Scribd
Upload
371 views17 pages

Geeek A50 Installation Guide

This document provides a list of screws and their uses for assembling a computer case. It includes 14 steps with diagrams showing where each type of screw goes. The various screw sizes and lengths are labeled A through I and are used to mount components like the fan, power supply, motherboard, graphics card, hard drives, and panels. Proper installation is ensured by following the numbered steps and using the correct screws in the designated locations.

Uploaded by

Brian Lagason
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
371 views17 pages

Geeek A50 Installation Guide

This document provides a list of screws and their uses for assembling a computer case. It includes 14 steps with diagrams showing where each type of screw goes. The various screw sizes and lengths are labeled A through I and are used to mount components like the fan, power supply, motherboard, graphics card, hard drives, and panels. Proper installation is ensured by following the numbered steps and using the correct screws in the designated locations.

Uploaded by

Brian Lagason
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

SCREWS LIST

A B C D

25mm 2X Screws for Fan M3 Nuts


M3.5x10mm
30mm 4X For PSU Mounting
With M3x8mm for
40mm 4X Aluminum Frame

E F G H I

M4x14mm M4x8mm M3x8mm M3x5mm M3x10mm


For Aluminum Frame with M3 Nuts for Aluminum For Motherboard, PCIe
For GPU, Aluminum Frame Frame, 2.5” SSD
For Standoffs
Mounting

*The images is for reference only; actual placement for the screws are based on the real product. Users can adjust the placement of the screws according to the
installation guide.
Aluminum Frame
Installation Screw

Acrylic
Panel

Nut

Please read the “Aluminum Frame


installation”before assembling this case
STEP 01 Aluminum Frame Installation

E 4X
STEP 02 Install the Standoffs on the Left Upper and Lower Side Brackets

I 2X

G 2X
40mm 4X
STEP 03 Install the Step 2 on Left Upper and
Lower Aluminum Frames

D 6X

G 6X
STEP 04 Install the HDD Bracket on the Right Aluminum Frame

D 4X

G 4X
STEP 05 Install the Rear Panel

F 4X
STEP 06 Install the Power Extension Cable

2X
Note: The screws here are them same as the footpad
screws. They will usually placed together.
STEP 07 Install the Bottom Panel

4X

G 6X

D 6X

Note: Screws for the footpad will be placed with the


footpad in one package.
STEP 08 Install the Motherboard

H 4X
STEP 09 Install the PCIe Riser Cable
(Optional Purchase)

PCI-e Riser Cable


(Optional Purchase)

H 2X
I 2X 25mm 2X
STEP 10 Install and Secure the Graphic Card

F 2X
STEP 11 Install the Power Supply Bracket

30mm 4X
C 4X

G 4X
STEP 12 Install the Power Supply
I 4X
STEP 13 Install the 2.5”HDD
G 8X

F 4X
STEP 14 Install the Power Switch,
Front USB and Panel

F 4X

G 2X
STEP 15 Install the Side Panels

G 8X

You might also like