VPCL 378
VPCL 378
FEATURES
• Forms clear and dry film, which renders attractive
appearance to protected parts
• Heat stable
• Displaces water from metal surfaces
• Easy to remove if necessary
• Eliminates cleaning and housekeeping problems associated
with oils
• Superior protection and complete replacement for rust-
inhibiting oils
• Emulsifiable, thus environmentally acceptable and safe to
apply
• Unique vapor phase action protects uncoated and difficult-
to-reach areas
• Economical - can be diluted up to 1 part VpCI-378 to 20
parts water
• User friendly
• Lubricating properties
METALS PROTECTED
• Carbon steel
• Stainless steel
• Cast iron
• Aluminum
• Copper and alloys
TYPICAL APPLICATIONS
• Castings, forgings, tubular parts, machined and honed
PRODUCT DESCRIPTION
metal components
VpCI-378 is a water-based concentrate designed as a
• Gears, pumps, electric motors, housings, textile and
complete replacement for oil-based corrosion preventives.
VpCI-378 forms a brown emulsion in water and is applied
printing equipment
to metal surfaces by spraying or dipping. The wide dilution • Precision machined parts, structural steel, sintered
range with water allows flexibility to customize the length of metals, bars and roll stock
protection required vs. applied cost. The protective coating is • Additive to parts washers and rinse water systems,
also translucent and in ambient conditions becomes dry-to- hydroblasting and hydrotesting
touch 30 minutes from application. VpCI-378 is designed • Use as a quenching fluid or in dipping applications
to be removed with Cortec® VpCI-414 or other conventional operating at elevated temperatures
alkaline cleaners.
LIMITED WARRANTY
All statements, technical information and recommendations contained herein are based on tests Cortec Corporation BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED
believes to be reliable, but the accuracy or completeness thereof is not guaranteed. USE, AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. No
representation or recommendation not contained herein shall have any force or effect unless in a written document
Cortec Corporation warrants Cortec® products will be free from defects when shipped to customer. Cortec signed by an officer of Cortec Corporation.
Corporation’s obligation under this warranty shall be limited to replacement of product that proves to be defective.
To obtain replacement product under this warranty, the customer must notify Cortec Corporation of the claimed THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED
defect within six months after shipment of product to customer. All freight charges for replacement products shall OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY
be paid by customer. OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CORTEC CORPORATION BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Cortec Corporation shall have no liability for any injury, loss or damage arising out of the use of or the inability
to use the products.
Distributed by: