18.

VECTORS

VECTOR AND SCALAR QUANTITIES

Parallel and equal vectors
To understand vectors, we must first be able to
distinguish between the two measurable quantities, a Vectors that have the same direction are parallel. For
scalar and a vector. example, the vector, p, 4 km North East is parallel to
the vector, q, 8 km North East. If, however, another
A scalar quantity is a measurable quantity that vector, r, is 2 km south-west, (which is opposite in
possesses only magnitude. The scalar has no direction to North East) we can represent these
direction. Some examples of these are distance,
vectors by an arrow drawn in the opposite direction,
speed, area, volume, length, time, age and mass.

m
as shown below.
A vector quantity is a measurable quantity that 𝒑 = 4 𝑘𝑚 𝑁𝐸 𝒒 = 8 𝑘𝑚 𝑁𝐸 𝒓 = 2 𝑘𝑚 𝑆𝑊
possesses both magnitude and direction. Some

co
examples of vectors are displacement, velocity,
acceleration and weight. We use line segments to
represent vectors and the direction of the arrow

.
shows the direction of the vector. The difference

hs
between a scalar and a vector is illustrated below.

at Note that all three vectors are parallel, but p and q

m
are in the same direction while r is in the direction
opposite to p.
s
as

The vectors p and q are said to be directly parallel,

while the vectors p and r are said to be oppositely
sp

parallel. Although the vectors p and q are both in the

same direction, their magnitudes are different. In our
example, the magnitude of p is 4, the magnitude of q
.fa

is 8 and the magnitude of r is 2. Note that either one

The vector #####⃗
𝑂𝑃 is distinct from the scalar OP, is always a scalar multiple of the other.
whose line segment is not arrowed. The direction
of the arrow shows the direction of the vector. The vectors, p and q are directly parallel, so
w

𝒒 = 2𝒑
1
w

𝒑= 𝒒
2
Vector Notation
w

The vectors, p and q are directly parallel, so

A vector is written or named as a line segment using 𝒑 = −2𝒓
the two end points, with an arrow at the top. This 1
𝒓=− 𝒑
arrow indicates the direction of the vector, The vector 2
OP is written as #####⃗
𝑂𝑃 . In this case, the direction is
from the point O to the point P. The point O is the The vectors, r and q are oppositely parallel, they
tail of the vector and the point P is the head of the have the same direction.
vector. Also, a vector may be symbolised by a letter, 𝒒 = −4𝒓
written in bold print, such as a or an underlined letter 1
𝒓=− 𝒒
such as a to indicate that a quantity is a vector. So, 4
we may write 𝑂𝑃#####⃗ = 𝒂.

174

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

If two vectors are equal, they must have both the A practical example of parallel vectors is illustrated
same magnitude and same direction. In other words, below. The swimmer is swimming in the same
equal vectors are the same vectors shifted to some direction as the current (parallel vectors), hence the
other position on the plane. resultant is the sum of both velocities.

Swimmer 3ms-1

Current 1ms-1
Vectors a and b have the same magnitude and
Resultant 4ms-1
also the same direction. Therefore 𝒂 = 𝒃.

m
If two vectors are equal in magnitude but are opposite
If the direction of the vectors is opposite to each
in direction, one is the inverse of the other.
other, then the resultant is in the direction of the

co
greater vector and with a magnitude obtained by
subtracting the smaller from the larger.

.
a

hs
b a
b
Vectors a and b have the same magnitude but are
opposite in direction. The vector b is the inverse at a
m
(negative) of the vector a or a is the inverse of b.
Also, 𝒂 = −𝒃
𝒂−𝒃 𝒃
s

To add vectors in the opposite direction, we

as

Adding Parallel vectors subtract magnitudes.

Vectors of the same kind and in the same direction
sp

may be added or combined into a single vector called If the swimmer was swimming against the current
the resultant. then the resultant would be the difference between
the vectors.
.fa

In this case, the resultant vector will be in the same

direction as the separate or individual vectors and
will have a magnitude obtained by adding the
w

magnitudes of these individual vectors. Swimmer 3ms-1

Adding vectors in the same direction
w

Current 1ms-1
a
w

b Resultant 2ms-1

a b

Adding non-parallel vectors

𝒂+𝒃
The two vectors a and b are in the same direction. Vectors can be drawn from any point on a plane.
The resultant will be in the same direction as that Sometimes we are asked to add two vectors that are
of a and of b. The magnitude of the resultant is not parallel and start at the same point, like this:
the magnitude of a + the magnitude of b.

175

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

In such a case, in order to add b to a, we must apply
the tail to head principle and shift b to the point
where a ends. In so doing, we form a parallelogram
with b and a as adjacent sides, as shown below.
By the parallelogram law:

m
#####⃗
𝐴𝐵 + #####⃗
𝐴𝐷 = #####⃗
𝐴𝐶

co
#####⃗ = 𝐴𝐷
But, 𝐵𝐶 #####⃗ (opposite sides of a parallelogram)

Hence, we may replace #####⃗

𝐴𝐷 by #####⃗
𝐵𝐶 to get:

.
hs
#####⃗ + 𝐵𝐶
𝐴𝐵 #####⃗ = 𝐴𝐶
#####⃗

Notice we are now involving the three sides of a

We are now in a position to determine the resultant
vector. This is the vector that connects the starting at triangle ABC. This is called the triangle law for
adding vectors.
m
point to the end point. If the vectors a and b are
neither in the same direction nor in opposite Triangle law of vector addition
directions, then we may introduce the parallelogram If two vectors are represented in magnitude and
s
law of vector addition to obtain their resultant. direction by two sides of a triangle, taken in order,
as

then the resultant is represented in magnitude and

Parallelogram law of vector addition direction by the third side of the triangle, taken in
If two vectors are represented in magnitude and the direction from the starting point.
sp

direction by the adjacent sides of a parallelogram,

then the resultant is represented in magnitude and
direction by the diagonal of the parallelogram
taken from the starting point.
.fa
w
w
w

Hence, we do not always need the parallelogram law

to add two vectors, we can simply use the principle of
When adding two vectors that start from the same adding vectors tail-to-head to find the resultant
point we use the parallelogram law, shifting one of vector. If vectors are so positioned that the resultant
the vectors to the end point of the other. In so doing, can be obtained by completing a triangle, then we
we formed a triangle whose third side is the resultant apply the triangle law. Observe the following
of the two vectors. This is illustrated in the diagram applications of this law.
below.

176

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

 Vectors on the Cartesian Plane

So far, we have represented vectors using line

segments with arrows to show their direction. When
vectors are represented on the Cartesian plane, we
use another convention. We have used this
convention in the study of motion geometry, where
#####⃗
𝐴𝐶 + #####⃗
𝐶𝐵 = #####⃗
𝐴𝐵 column matrices were used to describe a translation.
#####⃗ + 𝐵𝐴
𝐶𝐵 #####⃗ = 𝐶𝐴
#####⃗
Column vector notation

In this notation, a 2×1 matrix is used to represent the

The triangle law of vector addition follows a pattern vector. The elements of the matrix or components of

m
when we observe any statement of its application. the vector are their displacements along the x and y-
This pattern allows us to predict the resultant without axes.
even drawing the triangle.

co
For a given triangle, ABC:

.
hs
#####⃗ + 𝐵𝐶
𝐴𝐵 #####⃗ = 𝐴𝐶
#####⃗ The resultant is
always the
connection
These two
letters must be
between the
starting point and
at
m
the end point.
the same
because both
s
vectors share
The vectors, a and b can be described using
this vertex.
as

column matrices, where

a = æ 1 ö and b = æ 2 ö . Notice in these two
ç 3÷ ç -3 ÷
è ø è ø
sp

examples neither vector was drawn from O.

Example 1
Write down the resultant in each case:

.fa

#####⃗ + #####⃗
(i) 𝑃𝑄 𝑄𝑅 æaö
In general, the vector çb÷ represents a
#####⃗ + 𝑃𝑄
(ii) 𝑅𝑃 #####⃗
è ø
#####⃗ + 𝑅𝑃
(iii) 𝑄𝑅 #####⃗
w

displacement of a units along the x-axis and a

displacement of b units along the y-axis.
w

Solution
w

By observation of the pattern Position vectors

#####⃗ (Q is the common point, P is the starting

(i) 𝑃𝑅 All vectors are measured from a fixed point. Vectors
point and R is the end point) on a Cartesian Plane can start at any point on the
plane (as seen in the above example). Such vectors
(ii) #####⃗
𝑅𝑄 (P is the common point, R is the starting are known as free vectors. If, however, we start a
point and Q is the end point) vector at the origin, then such a vector is called a
position vector.
(iii) #####⃗
𝑄𝑃 (R is the common point, Q is the starting
point and P is the end point) In this sense, position vectors are not free vectors
because they are tied to the origin. Their starting
point is always the origin.

177

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

 On the Cartesian plane, we can define two special
unit vectors, i and j, shown in the diagram below.

The unit vector i is one unit in length, parallel to

the x-axis. The unit vector, j is one unit in length,

m
The vectors p, q and r are position vectors,
where: parallel to the y-axis.
æ1ö æ 0ö
æ 2ö æ 6ö æ 4ö

co
i=ç ÷ j =ç ÷
p=ç ÷ q=ç ÷ r=ç ÷ è 0ø è1ø
è 4ø è 2ø è -2 ø

.
We can now define any position vector in terms of

hs
the unit vectors, i and j.
In general, if P (a, b), then the position vector,
#####⃗ = C𝑎F.
𝑂𝑃 If P is the point
𝑏
The inverse of #####⃗
𝑂𝑃 is #####⃗
𝑃𝑂 = −𝑂𝑃#####⃗ = C−𝑎F
−𝑏 at (3, 4) then the vector
!!!"
m
OP can be written
!!!"
Example 2 as OP = 3i + 4j .
The points A, B and C have position vectors
s
This is the unit vector
#####⃗ 6 #####⃗ = C3F and 𝑂𝐶
#####⃗ = C 12 F
𝑂𝐴 = C F 𝑂𝐵 notation.
as

2 4 −2
𝑥
Express in the form C𝑦 F the vector
We now have an alternative notation to represent a
sp

(i) #####⃗
𝐵𝐴 (ii) #####⃗
𝐵𝐶 vector. This notation is convenient as it facilitates
problems involving algebraic manipulations of
vectors.
.fa

Solution In general, we can represent vectors using either the

#####⃗ = 𝐵𝑂
(i) 𝐵𝐴 #####⃗ + 𝑂𝐴
#####⃗ =−𝑂𝐵
#########⃗ + 𝑂𝐴
#####⃗ unit vector notation or column matrix notation,
w

æaö
ai + bj = ç ÷
3 6 −3 6 3 èbø
= −C F + C F = C F + C F = C F
w

4 2 −4 2 −2

(ii) #####⃗
𝐵𝐶 = #####⃗
𝐵𝑂 + #####⃗ #########⃗ + #####⃗
𝑂𝐶 =−𝑂𝐵 𝑂𝐶
w

3 12 −3 12 9 The modulus of a vector

= −C F + C F = C F + C F = C F
4 −2 −4 −2 −6
The modulus of a vector refers to its length. If we
know the coordinates of a point, P, then we can find
the length of the position vector, 𝑂𝑃 #####⃗ using
Unit vectors Pythagoras’ Theorem.

A unit vector is a vector whose length is one unit. A For example, to determine the length of the position
unit vector can have any direction, but its magnitude #####⃗, where P (3, 4). We observe that OP is the
vector 𝑂𝑃
is always one. hypotenuse of a right-angled triangle whose
horizontal and vertical sides are 3 and 4 units
respectively.

178

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

 Example 3

By Pythagoras’ The vectors a and b are: a = 6i + j and b = 2i + 7j

Theorem, ,
!!!"
OP = ( 3) + ( 4 ) = 5
2 2
express (i) a + b (ii) a – b in the form ai + bj

Solution
(i) (ii)
a + b = ( 6 + 2 ) i + (1+ 7 ) j a − b = a + −b
a − b = (6i + j) + (−2i − 7j)
#####⃗ = 𝑎𝒊 + 𝑏𝒋 = C𝑎F then the
In general, if 𝑂𝑃 a + b = 8i + 8j
𝑏 ( ) (
a − b = 6 − 2 i + 1− 7 j)

m
magnitude or the modulus of p, is
a − b = 4i − 6j
#####⃗N = O𝑎P + 𝑏 P
N𝑂𝑃

co
Unit vectors that are not parallel to the x and

.
y-axes

hs
The Direction of a Vector
A unit vector always has a magnitude of one unit, but
The direction of a vector is the angle it makes with it can have any direction. We can visualize a unit
#####⃗ = C3F as a vector
the positive direction of the x-axis. This is easily
obtained by simple trigonometry.
at vector parallel to the vector, 𝑂𝑃
4
whose magnitude is one and whose direction is the
m
In the above example, the direction of 𝑂𝑃 #####⃗ is same as OP.
determined by calculating 𝜃 using the tangent ratio. P
s
R
Since tan 𝜃 = S , the direction of the vector #####⃗
𝑂𝑃 is
as

calculated by obtaining the value of 𝜃 from: This is a unit vector in

4 #####⃗.
the direction of 𝑂𝑃
𝜃 = 𝑡𝑎𝑛WX Y Z = 53.1\
sp

3
𝑎
In general, if #####⃗
𝑂𝑃 = 𝑎𝒊 + 𝑏𝒋 = C F then the
𝑏
.fa

direction of #####⃗
𝑂𝑃 is angle, 𝜃 it makes with the
positive direction of the x-axis, where
𝑏 O
𝜃 = 𝑡𝑎𝑛WX Y Z
w

𝑎
When we divide a vector by its magnitude we obtain
w

a vector which has the same direction but a

magnitude of one.
w

Adding of vectors - unit vector notation 3

The magnitude of the vector C F is √3P + 4P =5,
4
When we are adding or subtracting vectors, using the #####⃗ has a length of 5 units.
hence, 𝑂𝑃
unit vector notation, we add the coefficients of i and j 3
The unit vector in the direction of C F is one-fifth
as illustrated below. 4
S
3 X 3
If a = a1i + b1j and the vector C F or C F = _^R`. Hence, there are 5
4 ^ 4
^
b = a2i + b2 j vectors, each of length one unit along OP to make up
Then a + b = ( a1 + a2 ) i + (b1 + b2 ) j a magnitude of 5.
So too, a - b = ( a1 - a2 ) i + (b1 - b2 ) j

179

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

 ⎛ a ⎞ Solution
In general, a unit vector in the direction of ⎜ ⎟ is −2 6 4
⎝ b ⎠ (a) (i) #######⃗
𝑀𝑁 = ######⃗
𝑀𝑂 + ######⃗
𝑂𝑁 = C F + C F = C F
−4 −2 −6
1 ⎛ a ⎞ 2 2 4
⎜ ⎟ (a)(ii) #######⃗
𝐾𝑀 = ######⃗
𝐾𝑂 + ######⃗
𝑂𝑀 = C F + C F = C F
a 2 + b2 ⎝ b ⎠ −3 4 1

(b) #####⃗
𝑂𝑇 = 𝑂𝑀######⃗ + 𝑀𝑇
######⃗
Example 4 2 X 4 2 2 4
= C F + P C F = C F + C F = C F
4 −6 4 −3 1
######⃗ , where
Find the unit vector in the direction of 𝑂𝑀 Hence, the coordinates of T are ( 4, 1) .
######⃗
𝑂𝑀= 5i+12j.
(c) In the quadrilateral OKMT, #####⃗
𝑂𝑇 = 𝐾𝑀#######⃗ = C4F.
1
Hence, the quadrilateral is a parallelogram because

m
Solution it has one pair of opposite sides which are both
#######⃗N= √25 + 144 =√169 =13
N𝑶𝑴 parallel and equal.

co
ddddd is
The unit vector in the direction of 𝑂𝑀
X Example 5
XS
(5𝒊 + 12𝒋)

.
hs
In triangle ABC, R and S are the midpoints of AB
Proofs in vectors and BD respectively.
(a) Sketch the diagram to show the points R and S.
!!!" !!!"
Often when we study vectors, we are asked to prove
relationships between two vectors. For example, we
may be asked to prove that two vectors are parallel, at
(b) Given that AB = 4x and BC = 6 y , express in
!!!"
m
terms of x and y an expression for (i) AC (ii)
or collinear. !!!"
RS
s
To prove two vectors are parallel !!!" 1 !!!"
(c) Hence, show that RS = AC .
as

2
If we wish to prove that vectors are parallel, we must
simply show that either one of them is a scalar
multiple of the other. The converse is also true, that
sp

is, if a vector can be expressed as a scalar multiple of Solution

another, then they are parallel. (a)
.fa

For example, if we are given two vectors #######⃗ 𝑉𝑊 and

####⃗ such that, 𝑉𝑊
𝑆𝑇 #######⃗ = 𝛼 𝑆𝑇
####⃗ , where 𝛼 is a scalar. We
can conclude that #######⃗𝑉𝑊 and ####⃗
𝑆𝑇 are parallel vectors.
w

Example 4
w

The position vectors of the points L, M and K !!!" !!!" !!!"

relative to the origin are: (b) (i) AC = AB + BC = 4 x + 6 y
w

!!!!" ⎛ 2 ⎞ !!!" ⎛ 6 ⎞ !!!" ⎛ −2 ⎞

OM = ⎜ ⎟ ON = ⎜ ⎟ OK = ⎜ ⎟
⎝ 4 ⎠ ⎝ −2 ⎠ ⎝ 3 ⎠ !!!" 1 !!!" 1 !!!"
(ii) RS = AB + BC
(a) Express as column vectors: 2 2
!!!!" !!!!"
1 1
(i) MN (ii) KM = ( 4x ) + ( 6 y ) = 2x + 3y
(b) The point T is such that MT = NT . Use a 2 2
!!!" !!!"
vector method to determine the position vector of (c) AC = 2 ( 2x + 3y ) = 2RS
T. Hence, state the coordinates of T.
!!!" 1 !!!"
(c) Hence, prove that OKMT is a parallelogram. RS = AC
2

180

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com

To prove three points are collinear Solution -Example 5, part (c)
!!!" !!!!" !!!" !!!!"
Points are collinear if they lie on the same straight PN = 4PM , so PN is a scalar multiple of PM
line. To prove A, B and C are collinear, we may !!!" !!!!"
prove that two of the line segments are parallel, by Hence, PN is parallel to PM . P is a common point,
proving that either is a scalar multiple of the other. If so M must lie on PN and P, M and N lie on the same
there is a common point together with the parallel straight line, that is, they are collinear.
property, then the three points must be collinear.

Example 5
!!!" !!!"
OA = a, OB = b , P is on OA such that and M is on
BA such that BM = MA and OB is produced to N
such that OB = BN

m
(a) Draw a diagram showing the points P and M.
(b) Express 𝐴𝐵dddd, 𝑃𝐴
dddd and 𝑃𝑀
ddddd in terms of a and b.

co
(c) Prove P, M and N are collinear.

.
Solution

hs
(a) Example 7
dddd
The diagram below shows two position vectors 𝑂𝑅
dddd such that R(6, 2) and S(−4, 3).
and 𝑂𝑆

at
s m
as

!!!" !!!" !!!!"

(b) AB , PA and PM in terms of a and b.
sp

!!!" !!!" !!!" !!!!" !!!" !!!!" æ xö

AB = AO + OB PM = PA + AM Write as a column vector in the form ç y÷:
è ø
.fa

= − (a) + b 1 !!!!"
= a + AM (i) dddd
𝑂𝑅 (ii) dddd
𝑂𝑆 (iii) dddd
𝑆𝑅
= −a + b 3
!!!!" 1 !!!"
w

!!!" !!!" AM = AB
2 Solution
If OP = 2PA , then !!!!" 1 1 6 𝑥
PM = a + ( −a + b )
w

!!!" 2 !!!" 2 (i) R(6, 2), dddd

𝑂𝑅 = C F is of the form C𝑦 F, where
OP = OA = a 3 2 2
3 3 𝑥 = 6 and 𝑦 = 2.
w

!!!" 1 !!!" 1 1 1 1
= a− a+ b
PA = OA = a 3 2 2 −4 𝑥
3 3 (ii) S(−4, 3), dddd
𝑂𝑆 = C F is of the form C𝑦 F,
1 1 3
= − a+ b where 𝑥 = −4 and 𝑦 = 3.
6 2
c) Required !!!"to Prove: P, M and N are collinear.
dddd = 𝑆𝑂
(iii) 𝑆𝑅 dddd = C 4 F + C6F = C 10 F
dddd +𝑂𝑅
ON = 2b −3 2 −1
!!!" !!!" !!!" 𝑥
2 is of the form C𝑦 F, where 𝑥 = 10 and 𝑦 = −1.
PN = PO + ON = − a + 2b
3
⎛ 1 1 ⎞ !!!!"
= 4 ⎜ − a + b ⎟ = 4PM
⎝ 6 2 ⎠

181

Copyright © 2019. Some Rights Reserved. www.faspassmaths.com