Project Title*

Authors Name Authors Name

line 1 (of Affiliation): dept. name of organization line 1 (of Affiliation): dept. name of organization
line 2: name of organization, acronyms acceptable line 2: name of organization, acronyms acceptable
line 3: City, Country line 3: City, Country
line 4: e-mail address if desired line 4: e-mail address if desired

Authors Name Authors Name

line 1 (of Affiliation): dept. name of organization line 1 (of Affiliation): dept. name of organization
line 2: name of organization, acronyms acceptable line 2: name of organization, acronyms acceptable
line 3: City, Country line 3: City, Country
line 4: e-mail address if desired line 4: e-mail address if desired
 Abstract— <Explain in about 200 words, the following> 1. Separately pointed out the specifications of the developed
Problem Statement - the existing system and the limitations of system.
the same 2. What is the project idea 3. How can the project
address the requirement 4. Mention the main technologies and Finally discuss the limitation or lacuna of your developed
tools used in the project. <Keep the description short and crisp !> prototype and how it can be resolved or improved in future.
*CRITICAL: Do Not Use Symbols, Special Characters, or Math in
Paper Title or Abstract. (Abstract) IV. CONCLUSION
Keywords—provide a maximum of 6 keywords (e.g. Arduino, Briefly summarize the problem that you addressed and
Vibration sensor, etc. ) what is your achievement.
The practical implication of the project and your
I. INTRODUCTION technology will help for advancing humanity.
Briefly state the objectives of the work and provide an
adequate background of the project. The Introduction should ACKNOWLEDGMENT
state the purpose of the investigation and must include If you got any help from your class teacher, technical
appropriate citations of relevant preceding work but should not assistants in Lab, your friends who helped you to implement
include an extensive review of marginally related literature. the project. All of you try to mention the following statement
The purpose statement should clearly outline how the work under this section: “All the group members would like to
relates to the advancement of existing problem. It should also acknowledge the ECE Lab and IIIT-NR for providing the
describe briefly the work presented in the paper. <Avoid a necessary resources and facilities to implement the project
detailed literature survey or a summary of the results.> successfully.”

II. SYSTEM DESIGN (E.G. SMART ROOM, SMART

DUSTBIN..)
REFERENCES
A. Block Diagram of the implemented System While implementing the project and writing the report if
you have taken help from Journal/conference papers, books,
Draw and describe your whole system in a schematic or
website, web article, newspaper, please refereed here one by
block diagram form and briefly explain it.
one as follows:
Mention the working principle of the implemented System. [1] Author names, “Title of the paper,” Journal Name, vol. no. , page
number (pp.) , Published Year.
B. Hardware and Sensor [2] Author names, Title of the Bookr, Publishing House, Published Year.
List the major component list briefly describe the hardware [3] Authore name, Title of the Web-Articles, Website link: , Year.
parts as follows. <No need to describe the basic circuit
elements like R, C, etc. >. {Suppose you are using Arduino, IR
Sensor, Temperature sensor, GSM Module, etc. then briefly
describe them in point by point}
1) Arduino: Brief descrioption of Arduino board. Model Instructions:
and specification of the board
1.thatReport
you are using.be within 4-6 pages according to above format and page style.
should
2. Write in your own words. Do not copy paste from others, even if you are using some circuit diagram from
2) IR Sensor module: Brief describe
net drawits working
it by principle,
yourself
its specification and how you3.areFrom
usingeach
in your project.
group there should be a single report mentioning the names of all the group members as
authors.
3) Temperature Sensor: 4.In similar
Consultway
and write about some
go through other IEEE paper (http://ieeexplore.ieee.org/Xplore/home.jsp) based on your
sensor and major hardware modules.project to get the detail idea about the writing process.
5. A Softcopy and a Hardcopy of the report should be submitted by 12th May, 2017. Softcopy should be
mailed by 12th May, 6.00PM.
III. EXPERIMENTAL PROTOTYPE
Hardware circuit implemented on PCB board (Provide a
Picture of your PCB circuit)
Briefly describe the experimental prototype and toy-model
of the project.
Provide the necessary pictures of the prototype model and
explain it.
Finally highlights the results of your project and discuss the
results.