30/8/2019 Mobile Telephony, Missed Call Alert, Activate

    OPERATIONAL INSTRUCTION         8/154 31-APR 101 49/5 Uen A    

Mobile Telephony, Missed Call Alert, Activate

Contents
1 Introduction
1.1 Scope

2 Procedure
2.1 Prerequisites
2.2 Actions

3 Additional Information
3.1 EOS Analysis and Announcement Data for MCA
3.2 IMSI Number Series Analysis Data for MCA

4 Glossary

5 References
5.1 Operational Instructions
5.2 Application Information

1   Introduction
1.1   Scope
This Operational Instruction describes the procedure to activate the Missed Call Alert (MCA) feature in Mobile Services
Switching Centre (MSC) / Visitor Location Register (VLR) server.

The availability of this feature depends on commercial agreements.

2   Procedure
2.1   Prerequisites

2.1.1   Conditions
The following condition must apply before this procedure can be completed:

A work order is received.

2.1.2   Data
The following data must be known to complete this procedure:

Indication whether a default Short Message Service - Service Centre (SMS-SC) or other SMS-SC addresses or both
are to be defined
Default SMS-SC address
Other SMS-SC addresses
Indication whether the originating address in an MCA SMS will be the called party number or the MSC address.

10.177.101.132/alexserv?id=8827 1/4
30/8/2019 Mobile Telephony, Missed Call Alert, Activate

2.1.3   Special Aids

No special aids are necessary for this procedure.

2.2   Actions

Check Whether a Default SMS-SC Address Profile Needs to be Defined

1. Should a default SMS-SC address profile be defined?

Note:   See the work order.

Yes  Go to Step 2.

No  Go to Step 4.

Define the Default SMS-SC Address Profile

2. Go to Operational Instruction Mobile Telephony, Missed Call Alert, Profile Data,
Define.

Perform the steps in that Operational Instruction, and return to Step 3 in this Operational Instruction.

Note:   See the work order.

Set AXE Parameter to Indicate the Default SMS-SC Address Profile

3. Go to Operational Instruction AXE Parameter Value, Change.

Perform the steps in that Operational Instruction, and return to Step 4 in this Operational Instruction.

Note:   Use parameters SETNAME=GSMMSSC and NAME=DEFMCASCADPR .

Note:   The value to be assigned to AXE parameter DEFMCASCADPR shall be set equal to the SMS-SC address
profile identifier used in Step 2.

Check Whether Other SMS-SC Address Profiles Need to be Defined

4. Are there other SMS-SC address profiles that need to be defined?

Note:   See the work order.

Yes  Go to Step 5.

No  Go to Step 6.

Define the SMS-SC Address Profiles

5. Go to Operational Instruction Mobile Telephony, Missed Call Alert, Profile Data,
Define.

Perform the steps in that Operational Instruction, and return to Step 4 in this Operational Instruction.

Note:   See the work order.

Set AXE Parameter to Indicate the Originating Address in an MCA SMS

10.177.101.132/alexserv?id=8827 2/4
30/8/2019 Mobile Telephony, Missed Call Alert, Activate

6. Go to Operational Instruction AXE Parameter Value, Change.

Perform the steps in that Operational Instruction, and return to Step 7 in this Operational Instruction.

Note:   Use parameters SETNAME=GSMSHSC, NAME=MCAMSCADDR and VALUE=0 if the called party number
(Mobile Station Integrated Services Digital Network (MSISDN) or Dual MSISDN) is to be used as
originating address or VALUE=1 if the MSC address is to be used as originating address.

Note:   See the work order.

Activate the MCA Feature

7. Go to Operational Instruction AXE Parameter Value, Change.

Perform the steps in that Operational Instruction, and return to Step 8 in this Operational Instruction.

Note:   Use parameters SETNAME=GSM1APTC, NAME=MCASSACT and VALUE=1.

Job Completed
8. Make a report.

Note:   See Operational Instruction Report of Finished Work.

9. The job is completed.

3   Additional Information
3.1   EOS Analysis and Announcement Data for MCA
For the purposes of the MCA function, exchange data relevant to End of Selection (EOS) analysis for this function (see
Application Information for block MTBSS) and announcement may need to be further defined using the relevant
operational documentation.

3.2   IMSI Number Series Analysis Data for MCA

Subscribers in Home Public Land Mobile Network (HPLMN) having a subscription to the MCA service through Home
Location Register (HLR) are implicitly associated with the default SMS-SC address for short message sending due to MCA.
All other subscribers may have a subscription to the service either through HLR or through a dedicated IMSI number series
analysis result (SCADPR). In both the last two cases, the SMS-SC address to be used for short message sending is
determined by appropriate setting of IMSI series analysis result SCADPR, pointing to an explicit SMS-SC address profile.
See Application Information of Application Module MAGAM.

4   Glossary
EOS End of Selection
HLR Home Location Register
HPLMN Home Public Land Mobile Network
IMSI International Mobile Subscriber Identity
MCA Missed Call Alert
MSC Mobile Services Switching Centre
MSISDN Mobile Station Integrated Services Digital Network
SC Service Centre
SMS Short Message Service
10.177.101.132/alexserv?id=8827 3/4
30/8/2019 Mobile Telephony, Missed Call Alert, Activate

VLR Visitor Location Register

5   References
5.1   Operational Instructions
AXE Parameter Value, Change
Mobile Telephony, Missed Call Alert, Profile Data, Define
Report of Finished Work

5.2   Application Information

MAGAM
MTBSS

Legal | © Copyright Ericsson GmbH 2007

10.177.101.132/alexserv?id=8827 4/4