Scribd
Upload
45 views

Exercise 2 and 3 Stagefinal

This document discusses solving practical problems related to wireless communication using a provided image as a reference. It presents two problems: 1) calculating signal attenuation over a given distance based on medium properties, and 2) determining reflected and transmitted power at a building based on impedances. Calculations are shown for both problems, citing relevant references.

Uploaded by

Fernando Sierra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
45 views

Exercise 2 and 3 Stagefinal

This document discusses solving practical problems related to wireless communication using a provided image as a reference. It presents two problems: 1) calculating signal attenuation over a given distance based on medium properties, and 2) determining reflected and transmitted power at a building based on impedances. Calculations are shown for both problems, citing relevant references.

Uploaded by

Fernando Sierra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Activities to develop

In this activity, the group will have to solve some practical problems using as a reference the
following image.

Retrieved from: http://www.scientechworld.com/education-software-training-and-skill-


development/wireless-communication/understanding-wireless-sensor-network

Taking into account the image, solve the following problems:

2 If the medium has the following electromagnetic characteristics: 𝜎 = 10−3 𝑠𝑚/𝑚,


𝜖𝑟 = 1 y 𝜇𝑟 = 1. Find the losses per length unit, take into account the given frequency
for the signal, how long must travel the signal to have more than 3dB of attenuation?
𝜎
tan 𝛿 =
𝜔𝜖
10−3
tan 𝛿 =
1
2𝜋 ∗ 6 ∗ 106 ∗ (36𝜋 ∗ 10−9 ) ∗ (1)

tan 𝛿 = 0.3
𝜎
𝜖𝑟 =
𝜔
10−3
𝜖𝑟 =
2𝜋 ∗ 6 ∗ 106
𝜖𝑟 = 2.6525 ∗ 10−12
𝜖𝑟
𝜖=
tan 𝛿
2.6525 ∗ 10−12
𝜖=
0.3
𝜖 = 8.8419 ∗ 10−12

Propagation constant
y = 𝑗𝜔√𝜇0 𝜇𝑟 𝜖𝑐

y = 𝑗 ∗ 2𝜋 ∗ 6 ∗ 106 √(4𝜋 ∗ 10−7 ) ∗ (1) ∗ (8.8416 ∗ 10−12 − 𝑗2.6525 ∗ 10−12 )

y = 𝑗 ∗ 2𝜋 ∗ 6 ∗ 106 √1.111 ∗ 10−17 − 𝑗3.3332 ∗ 10−18 )

y = 𝑗 ∗ 2𝜋 ∗ 6 ∗ 106 ∗ (3.3696 ∗ 10−09 − 𝑗4.9458 ∗ 10−10 )

y = 0.0188 + 𝑗0.12703

Dimmer constant
𝛼 = 0.0188 Nep/m

% perdidas = 1 − e−2 𝛼 𝑥

% perdidas = 3.70%

The attenuation is calculated in descibeles

𝛼𝑑𝑏/𝑚 = −8.68 𝛼
𝛼𝑑𝑏/𝑚 = −0.164

To have an attenuation greater than 3db the signal must travel a distance of

𝛼𝑑𝑏/𝑚 X = −3db
−3𝑑𝑏
X=
𝛼𝑑𝑏/𝑚

−3𝑑𝑏
X=
−0.164

X = 18.34𝑚
σ= 0,0001 Sm/m y= = 0,126 j

Ur= 1
U= 1,25664E-06 β=
f= 6 MHz
ω= 37699111,84 β= 0,126 rad/m

n=

n= 376,99 Ω

α=

α= 0,0188 Np/m

Perdidas por unidad de longitud x = 1m


x= 1,00 m
% Perdidas =

% Perdidas = 3,70 %

Se càlcula la atenuaciòn en descibeles αdB/m =


αdB/m = -0,164

Para tener una atenuacion superior a 3 db, la señal debe recorrer una distacia de

αdB/m X= -3 db

-3 db
X=
αdB/m

-3,00
X=
-0,164

X= 18,34 m
3 In the buildings have an intrinsic impedance of 𝜂2 = 300Ω and the signal has a power
of 100𝑚𝑊/𝑚2 . Fin the reflected and transmitted power to the buildings.

Air impedance 𝑁1 = 120𝜋


Intrinsic impedance 𝑁2 = 300Ω

𝑁 −𝑁 300−120𝜋
Reflection coefficient r = 𝑁2 +𝑁1 = = −0.114 < 1800
2 1 300+120𝜋

Reflectance R = |𝑟|2 = −0.1142 = 0.0129 = 1.29%

Transmittance T = 1 − 𝑅 = 1 − 1.29% = 98.71%

Reflected power |𝑃1 − | = 1.29% ∗ 100𝑚𝑊/𝑚2 = 1.29𝑚𝑊/𝑚2

Transmitted power |𝑃1 + | = 98.71% ∗ 100𝑚𝑊/𝑚2 = 98.71𝑚𝑊/𝑚2

Γ= Coeficiente de reflexiòn
N1 = 120 p Impedancia del aire
N2 = 300 Impedancia intrinsica
P= 100,00 mW/m2 Potencia
R= Reflactancia
T= Transmitancia
| P1- | = Potencia reflejada
| P1+ | = Potencia transmitida

N2 - N1 -76,99
Γ= =
N2 + N1 676,99

Γ= -0,114 < 180,00 °

R= | Γ |2 = 0,0129
R= 1,29% %

T= 1- R = 98,71%

| P1- | = 1,29% * 100,00 mW/m2 = 1,29 mW/m2

| P1+ | = 98,71% * 100,00 mW/m2 = 98,71 mW/m2


REFERENCES

 Gutiérrez, W. (2017). Loss Tangent [Video]. Retrieved from


http://hdl.handle.net/10596/13139
 Quesada-Pérez, M., & Maroto-Centeno, J. A. (2014). From Maxwell's Equations to
Free and Guided Electromagnetic Waves: An Introduction for First-year
Undergraduates. New York: Nova Science Publishers, Inc, 49-80 Retrieved from
http://bibliotecavirtual.unad.edu.co:2051/login.aspx?direct=true&db=nlebk&AN=7
46851&lang=es&site=eds-live&ebv=EB&ppid=pp_49
 Chen, W. (2005). The Electrical Engineering Handbook. Boston: Academic Press,
519-524. Retrieved from
http://bibliotecavirtual.unad.edu.co:2048/login?url=http://search.ebscohost.com/logi
n.aspx?direct=true&db=nlebk&AN=117152&lang=es&site=ehost-
live&ebv=EB&ppid=pp_519
 Chen, W. (2005). The Electrical Engineering Handbook. Boston: Academic Press,
519-524. Retrieved from
http://bibliotecavirtual.unad.edu.co:2048/login?url=http://search.ebscohost.com/logi
n.aspx?direct=true&db=nlebk&AN=117152&lang=es&site=ehost-
live&ebv=EB&ppid=pp_519
 Chen, W. (2005). The Electrical Engineering Handbook. Boston: Academic Press,
525-551. Retrieved from
http://bibliotecavirtual.unad.edu.co:2048/login?url=http://search.ebscohost.com/logi
n.aspx?direct=true&db=nlebk&AN=117152&lang=es&site=ehost-
live&ebv=EB&ppid=pp_525
 Joines, W. T., Bernhard, J. T., & Palmer, W. D. (2012). Microwave Transmission
Line Circuits. Boston: Artech House, 23-68. Retrieved from
http://bibliotecavirtual.unad.edu.co:2051/login.aspx?direct=true&db=nlebk&AN=7
53581&lang=es&site=eds-live&ebv=EB&ppid=pp_23

You might also like