1 Installation Notice 2 Physical Description 3 Download APP 4 Add IP Camera

Quick Installation Guide Package Contents Front panel To install the Foscam APP on your smartphone, you can choose either of
the following methods:
There are two ways, wired and wireless connection, for you to add IP
camera via Foscam APP. You can choose either of them:

Indoor HD IP Camera Speaker LENS 4.1 Wired Connection

LENS Infrared LED Scan QR code
Infrared LED
If you have a QR Code APP on your smartphone, scan the code
below.
Microphone
Speaker ANT

IP Camera Power Adapter Resource CD Ethernet Cable Microphone o

AUDIO
SD WPS

OUT IN

Quick Installation Guide

1. Connect the camera with power adapter, and wait for a moment.
Rear panel Foscam
Indoor HD IP Camera with P2P

Model: FI9821P/FI9831P Model: FI9826P Then the camera will play a sound “Hello, Foscam”.
2. Connect your camera with router by Ethernet cable, then the camera
Download from APP
Model: FI9815P/FI9816P

Model: FI9821P/FI9831P Model: FI9826P Mounting Bracket Wi-Fi Antenna Quick Installation Guide Warranty Card will play a sound ” Wired connection succeed”.
You can search the term “Foscam” directly on the APP Store or 3. Make sure your smartphone is connected to your wireless router.
Google Play Store. Then find the APP that appears with the same
4. Run the Foscam APP on your smartphone, register a Foscam
icon as shown above, and install it to your smartphone.
LAN Cloud account then log in. Please follow steps below to add your
Antenna
ANT

I / O Alarm
I / O Alarm ANT

Antenna
LAN
camera.
DC 5V
DC 5V
WPS AUDIO
IN/OUT Power
Micro SD

OU T IN
Input WPS OUT IN Micro SD

Micro SD Card Slot Before you continue, please note:

Security Warning
Power Output WPS
Micro SD Card Slot Network light
Make sure your wireless router is enabled DHCP, and connected to
My Cameras Setup Wizard Setup Wizard
Network light Add New Camera
Scan

Power light Please scan the QR code on

Power light WPS internet. your camera to add.
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.

Model: FI9815P/FI9816P Please change the password of your camera regularly, and use the Camera with alarm I/O
Make sure your smartphone is connected to your wireless router and Tap ‘+’ to add new camera
√

combination of numbers, letters and special characters. Connection succeeded！

Tap the camera in the list to

located near the camera.

Bottom view
watch live video.
轻触扫描二维码
Tap to scan QR Code

We recommend you to update your camera to the latest firmware Album

Mounting Port Reset Button

every three months, in order to ensure the safety of your camera and
have a better product experience. Tap here Tap here Scan the QR code Connection succeeded!
Please keep the username and password of your camera safe, and do
Note:
not tell them to others.
V1.7 If you have added your IP camera successfully by wired connection,
"Foscam" App download EQ983107 please do not add it again by wireless connection.
4.2 Wireless Connection
WiFi 5 Access the IP Camera 6 Hardware Installation Foscam cloud service Account / Password
8 Technical Support
Once succeeding in connecting your camera, you can access it via Foscam cloud service account / password is used to access Foscam If you have any problems with your Foscam IP Camera, please contact
SD

o
WPS
ANT
AUDIO

OUT IN
WPS

three different ways (Foscam cloud website, APP on smartphone, Web APP or Foscam cloud service website, you can register the account / the Foscam reseller you purchased from. If your problem still can’t be
UI). password on one of them. solved, please send your e-mail to the technical support team of Foscam
Note: Do not connect the camera with router via Ethernet cable.
headquarter at [email protected].
1. Connect the camera with power adapter, and wait for a moment. Foscam Cloud Service Storage Media Your valuable comments and suggestions on improving Foscam
Then the camera will play a sound “Hello, Foscam”.
Foscam Cloud

You can access camera via Foscam cloud website: www.myfoscam.com . products are welcomed!
2. Install the wireless antenna and make it upright, the camera will play Support cloud storage, NVR(Network Video Recorder), Micro SD card.
You can enjoy good experience on this website as below. If you hope to store the video for a whole day, it is suggested to use
a sound ”Ready for WiFi configuration”.
the Foscam NVR.
3. Make sure your smartphone is connected to your wireless router. It’s quite easy to access and manage all your IP cameras.
4. Run the Foscam APP on your smartphone, register a Foscam You can enjoy the latest feature firstly on the website. For example 1. Screw the mount on the wall with the two screws provided.
Firmware Upgrade
Cloud account then log in. Please follow steps below to add your you can use cloud storage, share your video, etc. 2. Loosen the thumb screws to adjust the mount to the desired position.
You can upgrade the firmware on Foscam APP with new feature
camera. Once the position is set, tighten the screws securely.
If you have already registered an account on Foscam APP, you can use "One-key Online Upgrade"(Enter Foscam APP, select “Settings >
My Cameras Setup Wizard Scan this account to log in and access the IP camera directly via browser. Firmware Upgrade”).
Add New Camera
Scan the
You also can download the latest version to upgrade your camera
Please scan the QR code on

Tap here
Please put the QR code within the frame. Put the

Tap here
your camera to add.
barcode outside the frame to avoid interference.

7 Important Notice
QR code
from office website http://www.foscam.com (Access the website,
Foscam APP
Tap ‘+’ to add new camera

Tap to scan QR Code select “Support > Firmware Downloads”).

Album
You can use Foscam APP to view the video on your camera anytime,
anywhere. Safety Tips
Note: Camera Username / Password
Please check the power adapter before using the camera.
You can experience new features, including EZLink, Online-Update, Message The camera username / password are used to access and manage
Please fix the camera and brackets with the provided locating screws CE Certificate Website:
Push, etc., ONLY on “Foscam” APP. Any other third-party APP, other than your camera on computer. They can improve the security of your
EZLink
EZLink Setup Wizard
to avoid falling down. http://www.foscam.com/company/ce-certificate.html
QR Code UID “Foscam”, can’t support all these new features. camera significantly. If you have forgotten either of them, you need
To avoid the risk of fire or electric shock, please keep your camera in
to press and hold the "Reset" button on the camera powered on.
NPU5YHSZSADVC59D111ABZZZ

The camera will

Connect your phone to Wi-Fi and input Wi-Fi

dry and cool place, do not let the camera be affected with damp.
password for camera to connect.

WLAN: √
play a sound
doc

Enter your Wi-Fi

Connection succeeded！

“Wireless After hearing the voice prompt, release the button. The camera will
Camera is electronic equipment, please keep it away from children.
Tap the camera in the list to
WLAN Password:

Web UI
watch live video.
轻触扫描二维码
password. Connection
Succeed” .
automatically reboot and the default settings will be restored. Then
CONNECT
Tap here Change your default port to a greater range to avoid hackers’
If you want to manage your camera more professionally, we suggest the default username / password become admin / (blank).
invasion. ShenZhen Foscam Intelligent Technology Co., Ltd
you to access your camera via browser. You can download the After restoring to the factory default settings, you need to delete the Check the logs of your Foscam cameras often. Foscam Cameras have
Note:
”Equipment Search Tool” from http://www.foscam.com to your camera from Foscam APP, and then add it again. embedded logs reminding you which IP addresses are accessing the
If you fail to add your camera to smartphone several times, press the . .264
264
www.foscam.com
computer, then access the camera directly via the search tool. camera.
“Reset” button on the camera to reset it, then try again.