Scribd
Upload
437 views

Typical Detail of Slab: Schedule of RCC Slabs (Level: First Floor Slab)

The document provides details of reinforced concrete slab specifications for a building's first floor. It includes a typical slab detail diagram. It then lists 9 slab types (S1-S9) with their thicknesses and reinforcement bar spacing and type to be used along and across the span. It also specifies 3 stair slab types (ST1-ST3) with reinforcement details.

Uploaded by

Manju Birje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
437 views

Typical Detail of Slab: Schedule of RCC Slabs (Level: First Floor Slab)

The document provides details of reinforced concrete slab specifications for a building's first floor. It includes a typical slab detail diagram. It then lists 9 slab types (S1-S9) with their thicknesses and reinforcement bar spacing and type to be used along and across the span. It also specifies 3 stair slab types (ST1-ST3) with reinforcement details.

Uploaded by

Manju Birje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

L3/4

L1/4 L2/4 L2/4

L1/7 L1/5 L2/5 L2/5 L3/5


SLAB SLAB SLAB
L1 L2
L3

BEAM BEAM BEAM

TYPICAL DETAIL OF SLAB


SCHEDULE OF RCC SLABS (LEVEL: FIRST FLOOR SLAB)
TYPE THICKNESS STEEL ALONG SPAN STEEL ACROSS SPAN REMARKS
PROVIDE 1-T8 EXTRA IN BETWEEN
S1 5" T8 @ 6" C/C ALT BENT UP T8 @ 8" C/C DIST ALT BENTUP @ DISCONTINUOUS END
S2 5" T8 @ 5" C/C ALT BENT UP -
T8 @ 7" C/C DIST

S3 5" T8 @ 6" C/C ALT BENT UP -


T8 @ 6" C/C ALT BENT UP

S4 5" T8 @ 5" C/C ALT BENT UP -


T8 @ 8" C/C DIST

S5 5" T8 @ 7" C/C ALT BENT UP -


T8 @ 8" C/C DIST
PROVIDE 1-T8 EXTRA IN BETWEEN
S6 5" T10 @ 4" C/C ALT BENT UP T10 @ 5" C/C ALT BENT UP ALT BENTUP @ DISCONTINUOUS END
S7 5" T10 @ 5" C/C ALT BENT UP -
T8 @ 8" C/C DIST
PROVIDE 1-T8 EXTRA IN BETWEEN
S8 5" T10 @ 5" C/C ALT BENT UP T10 @ 6" C/C ALT BENT UP ALT BENTUP @ DISCONTINUOUS END
S9 5" T10 @ 5" C/C ALL STRAIGHT BAR -
MAIN STEEL FROM ST1,ST2

SO 5" T8 @ 4" C/C BENT BACK AT BOTTOM MIN. CANT. SPAN NEED
MAIN STEEL FROM S2,S4 PROVIDE IN BACK SPAN
ST1,ST2,ST3 7" PROVIDE SCISSOR JOINT
T10 @ 4" C/C ALT BENT UP T8 @ 6" C/C DIST @ RESP.UPPER LANDING
ST3 7" T10 @ 4" C/C ALT BENT UP MAIN STEEL FROM ST1,ST2 MIDLANDING

You might also like