®

Digital Timer
• Compact 17.5 mm Wide
• Multi Function: (8 or 18) Non Signal & Signal based functions
• Multi-Voltage: 24 - 240 VAC/DC
• Wide Timing Range: 0.1s to 999 Hr
• 3 Digit LCD for Preset time and Run time
• Option to select Up/Down counting
• Tamper proof with key lock feature

Ordering Information
Cat. No. Description
V0DDTS 24 - 240 VAC/DC, Multi Function Digital Timer - Eliro (8 Functions), 1 C/O
V0DDTD 24 - 240 VAC/DC, Multi Function Digital Timer - Eliro (8 Functions), 2 NO
V0DDTS1 24 - 240 VAC/DC, Multi Function Digital Timer - Eliro (18 Functions), 1 C/O
V0DDTD1 24 - 240 VAC/DC, Multi Function Digital Timer - Eliro (18 Functions), 2 NO

8
 ®
Digital Timer

Cat. No. V0DDTS V0DDTD V0DDTS1 V0DDTD1

Parameters
Timer Description Multi Function Digital Timer
Functions 1) ON Delay 1) ON Delay
2) Cyclic OFF/ON 2) Cyclic OFF/ON
3) Cyclic ON/OFF 3) Cyclic ON/OFF
4) Signal ON/OFF 4) Impulse on Energizing
5) Signal OFF Delay 5) Accumulative Delay on Signal
6) Interval 6) Accumulative Delay on Inverted Signal
7) Signal OFF/ON 7) Accumulative Impulse on Signal
8) One Shot Output 8) Signal ON Delay
9) Inverted Signal ON Delay
10) Signal OFF Delay
11) Impulse ON/OFF
12) Signal OFF/ON
13) Leading Edge Impulse 1
14) Leading Edge Impulse 2
15) Trailing Edge Impulse 1
16) Trailing Edge Impulse 2
17) Delayed Impulse
18) Inverted Signal ON Delay
Supply Voltage ( ) 24 - 240 VAC/DC
Supply Variation -15% to +10% (of )
Frequency 50/60 Hz
Power Consumption (Max.) 0.5 VA (@ 24/48 VAC), 4 VA (@ 110 to 265 VAC/DC)
Timing Range 0.1s to 999h
Reset Time 200 ms (Max.)
Repeat Accuracy ± 0.5%
Relay Output 1 C/O 2 NO 1 C/O 2 NO
Contact Rating 8A @ 240 VAC / 24 VDC (Resistive)
Output 5
Electrical Life 1x10
7
Mechanical Life 2x10
AC - 15 Rated Voltage (Ue): 125/240 V, Rated Current (Ie): 3/1.5 A
Utilization Category
DC - 13 Rated Voltage (Ue): 125/250 V, Rated Current (Ie): 2/0.22/0.1 A
Operating Temperature -10° C to +55° C
Storage Temperature -20° C to +65° C
Humidity (Non Condensing) 95% (Rh)
LED Indication Red LED Relay ON
Enclosure Flame Retardant UL94-V0
Dimension (W x H x D) (in mm) 18 X 85 X 76
Weight (unpacked) Approx. 85 g
Mounting DIN Rail
Certification
RoHS Compliant

Degree of Protection IP 20 for Terminals, IP 30 for Enclosure, IP 40 for Front side

EMI / EMC
Harmonic Current Emissions IEC 61000-3-2
ESD IEC 61000-4-2
Radiated Susceptibility IEC 61000-4-3
Electrical Fast Transients IEC 61000-4-4
Surges IEC 61000-4-5
Conducted Susceptibility IEC 61000-4-6
Voltage Dips & Interruptions (AC) IEC 61000-4-11
Voltage Dips & Interruptions (DC) IEC 61000-4-29
Conducted Emission CISPR 14-1
Radiated Emission CISPR 14-1

Environmental
Cold Heat IEC 60068-2-1
Dry Heat IEC 60068-2-2
Vibration IEC 60068-2-6
Repetitive Shock IEC 60068-2-27
Non-Repetitive Shock IEC 60068-2-27

9
 ®
Digital Timer

FUNCTIONAL DIAGRAMS FOR V0DDTS & V0DDTD : Supply Voltage, S: Input Signal, R: Relay Output
T: Preset Time, TON: Preset ON Time, TOFF: Preset OFF Time

ON DELAY ( A)
On application of supply voltage, the preset time duration
(T) starts. On completion of the preset time, the output is
switched ON and remains ON till the supply voltage is S
present R T

CYCLIC OFF/ON
{OFF Start, (Sym, Asym)} ( b)
On application of supply voltage, the output is initially
switched OFF for the preset ‘OFF’ time duration (TOFF)
after which it is switched ON for the preset ‘ON’ time S
duration (TON). This cycle repeats and continues till the R TOFF TON TOFF TON
supply is present.

CYCLIC ON/OFF
{ON Start, (Sym, Asym)} ( C)
On application of supply voltage, the output is initially
switched ON for the preset ‘ON’ time duration (TON)
after which it is switched OFF for the preset ‘OFF’ time S
duration (TOFF). This cycle repeats and continues till the R TON TOFF TON TOFF
supply is present.

SIGNAL ON/OFF ( d)
The output relay is turned ON for Preset Time (T)
whenever the Signal(S) is applied or removed.
S

R T T T T

SIGNAL OFF DELAY ( E)

On application of supply voltage and input signal, the
output is switched ON. When the signal is removed the
preset time duration commences & the output is S
switched OFF at the end of the time duration. R T

INTERVAL ( F)
When supply power is applied to the timer and on
application of input signal the output is immediately
switched ON. The output remains ON for the preset time S
duration (T) after which it is switched OFF. R T

SIGNAL OFF / ON ( G)
When Signal (S) is applied or removed, the relay
changes its state after Timer Duration (T)
S
R T T T T

ONE SHOT OUTPUT ( H)

When Signal (S) is applied, the Timer Duration (T) starts.
At the end of Timer duration (T), the relay gets energized
for approximately 1 sec.(Refer Note : 2) S
R T

Note: 1. For Power-On operation, connect the terminal B1 to A1 permanently.

2. If the Signal (S) changes during the Timer Duration (T), it does not change the output relay but re-triggering
takes places and the Timer Duration is extended.

10
 ®
Digital Timer

: Supply Voltage, S: Input Signal, R: Relay Output

FUNCTIONAL DIAGRAMS FOR V0DDTS1 & V0DDTD1
T: Preset Time, TON: Preset ON Time, TOFF: Preset OFF Time

ON DELAY [0] SIGNAL OFF DELAY [9]

On application of supply voltage, the On application of supply voltage and input
preset time duration (T) starts. On R T T signal, the output is switched ON. When S
completion of the preset time, the output is the signal is removed the preset time
switched ON and remains ON till the duration commences & the output is R T T
supply voltage is present. switched OFF at the end of the time
duration.

CYCLIC OFF/ON IMPULSE ON/OFF [A]

{OFF Start, (Sym, Asym)} [1] On application or removal of input signal,
On application of supply voltage, the R TOFF TON TOFF TON the output is switched ON & the preset time S
output is initially switched OFF for the duration (T) starts. On completion of the
preset ‘OFF’ time duration (TOFF) after which it is switched ON for the preset time duration the output is switched OFF. R T T T
‘ON’ time duration (TON). This cycle repeats and continues till the supply is When timing commences, changing the
present. state of the input signal resets the time.

CYCLIC ON/OFF SIGNAL OFF/ON [b]

{ON start, (Sym, Asym)} [2] On application of input signal, the preset
On application of supply voltage, the R TON TOFF TON TOFF delay time period (T) starts. On completion S
output is initially switched ON for the preset of the preset time, the output is switched
‘ON’ time duration (TON) after which it is switched OFF for the preset ‘OFF’ time ON. On removal of input signal, the preset R T T
duration (TOFF). This cycle repeats and continues till the supply is present. time period starts again and the output is
switched ON when the preset time duration
is complete.

IMPULSE ON ENERGIZING [3] LEADING EDGE IMPULSE1 [C]

On application of supply voltage, the output On application of input signal the output is
is instantly switched ON for the preset time R T T immediately switched ON. The output S
duration (T) after which it is switched OFF. remains ON for the preset time duration (T)
after which it is switched OFF. If the input R T T T
signal is removed during the preset time,
the output remains unaffected.

ACCUMULATIVE DELAY LEADING EDGE IMPULSE2 [d]

ON SIGNAL [4] On application of input signal the output is
On application of supply voltage, the S t1 t2 immediately switched ON. The output S
preset timing duration commences. When remains ON for the preset time duration (T)
input signal is applied, the timing pauses
R T+t1+t2 T after which it is switched OFF. If the input R T
and resumes only when the input signal is signal is removed during the preset time,
removed. The output is switched ON at the end of the preset time duration (T). the output is immediately switched OFF.

ACCUMULATIVE DELAY TRAILING EDGE IMPULSE1 [E]

ON INVERTED SIGNAL [5] When the input signal to the timer is
On application of supply voltage and input S t1 t2 removed, the output is immediately S
signal, the preset timing duration switched ON for the preset time duration
commences. When the signal is removed
R T+t1+t2 T (T) after which it is switched OFF. If the R T
the timing pauses and resumes when the input signal is applied during the preset
signal is applied. The output is switched ON at the end of the preset time time, the output is immediately switched OFF.
duration (T).

ACCUMULATIVE IMPULSE TRAILING EDGE IMPULSE2 [F]

ON SIGNAL [6] When the input signal to the timer is
On application of supply voltage the output S t1 t2 removed, the output is immediately S
is switched ON & the preset timing duration switched ON for the preset time duration
commences. When the signal is applied
R T+t1+t2 T (T) after which it is switched OFF. If the R T T
the timing pauses and resumes when the input signal is applied during the preset
signal is removed. The output is switched OFF at the end of the preset time time, the output remains unaffected.
duration (T).

SIGNAL ON DELAY [7] DELAYED IMPULSE [G]

On application of input signal, the preset On application of input signal, the preset
time duration (T) starts. On completion of S ‘OFF’ time duration (TOFF) starts. the S
the preset time, the output is switched ON output is switched ON at the end of the
and remains ON till the input signal is R T preset ‘OFF’ time duration & the preset ‘ON’ R TOFF TON
present time duration commences irrespective of
signal level and remains ON till the
completion of ‘TON’.

INVERTED SIGNAL ON DELAY [8] INVERTED SIGNAL

On application of supply voltage, the preset ON DELAY-TYPE 2 [H]
time duration (T) starts. When input signal S S
Timing starts only upon signal ‘S’ transition
is applied, the timing pauses & resumes high to low. During timing or after
only when the signal is removed. On R T completion of Time (i.e. relay on), any
R T
completion of the preset time, the output is signal transition is ignored. To reset the
switched ON. timer supply has to be interrupted.

11