0% found this document useful (0 votes)
251 viewsAuto Data
Technical data
Uploaded by
posmarichardCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
251 viewsAuto Data
Technical data
Uploaded by
posmarichardCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 16
®
ee
TRANSMITTERS NUUSGSS) OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
SST70 / SST5O Smart Torque Tube Level / Interface / Density Transmitter
‘The transmitter series SST70 (Ex-d) and SST5O (Ex-ia) measures liquid
levels, density and interface levels in closed or open vessels, It converts
buoyant force exerted by a displacer immersed ina liquid toa proportional
current signal thanks to a mechanical forces transmission device based
fon a torque tube and a piezoresistive sensor. The Spriano measuring cell
contains the sensor and transmits the pressure to the electronics. Thermal
Grift is compensated using the temperature signal generated by a PTC
thermistor integrated in the sensor itself Based on these readings the
microprocessor generates the 4-20mA analog output “two wires system”
and displays the pressure measurement on the LCD. Configurations and
adjustments can be made remotely using HART. or FOUNDATION FIELDBUS®
protocol compatible communicators.
CE @® @ sty Harr Fe
42.56 20Vde
‘Analog 4 20mA, 2 wites I Digital using HARTS or FIELOBUS® protocol
From 0+ 386mm (14") to 0+ 3048mm (120%)
550 Ohm 0 24 Ve
Total accuracy: © £0.58 FS inluding hysteress,nontinearty and repeatability (IEC 60770)
Response time (63% FS): «256 ms (standard Harta)
Zero thermal = 20.256/10"¢
= £0.258/10°C of Nominal Range
(8 60 (minimum response time 0.15)
Long teem stability: = 20.1 8 F5/year
Process temperature: 60 150°C (with faved arm FJacketing : -196 + 400°C)
“Ambient / Storage temperature: 40+ 85°C /-40 + «50°C
Le display reading: 10+ 65°C
Housing: Diecast aluminum ally EN AY-6082 frshed with epoxy resin / 55 SI 316
Ingres protection degree: [P66 suitable for topical climate operation as defined by DIN $0015
Relative Humidity: 0» 1008 RM.
Process connections: ‘1 APL DIN I Flanged RF FF, RT, Screwed, Socket Welded
Upto PN 400 /aNSt 2800 / Apt 10000
SSASI316 + Hastelloy C276, Full Hastelloy C276, Inconel 600, Inconel 625
Cartoon steel (WCC, WCB, LCB, Stainless Stee (55 AISI 308, 316, 321), Duplex & Super
Body / Cage materia: plex alloys, Mastelloy (8, C276), Inconel 625
Body / Cape painting: Standard on equest for Offshore application according 10 MR
Allowable tests on materials: 3.1, Hydrotest, NACE, PWHT, HI, SSC, Pl, NDT, Steliting, Nilay coating
ACCESSORIES
SPRIANO® TECHNOLOGIES a TERRANOVA® SRL brand
Italy - +39 0377 911066 - www.spriano.it - [email protected] @SPRIANS OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS [ULE EI Uuutl
TRANSMISSION OF PRINCIPLE
‘The operation of this element level meter is based on the hydrostatic,
thrust. A cylindrical body (incorrectly called float) immersed in the liquid
<——susr under control, gets a boost upwards equal to the weight of the volume of
liquid displaced (buoyancy). The variations ofthis thrust, the lat being of
cylindrical shape, are directly proportional to changes in the Level or the
specific weight. Even the apparent weight of the flaat (equal to its actual
‘eight reduced by the buoyancy) varies with the level and can therefore
on —S be taken as a measure of the level itself. The apparent weight of the float
can be measured by means of rotation of a tube to twist elastically urged
by a lever, so that the elastic reaction of the tube balances the weight
of the float. The system level meter is thus constituted, essentially, by @
displacer, a lever, a torque tube and a shaft that transmits the rotation
‘<——cowecrns fo of the tube to a system of proximity of the piezoresistive sensor. Is thus
fares obtained to transform the variations in level or of a specific weight in
S&S proportional rotation of a lever.
‘When the liquid level reaches the displacer, the latter in the absence of any buoyancy, rests with all its weight
‘on the lever (torching so the most of the tube) and is disposed in the Lowest position (minimum level)
When the level increases an increasing part of the float fs immersed in the liquid, the F
Level buoyancy increases and decreases the apparent weight of the float, the float rests therefore
with @ weight less and less on the lever reduces the twist of the tube. at
‘When the liquid level reaches the top of the float, the latter, being the hydrostatic pressure
at its maximum value, will impinge with a minimum weight on the lever (that wil twist to the minimum the
tube) and it will have in the highest position (maximum level).
SSPRIANO® Torque Tube Level Transmitters SST70 (Ex-d) and SST5O (Ex) Series are based on the measurement of the hydrostatic
‘thrust exerted by the process fluid on a displacer of know size and weight. The transmitter is factory calibrated and reports on
the plate all calibration data, Unless otherwise specified in the order is delivered with the following configuration:
Lower liquid density (or ‘Upper Range Value’ URV of span): 1,42 kg/l
Higher liquid density (or ‘Lover Range Value” LRV of span): 0 kg/t
Minimum Span: 0.1 kg/l for Electronic Type, 0.5 kg/| for Pheumatic Type
Measuring Unit: %, mm, in
INFLUENCE,
biscacen even secon waren | orvarony | (Wrtuence, | rari ato
TRANSMITTER rosmon orsenson | Hansen | OFSL2SHNG | TYPE OE
Tone
z Texte ily
E motte woateg | ostevh Upto proce
a Sonic tcated | fis vice rig 12500
e oat | ede fares
ae surance oni |"ecaatang [Nome | none Sans tpi,
E; rmumaccuscyand | Hasttoyc Bottonside, to
2 relbity Fatty ¢ veto
g “Full Inconel 600
Tepe | Te antago
Sires |e
- ono is Proce rating i
£ Nine nthe (nance the | hatadepts | othe type
a teromognctc | cnt ag | econ
Hy vein the proces [Sean nom, |Srcrcen the | anantatqce | Ss, and te
He bayer [eae panes [iste | pasion
mms Secompatote [S620 [tthe Tan
2 Tineth naan | eamfrmes | isis wy te [7 Soon
be ‘vapors, and this not | 30,"0 Stan: Treasrement | executions cannot
a a dardization | liquid is to be
always bs possible. | oF parts is dynamically Eid
posite [sae
SPRIANO® TECHNOLOGIES a TERRANOVA® SRL brand
Italy - +39 0377 911066 - www.spriano.it - [email protected] TMU) OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
TYPE OF MEASURE
Depending on the configurations set by the customer, itis possible to perform three types of measurement:
LEVEL MEASUREMENT.
is measured by the postion of the process level referred to the mounted displacer. To obtain the pe
measurement of the liquid level in the tank, the density of the process liquid p1 must be set in the
URY, while the LRV shall be set at the value ofthe vapors p2, usually close to zero. The PY will be the
‘measure of the level reached by the liquid on the dsplacer in of displacer length or in IU indicating
the measurement achieved on the displacer (mm, em, m, inch, feet).
Note: the displacer does NOT need to be fully submerged by fluid
DENSITY MEASUREMENT
It is measured by the density of the liquid contained in the tank.
“The LRV value is the minimum density of the process fluid, and the URV is the maximum density of -
the process fluid to be set.
The PV will be a percentage of the density of the process fluid with respect to the span (URV - LRV)
oF the measurement of the density in kg/l. :
Note: the displacer ALWAYS needs to be fully submerged by fluid
INTERFACE MEASUREMENT
It is measured by the position of the interface level between two immiscible liquids referred to the
‘mounted displacer. To measure the position of interface between two immiscible liquids, the density
of the LAV (p2, lighter liquid) and URV (ot, heavier liquid) must be set. The PY will be the measure of
the level reached by the liquid on the displacer in of displacer length indicating the measurement
achieved on the displacer (mm, cm, m, inch, feet). 7
‘The difference of density must follow the following formula Specific gravity ofthe Heavier fu ~ pt
p= pl = p2= 0.1 ¢ 1.42 Kg/l, where alvrays pt>p2. Speci gravity ofthe Lighter fd = p2
Note! the displacer ALWAYS needs to be fully submerged by fluid
Limitations between Eleetranie and Pneumatic instruments when they are used as INTERFACE measurements
Electron Level Contoler + Poeumatie Level Controller
SPRIANOS SST50/SS770 instrument 1 SPRIANO® 65L instrument
The atference of density must follow
the following formula
The dtfeence of density must follow
the following formula
4p ~pt-p2= | 4p = pl - 62.»
Ons 1.42 Ke ose 1.4 Kel
IMPORTANT HINT! |
‘The acceptable difference (Ap= p-p2) between these two densities is different depending if we use an electronic instrument
(65750/SST70) or a pneumatic one (651). |
“The pneumatic technique has less accuracy and resolution on the mechanical movement, hence itis more limited on the lower
‘ps. If low dps with pneumatic output stil are in need to be measured, the electronic solution should be adapted, eventually
re-converting again the electronic output in pneumatic output with an I/P Converter |
SPRIANO® TECHNOLOGIES a TERRANOVA® SRL @SERANE OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS [ULZ NE UUCi Sieg
DIMENSIONAL DRAWINGS
REFERENCE TABLE
face tom stn |e | Se | Se | ae | eet | te | at | Ue | ho
x er _| os] ros | | see | ame | eae | om | ne
c aoa [ssf ser) | mae [toaster |e | eee
r > ror} 055] 188 | m2 | 204 | 207 | 249 | 210 | 303
WaT a = [os fo [| ae ff» | s |»
a wor] ass | tose | 56 | se | 20 | axr9 | am | ned
3 sax_[ 77 | 1000 | —r20 [arnt | 2one [at 2eas [3s
1 < vv] 35 | a7 | exo | 1e2 | 15 | 1067 | n10 | 1504
> eet [ 9058 tse | eto | ae ae [arm |
WEIGHT Mal 2 [os |» |« |« | «| 0 | 9 | =
- 766 | oad | tas | seas | toee | ase ase | tee |e
8 as] 79 | mm _| me | ves | roe_| me | ase | air
fa € Ea
> 6s _|s0_| 1923 | 1 | mom | m9 | 6a | aoee | 580
WEIGHT = |» >» |e«|« |«* | |] 5 | «
A 71 | oro | 1173 | 1579 | asa | 21a _| 2a _| 2708 | 308
” c va 308 [a7 | eto [reas | seer | ave |e
> 16 | toro | 17r3_| 107 | 1904 | 2209 | 2594 | 2000 | 2508
wana = >>» |el«)«|s2)]s | «
TRAX DSPACE DANETER CE ET ESE
a WEIGHT Fal 5
u WEIGHT 2 Ty
SOOT
OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
SST76 / SST56 Smart pressure transmitter
supply
Output signa:
Measuring range:
Max toad
Total accuracy:
Response time (63% FS):
Zero thermal drift
Span thermal dl
Damping:
Long term stability:
Leb atsplay reading:
Housing
Ingress protection degree:
Relative Humidity:
Process connections:
MEASURING RANGE & SPAN LIMITS
SST76 / SSTS6 series SMART pressure transmitters can be remotely
configured by 2 universal hand held terminal (HHT) or by @ PC with a
dedicated interface. Moreover, it is possible to locally configure the
instruments (zero and span) by means of 4 push buttons and to display
the data on the wide LCD display. These transmitters, complete with
diaphragm in AISI 316, measure relative pressure with spans from 0,02
to 401bar. The pressure measuring element is a piezoresistive sensor. It
is possible to choose a variety of sensors to satisfy all process conditions.
The Spriano® measuring cell contains the sensor and transmits pressure
to the electronics. Based on these readings the microprocessor generates
‘the 420A analog output “two wires system” and displays the pressure
measurement on the LCD. Configurations and adjustments can be made
remotely using HART® or FOUNDATION FIELDBUS® protocol compatible
oe CEB 8) MARTE
125+ 30Vde
‘Analog 4 20mA, 2 wires! Digital using HART® or FIELOBUS® protocol
From 0 + 0,35 bar to. +1000 bar
550 Ohm @ 24 Ve
<0.07% FS (0+ 80°C), 0.28 FS (0+ 40°C) including hysteresis, nonlinearity and
Fepeatabilty (IE 60770)
«= 256 ms (standard Hart®)
= £0,16/10°C
< £0,16/10°C of Nominal Range
10 60 (minimum response time 0. 5)
= 20.1 8 F5/year
40+ 85°C (with finned arm: up to 130°C; wth phon: upto 235"
up to 283°¢)
40+ 85°C 1-40 + 90°C
10 65°C
Diecast aluminum alloy EN AV-6082 frished with epoxy resin / 551316
[P66 suitable for tropical climate operation as defined by DIN 50015
0 100% Ri
‘NI APL DIN 1 Flanged RF FF, RT, Serewed
Stainless Stel, fix on housing
In case of malfunction the outputs forced to alsa state 3.88 mA 21 ma
with eaplary:
Transmiter Nominal Range Span Limits ange Limits verpressure
Type cr nna toad ana tar) Max (ba
SST56 /SS176 010.35 0.023107 °0,35/0,35 10
5186 155176 ot 0.06772 20
55156 / 55176 0725 On7/3.5 0
55156 /S8176 OS 02/6 50
SST36 /SST76 ono oer o
55156 / s5176 0130 3.033731 150
$5156 / $8176 0/100 3,37/101 200
$5186 55176 07200 era 0)
35156 / $5176 0/400 134/401 200
5156 o7i0007 33/3008 1500 @SERANO OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS JULY EIU
LCD INTERFACE WITH CONFIGURATION MENU,
+ Menu security with password
+ Direct communication between HART® commands and display functions
+ Immediate visualization for temperature of instrument and sensor (optional)
* Bar graph with full scale indication
Bi esscnsrn sw s0a
[i weasune ois otc)
Bi sessunne unr
Hives extenne
Bi cioice san nar x span
[il cuzcrronic soano renvenaTure o1P13
[Bi sevson renpenarure bispcay
DIMENSIONAL DRAWINGS
©
SST76 1" NPT-M screwed fr Ps upto 20 bar {S176 14" NPT screwed for Ps up to 30 bar
= pres
- Her 4 4
eles
55756 with various process connections complete with
SPRLANOS Ex PLUG PLUx Seree MGUOETTUAISS) OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
SST77B / SST57B Smart differential pressure transmitter
SST77B / SSTS7B series SMART differential pressure transmitters are
micropracessor-based instruments that combine the analog signal
advantages (4-20mA) together with the flexibility of digital communication
Using HART® or FOUNDATION FIELOBUS® protocol.
‘The SST77B transmitters measure differential pressure with spans from 1,2
0-20.00 mbar with a static pressure up to 200 bar (400 bar as option). The
pressure measuring element isa piezoresistive sensor and itis possible to
choose a variety of sensors to satisfy all process conditions.
The Spriano® measuring cell contains the sensor and transmits pressure
to the electronics. Thermal drift is compensated using the temperature
a signal generated by a PTC thermistor integrated in the sensor itself. Based
( fn these readings the microprocessor generates the 4-20 mA analog autput
eRe two wires system and displays the pressure measurement on the LCD,
mw
CEO se) waar Ee
supply: 4250 30Vde
Output sian: ‘Analog 4 20mA, 2 wires Digital using HART® or IELOBUS® protocol
Measuring range: From 0+ 18 mbarto0+ 10 bar
Max load: 1580 Ohm @ 24 Ve
Total accuracy: << £0.16 FS inludinghysteress, nontneaty and repeatability (IEC 60770)
Max state pressure (18-50 mbar): 50 bar on ether side
Max state pressure (350-10000 mbar}: 100 baron either side
Response time (63% FS): «< 256 ms (Standard Hart®)
Zero thermal drift: = £0,1N/10°C
Span thermal det: = £0,16/10°C af Nominal Range
Damping: (0 605 (minimum response time 0.15)
‘Long term stability: 20.1 8FS/year
Process temperature: 40+ 85°C (with capillary: yp to 283°C)
Ambient / Storage temperature: 40 # 585°C 1-40 90°C
Leb elsplay reading: 0 65°C
Housing Diecast aluminum alloy EN AY-6082 fished with epoxy resin / 55S! 316
Ingress protection degree: [P66 suitable for tropical climate operation a defined by DIN 50015
Relative Humidity: 0» 1008 RM.
Process connections: 2 1/4° NPT (Standard) 2 1/2" NPT
Nameplate: Staines Stel, fixed on housing
Self test: In case of malfunction the output is forced to failsafe state 3.85 mA /21 mA
MEASURING RANGE & SPAN LIMITS
“ranamitter Nominal Range Span Limits Range Limits
Type (enbar) nina bar n/n br)
$5757 / SST778 one 112736 18/+18
S51578 /SST778 0150) 337/100 0780
SSTS7B / SST77B 0/350 23/700, 350/+350,
$5157 / SST778 ‘1000 6712000 7000/1000
‘SSTS78 / SST77B (0/2500 1¥67/5000 2800/+2500
‘S157 / SST778 (7/5000 333710000 5000/5000
SST57@ / SST778 710000, 667/20000 10000/+10000 @SERIANS OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS JULY EI IMUIGCE
TYPE OF MEASURE
Depending on the configurations set by the customer, it is possible to perform three types of measurement:
DIFFERENTIAL PRESSURE MEASUREMENT
‘The simplest function of SSTX7B transmitters is to measure differential pressure up to 10000 mbar introduced by a Venturi, an
Orifice plate of simply by a water column into a tank.
S5TX7B series can withstand up to 200 bar static line pressure (optional up to 400 bar).
LEVEL MEASUREMENT IN PRESSURIZED TANKS
Its possible to measure the liquid column into pressurized tanks by using Ranged diaphragm seals with capillaries,
The “+” side must be connected at the bottom of tank and the "-" side at the TOP part of i.
By using Stevina’s Law Pepgh itis possible for SSTx7B transmitters to get the level ofthe tank whatever isthe pressure inside of i.
FLOW MEASUREMENT WITH AUXILIARY MEASURING ELEMENTS
‘By measuring differential pressure los introduced by a Venturi or an Orifice plate, SSTX7B series can calculate the Volumetric flow
inh,
The only datas required by the transmitter in order to perform the calculation are the maximum AP and the maximum volumetric
flowrate associated to it.
DIMENSIONAL DRAWINGS
SST578-1/4" NPT screwed process connections complete with 551778 1/2" NET screwed proces comections complete with
2" mounting bracket and SPRIANOS Ex-d PLUG. 2 mounting bracket and SPRIANOD Ex PLUG. MGUOETTUAISS) OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
SST77BL / SST57BL Smart DP level transmitter
SST77BL / SSTS7BL series SMART DP level transmitters are microprocessor:
based instruments that combine the analog signal advantages (4-20mA)
together with the flexibility of digital communication using HART® or
FOUNDATION FIELDBUS® protocol.
‘The SST77BL transmitters measure a liquid level head with spans from
1.2 to 10.000 mbar also with a static pressure. The pressure measuring
element is a piezoresitive sensor. It i possible to choose a variety of
sensors to satisfy all process conditions.
‘The Spriano® measuring cell contains the sensor and transmits pressure
to the electronics. Thermal drift is compensated using the temperature
signal generated by a PTC thermistor integrated in the sensor itself. Based
fn these readings the microprocessor generates the 4-20 mA analog autput
two wires system and displays the pressure measurement on the LCD,
CEO se) waar Ee
supply: 4250 30Vde
Output sian: ‘Analog 4 20mA, 2 wires Digital using HART® or IELOBUS® protocol
Measuring range: From 0+ 18 mbar to 0+ 10 bar
Max load: 1580 Ohm @ 24 Ve
Total accuracy: << £0.16 FS inludinghysteress, nontneaty and repeatability (IEC 60770)
Max stati pressure (18-50 mbar): 50 bar on ether side
Max state pressure (350-10000 mbar}: 100 baron either side
Response time (63% FS): «< 256 ms (Standard Hart®)
Zero thermal drift: = £0,1N/10°C
Span thermal det: = £0,16/10°C af Nominal Range
Damping: (0 605 (minimum response time 0.15)
‘Long term stability: 20.1 8FS/year
Process temperature: 40+ 85°C (with capillary: yp to 283°C)
Ambient / Storage temperature: 40 # 585°C 1-40 90°C
Leb elsplay reading: 0 65°C
Housing Diecast aluminum alloy EN AY-6082 fished with epoxy resin / 55S! 316
Ingress protection degree: [P66 suitable for tropical climate operation a defined by DIN 50015
Relative Humidity: 0» 1008 RM.
Process connections: {N61 / APL DIN 1 Flanged RF, F, RT starting from 2"
Nameplate: Staines Stel, fixed on housing
Self test: In case of malfunction the output is forced to failsafe state 3.85 mA /21 mA
MEASURING RANGE & SPAN LIMITS
“ranamitter Nominal Range Span Limits Range Limits
wpe (enbar) nina bar n/n br)
$5757 / SST778 one 112736 18/+18
S51578 /SST778 0150) 337/100 0780
SSTS7B / SST77B 0/350 23/700, 350/+350,
$5157 / SST778 ‘1000 6712000 7000/1000
‘SSTS78 / SST77B (0/2500 1¥67/5000 2800/+2500
‘S157 / SST778 (7/5000 333710000 5000/5000 @SPRIAND OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS.
DIMENSIONAL DRAWINGS
‘SSTS7AL Standard Execution
me armeuredcaotares
3 mc arrears |
Fung on 10 par: |] | uncon roe pure:
SACO 2004 208°C)
Sieme ro comC)
eo
o
[21/2 ANSI
PONS aga
eros: ssa 7]
° -
See eS moan
~ ouput $5821
‘SSTS78 with them expanders to be used for Ts upto 370°C. PEM OPUS) OIL & GAS | PETROCHEMICAL | FERTILIZATION | POWER PLANTS @SPRIANO
SST72 / SST52 Smart temperature transmitter
$8172 / SST52 series SMART temperature transmitters are microprocessor:
based instruments that combine the analog signal advantages (4-20mA)
together with the flexibility of digital communication using HART® or
FOUNDATION FIELDBUS® protocol.
‘These transmitters are able to accept 3 wires Pt 100 ohm resistance
. thermometers and total accuracy is depending on class of the sensors
utilized such as DIN A, DIN B, 1/3 DIN, 1/5 DIN,1/10 DIN ete.
Based on these readings the microprocessor generates the 4-20 mA analog
output “two wires system" and displays the temperature measurement on
the Leo.
supply: W250 30Vde
Output signal: ‘Analog 4~20mA, 2 wires Digital using HARTS or FIELOBUS® protocol
Nipple-Union Nipple: Tmax = 150°C, Remote: Tmax = 350°C or 500°C ()
580 Ohm @ 24 Ve
Total accuracy: [DGT + ePTI00 including hysteresis, non-tinearity and repeatability (EC 60770)
Digital accuracy (eD6T} = £0.18F5 / 100°C
‘Thermoclement accuracy (€PT100): see below table “Tolerance classes for PTI00 thermocouples (IEC7S1)
Response time (63% FS) = 256: (Standard Het)
Zero thermal drift: = £0)1N/10°C
Span thermal dit: << £0,16/10°C of Nominal Range
Damping: (0 60 (minimum response time 0.15)
Long term stability: = £0.1 6F5/year
Process temperature: 40 + 85°C (remote: upto 350°C; remote and thermowell up to 500°C)
Ambient / Storage temperature: 40 # 85°C 1-405 +90°C
Leb display reading 0+ 65°C
Housing: Diecast aluminum alloy EN AV-6082 ished with epoxy resin / $5 ASI 316
Ingress protection degree: [P66 suitable for tropical climate operation a defined by DIN 50015
Relative Humic 0 1008 RIK.
Process connections: ‘51 APL DIN / JI Flanged RF, FF, RTJ, Screwed (through thermowell)
Staines Stel, fixed on housing
In case of malfunction the outputs forced to failsafe state 3.85 mA /21 mA
350°C f about the instalation without thermowell,Tmax = 50°C is complete with thermowel
‘TOLERANCE CLASSES FOR PT100 THERMOCOUPLES (IEC751)
TeneraTure('c) | casset: °c] CUSSALe“C] 13 “C) 1/5 DWN [2 °C} soot:
200 1 0.55 oe 0.26 on
7100) 08 0.35) 027 016 0.06;
0 03, 0.5 oH 0.06 0.03.
700 08. 035) 027 016. 0.08
200 13 0.55 oe 0.26 on
300 18. 075. 06 0.36 038:
00 22 0.95 77 0.46 0.23
500 28 15 094 0.56 028
00 33, 135 “A 0.6 033
80 36 1a 42 an 036 @SPRIANS OIL & GAS |
TOTAL ACCURACY
ow
i,
f
gu
3
i »
i
i.
DIMENSIONAL DRAWINGS
S|
ZS:
te / €8.0)
|
Coe
T
‘srs
sand een,
bw
PETROCHEMICAL | FERTILIZATION | POWER PLANTS
SUC
Total instrument accuracy eTOT is given
by the formula
ETOT =
