerb lengths. Kerbs are made of grade 30 MPa concrete with no reinforcement and cured for 7 days. 3) Materials used are ordinary Portland cement, natural rocksand and coarse aggregates that meet BS standards, and borehole water tested monthly by external laboratories.

Uploaded by

edohartanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
296 views

Specification Sheet

The document provides specifications for concrete kerbs, including: 1) Concrete kerbs are precast concrete units intended to separate surfaces and provide physical or visual separation between traffic areas. 2) Technical specifications include tolerances on work sizes and weights for different kerb lengths. Kerbs are made of grade 30 MPa concrete with no reinforcement and cured for 7 days. 3) Materials used are ordinary Portland cement, natural rocksand and coarse aggregates that meet BS standards, and borehole water tested monthly by external laboratories.

Uploaded by

edohartanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Specification Sheet

Concrete Kerbs
Description
The Concrete Kerb is a precast concrete unit intended to separate surfaces of the same
or of different levels to provide physical or visual separation between areas submitted to
different kinds of traffic. Its use can be domestic as well as industrial.

Normative Reference
BS EN 1340:2003 - Concrete Kerbs Units Blocks - Requirements and test methods

Technical Specifications
• Tolerances on work sizes
200
Dimension Maximum Dimensional Deviation
Length +3mm – 5mm
125
Height +3mm – 5mm
Length 450
Thickness (Width) +2mm – 2mm
• Weight of UBP Concrete Kerbs
Type of Kerb Weight
450mm long ±30kg
1000mm long ±90kg
• Concrete grade 30 MPa
• Reinforcement: None
• Curing period: 7 days of curing in yard prior to delivery

Materials Specifications 120

• Cement
ORDINARY PORTLAND CEMENT (CEM I – 42.5N)
Compliance with BS EN 197-1:2000 – Cement. Composition, specifications and
250
conformity criteria for low heat common cements.
• Aggregates 100
UBP AGGREGATES (Rocksand 0-4mm & Coarse Aggregate 4-6mm)
Compliance with BS 882: 1992 – Specification for aggregates from natural sources 150
for concrete.
Length 1000
• Water
BOREHOLE – Clean and free from any harmful amounts of deleterious matter, either
in suspension or in solution controlled each month by external laboratories.

Tested by UBP – LABORATORY DEPARTMENT


Issue Date: 04/11/16

You might also like