PC1404

User Manual

T
AF
R
D

IMPORTANT: This manual contains information on limitations regarding product use and
function and information on the limitations as to liability of the manufacturer. The entire manual
should be carefully read.
 Table of Contents
About Your Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fire Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
System Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Keypad Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
LCD Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PK5500 Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Arming and Disarming the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Arming the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Alternate Arming Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Away Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Stay Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Night Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arming Without Entry Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto Arming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disarming the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
T
If An Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AF

Fire Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Intrusion Alarm 8
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
R

Programming Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Alarm Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
D

Door Chime (Entry/Exit Beeps). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Access Code Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User Code Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Bell Squawk Attribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Bypassing Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Viewing Trouble Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the System Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Keypad Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Downloading Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fire Alarm Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
User Function Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing Brightness/Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Changing the Buzzer Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Viewing the Event Buffer from a PK5500 Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sensor Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

i
Testing Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Alarm Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Full System Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Walk Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Allowing Computer Access To Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Household Fire Safety Audit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Fire Escape Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Guidelines for Locating Smoke Detectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

T
AF
R
D

ii
Important Safety Instructions for User
CAUTION: When using equipment connected to the TELEPHONE NETWORK, there are basic
safety instructions that should always be followed. Refer to the SAFETY INSTRUCTIONS pro-
vided with this product; save them for future reference. The INSTALLER will instruct you regard-
ing the safety precautions that shall be considered during the use of this equipment.
In order to reduce the risk of fire, electric shock and/or injury to the persons, several basic safety
precautions shall be considered as follows:

• NEVER SPILL LIQUID OF ANY KIND ON THE EQUIPMENT.

• NEVER OPEN THE DEVICE YOURSELF.
• DO NOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF. OPENING OR REMOVING COVERS MAY
EXPOSE YOU TO DANGEROUS VOLTAGES OR OTHER RISKS; REFER SERVICING TO SERVICE PER-
SONS ONLY (Service Person is defined as a person having appropriate technical training and experi-
ence necessary to be aware of hazards to which that person may be exposed in performing a task
and of measures to minimize the risks to that person or other persons).
• AVOID TOUCHING THE EQUIPMENT AND ITS CONNECTED CABLES DURING AN ELECTRICAL
STORM; THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.
• DO NOT USE THE ALARM CONTROLLER TO REPORT A GAS LEAK IF IT IS IN THE VICINITY OF THE
LEAK.

REGULAR MAINTENANCE AND TROUBLESHOOTING

You can keep your Alarm Controller in optimum conditions by following all the instructions that
are included within this leaflet.

CLEANING:
T
• The enclosure should be cleaned by wiping with a damp cloth only.
AF

• DO NOT use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter through
holes in the enclosure (case) of the Alarm Controller and cause damage.
• DO NOT use any water or any other liquid.
• DO NOT wipe the front cover with alcohol. It may damage it.
R
D

TROUBLESHOOTING
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this hap-
pens, your Alarm Controller usually identifies the problem and displays an error message. Refer
to the provided list when you see an error message on the display. If additional help is needed,
please contact your distributor for service.
All the used batteries shall be disposed of as per the local rules and/or regulations.

iii
About Your Security System
Your DSC Security System has been designed to provide you with the greatest possible flexibility and
convenience. Read this manual carefully and have your installer instruct you on your system's
operation and on which features have been implemented in your system. All users of this system
should be equally instructed in its use. Fill out the “System Information” page with all of your zone
information and access codes and store this manual in a safe place for future reference.
Carbon Monoxide Detection (must be enabled by your Installer)
This equipment is capable of monitoring carbonmonoxide detectors and providing a warning if
carbon monoxide is detected. Please read the Family Escape Planning guidelines in this manual and
instructions that are available with the carbon monoxide detector.
Fire Detection
This equipment is capable of monitoring fire detection devices such as smoke detectors and
providing a warning if a fire condition is detected. Good fire detection depends on having adequate
number of detectors placed in appropriate locations. This equipment should be installed in
accordance with NFPA 72 (N.F.P.A., Batterymarch Park, Quincey MA 02269). Carefully review the
Family Escape Planning guidelines in this manual.
NOTE: Your installer must enable the fire detection portion of this equipment before it becomes
functional.
Testing
To ensure that your system continues to function as intended, you must test your system weekly.
Please refer to the “Testing your System” section in this manual. If your system does not function
properly, call your installing company for service.
Monitoring
This system is capable of transmitting alarms, troubles & emergency information to a central station.
T
If you initiate an alarm by mistake, immediately call the central station to prevent an unnecessary
response.
AF

NOTE: The monitoring function must be enabled by the installer before it becomes functional.
Maintenance
With normal use, the system requires minimum maintenance. Note the following points:
R

• Do not wash the security equipment with a wet cloth. Light dusting with a slightly moistened cloth
should remove normal accumulations of dust.
D

• Use the system test described in “Testing Your System” to check the battery condition. We recom-
mend, however, that the standby batteries be replaced every 3-5 years.
• For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave motion
detectors or glassbreak detectors, consult the manufacturer’s literature for testing and maintenance
instructions.
General System Operation
Your security system is made up of a DSC control panel, one or more keypads and various sensors
and detectors. The control panel will be mounted out of the way in a utility closet or in a basement.
The metal cabinet contains the system electronics, fuses and standby battery.
NOTE: Do NOT open the enclosure of this equipment. Only the installer or service professional
should have access to the control panel.
All the keypads have an audible indicator and command entry keys. The LED keypads have a group
of zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD).
The keypad is used to send commands to the system and to display the current system status. The
keypad(s) will be mounted in a convenient location inside the protected premises close to the entry/
exit door(s).
The security system has several zones of area protection and each of these zones will be connected
to one or more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in
alarm will be indicated by the corresponding zone lights flashing on an LED keypad or by written
messages on the LCD keypad.

1
 System Keypads
LED5511 LCD5511

PC1555RKZ Display

System
Lights

Number
Pad

T
AF

PC1555RKZ
Status PK5508/PK5516
Lights
R

Number
Pad
D

Zone
Lights

PK5500/PK5501
Emergency Keys

PC1404RKZ

1 2 3 Stay
Away
4 5 6
Chime
7 8 9 Reset
Quick
* 0 # Exit

2
Keypad Display Symbols
PK5501 PK5508/5516
1 2 3 4
5 9 6

15
18
14
12 7 11 8 10
13
LCD5511
LED5511

15
6

10
PC1404RKZ
17 18 14 13 4
T
1 Clock Digits 1, 2 – These two digits indicate the hour digits when the local clock is active, and
AF

identify the zone when the OPEN or ALARM icons are active. These two digits scroll one zone
per second from the lowest zone number to the highest when scrolling through zones.
2 : (Colon) – This icon is the hours/minutes divider and will flash once a second when the local
R

clock is active.
3 Clock Digits 3, 4 – These are the minute digits when the local clock is active.
D

4 1 to 8 – These numbers identify troubles when [][2] is pressed.

5 Memory – Indicates that there are alarms in memory.
6 Bypass – Indicates that there are zones automatically or manually bypassed.
7 Program – Indicates that the system is in Installer’s Programming or the keypad is busy.
8 Away – Indicates that the panel is armed in the Away Mode.
9 Fire – Indicates that there are fire alarms in memory.
10 Stay – Indicates that the panel is armed in the Stay Mode.
11 Chime – This icon turns on when the Chime function key is pressed to enable Door Chime on
the system. It will turn off when the chime function key is pressed again to disable Door Chime.
12 OPEN – This icon is used with clock digits 1 and 2 to indicate violated zones (not alarm) on the
system. When zones are opened, the OPEN icon will turn on, and 7 segment displays 1 and 2
will scroll through the violated zones.
13 AC – Indicates that AC is present at the main panel.
14 System Trouble – Indicates that a system trouble is active.
15 Night – Indicates that the panel is armed in the Night Mode.
16 System - Indicates one or more of the following:
Memory – Indicates that there are alarms in memory.
Bypass – Indicates that there are zones automatically or manually bypassed.
System Trouble – This icon is displayed when a system trouble is active.
17 Ready Light (green) – If the Ready light is on, the system is ready for arming.
18 Armed Light (red) – If the Armed light is on, the system has been armed successfully.

3
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and – if included –
your central station of an emergency situation. Security systems are generally very reliable, but they
may not work under all conditions, and they are not a substitute for prudent security practices or life
and property insurance. Your security system should be installed and serviced by qualified security
professionals who should instruct you on the level of protection that has been provided and on sys-
tem operations.
LCD Keypads
The Liquid Crystal Display (LCD) on the PK5500 displays prompts and system information on two
16- character lines.
Where “< >” appears, more information can be accessed by using the arrow (< >) keys. Press [<] to
see the previous function or item of information. Press [>] to advance the display to next function or
item of information.
Press the keys on the number pad as prompted by the LCD display to view alarms or troubles, to arm
and disarm the system and to bypass zones.
To exit a function and return to the Ready state, press [#].
To select a function, press [].
PK5500 Language Selection
Your keypad may have the capability to display messages in different languages.
1. Press and hold both keys simultaneously.
2. Using the keys, scroll through the available languages.
3. Press to select your desired language.
Arming and Disarming the System
T
Arming the System
Arming from an LED Keypad:
AF

If the Ready light is ON, the system is ready for arming. If the Ready light is OFF, check to see that all
doors and windows are closed and that motion is stopped in areas covered by motion detectors. The
system cannot be armed unless the Ready light is ON, indicating that all zones are closed and the
R

system is in the Ready state.

Enter your access code. As each digit is entered, the keypad sounder will beep. If the access code
D

was entered incorrectly, the keypad buzzer will sound steadily for one second. If this occurs, press
the [#] key and re-enter your access code. If the correct access code is entered, the keypad sounder
will beep quickly and the Armed light will come ON. Exit the premises through the door indicated by
your installer as the Exit/Entry door.
The panel will provide an exit delay period, indicated by keypad beeps, for you to exit the premises
without causing an alarm. At the end of the exit delay period, all keypad lights except the Armed
light will turn OFF and the system will be armed. You can restart the exit delay once by pressing the
Away button before the exit delay expires. The exit delay time can be changed by your installer.
Arming from an LCD Alphanumeric Keypad:
When this message appears, one or more zones are not secured. To
secure the system, close all doors and windows and cease all motion Secure System
in areas covered by motion detectors. Before Arming <>

When this message appears, use the arrow (< >) keys to verify that
the system is clear of troubles and that no zones are bypassed Enter Code to
unintentionally (see "Bypassing Zones” on page 13 and "Viewing Arm System <>
Trouble Conditions” on page 14).
If this display is showing, the system is in the Ready state and may
be fully armed. To arm the system, enter your access code. Enter Code to
Arm System

4
Once the correct access code has been entered, the display will be
as shown. The panel will provide an exit delay period, also indicated Exit Delay in
by keypad beeps, for you to exit the premises without causing an Progress
alarm. You can restart the exit delay once by pressing the Away
button before the exit delay expires. Exit through the door indicated
by your installer as the Exit/Entry door.
This message will be displayed once the exit delay expires and the
system is fully armed. Enter Code to
Disarm System

If this message appears, be aware of which zones are bypassed and

why (see "Bypassing Zones” on page 13). * Warning *
Bypass Active

NOTE: If you arm the system with a zone bypassed or with a trouble present, your security
protection is reduced.
Arming from an LCD Fixed Message/Icon Keypad
Before you can arm your system, all the zones must be closed. If some zones are open, the keypad
will display , and the Ready light will be off.
To see the numbers of the open zones, press . Before you try to arm your system, go to the open
zones and close all doors and windows. Make sure no one is present in zones with motion detectors.
If the green Ready light is ON, the system is ready for arming.
To arm the system, enter your access code and leave through the entry/exit door, or press and
hold for 2 seconds (if enabled). If the red Armed light is ON, the system has been armed
successfully.
T
Alternate Arming Methods
AF

Away Arming
Arming the system in the Away mode will have all interior zones and perimeter zones active. If
motion is detected in the interior zones, or if one of the perimeter zones is violated, the alarm
R

sequence will begin.

To arm in the Away mode, enter your access code and exit the premises through a designated Exit/
D

Entry door. The system will recognize that occupants have left the premises. Once the exit delay
expires, the system will be fully armed.
You can restart the exit delay once by pressing the Away button before the exit delay expires.
Audible Exit Fault
In an attempt to reduce false alarms, the Audible Exit Fault is designed to notify you of an
improper exit when arming the system in the Away mode. In the event that you fail to exit
the premises during the allotted exit delay period, or if you do not securely close the Exit/
Entry door, the system will notify you that it was improperly armed in two ways: the
keypad will emit one continuous beep and the bell or siren will sound. If this occurs, you
must re-enter the premises, enter your access code to disarm the system, and then follow
the arming procedure again, making sure to exit the premises in the proper fashion. Your
installer will inform you if the Audible Exit Fault feature has been enabled on your system.
Stay Arming
This feature, if enabled by your installer, will allow you to arm the perimeter zones (i.e. doors and
windows) while leaving the interior zones (i.e. motion sensors) inactive so that you can remain on
the premises while the system is armed. When you enter your security code to arm the system and
do not exit the premises through a designated Exit/Entry door, the system will arm in the Stay mode,
automatically bypassing the interior zones.
The interior zones can be reactivated at any time by entering [][1] at any keypad. If you reactivate
the interior zones, be sure to only inhabit areas not covered by motion detectors. To access areas
protected by motion sensors, you must enter your security code and disarm the system.
Night Arming

5
To fully arm the system when it has been armed in Stay Mode, press [][1] at any keypad. All
interior zones will now be armed except for devices programmed as Night Zones.
Night zones are only armed in Away mode. This permits limited movement within the premises
when the system is fully armed. Ensure that your installer has provided you with a list identifying
zones programmed as night zones.
When the interior zones have been activated (i.e., [][1]), you must enter your access code to disarm
the system to gain access to interior areas that have not been programmed as night zones.
Arming Without Entry Delay
If you wish to arm your system without the entry delay, enter [][9] then your access code. The
Armed light will flash as a reminder that the system is armed and has no entry delay. An entry
through any zone programmed as a delay zone will create an instant alarm.
Quick Arm
When the Quick Arm feature is enabled, the system may be armed by simply pressing [][0] instead
of your access code. Please note that pressing [][0] will only allow you to arm the system; to
disarm, you must enter a valid access code. Your installer will inform you if the Quick Arm feature
has been enabled on your system.
Auto Arming
Your system can be programmed to automatically arm itself according to a programmed schedule.
To program the auto arm time, enter [][6] followed by your master code. Press [3]. Enter the time
using the 24 Hr format (00:00 - 23:59).
To enable or disable the auto arm feature, enter [][6] followed by your master code. Press [2] to
either enable or disable the feature. The keypad will beep 3 times if the feature is ON and once if it
is OFF.
NOTE: The correct system time and date must be programmed in order for the auto arm feature
to function properly. Please see "Setting the System Date and Time” on page 14 for instructions.
T
Quick Exit
AF

When the Quick Exit feature is enabled, pressing [][0] while the system is armed will provide a two
minute window for you to exit the premises. During this time, you may open and close the
designated Entry/Exit door only once. Once the door is closed, the panel will end the two minute
R

quick exit delay. If the door is opened again, if the door is not closed after two minutes, or if another
zone is opened, the panel will begin the entry delay. Your installer will inform you if the Quick Exit
D

feature has been enabled on your system.

Disarming the System
Disarming from an LED Keypad:
Enter the premises through a designated Exit/Entry door; entering by any other door will sound an
immediate alarm. As soon as the Exit/Entry door is opened, the keypad will beep to indicate that the
system should be disarmed. Go to the keypad and enter your access code. If an error is made
entering the code, enter your code again. As soon as the correct code is entered, the Armed light
will go out and the keypad will stop beeping.
The correct access code must be entered before the entry delay period expires. If a valid access code
is not entered during this time, the system will go into alarm. The entry time delay may be changed
by your installer.
If an alarm occurred while the system was armed, the Memory light and the zone light
corresponding to the zone that caused the alarm will flash for 30 seconds. After the 30 second
period, the Memory light and zone light will stop flashing and the panel will return to the Ready
state. Pressing the [#] key during the 30 second period will cancel the alarm memory display. To view
other alarms, press [][3].
If a trouble was detected when the panel is disarmed, the Trouble light will turn ON. (See "Viewing
Trouble Conditions” on page 14 to determine the source of the trouble.) Please note that troubles
will not display while the system is in the Alarm Memory Display mode.

6
Disarming from an LCD Alphanumeric Keypad:
Upon entering through a designated Exit/Entry door, the keypad will
beep and the entry delay will commence, reminding you to disarm Entry Active
the system. The keypad will display the following message: Enter Your Code

Enter your access code. If an error is made in entering the code,

enter the code again. When a valid access code is entered, the System Disarmed
keypad will stop beeping. If no alarms occurred while the panel was No Alarm Memory
armed, and there are no troubles, the display will read:

After about 5 seconds, the system will return to the Ready state and
the display will read: Enter Code to
Arm System

If an alarm occurred while the system was armed, this message will
be displayed. Use the arrow (< >) keys to view which zones caused View Memory <>
the alarm. “Zone of Alarm”

If a zone is still in alarm, the display will show the following message
to indicate that a zone is open: Secure System
Before Arming <>

Upon disarming and if a trouble is present, this message will be

displayed. Use the arrow (< >) keys to view which troubles are Enter Code to
affecting the system (see "Viewing Trouble Conditions” on Arm System <>
page 14).
T
Disarming from an LCD Fixed Message/Icon Keypad
AF

Enter your access code to disarm anytime the system is armed (Armed ( ) indicator is on). The key-
pad will beep if you walk through the entry door. Enter your code within _____ seconds to avoid an
alarm condition (please check with your installer to have this time programmed).
R

Disarming Error
D

If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this hap-
pens, press [#] and try again.
NOTE: If you return and find that an alarm has occurred while you were away, it is possible that
an intruder may still be on the premises. Go to a neighbour's house, and call the local police to
investigate.
NOTE: The alarm memory is cleared each time the panel is armed so that any alarms showing
are alarms that occurred only during the last armed period.
Access Codes
Access codes are used to arm and disarm the system. There are 40 access codes available: 1 master
code, 36 regular access codes, 2 duress codes and 2 supervision codes. Ask your installer for more
information on using the duress and supervision codes.
Only the Master Code can be used to program additional security codes and to change other system
features, as well as to arm and disarm the security system. The Master Code will be supplied to you
by your installer. All keypad entries are made by pressing one key at a time.
All access codes can be programmed by following the procedure outlined in "Programming Access
Codes” on page 8.
NOTE: An access code can be a four- or six-digit number, depending on how your installer has
programmed your system. Ask your installer for more information regarding access codes.

7
When An Alarm Sounds
Fire Alarm
If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow
your emergency evacuation plan immediately (see "Fire Escape Planning” on page 24).
Intrusion Alarm
If a continuous Bell or Siren sounds, indicating an intrusion alarm, the alarm may be silenced by
entering your access code. If the alarm was unintentional, call local authorities immediately to avoid
an unnecessary response.
You can determine the source of the alarm by following the instructions in "Disarming the System”
on page 6. Once the source of the alarm has been corrected, the panel can be restored to its original
Armed state.
NOTE: A fire alarm has priority over a burglary type alarm.
When Alarm Sounds
The system can generate 3 different alarm sounds:
• Temporal/Pulsed Siren = Fire Alarm
• 4 beeps, 5-second pause, 4 beeps = Carbon Monoxide alarm
• Continuous Siren = Intrusion/Burglary Alarm
NOTE: The priority of signals is fire alarm, carbon monoxide alarm then burglary alarm.
Fire Alarm Pulsed Siren

Follow your emergency evacuation plan immediately!

If the fire alarm was accidental (burned toast, bathroom steam, etc.), enter your access code or
present your prox tag to silence the alarm. Call your alarm receiving center to avoid a dispatch.
Carbon Monoxide Alarm (to be activated by your installer)
T
Activation of your CO alarm indicates the presence of carbon monoxide (CO), which can be fatal.
AF

During an alarm, the red LED on the CO detector flashes rapidly and buzzer sounds with a repeating
cadence of: 4 quick beeps, 5-second pause, 4 quick beeps. If an alarm sounds:
1. Operate silence button.
R

2. Call emergency services or your fire department.

3. Immediately move outdoors or to an open door/window.
D

WARNING: Carefully review your Carbon Monoxide Installation/User Guide to determine the
necessary actions required to ensure your safety and ensure that the equipment is operating
correctly. Incorporate the steps outlined in the guide into your evacuation plan.

Intrusion (Burglary) Alarm Continuous Siren

If you are unsure of the source of the alarm, proceed with caution! If the alarm was accidental,
enter your access code or present your prox tag to silence the alarm.
Function Keys
The PK55XX keypads have five function keys—marked Stay, Away, Chime, Reset and Exit.
Corresponding function keys on the PC1555RKZ are number keys 1 to 5 respectively. The LED5511
and LCD5511 keypads have four function keys—marked Stay, Away, Chime and Aux. The
PC1404RKZ keypad has four function keys, programmed by your installer. These keys allow single-
button activation of the most commonly used features. If these keys have been enabled by your
installer, you can execute the programmed function by pressing and holding the corresponding key
for two seconds. For more information regarding the operation of the function keys, talk to your
alarm system installer.
Programming Access Codes
Programming Codes from an LED Keypad:
The Master Code
If the installer has programmed the Master Code as not user changeable, it will only be accessible
through the installer’s section.

8
If the Master Code has been programmed as user changeable, to program the Master Code, enter
[][5][current Master Code][40][new Master Code]. Press [#} to return to the Ready state. Record
your new Master Code in the section "System Keypads” on page 2.
Note: We recommend that the factory default or obvious codes such as [1111] or [1234] not be
used.
Additional Codes
Up to 39 additional access codes (01 through 39) may be programmed.
Access Codes
To program a new code:
Enter [][5][Master Code][code number 01 to 39][new access code]. The code number is a double
digit from 01 to 39. Access codes may be 4-6 digits, as indicated by your installer. Enter digits 0
through 9 only. Press [#] to return to the Ready state.
If an access code already exists for the code number you have selected, it will be replaced by the
new code. Record your new code(s) in the section "System Keypads” on page 2.
System Indicator (PC1555RKZ Only):
If the System indicator is ON, one or more of these conditions could be present on the system:
System Busy
System Troubles (See "Viewing Trouble Conditions” on page 14).
Alarm Memory (See "Disarming the System” on page 6”).
Zone Bypassing (See "Bypassing Zones” on page 13”).
Programming The System indicator will flash when you are programming access codes or
performing other programming functions. If someone is programming at another keypad, the
System indicator will turn ON to indicate that the system is busy.
NOTE: If you have a PC1555RKZ keypad, the System indicator acts as a Trouble, Memory,
T
Programming and Bypass indicator. Unlike the other keypads, these conditions will only be
represented by the System indicator. Please keep this in mind when reading about other
AF

functions in this manual.

System Status LED Indicators (All Keypads)
Ready (green)
R

If the Ready indicator is ON, the system is ready for arming. The system cannot be armed unless the
Ready indicator is ON (see "When An Alarm Sounds” on page 8.
D

Armed (red)
If the Armed indicator is ON, the system has been armed successfully.
Trouble or System Indicator

If the Trouble icon or System icon (LED5511) is lit, see "Viewing Trouble Conditions” on
page 14”.
Emergency Keys
PC1404RKZ:
Press the 1 and 3 keys together for two seconds to send a FIRE transmission.
Press the 4 and 6 keys together for two seconds to send an AUXILIARY transmission.
Press the 7 and 9 keys together for two seconds to send a PANIC transmission.
LCD5511, LED5511:
Press both Keys for two seconds to send a FIRE transmission.
Press both Keys for two seconds to send an AUXILIARY transmission.
Press both Keys for two seconds to send a PANIC transmission.

9
PK55XX:
Press the Key for two seconds to send a FIRE transmission.
Press the Key for two seconds to send an AUXILIARY transmission.
Press the Key for two seconds to send a PANIC transmission.
PC1555RKZ:
Press the [F] key for two seconds to send a FIRE transmission.
Press the [A] key for two seconds to send an AUXILIARY transmission.
Press the [P] key for two seconds to send a PANIC transmission.
* IMPORTANT NOTE (All Keypads): The Fire, Auxiliary and Panic keys will NOT function unless
programmed by the installer. If these keys are in service and the installer has enabled audible
feedback, holding down the key for two seconds will cause the keypad sounder to beep, indicating
that the input has been accepted and transmission is underway.
NOTE: In the U.S.A. the [A] and keys are programmed to be used for non-medical emergen-
cies only, as per UL requirements.
Display Icons (LCD Fixed Message/Icon Keypad)
Memory Icon
If the Memory icon is ON upon disarming (See "Disarming the System” on page 6), an alarm has
occurred while the system was armed.
Bypass Icon
If the Bypass icon is ON, one or more zones are bypassed (See "Bypassing Zones” on page 13).
Fire Icon
If the Fire icon is ON, a fire alarm has occurred (See "Fire Alarm Operation” on page 15).
T
Night Light Feature (PC1404RKZ only)
AF

Lights on the left and right sides of the keypad make the keypad easier to locate in the dark. The
color of the lights follow the status of the alarm system.
If the night light LEDs are SOLID RED, the partition is in the armed state with no alarms in memory.
R

If the night light LEDs are FLASHING RED, the partition is in the armed state and there are alarms in
memory.
D

If the night light LEDs are YELLOW, the system has a trouble condition.
If the night light LEDs are GREEN, the system is ready to arm.
Program Icon
The Program icon will flash when you are programming access codes or performing other
programming functions. If someone is programming at another keypad, the Program icon will turn
ON to indicate that the system is busy.
AC Icon
The AC icon (LCD5511) (PK55XX/PC1404RKZ) is displayed when power is present at the
main panel.
Armed Icon
The armed icon indicates that the panel is armed in either Away or Stay mode. The icons
turn on at the beginning of the Exit Delay.
For the PC1404RKZ, the armed light indicates that the panel is armed for both Away and Stay
modes.
Chime Icon
This icon (LCD5511) (PK55XX) turns on when Door Chime is enabled on the system.
Open Icon
When zones are opened, this icon will turn on and the open zones will be displayed.
Alarm Memory
When an alarm occurs, the Memory or System indicator (and Fire indicator, if applicable) will turn on.

10
To view which sensor(s) generated the alarm, press . The Memory or System indicator and
corresponding sensor number will flash (i.e. sensor 3).
For the PK5500 keypad use the scroll keys to view the sensors in alarm memory.
Press to exit. To clear the memory, arm and disarm the system.
If an alarm sounded while armed, the keypad will automatically go to alarm memory when you
disarm the system. In this instance, you should approach with caution, as the intruder may still be
within the building/premises.
Door Chime (Entry/Exit Beeps)
To turn the door chime function on or off, press and hold the Chime key ( ) for 2 seconds or
press .
Access Code Programming
In addition to the Master Access Code, you can program up to 39 additional User Access codes.
Press , plus your Master Access Code. The Program or System indicator will begin to flash,
and the Armed ( ) indicator will turn on.
Enter the 2-digit number to be programmed (i.e. 06 for user access code 6; enter 40 for the Master
Access Code).
When using the PK5500,use the keys to find the specific code and press to select. Enter
the new 4 -digit access code, or press to erase it. When programming is complete, enter another
2-digit code to program or press to exit.
Access Codes
[][5][Master Code] (when disarmed)
The [][5] User’s Programming command is used to program additional access codes.
Master Code (Access Code 40) - The Master Code can only be changed by the Installer, if pro-
T
grammed.
Supervisor Codes - These codes are always valid when entering the User Code Program-
AF

ming section. However, these codes can only program additional codes which have equal or lesser
attributes. Once programmed, the Supervisor Codes receive the Master Code’s attributes. These
attributes are changeable. Any User Code can be made a supervisor code by enabeling User Code
R

Attribute 1 (please see below for details).

Duress Codes - Duress codes are standard User Codes that will transmit the Duress Reporting Code
D

whenever the code is entered to perform any function on the system. Any User Code can be made a
Duress Code by enabling User Code Attribute 2 (please see below for details).
NOTE: Duress codes are not valid when entering [][5], [][6] or [][8] sections.
NOTE: Access codes cannot be programmed as a duplicate or as a “Code +1”.
User Code Attributes
1. The default attributes of a new code will be the attributes of the code used to enter
whether it is a new code or an existing code being programmed.
2. System Master (Code 40) has Partition Access for all partitions, as well as Attributes 3-4 ON by
default.
NOTE: These attributes are not changeable.
Inherent Attributes (all codes except installer and maintenance)
Arm/Disarm - Any Access Code with Partition Access enabled will be valid for arming and disarming
that partition.
Command Outputs ([][7][1], [][7][2], [][7][3], and [][7][4]) - If these outputs require Access
Code entry, any Access Code with Partition Access will be valid for performing the [][7][1-4][Access
Code] functions on that partition.
Programmable Attributes ([][5][Master/Supervisor Code][9][Code])
1. Supervisor Code
2. Duress Code
3. Zone Bypassing Enabled
4. Remote Access

11
5. For Future Use
6. For Future Use
7. Bell Squawk upon Arming/Disarming
8. One Time Use Code
Bell Squawk Attribute
This attribute is used to determine whether an access code should generate an arming/disarming
Bell Squawk upon entry of the code for Away arming. The Wireless Keys with access codes associ-
ated with them may generate Arming/Disarming Bell squawks. If desired, this option may be used
with codes that are manually entered. Please contact your installer to have this programmed.
NOTE: The Master Code cannot use the Bell Squawk attribute, but is required to enable it for
other codes.
NOTE: This feature cannot prevent the Arm/Disarming squawks from being generated if an
access code assigned to a WLS Key is manually entered at a keypad.
Programming Codes
Programming codes from an LCD Keypad:
Master Code
Press the [] key to enter the function list. Scroll (< >) to
Press (*) for <>
Access Codes

Press [5] or []. The display will read

Enter Master
Access Code
T
Enter your current Master Code. The display will read
AF

(*) to Edit <>

User Code 40P

“40P” represents the Master Code. Press the [] key to indicate that
R

you wish to program the Master Code. The display will read Enter New Code
1234 <>
D

Enter the new Master Code. The Master Code must be four digits
unless otherwise indicated by your installer. Enter digits 0 through 9 (*) to Edit <>
only. Once the new code is entered, the keypad will beep 3 times User Code 40P
and the display will read

Press [#] to exit the code programming function.

Be sure to record your new Master Code on the “System Information” page in this booklet.
Note: We recommend that the factory default Master Code [1234] not be used.
Additional Access Codes
To erase, add or change a user code, press [] to enter the
functions list. Use the arrow (< >) keys to scroll to the following Press <*> for <>
message Access Codes

Press []. Display will read

Enter Master
Access Code

Enter the Master Code. Display will read...

[*] to Edit <>
User Code 01P

12
Use the scroll keys (< >) to find the access code – indicated by
“02P” to “32P” – you wish to add, change or delete. Press the [] Enter New Code
key to select the code you wish to alter. The display will read 1234 <>

To add or change a code, enter the new code. Access codes must
be four digits unless otherwise indicated by your installer. Enter [*] to Edit <>
digits 0 through 9 only. To delete an access code, enter []. Once User Code 01P
the 4 digit code or [] has been entered, the keypad sounder will
beep 3 times and the display will read
The “P” means the code has been programmed. If there is no “P”
then that code is deleted. Press [#] to exit the code programming
function. The Master Code cannot be erased.

To erase a code:
Enter [][5][Master Code][code number 01 to 32][]. Press [#] to return to the Ready state. The
Master code cannot be erased.

Be sure to record your new codes on the “System Information” page in this booklet.
Bypassing Zones
Use the zone bypassing feature when you need access to a protected area while the system is
armed, or when a zone is temporarily out of service but you need to arm the system. Zones that are
temporarily out of service due to damaged wiring or contacts may be bypassed to allow system
arming until repairs can be made.
Bypassed zones will not be able to sound an alarm. Zones cannot be bypassed once the system is
armed. Bypassed zones (except for 24-hr zones) are automatically cancelled each time the system is
T
disarmed and must be bypassed again, if required, before the next arming.
AF

NOTE: For security reasons, your installer may program the system to prevent you from
bypassing certain zones.
Bypassing zones reduces your security protection. If you are bypassing a zone because it is not
working, call a service technician immediately so that the problem can be resolved and your
R

system returned to proper working order. Ensure that no zones are unintentionally bypassed
when arming your system.
D

To bypass zones from an LED keypad:

Start with the system in the Ready state. Enter [][1][Zone number(s) to be bypassed].
Enter the zone(s) as a two-digit number from 01 to 08. As each zone is bypassed, the corresponding
zone light will turn ON. If a zone is bypassed by mistake, press that zone number again and the zone
light will turn OFF, indicating that the zone is not bypassed. Press [#] to return to the Ready state.
To bypass zones from an LCD keypad:
To bypass a zone, the system must be in the Ready state. The
display will read Enter Code to
Arm System

Press the [] key to enter the functions menu. The display will read
Press <*> for <>
Zone Bypass

Press the [] key to enter the zone bypassing mode. The display
will read Zone Search <>
“Zone Name”

13
Use the arrow (< >) keys to find the zone to be bypassed and press
the [] key to select it. “B” will appear on the display to show that Zone Search <>
the zone is bypassed. To unbypass a zone, enter the zone number; “Zone Name” B
the “B” will disappear from the display to show that the zone is no
longer bypassed.

This display will be shown if a zone was open when you entered
the bypassing command. The open zone will be represented by Zone Search <>
“O”. If you bypass the open zone, the “O” will be replaced by a “Zone Name” O
“B”.

To exit the bypassing mode and return to the Ready state, press the
[#] key.

Viewing Trouble Conditions

The control panel continuously monitors a number of possible trouble conditions. If one of these
trouble conditions occurs, the keypad will beep twice every 10 seconds until you press any key on
the keypad.
Note: A TROUBLE condition reduces the security your system is designed to provide. Call your
installing company for service.
To view troubles from an LED Keypad:
A trouble will be indicated by the Trouble light (or System light on a PC1555RKZ keypad or LED5511
keypad) which will remain ON until the trouble condition is cleared. If you cannot determine the
cause of the trouble condition, contact your installer for assistance.
T
To view the type of trouble condition, press [][2]. One or more zone lights will turn ON, indicating
the various trouble conditions:
AF

ZONE LIGHT TYPE OF TROUBLE

1 Service required. Call your installation company for service.
R

2 Indicates the loss of AC power. When this trouble occurs, the Trouble (or System) light will
turn ON but keypad buzzer will not sound until there is a low battery connection.
D

3 Telephone line trouble.

4 The panel has failed to communicate with the central station.
5 Zone fault. Press [5] and the zone light(s) corresponding to the faulted zones will turn ON.
6 Zone tamper. Press [6] and the zone light(s) corresponding to the tampered zones will turn
ON.
7 Not supported.
8 Loss of time on system clock. To set the system time, follow the instructions in “Setting Sys-
tem Date and Time” below.

To view troubles from an LCD Keypad:

From the Ready state, use the arrow (< >) keys to scroll to the
following message: System Trouble
<*2> to View <>

Press [][2] to view the trouble. The display will read

View Trouble <>
“Trouble Message”

Setting the System Date and Time

To set the system time, enter [][6] followed by the Master Code. Press [1]. The keypad will now
accept 10 consecutive digits:
••Enter the Time in Hours and Minutes using the 24 Hour format (00:00 to 23:59).

14
•Enter the Date in Months, Days and Years (MM DD YY).
NOTE: If you have an LCD keypad, your installer may have programmed your system to display
the time and date while the keypad is idle. If this is the case, you may have to press the [#] key to
clear the date and time before entering an access code to arm the system, or before performing
any other keypad function.
Door Chime Feature
The door chime feature is used to provide a tone from the keypad each time a door or window is
opened or closed. The doors and windows which will provide this indication are programmed by
your installer.
To activate the door chime from an LED Keypad:
Enter [][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad
buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is
disabled.
To activate the door chime from an LCD Keypad:
Press [] to enter the function list, then scroll to find
Press <*> for <>
Door Chime

Press [] or [4] to enable or disable the Door Chime feature. Press
[#] to return to the Ready state.

Keypad Options
All Keypads
Keypad Sounder Control
T
The LCD keypad will allow you to select from 21 different keypad tones. From an LCD keypad, enter
[][6][Master Code], then use the arrow keys (< >) to scroll to the message "Keypad Buzzer
AF

Control". Press [] to select. Use the arrow keys (< >) to scroll to the desired keypad sound level and
press the [#] key to exit. This feature can be accessed on LED keypads by holding the [] key.
LCD Keypads Only
R

NOTE: The following three options are accessed by entering [] [6] [Master code]. Use the arrow
(< >) keys to scroll to the appropriate message and press [] to select.
D

Brightness Control
The LCD keypad will allow you to select from 10 different backlighting levels. Use the arrow keys (< >)
to scroll to the desired backlighting level and press the [#] key to exit.
Contrast Control
The LCD keypad will allow you to select from 10 different display contrast levels. Use the arrow keys
(< >) to scroll to the desired contrast level and press the [#] key to exit.
Viewing the Event Buffer from an LCD Keypad
Select “View Event Buffer” from the [][6] menu. The keypad will display the event, event number,
time and date along with the zone number and user code, if applicable. Press [] to toggle between
this information and the event itself. Use the arrow keys (< >) to scroll through the events in the
buffer. When you have finished viewing the Event Buffer, press the [#] key to exit.
Downloading Enable
To enable a six-hour downloading window from any system keypad, enter [] [6] [Master Code] [5].
During this time, the panel will answer incoming downloading calls. For more information, please
ask your installer.
Fire Alarm Operation
Alarm
On a fire alarm, the bell or siren will activate following the programmed cadence.
Silence
To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not
reset, the alarm will re-sound after 90 seconds.
Resetting Smoke Detectors

15
Once the smoke detector is reset, if it still detects smoke, the alarm sequence will re-sound as
described above. If there is no smoke, the system will return to normal.
To reset smoke detectors from an LED Keypad:
Press [][7][2].
To reset smoke detectors from an LCD Keypad:
Press [] to enter the function list, then scroll to find
Press <*> for <>
Output Control

Press [] to select the output control. The display will read
Select Output <>
Command Output #1

Use the arrow (< >) keys to find the following message and press
the [] key to select Select Output <>
Command Output #2

NOTE: If you suspect that a fire alarm has been transmitted and that there is no fire condition, call
the monitoring station to avoid an unnecessary response. If a fire condition is apparent, follow your
evacuation plan immediately. If the alarm sounds at night, evacuate immediately.
T
AF
R
D

16
User Function Commands
First disarm the system then enter [Master Code]
The command is used to gain access to the following list of Master functions of the system.
[1] Time and Date
Enter 4 digits for 24 Hour System Time (HH-MM). Valid entries are 00-23 for the hour and 00-59 for
minutes.
Enter 6 digits for the Month, Day and Year (MM-DD-YY)
[2] Auto-arm Control
Pressing [2] while in the User Function menu will enable (3 beeps) or disable (one long beep) the
Auto-arm feature, by partition. With this feature enabled, the panel will automatically arm in the
Away mode (Stay Away zones active) at the same time each day. The auto-arm time is programmed
with the [][6][Master Code][3] command.
[3] Auto-arm Time
The system can be programmed to arm at a programmed time each day, per partition. Upon entry of
this section, enter 4 digits for the 24-hour Auto-arm time for each day of the week.
At the selected auto-arm time, the keypad buzzers will sound for a programmed amount of time
(programmable by the installer only) to warn that an auto-arm is in progress. The bell can also be
programmed to squawk once every 10 seconds during this warning period. When the warning
period is complete, the system will arm with no exit delay and in the Away Mode.
Auto-arming can be cancelled or postponed by entering a valid access code only during the pro-
grammed warning period. Auto-arming will be attempted at the same time the next day. When the
auto-arming process is cancelled or postponed, the Auto-arm Cancellation Reporting Code will be
transmitted (if programmed).
If arming is inhibited by one of the following, the Auto-arm Cancellation transmission will be com-
T
municated.
AF

- AC/DC Inhibit Arm

- Latching System Tampers
- Zone Expander Supervisory Fault
R

[4] System Test

D

The system’s Bell Output (2 s), Keypad Lights and Communicator are tested. This test will also mea-
sure the panel’s standby battery.
[5] Enable DLS / Allow System Service
If enabled, the installer will be able to access Installer Programming by DLS or via the keypad [][8].
In case of DLS access, this provides a window where rings will be detected by the panel. Depending
on the option programmed, the DLS window will remain open for either 1 or 6 hrs, allowing the
installer to enter DLS one time or an unlimited number of times, respectively. After the 1-hr or 6-hr
window has expired, Installer’s Programming will be unavailable again until the window is re-
opened.
[6] User Call-up
If enabled by the Installer, the panel will make 1 attempt to call the downloading computer. The
downloading computer must be waiting for the panel to call before downloading can be performed.
[7] Music Input On/Off
If enabled on the PC5936 Audio Interface Module, the user can turn Background Music On or Off
using this function.
[8] User Walk Test
This test allows the user to verify operation of system detectors and notifies the central station that
a Walk Test is in progress.
NOTE: Fire zones, the 'F' key, and 2-wire smoke detectors are excluded from this test. Violation
of these zones will cause the system to exit the walk test, then generate and transmit an alarm
condition to the central station.

17
1. Press 6 to enable Walk Test. The system will notify the Central Station that a walk test
has begun.
2. Violate all each detector (zone) in sequence. A squawk will occur at the keypad, and the viola-
tion will be recorded in the Event Buffer.
3. Restore zones. Press 6 to end the Walk Test. The system will notify the Central Station
that the walk test has been terminated.
NOTE: If a zone is not violated within 15 minutes of activating the Walk Test, the system will
automatically exit the Walk Test and resume normal operation.
Changing Brightness/Contrast
PK5500 keypads
When this option is selected, the keypad will allow you to scroll through 10 different brightness/con-
trast levels.
1. Press [Master code].
2. Use the keys to scroll to either Brightness Control or Contrast Control.
3. Press to select the setting you want to adjust.
4. a) “Brightness Control”: There are multiple backlighting levels. Use the keys to scroll to
the desired level.
b) “Contrast Control”: There are 10 different display contrast levels. Use the keys to
scroll to the desired contrast level.
5. To exit, press .
PK5501/PK5508/PK5516 keypads
When this option is selected, the keypad will allow you to scroll through 4 different backlighting lev-
T
els. A level of 0 disables the backlighting.
AF

1. Press [Master Code].

2. Use the key to move through the 4 different backlighting levels.

R

3. The level is automatically saved when you press to exit.

D

Changing the Buzzer Level

PK5500 keypads
When this option is selected, the keypad will allow you to scroll through 21 different buzzer levels.
A level of 00 disables the buzzer.
1. Press [Master Code].
2. Use the keys to scroll to Buzzer Control.
3. There are 21 different levels, use the keys to scroll to the desired level.
PK5501/PK5508/PK5516 keypads
1. Press [Master Code].
2. Use the key to move through the 21 different buzzer levels.

3. The level is automatically saved when you press to exit.

PC1404RKZ keypad
To make the keypad audible for people who have trouble hearing certain frequencies, the keypad
buzzer frequency can be adjusted by pressing and holding the [Q] key. After the key has been
pressed for 2 seconds, the keypad frequency will change and emit a beep so the user can hear the
new tone. If the key is held, every second the keypad will change the frequency and sound another
tone.

18
Viewing the Event Buffer from a PK5500 Keypad
The event buffer will show you a list of the last 500 events that have occurred on your system. You
must use an LCD keypad to view the event buffer.
1. Press [Master Code].
2. To select Event Buffer viewing, press .
3. The keypad will display the event number, partition or area, and the time and date. Press to
switch between this information and the event details.
4. Use the keys to scroll through the events in the buffer.
5. To exit event buffer viewing, press .
Sensor Reset
Certain sensors, after having detected an alarm condition, require a reset to exit the alarm condition
(i.e. glass break sensors, smoke detectors, etc.). Ask your alarm company if this function is required
on your system.
To reset the detectors, press and hold the Reset ( ) key for 2 seconds or press .
NOTE: If a sensor fails to reset, it may still be detecting an alarm condition. If the sensor reset is
successful, the alarm is cancelled. If unsuccessful, the alarm will reactivate or continue.

T
AF
R
D

19
System Information
Fill out the following information for future reference and store this manual in a safe place.
Access Codes
Your Master Code is: _________________________
Additional Access Codes:

1 19

2 20

3 21

4 22

5 23

6 24

7 25

8 26

9 27

10 28
T
AF

11 29

12 30
R

13 31
D

14 32

15 33

16 34

17 35

18 36

Zone Information
There are ________ active zones on the system.

Zone Protected Area Zone Type

20
Zone Protected Area Zone Type

[F] FIRE

[A] AUXIL-
IARY

[P] PANIC

The Exit Delay Time is ________ seconds.

The Entry Delay Time is ________ seconds.

For Service

Central Sta- Account #: Telephone #:

tion __________________________ ________________________
T
Information _ __
AF

Installer Company: Telephone #:

Information __________________________ ________________________
R

_ __
D

21
Testing Your System
Alarm Test
The Alarm Test provides a two-second test of the keypad sounder and bell or siren. The keypad lights
and communicator are also tested, as well as the panel's standby battery.
Begin with the panel in the Ready state.
From an LED keypad, enter [][6][Master Code][4] then press [#] to return to the Ready state.
From an LCD keypad, press [] to enter the functions list. Use the arrow (< >) keys to scroll to find
“User Functions” and press [] to select. :
Enter your Master Code and scroll to find the following
message: Select Option <>
System Test

Press [] to perform an Alarm Test. The keypad will display the
following message: System Test
in Progress

Press [#] to return to the Ready state. Secure System

Before Arming <>

Full System Test

We recommend that you test your system weekly. Should the system fail to function properly, call
your installation company immediately for service.
NOTE: Perform system tests during off-peak hours, such as early morning or late evening.
4. Inform the monitoring station that you are testing your system.
T
5. Begin with the system in the Ready state.
AF

6. Perform a Bell/Battery test by pressing [][6][Master Code][4]. The bell and keypad buzzer will
sound for two seconds and all keypad lights will turn ON. Press [#] to exit.
7. Activate each sensor in turn (e.g., open a door/window or walk in motion detector areas). From
R

an LED keypad, observe the zone light turn ON when the zone is activated. The zone light will
turn OFF when the system restores to normal (i.e. door or window closed). From an LCD key-
pad, the following message will be displayed when each zone is activated:
D

Use the arrow (<>) keys to view which zone is open. This message will disappear when the zone is
restored.
8. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed
mode.
CAUTION: Do not use an open flame or burning materials to test a smoke or heat detector.
Contact your installer for information on safe methods of testing detectors.
9. When testing is complete, call and advise the monitoring station. Should the system fail to
function properly, contact your installer.
NOTE: Some features described above will not be functional unless enabled by your installer.
Please ensure that your installer has advised you which features are functional on your system.
Walk Test Mode
The installer can initiate a Walk Test mode for the system. While in Walk Test mode, The Ready,
Armed, and Trouble LEDs will flash to indicate that Walk Test is active. When the system automati-
cally terminates the Walk Test modes, it will annunciate with an audible warning (5 beeps every 10
seconds), beginning five minutes prior to the termination of the test.
Allowing Computer Access To Your System
From time to time, your installer may need to send information to or retrieve information from your
security system. Your installer will do this by having a computer call your system over the telephone
line. You may need to prepare your system to receive this ‘downloading’ call. To do this, press
[][6][Master Code] [5] at any keypad. This allows downloading for a limited period of time. During
this time, the system will answer incoming downloading calls.
For more information on this feature, please ask your installer.

22
Guidelines for Locating Smoke Detectors and CO Detectors
The following information is for general guidance only and it is recommended that local fire codes and reg-
ulations be consulted when locating and installing smoke and CO alarms.
Smoke Detectors
Research has shown that all hostile fires in homes generate smoke to a greater or lesser extent. Experiments
with typical fires in homes indicate that detectable quantities of smoke precede detectable levels of heat in
most cases. For these reasons, smoke alarms should be installed outside of each sleeping area and on each
storey of the home.
The following information is for general guidance only and it is recommended that local fire codes and reg-
ulations be consulted when locating and installing smoke alarms.
It is recommended that additional smoke alarms beyond those required for minimum protection be installed.
Additional areas that should be protected include: the basement; bedrooms, especially where smokers sleep;
dining rooms; furnace and utility rooms; and any hallways not protected by the required units.
On smooth ceilings, detectors may be spaced 9.1m (30 feet) apart as a guide. Other spacing may be required
depending on ceiling height, air movement, the presence of joists, uninsulated ceilings, etc. Consult National
Fire Alarm Code NFPA 72, CAN/ULC-S553-02 or other appropriate national standards for installation recom-
mendations.
• Do not locate smoke detectors at the top of peaked or gabled ceilings; the dead air space in these loca-
tions may prevent the unit from detecting smoke.
• Avoid areas with turbulent air flow, such as near doors, fans or windows. Rapid air movement around
the detector may prevent smoke from entering the unit.
• Do not locate detectors in areas of high humidity.
• Do not locate detectors in areas where the temperature rises above 38oC (100oF) or falls below 5oC
(41oF).
• Smoke detectors should always be installed in USA in accordance with NFPA 72, the National Fire Alarm
Code. Where required by applicable laws, codes, or standards for a specific type of occupancy,
approved single- and multiple-station smoke alarms shall be installed as follows:
T
(1) In all sleeping rooms and guest rooms.
AF

(2) Outside of each separate dwelling unit sleeping area, within 6.4 m (21 ft) of any door to a sleeping room,
the distance measured along a path of travel.
(3) On every level of a dwelling unit, including basements.
R

(4) On every level of a residential board and care occupancy (small facility), including basements and exclud-
ing crawl spaces and unfinished attics.
D

(5) In the living area(s) of a guest suite.

(6) In the living area(s) of a residential board and care occupancy (small facility).

Figure 1 Figure 2 Figure 3

Figure 3a Figure 4

23
Carbon Monoxide Detectors
Carbon monoxide is colorless, odorless, tasteless, and very toxic. It
also moves freely in the air. CO detectors can measure the
concentration and sound a loud alarm before a potentially BEDROOM
harmful level is reached. The human body is most vulnerable to
BEDROOM BEDROOM
the effects of CO gas during sleeping hours; therefore, CO
detectors should be located in or as near as possible to sleeping KITCHEN GARAGE
GROUND
areas of the home. For maximum protection, a CO alarm should FLOOR
be located outside primary sleeping areas or on each level of your BASEMENT
home. Figure 5 indicates the suggested locations in the home.
Do NOT place the CO alarm in the following areas: CARBON MONOXIDE DETECTOR

• where the temperature may drop below -10ºC or exceed 40ºC Figure 5
• near paint thinner fumes
• within 5 feet (1.5m) of open flame appliances such as furnaces, stoves and fireplaces
• in exhaust streams from gas engines, vents, flues or chimneys
• in close proximity to an automobile exhaust pipe; this will damage the detector
PLEASE REFER TO THE CO DETECTOR INSTALLATION AND OPERATING INSTRUCTION
SHEET FOR SAFETY INSTRUCTIONS AND EMERGENCY INFORMATION.
Household Fire Safety Audit
Most fires occur in the home. To minimize this danger, we recommend that a household fire safety
audit be conducted and a fire escape plan be developed.
1. Are all electrical appliances and outlets in a safe condition? Check for frayed cords,
overloaded lighting circuits, etc. If you are uncertain about the condition of your electrical
appliances or household service, have a professional evaluate these units.
2. Are all flammable liquids stored safely in closed containers in a well-ventilated cool area?
T
Cleaning with flammable liquids should be avoided.
3. Are fire hazardous materials (matches) well out of reach of children?
AF

4. Are furnaces and wood burning appliances properly installed, clean and in good working
order? Have a professional evaluate these appliances.
Fire Escape Planning
R

There is often very little time between the detection of a fire and the time it becomes deadly. It is
thus very important that a family escape plan be developed and rehearsed.
D

1. Every family member should participate in developing the escape plan.

2. Study the possible escape routes from each location within the house. Since many fires occur
at night, special attention should be given to the escape routes from sleeping quarters.
3. Escape from a bedroom must be possible without opening the interior door.
Consider the following when making your escape plans:
•Make sure that all perimeter doors and windows are easily opened. Ensure that they are not
painted shut and that their locking mechanisms operate smoothly.
•If opening or using the exit is too difficult for children, the elderly or handicapped, plans for res-
cue should be developed. This includes making sure that those who are to perform the rescue
can promptly hear the fire warning signal.
•If the exit is above the ground level, an approved fire ladder or rope should be provided as well
as training in its use.
•Exits on the ground level should be kept clear. Be sure to remove snow from exterior patio doors
in winter; outdoor furniture or equipment should not block exits.
•Each person should know of a predetermined assembly point where everyone can be
accounted for, e.g., across the street or at a neighbour's house. Once everyone is out of the
building, call the Fire Department.
•A good plan emphasizes quick escape. Do not investigate or attempt to fight the fire, and do not
gather belongings or pets as this wastes valuable time. Once outside, do not re-enter the house.
Wait for the fire department.
•Write the fire escape plan down and rehearse it frequently so that should an emergency arise,
everyone will know what to do. Revise the plan as conditions change, such as the number of
people in the home, or if there are changes to the building's construction.

24
•Make sure your fire warning system is operational by conducting weekly tests (see "Door Chime
Feature” on page 15). If you are unsure about system operation, contact your installing dealer.
•We recommend that you contact your local fire department and request further information on
fire safety and escape planning. If available, have your local fire prevention officer conduct an in-
house fire safety inspection.

T
AF
R
D

25
 D
R

26
AF
T
 IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and Components
is copyrighted and is purchased under the following license terms:
• This End-User License Agreement (“EULA”) is a legal agreement event, You must destroy all copies of the SOFTWARE PRODUCT and all of its
between You (the company, individual or entity who acquired the Soft- component parts.
ware and any related Hardware) and Digital Security Controls, a divi- (g) Trademarks - This EULA does not grant You any rights in connection with any
sion of Tyco Safety Products Canada Ltd. (“DSC”), the manufacturer trademarks or service marks of DSC or its suppliers.
of the integrated security systems and the developer of the software 3. COPYRIGHT - All title and intellectual property rights in and to the
and any related products or components (“HARDWARE”) which You SOFTWARE PRODUCT (including but not limited to any images,
acquired. photographs, and text incorporated into the SOFTWARE PRODUCT), the
• If the DSC software product (“SOFTWARE PRODUCT” or “SOFT- accompanying printed materials, and any copies of the SOFTWARE
WARE”) is intended to be accompanied by HARDWARE, and is NOT PRODUCT, are owned by DSC or its suppliers. You may not copy the
accompanied by new HARDWARE, You may not use, copy or install printed materials accompanying the SOFTWARE PRODUCT. All title and
the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes com- intellectual property rights in and to the content which may be accessed
puter software, and may include associated media, printed materials, through use of the SOFTWARE PRODUCT are the property of the
and “online” or electronic documentation. respective content owner and may be protected by applicable copyright
• Any software provided along with the SOFTWARE PRODUCT that is or other intellectual property laws and treaties. This EULA grants You no
associated with a separate end-user license agreement is licensed to rights to use such content. All rights not expressly granted under this
You under the terms of that license agreement. EULA are reserved by DSC and its suppliers.
• By installing, copying, downloading, storing, accessing or otherwise 4. EXPORT RESTRICTIONS - You agree that You will not export or
using the SOFTWARE PRODUCT, You agree unconditionally to be re-export the SOFTWARE PRODUCT to any country, person, or entity
bound by the terms of this EULA, even if this EULA is deemed to be a subject to Canadian export restrictions.
modification of any previous arrangement or contract. If You do not 5. CHOICE OF LAW - This Software License Agreement is governed by the
agree to the terms of this EULA, DSC is unwilling to license the SOFT- laws of the Province of Ontario, Canada.
WARE PRODUCT to You, and You have no right to use it.
6. ARBITRATION - All disputes arising in connection with this
SOFTWARE PRODUCT LICENSE Agreement shall be determined by final and binding arbitration in
The SOFTWARE PRODUCT is protected by copyright laws and accordance with the Arbitration Act, and the parties agree to be bound by
international copyright treaties, as well as other intellectual property the arbitrator’s decision. The place of arbitration shall be Toronto,
laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. Canada, and the language of the arbitration shall be English.
1. GRANT OF LICENSE This EULA grants You the following rights: 7. LIMITED WARRANTY
(a) Software Installation and Use - For each license You acquire, You may have (a) NO WARRANTY - DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT
only one copy of the SOFTWARE PRODUCT installed. WARRANTY. DSC DOES NOT WARRANT THAT THE SOFTWARE WILL MEET
(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, YOUR REQUIREMENTS OR THAT OPERATION OF THE SOFTWARE WILL BE
T
accessed, displayed, run, shared or used concurrently on or from different UNINTERRUPTED OR ERROR-FREE.
computers, including a workstation, terminal or other digital electronic device (b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for
AF

(“Device”). In other words, if You have several workstations, You will have to problems caused by changes in the operating characteristics of the
acquire a license for each workstation where the SOFTWARE will be used. HARDWARE, or for problems in the interaction of the SOFTWARE PRODUCT
(c) Backup Copy - You may make back-up copies of the SOFTWARE with non-DSC-SOFTWARE or HARDWARE PRODUCTS.
PRODUCT, but You may only have one copy per license installed at any (c) LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF RISK - IN
R

given time. You may use the back-up copy solely for archival purposes. ANY EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT
Except as expressly provided in this EULA, You may not otherwise make STATED IN THIS LICENSE AGREEMENT, DSC’S ENTIRE LIABILITY UNDER ANY
copies of the SOFTWARE PRODUCT, including the printed materials PROVISION OF THIS LICENSE AGREEMENT SHALL BE LIMITED TO THE
D

accompanying the SOFTWARE. GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO LICENSE THE
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00).
(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
may not reverse engineer, decompile, or disassemble the SOFTWARE LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,
PRODUCT, except and only to the extent that such activity is expressly THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
permitted by applicable law notwithstanding this limitation. You may not (d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE
make any changes or modifications to the Software, without the written
WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES,
permission of an officer of DSC. You may not remove any proprietary
notices, marks or labels from the Software Product. You shall institute
WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
reasonable measures to ensure compliance with the terms and conditions of OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF
this EULA. ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC
(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES NOR
single product. Its component parts may not be separated for use on more AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO
than one HARDWARE unit. MODIFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY
OTHER WARRANTY OR LIABILITY CONCERNING THIS SOFTWARE PRODUCT.
(c) Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with
(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO
HARDWARE, then the SOFTWARE PRODUCT is licensed with the
CIRCUMSTANCES SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
HARDWARE as a single integrated product. In this case, the SOFTWARE
CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF
PRODUCT may only be used with the HARDWARE as set forth in this EULA.
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR
(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You
may not make it available to others or post it on a server or web site.
ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT
LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY
(e) Software Product Transfer - You may transfer all of Your rights under this
ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR
EULA only as part of a permanent sale or transfer of the HARDWARE, provided
REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME,
You retain no copies, You transfer all of the SOFTWARE PRODUCT (including
PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES, INCLUDING
all component parts, the media and printed materials, any upgrades and this
CUSTOMERS, AND INJURY TO PROPERTY.
EULA), and provided the recipient agrees to the terms of this EULA. If the
SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior WARNING: DSC recommends that the entire system be completely tested on a
versions of the SOFTWARE PRODUCT. regular basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this SOFTWARE
(f) Termination - Without prejudice to any other rights, DSC may terminate this
PRODUCT to fail to perform as expected.
EULA if You fail to comply with the terms and conditions of this EULA. In such
WARNING Please Read Carefully
Not e t o I n st a l l e rs Any type of tampering whether intentional or unintentional such as
This warning contains vital information. As the only individual in con- masking, painting, or spraying of any material on the lenses, mirrors,
tact with system users, it is your responsibility to bring each item in this windows or any other part of the detection system will impair its proper
warning to the attention of the users of this system. operation.
System Failures Passive infrared motion detectors operate by sensing changes in temper-
This system has been carefully designed to be as effective as possible. ature. However their effectiveness can be reduced when the ambient
There are circumstances, however, involving fire, burglary, or other temperature rises near or above body temperature or if there are inten-
types of emergencies where it may not provide protection. Any alarm tional or unintentional sources of heat in or near the detection area.
system of any type may be compromised deliberately or may fail to Some of these heat sources could be heaters, radiators, stoves, barbe-
operate as expected for a variety of reasons. Some but not all of these cues, fireplaces, sunlight, steam vents, lighting and so on.
reasons may be:  Warning Devices
 Inadequate Installation Warning devices such as sirens, bells, horns, or strobes may not warn
A security system must be installed properly in order to provide ade- people or waken someone sleeping if there is an intervening wall or
quate protection. Every installation should be evaluated by a security door. If warning devices are located on a different level of the residence
professional to ensure that all access points and areas are covered. Locks or premise, then it is less likely that the occupants will be alerted or
and latches on windows and doors must be secure and operate as awakened. Audible warning devices may be interfered with by other
intended. Windows, doors, walls, ceilings and other building materials noise sources such as stereos, radios, televisions, air conditioners or
must be of sufficient strength and construction to provide the level of other appliances, or passing traffic. Audible warning devices, however
protection expected. A reevaluation must be done during and after any loud, may not be heard by a hearing-impaired person.
construction activity. An evaluation by the fire and/or police department  Telephone Lines
is highly recommended if this service is available.
Criminal Knowledge If telephone lines are used to transmit alarms, they may be out of service
This system contains security features which were known to be effective or busy for certain periods of time. Also an intruder may cut the tele-
at the time of manufacture. It is possible for persons with criminal intent phone line or defeat its operation by more sophisticated means which
to develop techniques which reduce the effectiveness of these features. may be difficult to detect.
It is important that a security system be reviewed periodically to ensure  Insufficient Time
that its features remain effective and that it be updated or replaced if it is There may be circumstances when the system will operate as intended,
found that it does not provide the protection expected. yet the occupants will not be protected from the emergency due to their
 Access by Intruders inability to respond to the warnings in a timely manner. If the system is
Intruders may enter through an unprotected access point, circumvent a monitored, the response may not occur in time to protect the occupants
sensing device, evade detection by moving through an area of insuffi- or their belongings.
cient coverage, disconnect a warning device, or interfere with or prevent  Component Failure
the proper operation of the system. Although every effort has been made to make this system as reliable as
 Power Failure possible, the system may fail to function as intended due to the failure of
Control units, intrusion detectors, smoke detectors and many other secu- a component.
rity devices require an adequate power supply for proper operation. If a  Inadequate Testing
device operates from batteries, it is possible for the batteries to fail. Most problems that would prevent an alarm system from operating as
Even if the batteries have not failed, they must be charged, in good con- intended can be found by regular testing and maintenance. The com-
dition and installed correctly. If a device operates only by AC power, plete system should be tested weekly and immediately after a break-in,
any interruption, however brief, will render that device inoperative an attempted break-in, a fire, a storm, an earthquake, an accident, or any
T
while it does not have power. Power interruptions of any length are kind of construction activity inside or outside the premises. The testing
often accompanied by voltage fluctuations which may damage elec- should include all sensing devices, keypads, consoles, alarm indicating
tronic equipment such as a security system. After a power interruption devices and any other operational devices that are part of the system.
AF

has occurred, immediately conduct a complete system test to ensure that  Security and Insurance
the system operates as intended. Regardless of its capabilities, an alarm system is not a substitute for
 Failure of Replaceable Batteries property or life insurance. An alarm system also is not a substitute for
This system’s wireless transmitters have been designed to provide sev- property owners, renters, or other occupants to act prudently to prevent
eral years of battery life under normal conditions. The expected battery or minimize the harmful effects of an emergency situation.
R

life is a function of the device environment, usage and type. Ambient

conditions such as high humidity, high or low temperatures, or large
temperature fluctuations may reduce the expected battery life. While Hereby, DSC, declares that this device is in compliance with the essential re-
D

each transmitting device has a low battery monitor which identifies quirements and other relevant provisions of Directive 1999/5/EC.
The complete R&TTE Declaration of Conformity can be found at http://
when the batteries need to be replaced, this monitor may fail to operate www.dsc.com/listings_index.aspx
as expected. Regular testing and maintenance will keep the system in (CZE) DSC jako výrobce prohlašuje, že tento výrobek je v souladu se všemi
good operating condition. relevantními požadavky sm?rnice 1999/5/EC.
 Compromise of Radio Frequency (Wireless) Devices (DAN) DSC erklærer herved at denne komponenten overholder alle viktige
krav samt andre bestemmelser gitt i direktiv 1999/5/EC.
Signals may not reach the receiver under all circumstances which could (DUT) Hierbij verklaart DSC dat dit toestel in overeenstemming is met de ei-
include metal objects placed on or near the radio path or deliberate jam- sen en bepalingen van richtlijn 1999/5/EC.
ming or other inadvertent radio signal interference. (FIN) DSC vakuuttaa laitteen täyttävän direktiivin 1999/5/EC olennaiset vaa-
timukset.
 System Users (FRE) Par la présente, DSC déclare que ce dispositif est conforme aux exi-
A user may not be able to operate a panic or emergency switch possibly gences essentielles et autres stipulations pertinentes de la Directive 1999/5/
due to permanent or temporary physical disability, inability to reach the EC.
device in time, or unfamiliarity with the correct operation. It is impor- (GER) Hierdurch erklärt DSC, daß dieses Gerät den erforderlichen Bedin-
gungen und Vorrausetzungen der Richtlinie 1999/5/EC entspricht.
tant that all system users be trained in the correct operation of the alarm (GRE) ˂˜˞ ˱ˬ˲ ˭˞ˮ˹˪˱ˬ˯ ˤ '6& ˡˤ˨˻˪ˢ˦ ˹˱˦ ˞˲˱˛ ˤ ˰˲˰˧ˢ˲˛ ˢ˜˪˞˦ ˰˺˩˳˶˪ˤ
system and that they know how to respond when the system indicates an ˩ˢ˱˦˯ˬ˲˰˦˻ˡˤ˯˞˭˞˦˱˛˰ˢ˦˯˧˞˦˩ˢ˹˨ˢ˯˱˦˯˙˨˨ˢ˯˰˴ˢ˱˦˧˚˯˞˪˞˳ˬˮ˚˯˱ˤ˯
alarm. ˍˡˤˠ˜˞˯(&
 Smoke Detectors ,7$ &RQ OD SUHVHQWH OD 'LJLWDO 6HFXULW\ &RQWUROV GLFKLDUD FKH TXHVWR SURGRW
WR ª FRQIRUPH DL UHTXLVLWL HVVHQ]LDOL HG DOWUH GLVSRVL]LRQL ULOHYDQWL UHODWLYH DOOD
Smoke detectors that are a part of this system may not properly alert 'LUHWWLYD&(
occupants of a fire for a number of reasons, some of which follow. The 125 '6& HUNO¨UHU DW GHQQH HQKHWHQ HU L VDPVYDU PHG GH JUXQQOHJJHQGH
smoke detectors may have been improperly installed or positioned. NUDYRJºYULJHUHOHYDQWHNUDYLGLUHNWLY()
Smoke may not be able to reach the smoke detectors, such as when the 32/'6&RĝZLDGF]DľHXU]ÇG]HQLHMHVWZ]JRGQRĝFL]]DVDGQLF]\PL
fire is in a chimney, walls or roofs, or on the other side of closed doors. Z\PDJDQLDPLRUD]SR]RVWDł\PLVWRVRZQ\PLSRVWDQRZLHQLDPL'\UHNW\Z\
:(
Smoke detectors may not detect smoke from fires on another level of 325 3RU HVWH PHLR D '6& GHFODUD TXH HVWH HTXLSDPHQWR HVW£ HP FRQIRU
the residence or building. PLGDGH FRP RV UHTXLVLWRV HVVHQFLDLV H RXWUDV GHWHUPLQD©·HV UHOHYDQWHV GD
Every fire is different in the amount of smoke produced and the rate of 'LUHFWLYD(&
burning. Smoke detectors cannot sense all types of fires equally well. 63$3RUODSUHVHQWH'6&GHFODUDTXHHVWHHTXLSRHVW£HQFRQIRUPLGDG
Smoke detectors may not provide timely warning of fires caused by FRQORVUHTXLVLWRVHVHQFLDOHV\RWURVUHTXLVLWRVUHOHYDQWHVGHOD'LUHFWLYD
(&
carelessness or safety hazards such as smoking in bed, violent explo- 6:('6&EHNU¦IWDUK¦UPHGDWWGHQQDDSSDUDWXSSI\OOHUGHY¦VHQWOLJD
sions, escaping gas, improper storage of flammable materials, over- NUDYHQRFKDQGUDUHOHYDQWDEHVW¦PPHOVHUL'LUHNWLYHW(&
loaded electrical circuits, children playing with matches or arson.
Even if the smoke detector operates as intended, there may be circum-
stances when there is insufficient warning to allow all occupants to
escape in time to avoid injury or death.
 Motion Detectors
Motion detectors can only detect motion within the designated areas as
shown in their respective installation instructions. They cannot discrimi-
nate between intruders and intended occupants. Motion detectors do not
provide volumetric area protection. They have multiple beams of detec-
tion and motion can only be detected in unobstructed areas covered by
these beams. They cannot detect motion which occurs behind walls,
ceilings, floor, closed doors, glass partitions, glass doors or windows.
 T
AF
R
D

© 2011 Tyco International Ltd. and its Respective Companies. All Rights Reserved.
Toronto, Canada • www.dsc.com • Printed in Canada

The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the
trademarks is strictly prohibited and Tyco International Ltd. will aggressively enforce its intellectual property rights to the fullest extent of the law,
including pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco International Ltd. are the property of their
respective owners, and are used with permission or allowed under applicable laws.
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all fea-
tures. Availability varies by region; contact your sales representative.

®
FCC COMPLIANCE STATEMENT Changes in Telephone Company Equipment or Facilities
CAUTION: Changes or modifications not expressly approved by The Telephone Company may make changes in its facilities,
Digital Security Controls could void your authority to use this equipment, operations or procedures that could affect the operation
equipment. of the equipment. If this happens the Telephone Company will
This equipment has been tested and found to comply with the limits provide advance notice in order for you to make necessary
for a Class B digital device, pursuant to Part 15 of the FCC Rules. modifications to maintain uninterrupted service.
These limits are designed to provide reasonable protection against Equipment Maintenance Facility
harmful interfer-ence in a residential installation. This equipment If trouble is experienced with this equipment (PC1404) for repair or
warranty information, contact the facility indicated below. If the
generates, uses and can radiate radio frequency energy and, if not
equipment is causing harm to the telephone network, the Telephone
installed and used in accordance with the instructions, may cause Company may request that you disconnect the equipment until the
harmful interference to radio communications. However, there is no problem is solved. This equipment is of a type that is not intended to
guarantee that interference will not occur in a particular installation. be repaired by the end user.
If this equipment does cause harmful interference to radio or DSC c/o APL Logistics 757 Douglas Hill Rd, Lithia Springs, GA
television reception, which can be deter-mined by turning the 30122
equipment off and on, the user is encouraged to try to correct the Additional Information
interference by one or more of the following measures: Connection to party line service is subject to state tariffs. Contact the
• Re-orient the receiving antenna. state public utility commission, public service commission or
• Increase the separation between the equipment and receiver. corporation commission for information. Alarm dialing equipment
• Connect the equipment into an outlet on a circuit different from must be able to seize the telephone line and place a call in an
that to which the receiver is connected. emergency situation. It must be able to do this even if other
equipment (telephone, answering system, computer modem, etc.)
• Consult the dealer or an experienced radio/television technician
already has the telephone line in use. To do so, alarm dialing
for help. equipment must be connected to a properly installed RJ-31X jack
The user may find the following booklet prepared by the FCC useful: that is electrically in series with and ahead of all other equipment
"How to Identify and Resolve Radio/Television Interference attached to the same telephone line. Proper installation is depicted in
Problems". This booklet is available from the U.S. Government the figure below. If you have any questions concerning these
Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4. instructions, you should consult your telephone company or a
The keypads represented in this manual can be used with the following qualified installer about installing the RJ-31X jack and alarm dialing
Control Unit: PC1404. equipment for you.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules and, if the
product was approved July 23, 2001 or later, the requirements
adopted by the ACTA. On the side of this equipment is a label that
contains, among other information, a product identifier. If
requested, this number must be provided to the Telephone
Company.
PC1404 Product Identifier US: F53AL01BPC1404
T
USOC Jack: RJ-31X
Telephone Connection Requirements
AF

+HUHE\ '6& GHFODUHV WKDW WKLV GHYLFH LV LQ FRPSOLDQFH ZLWK WKH HVVHQWLDO
A plug and jack used to connect this equipment to the premises UHTXLUHPHQWVDQGRWKHUUHOHYDQWSURYLVLRQVRI'LUHFWLYH(&


7KH FRPSOHWH 5 77( 'HFODUDWLRQ RI &RQIRUPLW\ FDQ EH IRXQG DW
wiring and telephone network must comply with the applicable KWWSZZZGVFFRPOLVWLQJVBLQGH[DVS[
&=( '6& MDNR Y¿UREFH SURKODģXMH ŀH WHQWR Y¿UREHN MH Y VRXODGX VH YģHPL
FCC Part 68 rules and requirements adopted by the ACTA. A UHOHYDQWQ¯PLSRŀDGDYN\VPÝUQLFH(&


compliant telephone cord and modular plug is provided with this '$1'6&HUNO¨UHUKHUYHGDWGHQQHNRPSRQHQWHQRYHUKROGHUDOOHYLNWLJHNUDYVDPW
DQGUHEHVWHPPHOVHUJLWWLGLUHNWLY(&
R

product. It is designed to be connected to a compatible modular '87 +LHUELM YHUNODDUW '6& GDW GLW WRHVWHO LQ RYHUHHQVWHPPLQJ LV PHW GH HLVHQ HQ
EHSDOLQJHQYDQULFKWOLMQ(&
jack that is also compliant. See installation instructions for details.


),1'6&YDNXXWWDDODLWWHHQW¦\WW¦Y¦QGLUHNWLLYLQ(&ROHQQDLVHWYDDWLPXNVHW
)5( 3DU OD SU«VHQWH '6& G«FODUH TXH FH GLVSRVLWLI HVW FRQIRUPH DX[ H[LJHQFHV
Ringer Equivalence Number (REN) HVVHQWLHOOHVHWDXWUHVVWLSXODWLRQVSHUWLQHQWHVGHOD'LUHFWLYH(&
D

*(5+LHUGXUFKHUNO¦UW'6&GD¡GLHVHV*HU¦WGHQHUIRUGHUOLFKHQ%HGLQJXQJHQXQG
The REN is used to determine the number of devices that may be 9RUUDXVHW]XQJHQGHU5LFKWOLQLH(&HQWVSULFKW


*5(˂˜˞˱ˬ˲˭˞ˮ˹˪˱ˬ˯ˤ'6&ˡˤ˨˻˪ˢ˦˹˱˦˞˲˱˛ˤ˰˲˰˧ˢ˲˛ˢ˜˪˞˦˰˺˩˳˶˪ˤ˩ˢ˱˦˯
connected to a telephone line. Excessive RENs on a telephone line ˬ˲˰˦˻ˡˤ˯˞˭˞˦˱˛˰ˢ˦˯˧˞˦˩ˢ˹˨ˢ˯˱˦˯˙˨˨ˢ˯˰˴ˢ˱˦˧˚˯˞˪˞˳ˬˮ˚˯˱ˤ˯ˍˡˤˠ˜˞˯(&


,7$ &RQ OD SUHVHQWH OD 'LJLWDO 6HFXULW\ &RQWUROV GLFKLDUD FKH TXHVWR SURGRWWR ª
may result in the devices not ringing in response to an incoming FRQIRUPH DL UHTXLVLWL HVVHQ]LDOL HG DOWUH GLVSRVL]LRQL ULOHYDQWL UHODWLYH DOOD 'LUHWWLYD
&(
call. In most but not all areas, the sum of RENs should not exceed 125'6&HUNO¨UHUDWGHQQHHQKHWHQHULVDPVYDUPHGGHJUXQQOHJJHQGHNUDYRJ
ºYULJHUHOHYDQWHNUDYLGLUHNWLY()
five (5.0). To be certain of the number of devices that may be 32/'6&RĝZLDGF]DľHXU]ÇG]HQLHMHVWZ]JRGQRĝFL]]DVDGQLF]\PLZ\PDJDQLDPL
connected to a line, as determined by the total RENs, contact the RUD]SR]RVWDĄ\PLVWRVRZQ\PLSRVWDQRZLHQLDPL'\UHNW\Z\:(
3253RUHVWHPHLRD'6&GHFODUDTXHHVWHHTXLSDPHQWRHVW£HPFRQIRUPLGDGH
local Telephone Company. For products approved after July 23, FRP RV UHTXLVLWRV HVVHQFLDLV H RXWUDV GHWHUPLQD©·HV UHOHYDQWHV GD 'LUHFWLYD
(&
2001, the REN for this product is part of the product identifier that


63$ 3RU OD SUHVHQWH '6& GHFODUD TXH HVWH HTXLSR HVW£ HQ FRQIRUPLGDG FRQ ORV
UHTXLVLWRVHVHQFLDOHV\RWURVUHTXLVLWRVUHOHYDQWHVGHOD'LUHFWLYD(&
has the format US: AAAEQ##TXXXX. The digits represented by


6:('6&EHNU¦IWDUK¦UPHGDWWGHQQDDSSDUDWXSSI\OOHUGHY¦VHQWOLJDNUDYHQRFK
DQGUDUHOHYDQWDEHVW¦PPHOVHUL'LUHNWLYHW(&
## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
For earlier products, the REN is separately shown on the label.
INDUSTRY CANADA STATEMENT
Incidence of Harm
NOTICE: This Equipment meets the applicable Industry Canada
If this equipment (PC1404) causes harm to the telephone network, Terminal Equipment Technical Specifications.
the telephone company will notify you in advance that temporary Le présent materiel est conforme aux specifications techniques
discontinuance of service may be required. But if advance notice is applicables d’Industrie Canada.
not practical, the Telephone Company will notify the customer as The Ringer Equivalence Number (REN) for this terminal equipment is 0.1.
soon as possible. Also, you will be advised of your right to file a L'indice d'équivalence de la sonnerie (IES) du présent matériel est de 0.1.
complaint with the FCC if you believe it is necessary. The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the re-
quirement that the sum of the RENs of all the devices does not exceed five.
This product is in conformity with EMC Directive 89/336/EEC L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal
based on results using harmonized standards in accordance with de terminaux qui peuvent être raccordés à une interface téléphonique. La ter-
article 10(5), R&TTE Directive 1999/5/EC based on following minaison d’une interface peut consister en une combinaison quelconque de
Annex III of the directive and LVD Directive 73/23/EEC as dispositifs, à la seule condition que la somme d’indices d’équivalence de la
amended by 93/68/EEC based on results using harmonized sonnerie de tous les dispositifs n’excède pas 5.
The term ’IC:’ before the radio certification number only signifies that
standards.
Industry Canada technical specifications were met.
This product meets the requirements of Class II, Grade 2 equipment
Certification number IC: 160A-PC1404
as per EN 50131-1:2004 Standard. This product is suitable for use in This Class B digital apparatus complies with Canadian ICES-003.
systems with the following notification options: Cet appareil numérique de la classe B est conforme à la norme NMB-
- A (use of two warning devices and internal dialer required), 003 du Canada.
- B (self powered warning device and internal dialer
required),
- D (use of DSC model T-Link TL250 encrypted
Ethernet communicator required