Scribd
Upload
220 views3 pages

Kode Error Mesin Fotocopy RICOH

This document provides a list of error codes for Ricoh photocopy machines along with their descriptions and potential causes. It includes over 50 error codes grouped into categories related to issues with the scanner, image processing, heating components, controls, and boards/software. Instructions are also provided for resetting common error codes on Ricoh and other brands of photocopy machines.

Uploaded by

ris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
220 views3 pages

Kode Error Mesin Fotocopy RICOH

This document provides a list of error codes for Ricoh photocopy machines along with their descriptions and potential causes. It includes over 50 error codes grouped into categories related to issues with the scanner, image processing, heating components, controls, and boards/software. Instructions are also provided for resetting common error codes on Ricoh and other brands of photocopy machines.

Uploaded by

ris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Kode Error Mesin Fotocopy RICOH

CODE ERROR MESIN FOTOCOPY RICOH & CARA RESET ERROR RICOH
Troubleshooting Service Call Conditions

Berikut ini cara reset pada mesin fotocopy Ricoh Gestetner Lanier dan Savin (SC
Error Code Resett) semoga dapat membantu anda.

1. Tekan tombol kuning 2x


2. Tekan 107
3. Tekan tombol C tahan 5 detik
4. Masuk mode service pilih copy(1)

Berikut ini daftar SC Code mesin fotocopy ricoh:

Dibawah ini adalah tabel code error mesin fotocopy analog ricoh untuk tabel code error
digital tidak begitu berbeda jauh hanya ada sedikit penambahan dan pengurangan, belum
sempat saya posting lain waktu akan saya siapkan.

KERUSAKAN BAGIAN SCANNER

SC101 (Exposure Lamp Error)


SC120 (Scanner home position error 1)
SC121 (Scanner home position error 2)
SC143 (SBU white/black level correction error)
SC144 (Communication Error between BICU and SBU)
SC145 (Automatic SBU adjustment error)
SC193 (Image transfer error)
SC198 (Memory address error)

KERUSAKAN BAGIAN IMAGE

SC302 (Charge roller current leak)


SC320 (Polygonal mirror motor error)
SC321 (No laser writing signal (F-GATE) error)
SC322 (Laser synchronization error)
SC390 (TD sensor error)
SC391 (Development bias leak)
SC392 (TD sensor initial setting error)
SC401Transfer roller leak error 1
SC402 B Transfer roller leak error 2

KERUSAKAN BAGIAN PEMANAS

SC500 (Main motor lock )


SC502 (Tray 2 lift motor malfunction (Optional paper tray units)
SC503 (Tray 3 lift motor malfunction (optional paper tray units)
SC504 (Tray 4 lift motor malfunction (optional two-tray paper tray unit)
SC506 (Paper feed motor lock (optional paper tray units)
SC541 (Fusing thermistor open (center)
SC542 (Fusing temperature warm-up error (center)
SC543 (Fusing overheat error (center)
SC544 (Fusing overheat error (center) 2
SC544 Fusing lamp overheat error (center)
SC546 (Unstable fusing temperature (center)
SC547 Zero cross signal malfunction
SC551 Fusing thermistor open (rear)
SC522 Fusing temperature warm-up error (rear)
SC553 Fusing overheat error (rear)
SC555 Fusing lamp overheat error (rear)
SC556 Unstable fusing temperature (rear)
SC559 Jam error detected 3 times in succession
SC590 Left exhaust fan motor error
SC591 Rear exhaust fan motor error

KERUSAKAN BAGIAN CONTROL

SC620 Communication error between BICU and ADF


SC621 ADF connection error
SC632 Accounting error 1
SC633 Accounting error 2
SC634 Accounting RAM error
SC635 Accounting battery error
SC670 Engine start error
SC692 Controller board communication abnormal
SC694 Controller board communication abnormal
SC760 ADF gate abnormal 1
SC761 ADF gate abnormal 2
SC762 ADF gate abnormal 3
SC800 Startup without video output end error
SC804 Startup without video input end
SC818 Watchdog error
SC819 controller firmware again
SC820 Self-Diagnostic Error: CPU
SC821 Self-Diagnostic Error: ASIC
SC823 Self-diagnostic Error: Network Interface
SC824 Self-diagnostic Error: NVRAM
SC826 Self-diagnostic Error: NVRAM/Optional NVRAM
SC827 Self-diagnostic Error: RAM
SC828 Self-diagnostic Error: ROM
SC829 Self-diagnostic Error: Optional RAM
SC838 Self-diagnostic Error: Clock Generator
SC850 Network I/F Abnormal
SC857 USB I/F Error

KERUSAKAN BAGIAN BOARD/SOFTWARE


SC900 Electrical total counter error
SC901Mechanical total counter
SC903 Engine total counter error
SC920 Printer error
SC921 Printer font error
SC928 Memory error
SC954 Printer application program error
SC955 Image transfer error
SC964 Status error (laser optics housing unit)
SC981 NVRAM error
SC982 Localization error
SC984 Print image transfer error
SC990 Software performance error
SC991 Software continuity error
SC992 Unexpected Software Error
SC997 Application function selection error
SC998 (RAM board) is not installed
SC999 Program download error

You might also like