Scribd
Upload
54 views2 pages

s4shr-Lp Spec Sheet

The S4SHR-LP is a narrow 4" hydraulic submersible shredder pump that can fit through most manholes. It is designed to continuously rip and shear solids with a 360 degree shredding action, making it suitable for municipal, industrial, agricultural, and institutional waste applications. Key features include an open-vane shredder impeller with tungsten carbide cutting tip, hardened macerator suction plate, oil-lubricated seals, and variable speed hydraulic drive up to 2000 rpm.

Uploaded by

edfabaro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views2 pages

s4shr-Lp Spec Sheet

The S4SHR-LP is a narrow 4" hydraulic submersible shredder pump that can fit through most manholes. It is designed to continuously rip and shear solids with a 360 degree shredding action, making it suitable for municipal, industrial, agricultural, and institutional waste applications. Key features include an open-vane shredder impeller with tungsten carbide cutting tip, hardened macerator suction plate, oil-lubricated seals, and variable speed hydraulic drive up to 2000 rpm.

Uploaded by

edfabaro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

4” HYDRAULIC SUBMERSIBLE

SHREDDER PUMP
MODELS
S4SHR-LP
4” (10 cm) Discharge

The S4SHR-LP is a narrow version of


the S4SHR. At only 21.5 inches wide it
will fit through most manholes. This
pump is designed to continuously rip
and shear solids with a 360° shredding
action. Great for municipal , industrial,
agricultural and institutional waste
applications.

FEATURES

• Open-Vane Shredder Impeller with


Tungsten Carbide Cutting Tip
SPECIFICATIONS
WEIGHT:..................................................... 225 lbs. (102 kg)

•
HEIGHT:.............................................................. 28" (71 cm)
Hardened Macerator Suction Plate WIDTH (w/Discharge elbow):........................ 21 1/2" (55 cm)

•
(Across Volute).................................16 3/4" (43 cm)
Oil Lubricated Seals (can run dry) DISCHARGE:........................................................ 4" NPT(F)

•
SOLIDS HANDLING:........................................ 3 1/2" (9 cm)
Variable Speed hydraulic drive to 2000 rpm HOSE PORTS:.......................................... 3/4" (-12) SAE(F)

•
PUMP BODY:...................................................... Ductile Iron
Will Fit Into 22” Manholes IMPELLER:.......................................................... Ductile Iron

•
SHREDDER BLADE:................................ Tungsten Carbide
Safe Hydraulic Drive can be used where SHAFT:.......................................................... Stainless Steel
electric power is hazardous or impractical
SHAFT SEAL:................................ (Upper) Carbon/Ceramic

• Dependable gear type hydraulic motor


(Lower) Silicon Carbide
ELASTOMERS:......................................................... Buna N

• Operates with our HT16 to HT35 power


units or other hydraulic power sources
HYDRAULIC OIL:................. 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................. Max. 15 GPM (57 LPM)
OPERATING PRESSURE:............ Max. 3000 PSI (204 Bar)
capable of flows of 10 - 15 GPM
POWER SOURCE:....... Any Open Center Hydraulic System

D0516 Specifications are subject to change without notice

167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061


Website: www.hydra-tech.com E-Mail: [email protected]
Model S4SHR-LP Overall Dimensions

S4SHR-LP Typical Performance

167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061


Website: www.hydra-tech.com E-Mail: [email protected]

You might also like