Scribd
Upload
73 views

Report Seminar Format

This document is a seminar report submitted by Diksha Kulkarni, an electrical engineering student at Chh. Shahu College of Engineering, for her Bachelor of Electrical Engineering degree from Dr. Babasaheb Ambedkar Marathwada University. The report focuses on switch gears and protection and was prepared under the guidance of Assistant Professor N. R. Thakre. It includes certificates of approval from the guide, head of department, and principal of the college to verify that the report satisfies academic requirements.

Uploaded by

dattatray kulkarni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
73 views

Report Seminar Format

This document is a seminar report submitted by Diksha Kulkarni, an electrical engineering student at Chh. Shahu College of Engineering, for her Bachelor of Electrical Engineering degree from Dr. Babasaheb Ambedkar Marathwada University. The report focuses on switch gears and protection and was prepared under the guidance of Assistant Professor N. R. Thakre. It includes certificates of approval from the guide, head of department, and principal of the college to verify that the report satisfies academic requirements.

Uploaded by

dattatray kulkarni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 21

Dr.

Babasaheb Ambedkar Marathwada University


University Campus, Aurangabad, Maharashtra, 431004

A SEMINAR REPORT ON
“SWITCH GEAR AND PROTECTION”

Submitted by
Diksha kulkarni [TEEE 331]

Under the Guidance of

Asst. Prof. N. R. Thakre


Electrical Engineering Department

For the partial fulfillment for the award of


BACHELOR OF ELECTRICAL ENGINEERING

CSMSS
CHH.SHAHU COLLEGE OF ENGINEERING
Kanchanwadi, Aurangabad – 431005
Electrical Engineering Department
(2018-19)
CSMSS
CHHATRAPATI SHAHU MAHARAJ SHIKSHAN SANSTHA’s
CHH. SHAHU COLLEGE OF ENGINEERING
Approved by AICTE New Delhi, DTE (Govt. of Maharashtra) and affiliated to Dr. B.A.M.University,
Aurangabad. Kanchanwadi, Paithan Road, Aurangabad 431 002 (M.S)
Ph. No. : (0240) 2379248, 6646463 Fax: (0240) 2379015
Email: [email protected]. [email protected]. Website: www.csmssengg.org.

CERTIFICATE

It is a bonafide work carried out by Diksha D. Kulkarni (EE331) in partial fulfillment for the
award of degree of Bachelor of Engineering in Electrical (TE) of the Dr. Babasaheb Ambedkar
Marathwada University, Aurangabad during the academic year 2018-19. It has been certified
that all the corrections and suggestions has been incorporated in the report. The seminar
report has been approved as it satisfies the academic.

Guide HOD Principal


Prof. N. R. Thakre Prof. A. N. Mudiraj Dr. U.B. Shinde

Examiner:

1.

2.
ACKNOWLEDGEMENT

It gives us a great pleasure to submit this seminar report. This is the only page where we have
the opportunity to express my emotions and gratitude from the bottom of my heart.

We express our sincere thanks to our guide Prof. N. R. Thakre sir for guiding us at every
step in making of this project. He/she motivated us and boosted our confidence and we must admit
that the work would not have been accomplished without his guidance and encouragement.

We are also thankful to seminar coordinator Prof. N. R. Thakre sir for guiding and
encouraging us as per requirement.

We would like to extend our special thanks to HOD Prof. A. N. Mudiraj sir and principal
Dr. U. B. Shinde sir for spending their valuable time to go through our report and providing many
helpful suggestions lastly we would like to thank all the staff member of Electrical Engineering
Department and our friends without whom the project report would not have been completed.

Diksha D. Kulkarni (TEEE331)


T.E. (Electrical Engineering)

You might also like