0% found this document useful (0 votes)
41 views

Lab Report On: SESSION: 2019-2020

This lab report summarizes an experiment conducted by Group 3 of the CH4 Batch to determine the viscosity of fluids using a viscometer. The report includes an introduction to viscosity, the experimental procedure, observations recorded, relevant calculations, and conclusions drawn from the results. The objective was to measure the viscosity of different fluids using a viscometer and understand how viscosity is affected by temperature.

Uploaded by

Mayank Agrawal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
41 views

Lab Report On: SESSION: 2019-2020

This lab report summarizes an experiment conducted by Group 3 of the CH4 Batch to determine the viscosity of fluids using a viscometer. The report includes an introduction to viscosity, the experimental procedure, observations recorded, relevant calculations, and conclusions drawn from the results. The objective was to measure the viscosity of different fluids using a viscometer and understand how viscosity is affected by temperature.

Uploaded by

Mayank Agrawal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LAB REPORT ON

_______________________________________________________________________________________________

_______________________________________________________________________________________________

SUBMITTED TO: SUBMITTED BY: CH4 Batch, Group 3

Dr. Rohidas Gangaram Bhoi MAYANK AGRAWAL

Assistant Professor 2017UCH1725

Performed On: ____________

Submitted On: ____________

DEPARTMENT OF CHEMICAL ENGINEERING

MALAVIYA NATIONAL INSTITUTE OF TECHNOLOGY


JAIPUR, RAJASTHAN (302017)

SESSION: 2019-2020
INDEX

SERIAL NO. CONTENTS PAGE NO.


1. OBJECTIVE
2. APPARATUS REQUIRED
3. INTRODUCTION
4. THEORY
5. EXPERIMENTAL PROCEDURE
6. FORMULA USED

7. OBSERVATION TABLE
8. CALCULATIONS
9. CALCULATION TABLE
10. RESULT
11. CONCLUSION
12. DISCUSSION
13. PRECAUTIONS
14. REFERENCES
15. EQUIPMENT LIMITATIONS

You might also like